Fedora Installation :: How To Install Using Netinst.iso
Mar 22, 2010I just was wondering how can I install Fedora, using the netinst.iso? I cant seem to find some documentation on the subject. Must be overlooking something.
View 4 Replies
ADVERTISEMENT
Debian Installation :: Netinst - Fresh Installation Of Lenny Or Squeeze (either Or) And Not Install Exim?
Feb 26, 2010I haven't used Debian in 1 year or so and would like to know if there is any possible way to do a fresh installation of Debian Lenny or Squeeze (either or) and not install Exim? I get to the package selection section of the Debian Installer and I de-select "Desktop Environment" & "Standard System" so nothing is selected and it still be default installs Exim. Is there a way to omit this from the install?
View 9 Replies View RelatedDebian Installation :: Netinst Install Failing To Connect To Mirror
Jun 2, 2010I am trying to install debian from a netinst cd. Everything seems to go fine except when the installer needs to connect to a mirror. It doesn't throw up an error, it just hangs a bit and then seems to keep going a lot quicker than i would expect. For example, when installing additional software, it gets stuck downloading the first few files for about 5 mins and then skips ahead and finishes the entire process in about 5 mins.
What I end up with is a very bare bones system when I fist boot into it, without any of the stuff that I had indicated that I wanted to install (ie desktop environment, web server, etc). The Internet connection works and I am able to ping websites including a number of the mirrors I tried during the install. However when using apt-get it just gets stuck trying to connect to the mirror and doesn't go any further.
Debian Installation :: Netinst Failed To Install Grub - Error: Ntoskrnl.exe Missing Or Corrupt
May 28, 2010I installed lilo and it boots. How do I installed grub again. Do I just use synaptic manager to uninstall lilo and install grub?
[code]....
I know grub2 does not work, giving me error: ntoskrnl.exe missing or corrupt. I did install grub-legacy and it worked, but I had to re-install squeeze due to other problems. So, now I want to replace lilo with grub legacy.
Fedora Installation :: Upgrading With Netinst CD "Unable To Read Package Metadata..."
Dec 20, 2009I downloaded Fedora-12-x86_64-netinst.iso, burned a CD and booted it to upgrade my Fedora 11 system. It seemed to be working at first, but after it made a network connection and spun for a while, it displayed an error message which I scrawled down with a pen that looked something like this:
[Code].....
Debian :: No Internet With Fresh Netinst Install
Apr 16, 2010Recently, I did a netinst Debian install (on a C554US compaq presario), and while the net worked fine during install, I didn't seem to have a network connection (I use dhcp, mind you) or even an eth0 set up. I've used Debian before, but it was awhile back and I can't remember it all that well, but I DO remember having had net back then (previous version). I'm using Debian Testing, if that helps explain what might be wrong, and I can't help but feel it is my own mistake which caused it.
View 4 Replies View RelatedDebian Installation :: Netinst Bootable USB
Jul 26, 2014I download the lastest stable netinst, debian-7.6.0-ia64-netinst.iso.
And then proceed to follow these instructions.
4.3.1. Preparing a USB stick using a hybrid CD or DVD image
Code:
Select all# cp debian-7.6.0-ia64-netinst.iso /dev/sdb
# sync
Unfortunately, the USB will not boot.
The instructions I am following tell of creating "a second, FAT partition on the stick, mount the partition and copy or unpack the firmware onto it".
# mount /dev/sdX2 /mnt
# cd /mnt
# tar zxvf /path/to/firmware.tar.gz
# cd /
# umount /mnt
Debian Installation :: Kernel Warning During Netinst
Aug 9, 2010I noticed today I downloaded the amd64 netinst ISO for 'testing' and during the installation, it warned me of a the fact that I was installing using the 2.6.30.x kernel and I am now attempting to install a 2.6.32.x kernel. Is this is a common warning because I have never seen it before. I got it with both the netist & the businesscard image. Has anyone seen this before and is this a problem? Just trying to understand whats going on under the hood. I don't have the error in front of me since I am on my phone away from the office.
View 5 Replies View RelatedDebian Installation :: Netinst: Make Boot CD From Iso?
Aug 16, 2010I have a Redhat Enterprise Linux system and I want to re-make it as Debian. I downloaded the Debian netinst iso but can't seem to make a bootable CD out of it, and I haven't found any adequate explanations anywhere.
I tried burning the iso directly to a disk. i set up the boot order in my BIOS but when I restart the machine it spins the CD drive a few times and then moves on to the hard drive.
I tried expanding the iso into a directory, and then copying all those files into into the "Blank CD-R Disc" on my Gnome Desktop, burnt the CD, and still no boot.
I found some instructions using X3b, but X3b was giving me errors.
Debian Installation :: 6.0.5 Netinst ISO - Bad Archive Mirror
Jun 12, 2012Last week I installed the Debian 6.0.4 XFCE on to a system from an iso I burned to DVD. I had no problems.
Today I downloaded the 6.0.5 netinst iso and burned a CD to install on a system which has only a CD reader, not DVD. The install goes fine until I select a download mirror. No matter what mirror I select, I get "Bad Archive Mirror".
When I check the log in virtual console 4, the following message appears: "WARNING**: mirror does not support the specified release (squeeze)"...
Debian Installation :: Minimal Netinst Internet Access
Jul 30, 2014Fresh install without a desktop environment, I only selected "standard software utilities" from the software selection step of the installation process, nothing else is installed thereafter.
I cannot follow these instructions [URL] .... because "auto" and "iface" commands not found.
iptables isn't installed, but I want to install nftables since it's what iproute2 is to net-tools.
And it doesn't even have NetworkManager either and so far I found out ifconfig (net-tools) has been dropped in favor of iproute2, although that is just what Wikipedia says.
[URL] ....
"apt-cache search iproute2" revealed there is only iproute.
I just checked, net-tools is also installed, but ifconfig command not found?
Debian Installation :: Bzcat Missing On Netinst Error
Aug 28, 2014Using the mini.iso netinst image, when installing the the base system I get the following error:
Debootstrap error, the following error occurred: bzcat is not available on the system. Check vt4 for details, etc, etc.
Usually I have no issue at all installing a barebones sid system, but over the last week I've had the same error over and over.
The issue appears to of been resolved. I guess something server side was tweaked.
Debian Installation :: Ethernet Broadcom With Netinst Image?
Jul 6, 2010does someone know a workaround to solve this problem?[URL].. I'm trying to download all firmware on [URL]..I put them on usb key (they are about 12 files .deb) and, during the installation I choose "select driver from alternative" (or something like that) but never recognize it.Seems this card works with tg3 driver but i'm not sure.If there are no way to recognize it from installer, could someone please suggest me an alternative way to install testing on my notebook ?
View 6 Replies View RelatedDebian Installation :: Installation Through Netinst CD Image?
Oct 20, 2010i have it working in my computer but its just a text base.. how can i install a graphical interface for this please?
View 4 Replies View RelatedDebian Installation :: Testing Netinst Network Down On First Boot In Virtual Box
Jul 11, 2015I'm using the debian testing netinst image (from below url) and trying to install on virtualbox (part of a debian testing vagrant base box build pipeline I've got). This hasn't worked properly for last couple of weeks. Host system is also debian testing.URL....
if I accept all the defaults through the installer (apart from small details like timezone), I end up with a system in which the network does not work. It seems that /etc/network/interfaces has eth0 but the actual network card is called enp0s3, so no network comes up at first boot (despite that the network works fine during the actual install). I can easily fix it after the first boot by editing /etc/network/interfaces and replacing eth0 by enp0s3 and then doing an ifup. This is fine for a workaround but begs the question of why does it fail in the first place.
I have googled a bit and found this thread: [URL] .... which describes a similar issue, and there are other threads out there describing the change.
The udev change seems reasonable enough, but also some package involved in basic debian netinst installation has a bug given that the default install path results in a broken system. Question is, is there a bug already reported (I couldn't find it), or else, which package should I report the issue against? End result should be basic install does not require editing after boot to fix the network.
Debian Installation :: Daily Netinst Iso Can't Be Read For Boot On Virtualbox
Sep 17, 2010I am trying to build a test VM with VirtualBox 3.2.8, hosted on Ubuntu 10.04 amd64. I am trying to install Debian Squeeze from the daily build (specifically, from the following URL):
[URL]
(I've also tried the netinst ISO in the same directory.) The sha1sums are correct for each image.
When I start the VM, it refuses to boot, giving me the message "FATAL: No bootable medium found! System halted."
I would like to note that I've used VirtualBox for several years now, and GNU/Linux since 1995. So I have some experience in the field. (Of course experience is not much guard against brown-bag mistakes.) I've tried this same VM with an Ubuntu ISO (simply switching the attached ISO in the config), and it boots and installs OK.
Is there a known problem with the daily builds vs. VirtualBox?
Debian Installation :: Squeeze With Netinst-CD But Screen's Cracked Like Static?
Jun 13, 2011I was install my server (IBM x360) debian squeeze with netinst-CD but screen's cracked like static. (graphical or none both)
View 1 Replies View RelatedDebian Installation :: Jessie Netinst Fails For Chrome Book Pixel
Feb 8, 2015 I have been happily running Wheezy on the Chromebook Pixel with little or not issues. Recently I needed to re-install and decided to try Jessie. Again I was following the excellent instructions at [URL] .... except with the Jessie image.
However everytime I went to install it (after adding in the mem=4G line) it just rebooted and brought me back to the same install screen again. I just downloaded the Wheezy image again and it is installing now perfectly.
Debian Multimedia :: Dual Monitor Setup On Intel Chipset - Netinst Minimal Install
May 14, 2010I'm trying to get dual monitors working on a fresh install of debian from the netinst install cd. I did not allow the installer to download any packages and then manually installed xorg gnome-core & gdm using apt-get.
The monitors are plugged into the onboard vga and dvi ports of my motherboard. I believe the chipset is intel.
At the moment the displays are cloned.
I don't know much about xorg.
This is my xrandr output:
Debian :: Using Netinst For Testing / Squeeze?
Oct 1, 2010I've been trying out a distribution based on Debian Squeeze, but what I'd really like to try is a minimal Debian distribution I can build from the ground up and customize as needed. I heard a lot of positive things about using netinst on machines that are usually hard to get regular installation disks to work on. Downloaded netinst for i386 this week from a link at [URL].. and attempted to install from scratch on my machine. I got past formatting my disk and was at the base install step. It keeps complaining about corrupt programs it can't install. I ran a check of the CD disk from the menu and it says there are no issues with the disk itself. I can see some basic directories and cdebootstrap installed on my hard disk. Would like to jump to installing kernel and grub or something and attempt to download some of the other programs later, but it won't let me bypass the step. Saw some articles about a Debian from Scratch project on the Internet, but doesn't look like it's active any more. What's the best way to get a minimal Debian distribution based on Squeeze installed to a hard drive? Should I just wait until the official release?
View 6 Replies View RelatedDebian :: Squeeze 32 Bit Netinst Installer?
Sep 9, 2010The installer recognizes my wifi device but in order to connect to wifi I have to be able to use iwconfig to tell it that it has to connect to channel 11. If I don't do that it doesn't connect. The amd64 installer lists wireless tools in the list of extra tools to load, but for some reason the 32 bit installer doesn't. However wireless_tools...udeb is on the disk. What command would I use to load it manually from a console?
View 3 Replies View RelatedDebian :: Reinstall Grub Or Get Rescue Mode From Netinst.iso?
Jun 18, 2010I installed debian testing from hard disk using the netinst.iso. Now how can i get the rescue mode to reinstall grub? During installation i didn't get other options like rescue mode.It guided me to install debian testing from hard disk only.
View 2 Replies View RelatedDebian :: Installing Minimal Gnome-shell After Stretch Netinst?
Jan 27, 2016I've just installed debian testing on my computer (netinst AKA basic shell version). Now, how do I do a minimal gnome install? Minimal means, I don't need libreoffice or any extra bloat. However, I do want nautilus, gnome-settings-daemon and networkmanager (and of course, firefox!).
Also, is audio included or not in gnome-shell?
If I just install the gnome-shell package (with --no-install-recommends package), will it pull in gdm, Xorg, etc. or do I have to install them separately? Also, need to confirm whether my sources.list is properly set or not:
Code: Select alldeb http://ftp.security.debian.org/debian/ stretch main non-free contrib
deb http://security.debian.org/debian-security stretch/updates main
Debian :: Difference Between 'Netinst' & 'Business-card' Besides Size Being Smaller?
Nov 2, 2010I have been using Debian on and off since Sarge and it's not as long as most people but since I can remember, the installer has always had some issues and I was wondering if you guys who use Debian religiously could answer these questions for me:
1. Difference between "Netinst" & "Business-card" besides the size being smaller? It seems like the Netinst installs two different kernels. One dated kernel to get the system up and running and then it downloads the latest one where I think the 'Business-card' ISO simply downloads the latest kernel and nothing more which seems preferred. Am I wrong?
2. After I install using "Netinst", why when I immediately perform an 'apt-get dist-upgrade' are there multiple packages to upgrade? I thought the whole point was to install fresh updated packages, no?
3. Why has nobody fixed the installer progress bar from hanging on 33%? As far as I have been using / installing Debian, the installer progress bar is always stuck on 33% & it still installs fine but never shows the user it's exact progress. I would think the developers would have resolved this after 4 years by now...
Debian :: Easiest Way To Make A Bootable Pendrive Of Stable I386 Netinst?
Jan 4, 2010Which is bit tricky (I learn slowly linux unfortunately due to low skills in informatics)
The cdrom debian installer to be put is located here,
http://cdimage.debian.org/debian-cd/...86-netinst.iso
I tried unetbootin to make this pendrive, and it seems to be working, but not perfect. it hangs after the territory, saying that nothing into /cdrom is mounted.
Without unetbootin, how should we do to make a pendrive iso-cd/debian-503-i386-netinst-like bootable?
Debian Configuration :: Networking - Netinst CD - Internet Connection Only Works After Edit The Interfaces And Resolv.conf Files Manually
Aug 3, 2010I had some trouble with the netinst CD and I had to install lenny with the 6DVDs instead. My internet connection only works after I edit the interfaces and resolv.conf files manually. So my question is: can I do that from the netinst CD before it actually needs the connection to install everything? (otherwise I'll just need to use the DVDs.
View 4 Replies View RelatedFedora Installation :: Error At Post Install Scripts For Fedora 10 Kickstart Installation
Nov 18, 2009I am trying to install fedora 10 kickstart on my server.But I can't, because my kickstart installation hangs at post install scripts.It is not showing any message & stopped.
View 1 Replies View RelatedFedora Installation :: Install Fedora 12 I386 Using CD#1 For A Minimal Install?
Dec 19, 2009I'm trying to install Fedora 12 i386 using CD#1 for a minimal install. For that during installation I selected only Base. For some reason when I started installation it was trying to install 432 packages (Base has got about 80 or so packages). i can understand there might be some dependencies, but really that much? I kept going with the installation of 432 packages, but it finally failed on gtk2-immodule-xim-2.18.3-19.fc12.i686.rpm.I need just minimal install, so I can install LXDE later on by myself.
View 11 Replies View RelatedFedora Installation :: F11 - Graphical Install Fails - Text Install Has No Fdisk
Jun 28, 2009I have been using Redhat/Fedora for 11 years. I don't understand why Fedora 11, can't even do a vga graphical install, when Windows can.
I tried many parameters, including xdriver=vesa, and it cannot used graphical install.
So, I tried text install, which I have done many times in the past.
However, F11 seems crippled, in that it will NOT do the same install achievable from a graphical install.
It will NOT allow the use of fdisk, and it will NOT allow any selection of any packages.
What is the point of this option?
Even after trying all of this, for a dual boot install, and F11 claims to have installed, there is no grub or equivalent, and the computer just boots windows, just like Fedora 11 did absolutely nothing.
What are the options now? Why is text install so crippled and incomplete? Why is standard VGA mode so hard?
Fedora Installation :: Transfer Install Image To USB Drive, Then Install?
Dec 10, 2009I don't have a working DVD burner. I'd like to transfer the FC12 install DVD image to a USB thumb drive, and install from there. Is that reasonably easy to do?ow would I transfer the .iso file for the install image to the USB thumb drive in such a way that I could boot from i
View 1 Replies View Related