First: When I try to edit my brightness it doesn't work at all. I can turn the LED on/off but when I do up down it brings up the status bar and nothing changes. Asus K60IJ T4400 is my laptop.
The other 'problem' is the MP3 codec? How do I install this? I'm trying to use my Mp3 files in Rhythm box but can't find out how. =[Why does it have to be different ;(
I Install Ubuntu 9.10 and I can't control Brightness, show brightness popup (Fn+F5F6) but screen brightness don't work, I install NVIDIA Driver Linux-x86_64 version 190.53, modiffed xorg.conf.
View 9 Replies View RelatedI added the Brightness Applet to the top panel, but when I change the brightness, nothing happens. D:I can't stand this, it's like my screen is stuck on supa-bright and it's hurting my eyes. When I load my PC up in Windows, the brightness control works just fine. But it doesn't seem to work on Ubuntu.
View 9 Replies View Relatedi use a HP Pavilion dv6-3016ax everything works perfectly and i am very happy with ubuntu! If i could get the Brightness keys to work and the microphone i'd be even better. The brightness FN keys change the slider but make no physical difference of the brightness. And the microphone just doesn't work.
View 1 Replies View RelatedAccording to the Community Documentation for a 6,2 running Maverick, the LCD brightness just "Works." I have mbp-nvidia-bl-dkms and pommed installed, but this has never worked for me.
View 9 Replies View RelatedFor some reason, right click on gnome menu in the panel and clicking "edit menus" doesn't work (nothing happens).Does anyone know a command in terminal that should bring the dialog up, so I can see if any errors take place
View 3 Replies View Relatedable to get an I pod nano 3rd gen 4gig to sync with Rhythm box or sync rhythm box back to the Ipod?
View 2 Replies View RelatedI recently upgraded from fc8. I am running two nvidia NVS 285 cards with four monitors and using nvidia driver 190.53-pkg1. I have one card up and running and can edit the config file and make to other two work I just can't get all four to work together.
View 3 Replies View RelatedI recently was able to network 2 computers at home and I wanted to make my password more secure. When I try to edit my password via System>Administration>Users and Groups, it doesn't workI am able to edit my user settings. When I change my password I enter my old one and it accepts my new one. Problem is when I try to install programs, login and do other things it only accepts my old password. How can I change my password?
View 3 Replies View RelatedWith my Kubuntu Hardy install there are plenty of settings I can change in Kaffeine but with Ubuntu Lucid I cannot adjust the brightness or add/remove items on the toolbars.
Is there some other way to change these settings ?
Kaffeine is excellent for watching and recording Dvb/T television (multiple channels etc).
I have already downloaded and installed the latest version of Adobe Flashplayer...
Quote:
But flash still doesn't work - there is no flash plugin in Firefox plugin list also.
I've tried to close-open Firefox, log out-log in, reboot - nothing.
OS Fedora 11 x64. I don't know, what am I doing wrong?
su to root,
init 3
no errors, no nothing acts like it take the command, but nothing happens.
trying to install nvidia drivers which won't run unless all the xwindows are shut down.
Nvidia either works or it doesn't work under Fedora 10 64 bit OS. I have re-installed Fedora 10 64 bit and Fedora 11 64 bit 10 times each and it's getting real old. I keep erasing my system because Nvidia doesn't want to work. Leighs post does no good on this issue and neither does anyone else's or else it would work.
View 2 Replies View RelatedOS: ubuntu10.04 LTS running on latest oracle virtualbox. This works: I have opened a ubuntu one account. And I can log into that account. But I have to do so by: clicking 'ubuntu one' in top bar, and click 'account' in prompt that appears. Shouldn't log in take place automatically? Being logged in I'm able to make new folders. And appearently able to enter them (they are empty I quess) If I try to upload a file clicking 'upload file' in ubuntu one. A prompt appears and I choose the file to upload and click 'continue'. The prompt says "uploading" but nothing happens. If I choose a document folder and click 'mouse click right'. And then click 'sync with ubuntu one'. It prompts that it syncs the folders. But nothing happens.
View 2 Replies View RelatedFedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
I have:
AMD Phenom 9650 Quad-Core Processor
nVidia GeForce 9500 GT graphics card
dual monitors
I installed F11 from the DVD iso. The nouveau driver seemed to work and I could get both monitors working with xrandr.
Then I tried to install the nvidia drivers. I installed akmod-nvidia.
They didn't work. I got this in my /var/log/Xorg.0.log:
Quote:
(II) LoadModule: "nvidia"
(II) Loading /usr/lib64/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
[Code].....
On my PC (fresh FC11 i386 instllataion from CDs), dhclient doesn't work. When it tries to get an IP address with dhclient, it gets No DHCPOFFERS reveived and fails. The ethernet of my PC works fine - I can manually set IP address, netmask, gateway etc. to connect to my persoal Linksys router, but if I change to DHCP, it fails as above. So it's not the problem of the ethernet driver of FC11. I suspect that dhclient of FC11 is buggy. (For the record, DHCP works fine on FC10 and Windows XP with my Linksys router.)
View 1 Replies View RelatedWhy my mouse doesn't work in console?
View 2 Replies View RelatedI have the Fedora 14 64bit Live CD on a 4GB USB Flash drive, via Live-USB-Creator. I have bootcamp installed on my Macbook Pro (5,5) with OSX, Windows 7, and Ubuntu already installed. I plan to install Fedora over the Ubuntu.
1.)So, when refit boots up, I choose the EFI USB (Fedora) and the Fedora screen comes up.
2.) I click any key to dismiss the auto boot
3.) I click "e" to edit the Fedora kernel, then I edit the first option and add the line "nomodeset"
4.) I press enter, and then "b" to boot that line. The screen kind of goes whack and a fair amount of super small (unreadable) text comes up on the screen and then just hangs with the blinking (_)
If I go into Grub via "c", and type in "nomodeset" it gives me an Error 27 Unrecognized command. And I've read online to press TAB to go into grub, but TAB does nothing for me.
I've installed the Awesome WM using "sudo yum install awesome" (as described here https://awesome.naquadah.org/wiki/Awesome-3-fedora ). I can also log into awesome, but nothing works! I can open the menu on the top left of the screen, but when I click on e.g. "Open Terminal", nothing happens. Same thing for all other menu options except "Shut down" which logs me out of Awesome. I've also tried the terminal shortcut, but nothing works.
Has anyone an idea how to make it work?
So I've been trying to install to an iSCSI target for the past two weeks and while the installation finishes, booting doesn't work. I get dropped to a shell after boot installation. I have seen some bugs on red hat bugzilla 705213, but don't know how to resolve it. I'm new to Fedora but really want to embrace the distro
View 2 Replies View RelatedI burned Fedora onto a disk, but when I turn on the system it just goes straight to the Windows XP login.
I thought it was something wrong with the disk or something like that, but when I pop in the disk on my Dad's laptop, the installation for Fedora runs perfectly.
Also, yes, I checked the order for booting and the CD drive comes before the hard drive.
I tried to upgrade to Leonidas from Cambridge, but didn't have enough space on the partition /, so I soft linked /var/cache/yum (or whatever) to a larger partition, but now the upgrade does not find the subdirectory called preupdate (it's there in the linked dir, checked). Is there any more sofisticated way around than changing parition sizes and copying and stuff?
View 4 Replies View RelatedHow to make the mics work on a Dell XPX M1330 laptop. This seems to be a common problem with built in mics on laptops. I've tried all the obvious things with alsamixer and pulseaudio.
View 1 Replies View RelatedI have an HP Pavilion m7480n PC with Windows XP installed on the C-drive. I successfully installed FC 12 onto the spare USB drive. When I rebooted the PC all I got was a blinking underscore at the extreme upper left position of a totally black screen. After a bit of experimenting I found that if I hit the F1 key during the boot process, go into the BIOS setup, do nothing within the setup, and press ESC to get out of the setup then the PC will go back into the boot cycle a second time. During the second time however a small text message appears with words to the effect "Press any key to enter GRUB..." after which the GRUB splash screen comes up with the choice for FC 12 or "Other" (referring to Win XP). At that point I can boot into either one.
View 4 Replies View RelatedI installed apache, php in my fedora 14.
phpinfo() works fine. But the following file 'a.php':
PHP Code:
<?php
if ( !file_put_contents( '/var/www/html/a.txt', 'aaa' ) ) {
echo 'Failed!';
# phpinfo();
} else {
echo 'Succeeded.';
[Code]....
I downloaded the Fedora 11 KDE livecd, installed it, and after the reboot when I get to that "firstboot" screen, I can't move the mouse, the keyboard doesn't work, I have to hold down the power button to turn off the computer.
View 11 Replies View RelatedI have problems with keyboard layout switcher. On Gnome everything works. But when I start to use other DE I can't switch keyboard layout by default. So I create xorg.conf, but anyway it doesn't work...
View 1 Replies View RelatedI've installed fc10 but I got some problem with the audio driver for my Dell Vostro 1700. In particular line input doesn't work correctly neither the built in microphone, neither the line input. Is there a special driver?
View 3 Replies View RelatedI have F15 fresh install on Samsung Q45. The brightness function key is recognized but doesn't really increase or decrease brightness. It is set to maximum.There was a workaround in F14 for same problem.
View 1 Replies View Related
