Debian Installation :: Testing Netinst Network Down On First Boot In Virtual Box
Jul 11, 2015
I'm using the debian testing netinst image (from below url) and trying to install on virtualbox (part of a debian testing vagrant base box build pipeline I've got). This hasn't worked properly for last couple of weeks. Host system is also debian testing.URL....
if I accept all the defaults through the installer (apart from small details like timezone), I end up with a system in which the network does not work. It seems that /etc/network/interfaces has eth0 but the actual network card is called enp0s3, so no network comes up at first boot (despite that the network works fine during the actual install). I can easily fix it after the first boot by editing /etc/network/interfaces and replacing eth0 by enp0s3 and then doing an ifup. This is fine for a workaround but begs the question of why does it fail in the first place.
I have googled a bit and found this thread: [URL] .... which describes a similar issue, and there are other threads out there describing the change.
The udev change seems reasonable enough, but also some package involved in basic debian netinst installation has a bug given that the default install path results in a broken system. Question is, is there a bug already reported (I couldn't find it), or else, which package should I report the issue against? End result should be basic install does not require editing after boot to fix the network.
View 11 Replies
ADVERTISEMENT
Oct 1, 2010
I've been trying out a distribution based on Debian Squeeze, but what I'd really like to try is a minimal Debian distribution I can build from the ground up and customize as needed. I heard a lot of positive things about using netinst on machines that are usually hard to get regular installation disks to work on. Downloaded netinst for i386 this week from a link at [URL].. and attempted to install from scratch on my machine. I got past formatting my disk and was at the base install step. It keeps complaining about corrupt programs it can't install. I ran a check of the CD disk from the menu and it says there are no issues with the disk itself. I can see some basic directories and cdebootstrap installed on my hard disk. Would like to jump to installing kernel and grub or something and attempt to download some of the other programs later, but it won't let me bypass the step. Saw some articles about a Debian from Scratch project on the Internet, but doesn't look like it's active any more. What's the best way to get a minimal Debian distribution based on Squeeze installed to a hard drive? Should I just wait until the official release?
View 6 Replies
View Related
Aug 16, 2010
I have a Redhat Enterprise Linux system and I want to re-make it as Debian. I downloaded the Debian netinst iso but can't seem to make a bootable CD out of it, and I haven't found any adequate explanations anywhere.
I tried burning the iso directly to a disk. i set up the boot order in my BIOS but when I restart the machine it spins the CD drive a few times and then moves on to the hard drive.
I tried expanding the iso into a directory, and then copying all those files into into the "Blank CD-R Disc" on my Gnome Desktop, burnt the CD, and still no boot.
I found some instructions using X3b, but X3b was giving me errors.
View 8 Replies
View Related
Sep 17, 2010
I am trying to build a test VM with VirtualBox 3.2.8, hosted on Ubuntu 10.04 amd64. I am trying to install Debian Squeeze from the daily build (specifically, from the following URL):
[URL]
(I've also tried the netinst ISO in the same directory.) The sha1sums are correct for each image.
When I start the VM, it refuses to boot, giving me the message "FATAL: No bootable medium found! System halted."
I would like to note that I've used VirtualBox for several years now, and GNU/Linux since 1995. So I have some experience in the field. (Of course experience is not much guard against brown-bag mistakes.) I've tried this same VM with an Ubuntu ISO (simply switching the attached ISO in the config), and it boots and installs OK.
Is there a known problem with the daily builds vs. VirtualBox?
View 12 Replies
View Related
Oct 8, 2010
I just installed the Debian testing release(with LXDE) from this week. Everything works great except the network card. I know the network card works because Windows and the Parted Magic Live cd recognize it. Also "lspci" seems to list the card, but when I fire "ifconfig -a" it is not listed there.
View 12 Replies
View Related
Sep 14, 2010
I'm trying to install Debian-testing to an ASUS 1018P netbook on which I have successfully installed Arch in the past. I'm installing from an external DVD drive and when I get to the point of network configuration it fails. I'm connected via Ethernet via eth0 which is recognized. Here is the last part of the ouput:
kernel: [ 1807.932848] atl1c 0000:01:00.0: irq 29 for MSI/MSI-X
kernel: [ 1807.933453] ADDRCONF(NETDEV_UP): eth0: link is not ready
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 8
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 15
code....
View 14 Replies
View Related
Jul 26, 2014
I download the lastest stable netinst, debian-7.6.0-ia64-netinst.iso.
And then proceed to follow these instructions.
4.3.1. Preparing a USB stick using a hybrid CD or DVD image
Code:
Select all# cp debian-7.6.0-ia64-netinst.iso /dev/sdb
# sync
Unfortunately, the USB will not boot.
The instructions I am following tell of creating "a second, FAT partition on the stick, mount the partition and copy or unpack the firmware onto it".
# mount /dev/sdX2 /mnt
# cd /mnt
# tar zxvf /path/to/firmware.tar.gz
# cd /
# umount /mnt
View 6 Replies
View Related
Aug 9, 2010
I noticed today I downloaded the amd64 netinst ISO for 'testing' and during the installation, it warned me of a the fact that I was installing using the 2.6.30.x kernel and I am now attempting to install a 2.6.32.x kernel. Is this is a common warning because I have never seen it before. I got it with both the netist & the businesscard image. Has anyone seen this before and is this a problem? Just trying to understand whats going on under the hood. I don't have the error in front of me since I am on my phone away from the office.
View 5 Replies
View Related
Jun 12, 2012
Last week I installed the Debian 6.0.4 XFCE on to a system from an iso I burned to DVD. I had no problems.
Today I downloaded the 6.0.5 netinst iso and burned a CD to install on a system which has only a CD reader, not DVD. The install goes fine until I select a download mirror. No matter what mirror I select, I get "Bad Archive Mirror".
When I check the log in virtual console 4, the following message appears: "WARNING**: mirror does not support the specified release (squeeze)"...
View 14 Replies
View Related
Feb 26, 2010
I haven't used Debian in 1 year or so and would like to know if there is any possible way to do a fresh installation of Debian Lenny or Squeeze (either or) and not install Exim? I get to the package selection section of the Debian Installer and I de-select "Desktop Environment" & "Standard System" so nothing is selected and it still be default installs Exim. Is there a way to omit this from the install?
View 9 Replies
View Related
Jul 30, 2014
Fresh install without a desktop environment, I only selected "standard software utilities" from the software selection step of the installation process, nothing else is installed thereafter.
I cannot follow these instructions [URL] .... because "auto" and "iface" commands not found.
iptables isn't installed, but I want to install nftables since it's what iproute2 is to net-tools.
And it doesn't even have NetworkManager either and so far I found out ifconfig (net-tools) has been dropped in favor of iproute2, although that is just what Wikipedia says.
[URL] ....
"apt-cache search iproute2" revealed there is only iproute.
I just checked, net-tools is also installed, but ifconfig command not found?
View 4 Replies
View Related
Aug 28, 2014
Using the mini.iso netinst image, when installing the the base system I get the following error:
Debootstrap error, the following error occurred: bzcat is not available on the system. Check vt4 for details, etc, etc.
Usually I have no issue at all installing a barebones sid system, but over the last week I've had the same error over and over.
The issue appears to of been resolved. I guess something server side was tweaked.
View 0 Replies
View Related
Jul 6, 2010
does someone know a workaround to solve this problem?[URL].. I'm trying to download all firmware on [URL]..I put them on usb key (they are about 12 files .deb) and, during the installation I choose "select driver from alternative" (or something like that) but never recognize it.Seems this card works with tg3 driver but i'm not sure.If there are no way to recognize it from installer, could someone please suggest me an alternative way to install testing on my notebook ?
View 6 Replies
View Related
Jun 2, 2010
I am trying to install debian from a netinst cd. Everything seems to go fine except when the installer needs to connect to a mirror. It doesn't throw up an error, it just hangs a bit and then seems to keep going a lot quicker than i would expect. For example, when installing additional software, it gets stuck downloading the first few files for about 5 mins and then skips ahead and finishes the entire process in about 5 mins.
What I end up with is a very bare bones system when I fist boot into it, without any of the stuff that I had indicated that I wanted to install (ie desktop environment, web server, etc). The Internet connection works and I am able to ping websites including a number of the mirrors I tried during the install. However when using apt-get it just gets stuck trying to connect to the mirror and doesn't go any further.
View 4 Replies
View Related
Jun 13, 2011
I was install my server (IBM x360) debian squeeze with netinst-CD but screen's cracked like static. (graphical or none both)
View 1 Replies
View Related
Feb 8, 2015
I have been happily running Wheezy on the Chromebook Pixel with little or not issues. Recently I needed to re-install and decided to try Jessie. Again I was following the excellent instructions at [URL] .... except with the Jessie image.
However everytime I went to install it (after adding in the mem=4G line) it just rebooted and brought me back to the same install screen again. I just downloaded the Wheezy image again and it is installing now perfectly.
View 1 Replies
View Related
Oct 20, 2010
i have it working in my computer but its just a text base.. how can i install a graphical interface for this please?
View 4 Replies
View Related
May 28, 2010
I installed lilo and it boots. How do I installed grub again. Do I just use synaptic manager to uninstall lilo and install grub?
[code]....
I know grub2 does not work, giving me error: ntoskrnl.exe missing or corrupt. I did install grub-legacy and it worked, but I had to re-install squeeze due to other problems. So, now I want to replace lilo with grub legacy.
View 4 Replies
View Related
Nov 14, 2015
I was planning on installing Stretch on my iBook G4. So I got my netinst cd and went through the install process. Everything was fine till I got to the section where I selected my mirrors. I chose the US/ftp.debian.org mirror and it failed so I tried the ftp.kernel.org and that failed as well. Then I tried the third on the list and I was able to connect and get my packages. The install completed, however when I rebooted the bootup froze. So I thought that it could my cd so I went and grabbed the latest stretch iso from the site.
Yet again I ran into issues. The biggest was that I kept getting sent back to install menu to manually select what steps I wanted to do. I found this odd since normally the install will just walk you through. Then I ran into the same issues with mirrors. finally the install completed and I was rebooted. However the boot failed again, but this I got dropped into the initramfs shell. Should I file this as bug with the debain-installer package?
View 8 Replies
View Related
Jun 3, 2010
This is my first ever time trying out a Linux based system and I would like to ask a quick question. When you plug in your cd/flash drive it comes up with the option to try Ubuntu before installing it on your hard drive. When I go to try I can't connect to my home network. Is this because it is in the try mode? Or something else?
View 4 Replies
View Related
Jul 1, 2010
i've put together a slackware box that acts as a "virtual web" to answer pings from devices that ping various pages (such as www.yahoo.com) to test their connectivity. this is for bench testing the devices to verify such complaints as "cannot connect to the internet" or "fails connectivity test". so far, so good, except for a few devices that seem to be also try to load a particular page wirh an embedded browser. this i need help with. currently, all that's needed to return a ping is to look at the DNS requests the device makes and add the requested web address (www.yahoo.com for instance) to the hosts file. what i need is a redirect to a particular html file based on the address requested (i.e. yahoopage.html for www.yahoo.com, lgepage.html for www.lge.com, etc) any deas on how to accomplish this?
View 4 Replies
View Related
Feb 28, 2009
I am a ubuntu user but I want to go to the next level to use debian because what I heard of it, but I get confused to what to install on my computer do I install debian testing or debain stable with testing repositories.
- I want to use this system to the home use only.
- I want to use the newest packages because the stable packages is too old to use.
- What about using more than one repository i.e stable with testing with unstable at the same time (the same sourcelist)
- Is the testing and unstable sid packages good enough for the home use?
View 5 Replies
View Related
Jul 13, 2011
I am in the process of writing a socket program that will need to talk to different computers across the world. I want to set up a virtualized WAN on my computer so i can install the software on a virtual machine, and test it's connectivity in a "real"ish WAN environment.
[URL] Looks promising for setting up the WAN, but i was curious if anybody knew a better way to do it than setting up a bunch of virtual servers, and then another virtual server running WANEM to act as the WAN. I have never been very successful with Virtual Nic's
View 1 Replies
View Related
May 19, 2011
Now doing some research about performance of Linux switch. I'll start with basic structure of my system: PC1 is connected to PC2 - both have 1 NIC so not much to add.PC2 eth0 is divided in VLAN`s as far as maximum of 4094. Every VLAN has it's own switch (bridge). On PC1 when I run a test I just make VLAN/configure IP address and stream data to IP that's configured for that bridge on PC2.But now I want to add one more interface to each bridge, so I could stream from PC1 through bridge to Virtual interface (just an endpoint out of bridge). I could possibly add one more computer, physical interface to PC1 and make it work, but is there any way to make this work with virtual interfaces, like tun or something? Making just a simple tun interface and adding it to bridge, as you understand, doesn't do the trick, I need some kind of other endpoint that /virtually/ connects to tun interface. Maybe someone has made some kind of script or something? Using Iperf for my tests.
View 2 Replies
View Related
Sep 9, 2010
The installer recognizes my wifi device but in order to connect to wifi I have to be able to use iwconfig to tell it that it has to connect to channel 11. If I don't do that it doesn't connect. The amd64 installer lists wireless tools in the list of extra tools to load, but for some reason the 32 bit installer doesn't. However wireless_tools...udeb is on the disk. What command would I use to load it manually from a console?
View 3 Replies
View Related
Apr 22, 2015
I am currently running Linux Mint Debian Edition (1 not the newly released 2). I am going to jump back to Debian testing shortly, and I'd love to avoid a fresh install. Whether I should upgrade to Stable before Testing, or just point the repos to testing and jump. Will it make any difference? If I hit a snag, I'll do the clean install.
View 4 Replies
View Related
Jan 22, 2010
Now that I've [url="http://forums.debian.net/viewtopic.php?f=10&t=48745"]destroyed[/url] the installation on my notebook, and a fresh install of Lenny with upgrade to Squeeze (to try out smxi) didn't work, I wanted to install Squeeze fresh.But not from a CD. That's too tired, and I've never actually installed from a USB stick.So I set out to do this, for it doesn't seem hard at all:
http://d-i.alioth.debian.org/manual/en. ... 04s03.html
I even get to use cool-sounding commands like zcat, so this is way hipper than burning CDs, of which I have far too many lying around. Now here's the thing, it boots up and gets started, but the versions of don't match. I got both of them from the [url="http://www.debian.org/devel/debian-installer/"]Debian-Installer page[/url] from netinst , both amd64, specifically: http://d-i.debian.org/daily-images/amd6 ... oot.img.gz (30 MB, don't click)
and http://cdimage.debian.org/cdimage/daily ... etinst.iso (139 MB, don't click)
How on man's green web,then,do I make sure that I match up the correct versions of the netinstall image and the installer files?hangs head and slooowly reaches for CD spindle...
View 4 Replies
View Related
Jun 14, 2010
I have 2 debian testing cds 1. the first one I have downloaded at some months ago and the second one I have downloaded today. With the first cd I can install debian with out problem but not with the second. when I go to format it tells me that it was unable to format the disk. I try to format it with ext4 with journal, I also try with ext3 but I take the same message. What I must do to be able to install the debian with the lastet testing cd?
View 7 Replies
View Related
Feb 16, 2011
I'm wondering about this because I'm considering doing this myself. Specifically, I'd like to know if your wireless configurations survived the upgrade or not. Meaning, where they removed, altered, or hopefully, where they preserved as they where?
Also if anyone knows of a good link regarding this particular upgrade, by all means please share. I have only been able to dig up a bit of dirt on the topic but they were concerning older Debian releases. Maybe theres not much difference?
View 5 Replies
View Related
Jul 11, 2011
What is the best way to install Firefox 5 (with flash) in Debian Testing ? I'm asking this because, until now, I've used Mint Debian, and now when I switched to Debian, there isn't a firefox 5 package in debian repositories, and I'm used to installing software through Synaptic only
View 8 Replies
View Related
