Debian :: Using Netinst For Testing / Squeeze?
Oct 1, 2010
I've been trying out a distribution based on Debian Squeeze, but what I'd really like to try is a minimal Debian distribution I can build from the ground up and customize as needed. I heard a lot of positive things about using netinst on machines that are usually hard to get regular installation disks to work on. Downloaded netinst for i386 this week from a link at [URL].. and attempted to install from scratch on my machine. I got past formatting my disk and was at the base install step. It keeps complaining about corrupt programs it can't install. I ran a check of the CD disk from the menu and it says there are no issues with the disk itself. I can see some basic directories and cdebootstrap installed on my hard disk. Would like to jump to installing kernel and grub or something and attempt to download some of the other programs later, but it won't let me bypass the step. Saw some articles about a Debian from Scratch project on the Internet, but doesn't look like it's active any more. What's the best way to get a minimal Debian distribution based on Squeeze installed to a hard drive? Should I just wait until the official release?
View 6 Replies
ADVERTISEMENT
Jul 11, 2015
I'm using the debian testing netinst image (from below url) and trying to install on virtualbox (part of a debian testing vagrant base box build pipeline I've got). This hasn't worked properly for last couple of weeks. Host system is also debian testing.URL....
if I accept all the defaults through the installer (apart from small details like timezone), I end up with a system in which the network does not work. It seems that /etc/network/interfaces has eth0 but the actual network card is called enp0s3, so no network comes up at first boot (despite that the network works fine during the actual install). I can easily fix it after the first boot by editing /etc/network/interfaces and replacing eth0 by enp0s3 and then doing an ifup. This is fine for a workaround but begs the question of why does it fail in the first place.
I have googled a bit and found this thread: [URL] .... which describes a similar issue, and there are other threads out there describing the change.
The udev change seems reasonable enough, but also some package involved in basic debian netinst installation has a bug given that the default install path results in a broken system. Question is, is there a bug already reported (I couldn't find it), or else, which package should I report the issue against? End result should be basic install does not require editing after boot to fix the network.
View 11 Replies
View Related
Sep 9, 2010
The installer recognizes my wifi device but in order to connect to wifi I have to be able to use iwconfig to tell it that it has to connect to channel 11. If I don't do that it doesn't connect. The amd64 installer lists wireless tools in the list of extra tools to load, but for some reason the 32 bit installer doesn't. However wireless_tools...udeb is on the disk. What command would I use to load it manually from a console?
View 3 Replies
View Related
Jun 13, 2011
I was install my server (IBM x360) debian squeeze with netinst-CD but screen's cracked like static. (graphical or none both)
View 1 Replies
View Related
Feb 26, 2010
I haven't used Debian in 1 year or so and would like to know if there is any possible way to do a fresh installation of Debian Lenny or Squeeze (either or) and not install Exim? I get to the package selection section of the Debian Installer and I de-select "Desktop Environment" & "Standard System" so nothing is selected and it still be default installs Exim. Is there a way to omit this from the install?
View 9 Replies
View Related
Apr 9, 2011
just installed testing on my netbook. my sources.list file all say wheezy. it was my impression that debian testings nickname was squeeze. are wheezy and squeeze the same thing?
View 14 Replies
View Related
Apr 13, 2011
Just switched from stable to testing. To run a pure testing, can someone tell me if I have all the necessary repos below?
deb http://www.debian-multimedia.org testing main non-free
deb http://getswiftfox.com/builds/debian unstable non-free
deb http://ftp.debian.org/debian testing main contrib non-free
deb http://security.debian.org/ testing/updates main contrib non-free
deb http://www.debian-multimedia.org testing main non-free
deb http://mozilla.debian.net/ squeeze-backports iceweasel-4.0
View 5 Replies
View Related
Feb 16, 2011
I'm wondering about this because I'm considering doing this myself. Specifically, I'd like to know if your wireless configurations survived the upgrade or not. Meaning, where they removed, altered, or hopefully, where they preserved as they where?
Also if anyone knows of a good link regarding this particular upgrade, by all means please share. I have only been able to dig up a bit of dirt on the topic but they were concerning older Debian releases. Maybe theres not much difference?
View 5 Replies
View Related
Feb 9, 2011
I have an older system that has been running testing for about 4 years. Originally I was running testing for several packages that were not yet available in stable. However, now that this system has a more crucial role in the network I have considered moving it to stable in hopes that it I can gain some insurance on it's uptime. It is important to note that I have never had a problem with the testing distribution and would be quite content to continue running it; I do want to know my options though.
I have not yet updated the system since the stable release of squeeze, I am considering to change my sources from testing to stable and just let apt take care of the rest. Anyone have any experience with such a thing? After searching Google I have found some solutions to force a downgrade, but that is really not what needs to be done here. I suppose I should have switched my sources to squeeze some time ago and this probably would have worked itself out.
A similar question is what happens a couple of years from now when another release happens. Have you had good luck updating from old stable to stable? I've run testing on several machines now for several years and have went through freezes and dist-upgrades several times with no major problems at all. Will I see the same stability if I move to the stable distribution?
View 1 Replies
View Related
May 16, 2010
so, if i change my repos from squeeze to testing and just keep updating after squeeze goes stable would i be asking for trouble?
i ask because when i dist-upgraded from lenny to squeeze i had some breakage - i figure if i just stay with testing i'm thinking it'll just update gradually.
View 8 Replies
View Related
Nov 4, 2010
I am still getting the error that no kernel modules are found when trying to load components from the CD on the multi-arch version of Squeeze. Are these even tested prior to releasing them? I mean I know it's testing but I thought we were reaching a release-date and the installer is 100% broken and has been for months. I have a pile of useless multi-arch CDs for Squeeze that won't install on 64bit or 32bit machines due to not finding the kernel modules. Can we get some testing on the installer portion of Squeeze?
View 3 Replies
View Related
Feb 9, 2011
I need to get [URL] (it's down now, the package is marked as "squeeze(testing)" into installed squeeze system.
What is the corresponding sources.list line for squeeze/testing? Without any results (apt-get update && apt-cache search log4c) tried those: [URL]
View 3 Replies
View Related
Jun 30, 2010
For anyone using Blueman with Testing (Squeeze), todays Python upgrade to version 2.6 stops it from working due to a Blueman bug. This has been fixed in blueman version 1.21-4, which you can install from SID if you don't want to wait the 10 days for the normal migration.
View 1 Replies
View Related
Dec 28, 2009
Anyone out there running Debian testing/squeeze?
Is Java running in your browsers properly? I just want to make sure I'm not alone. I'm sure a recent update caused the problem. A future update will probably fix it.
Java applets have stopped working on my main desktop and laptop. The server running stable/lenny works fine. Fedora and Ubuntu installed on the laptop also work fine.
Java applications such as JAlbum work without any problems.
Only Java applets in the browsers fail. Iceweasel, Epiphany, and Opera all fail.
It fails on my internal site.
I get the same error at Test Your Java Version And How do I test whether Java is working
But this one works.
View 11 Replies
View Related
May 22, 2010
Choising an hardware in LINUX is not easy since one has to check before whether it is supported. A large hardware base is supported , but not everything.
Which webcam is sponsored by DEBIAN TESTING that works surely with just a plug and play (skype / camorama...) ?
After a required:
Code:
View 4 Replies
View Related
Jan 29, 2011
Could someone give me the steps to installing/enabling the newest Flash 10 in Debian Testing/Squeeze?I want to install via the steps one would do from Adobe's website.IT DOES NOT WORK.IT DIDN'T WORK FOR ME.I just want to install the routine way that is usually done in Linux but when I downloaded it, I was asked to extract it and I have no idea where it got extracted to.Can anyone help?I don't mind starting from scratch.I don't remember how to do this method.I'm used to the 'non-free' package in the repo but Flash 10 is no longer working so I want to use the 'sure' method.
View 5 Replies
View Related
Apr 22, 2011
When updating from the last Debian Live image (Squeeze) to the current Debian testing, apt announces a lot of packages being not required:
The following packages were automatically installed and are no longer required:
openoffice.org-draw libpcsclite1 libwpd8c2a usb-modeswitch gtk2-engines-smooth dnsmasq-base tomboy
libmono-security2.0-cil libgsf-1-common update-notifier-common libndesk-dbus1.0-cil libmtp8 libmono-addins-gui0.2-cil
gnome-js-common pnm2ppa libavutil49 libhal-storage1 libmono-system2.0-cil update-notifier python-mako
openoffice.org-officebean openoffice.org-emailmerge network-manager-gnome openoffice.org-impress gdebi libgpod-common
[Code]...
These include some important packages, like network-manager-gnome for example. Was it really intended to be removed? Without it, it's impossible to manage network connections from Gnome (only manual option of editing interfaces config is left). Is it a bug, or some incomplete intention? apt suggests to autoremove these packages. Should they all be retained, or only some of them, or it's supposed to be none? Removing some of them makes sense for me (like Epiphany for example), but some not at all.
View 3 Replies
View Related
Mar 24, 2010
The strangest thing happened. I installed Debian testing with the "squeeze Alpha1" netinstall cd. All seemed to go well and the installer made me pick a root password and create a normal user account. However, after the first boot my user account did not work and I could also not login as root, it looked liked I forgot the passwords for both accounts. When rebooted in recovery mode, I got Code: sulogin: root account is locked and I was automatically logged in as root without being asked for a password. Then I found out that the normal user account does not exist. I created a user acount and logged into it. I did passwd to set a password, but I got Code: passwd: Authentication token manipulation error Also, there was no home directory for the new user.
View 6 Replies
View Related
Apr 20, 2011
I have just installed squeeze and I changed my source.list from squeeze to testing then did dist-upgrade/upgrade.After using for a while, I notice that apt tells me there are many packages no longer requires, all of them are default packages in Debian GNOME. If I use 'apt-get autoremove', of course, I lose almost everything in my GNOME desktop.Why apt tells me those packages are no longer required? It's ok or something is broken in my system? I switched from stable repo to testing repo several times before, but this is the first time I face this problem
View 4 Replies
View Related
May 7, 2010
What is the difference between Sid (unstable) and Squeeze (testing)?
Is it better to download Squeeze(testing) rather than Lenny(stable) because the software is more up to date?
Or would I want to get Sid? How unstable is it?
This is for a desktop by the way.
View 6 Replies
View Related
Feb 28, 2009
I am a ubuntu user but I want to go to the next level to use debian because what I heard of it, but I get confused to what to install on my computer do I install debian testing or debain stable with testing repositories.
- I want to use this system to the home use only.
- I want to use the newest packages because the stable packages is too old to use.
- What about using more than one repository i.e stable with testing with unstable at the same time (the same sourcelist)
- Is the testing and unstable sid packages good enough for the home use?
View 5 Replies
View Related
Jul 26, 2014
I download the lastest stable netinst, debian-7.6.0-ia64-netinst.iso.
And then proceed to follow these instructions.
4.3.1. Preparing a USB stick using a hybrid CD or DVD image
Code:
Select all# cp debian-7.6.0-ia64-netinst.iso /dev/sdb
# sync
Unfortunately, the USB will not boot.
The instructions I am following tell of creating "a second, FAT partition on the stick, mount the partition and copy or unpack the firmware onto it".
# mount /dev/sdX2 /mnt
# cd /mnt
# tar zxvf /path/to/firmware.tar.gz
# cd /
# umount /mnt
View 6 Replies
View Related
Aug 9, 2010
I noticed today I downloaded the amd64 netinst ISO for 'testing' and during the installation, it warned me of a the fact that I was installing using the 2.6.30.x kernel and I am now attempting to install a 2.6.32.x kernel. Is this is a common warning because I have never seen it before. I got it with both the netist & the businesscard image. Has anyone seen this before and is this a problem? Just trying to understand whats going on under the hood. I don't have the error in front of me since I am on my phone away from the office.
View 5 Replies
View Related
Aug 16, 2010
I have a Redhat Enterprise Linux system and I want to re-make it as Debian. I downloaded the Debian netinst iso but can't seem to make a bootable CD out of it, and I haven't found any adequate explanations anywhere.
I tried burning the iso directly to a disk. i set up the boot order in my BIOS but when I restart the machine it spins the CD drive a few times and then moves on to the hard drive.
I tried expanding the iso into a directory, and then copying all those files into into the "Blank CD-R Disc" on my Gnome Desktop, burnt the CD, and still no boot.
I found some instructions using X3b, but X3b was giving me errors.
View 8 Replies
View Related
Jun 12, 2012
Last week I installed the Debian 6.0.4 XFCE on to a system from an iso I burned to DVD. I had no problems.
Today I downloaded the 6.0.5 netinst iso and burned a CD to install on a system which has only a CD reader, not DVD. The install goes fine until I select a download mirror. No matter what mirror I select, I get "Bad Archive Mirror".
When I check the log in virtual console 4, the following message appears: "WARNING**: mirror does not support the specified release (squeeze)"...
View 14 Replies
View Related
Apr 16, 2010
Recently, I did a netinst Debian install (on a C554US compaq presario), and while the net worked fine during install, I didn't seem to have a network connection (I use dhcp, mind you) or even an eth0 set up. I've used Debian before, but it was awhile back and I can't remember it all that well, but I DO remember having had net back then (previous version). I'm using Debian Testing, if that helps explain what might be wrong, and I can't help but feel it is my own mistake which caused it.
View 4 Replies
View Related
Jun 18, 2010
I installed debian testing from hard disk using the netinst.iso. Now how can i get the rescue mode to reinstall grub? During installation i didn't get other options like rescue mode.It guided me to install debian testing from hard disk only.
View 2 Replies
View Related
Jul 30, 2014
Fresh install without a desktop environment, I only selected "standard software utilities" from the software selection step of the installation process, nothing else is installed thereafter.
I cannot follow these instructions [URL] .... because "auto" and "iface" commands not found.
iptables isn't installed, but I want to install nftables since it's what iproute2 is to net-tools.
And it doesn't even have NetworkManager either and so far I found out ifconfig (net-tools) has been dropped in favor of iproute2, although that is just what Wikipedia says.
[URL] ....
"apt-cache search iproute2" revealed there is only iproute.
I just checked, net-tools is also installed, but ifconfig command not found?
View 4 Replies
View Related
Aug 28, 2014
Using the mini.iso netinst image, when installing the the base system I get the following error:
Debootstrap error, the following error occurred: bzcat is not available on the system. Check vt4 for details, etc, etc.
Usually I have no issue at all installing a barebones sid system, but over the last week I've had the same error over and over.
The issue appears to of been resolved. I guess something server side was tweaked.
View 0 Replies
View Related
Jul 6, 2010
does someone know a workaround to solve this problem?[URL].. I'm trying to download all firmware on [URL]..I put them on usb key (they are about 12 files .deb) and, during the installation I choose "select driver from alternative" (or something like that) but never recognize it.Seems this card works with tg3 driver but i'm not sure.If there are no way to recognize it from installer, could someone please suggest me an alternative way to install testing on my notebook ?
View 6 Replies
View Related
