Debian :: Easiest Way To Make A Bootable Pendrive Of Stable I386 Netinst?
Jan 4, 2010
Which is bit tricky (I learn slowly linux unfortunately due to low skills in informatics)
The cdrom debian installer to be put is located here,
http://cdimage.debian.org/debian-cd/...86-netinst.iso
I tried unetbootin to make this pendrive, and it seems to be working, but not perfect. it hangs after the territory, saying that nothing into /cdrom is mounted.
Without unetbootin, how should we do to make a pendrive iso-cd/debian-503-i386-netinst-like bootable?
View 4 Replies
ADVERTISEMENT
May 4, 2011
how to make bootable pendrive
View 5 Replies
View Related
Jul 26, 2014
I download the lastest stable netinst, debian-7.6.0-ia64-netinst.iso.
And then proceed to follow these instructions.
4.3.1. Preparing a USB stick using a hybrid CD or DVD image
Code:
Select all# cp debian-7.6.0-ia64-netinst.iso /dev/sdb
# sync
Unfortunately, the USB will not boot.
The instructions I am following tell of creating "a second, FAT partition on the stick, mount the partition and copy or unpack the firmware onto it".
# mount /dev/sdX2 /mnt
# cd /mnt
# tar zxvf /path/to/firmware.tar.gz
# cd /
# umount /mnt
View 6 Replies
View Related
Sep 1, 2009
Nothing is working,[URL] My bootable pendrive is not seen by grub. The tab in grub, e, gives my 3 partitions only
[URL]
View 2 Replies
View Related
Aug 16, 2010
I have a Redhat Enterprise Linux system and I want to re-make it as Debian. I downloaded the Debian netinst iso but can't seem to make a bootable CD out of it, and I haven't found any adequate explanations anywhere.
I tried burning the iso directly to a disk. i set up the boot order in my BIOS but when I restart the machine it spins the CD drive a few times and then moves on to the hard drive.
I tried expanding the iso into a directory, and then copying all those files into into the "Blank CD-R Disc" on my Gnome Desktop, burnt the CD, and still no boot.
I found some instructions using X3b, but X3b was giving me errors.
View 8 Replies
View Related
Sep 2, 2009
I created a bootable usb pendrive with ubuntu netbook remix, and now want to download it to an ISO image to be able to use the pendrive for other purposes, but having possibility to create it again from ISO. What is the right application to do it?
View 2 Replies
View Related
May 13, 2011
I have installed Ubuntu 10.10. Works good, but I would like to switch LTS-release-cycle. I can't burn CD, so I'm trying to install Ubuntu 10.04 without cd or pendrive. I tried to install Ubuntu 10.04, using Ubuntu alternate cd and grub loader: [url] but it doesn't work (bugs in kernel modules) Is it possible to downgrade Ubuntu 10.10 to 10.04 without burning cd? Can i create new partition and house the installation disk?
View 1 Replies
View Related
Feb 21, 2011
I have download Debian 6 Live from here. Now I am trying to boot it from USB. How I make a USB pen drive bootable from this iso file.
View 14 Replies
View Related
Feb 1, 2011
I've done an image according to:
[URL]
then I've copied it using:
Code:
# fdisk -l
Disk /dev/hda: 81.9 GB, 81964302336 bytes
255 heads, 63 sectors/track, 9964 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x1145fa35
[code]....
View 2 Replies
View Related
Aug 9, 2010
I noticed that when using the "daily built images" from Squeeze via Netinst, during the disk partitioner, I am un-able to make the /boot partition bootable.or some reason I can't enable the 'boot' flag on several different ISO attempts and differenthardware vendors. The only thing I can see is that this is an issue with the netinst ISO image from the daily built images. Has anyone seen this or is this a known issue / bug? I don't want to file a bug report if possible but I searched and couldn't find anything on this. I doubt I am the only one who's experienced this so far.
View 11 Replies
View Related
Aug 10, 2010
Running Squeeze here. I added a new SSD to my system. Root is /dev/sda3 and I want to clone that system to the new SSD on /dev/sdb1 and make it bootable. I tried:
mount /dev/sdb1 /mnt/ssd_root
cp -dpRx / /mnt/ssd_root
then
update-grub
or
grub-install --recheck --root-directory=/mnt/ssd_root /dev/sdb
but to no avail. I cannot get the new system to be bootable and available through Grub. Part of the problem is that I do not know my way around Grub v2 so well, I could probably manage quite well with legacy grub. So, whats the easiest way to clone a system and make it bootable on another partition? Should I be using debootstrap, and importing/exporting the package list to install the same packages on the new system as the old? or is using cp -dpRx to copy the old ok? How do I make the new system boot?
View 9 Replies
View Related
Jan 8, 2011
I'm looking for a good tutorial to install minimal Debian with Gnome on USB Memory stick and make it bootable.
View 9 Replies
View Related
Mar 13, 2011
So here is my situation..i was using win 7 and ubuntu 10.10 in my dell studio 1555. and i wanted to try out debian so i installed debian in my pendrive. so the grub was modified. when the computer starts it shows debian,ubuntu and win7 no problem.. but if i remove the pendrive, nothing comes up. it shows grub rescue>..
so now i cant start up unless i plug in the pendrive. what to do now to solve this problem?? i want to restore my grub to the previos state.
View 2 Replies
View Related
Jan 10, 2011
I got myself a dell laptop from the local computer store. Its a used machine with Windows Vista Home Basic on it. I want to load Ubuntu Desktop 10.10 though so I can do perl development. BUT I want to keep a copy of the entire harddrive with the dell utility partition and Windows Vista in case I want to go back. I was thinking I could image the drive but I not sure what to use, I don't have Ghost or anything, Someone had told me about Clonezilla. Would that work for me? Is it hard to use? Also I want to burn the data to a DVD or something more storable than a harddisk.
View 8 Replies
View Related
Oct 1, 2010
I've been trying out a distribution based on Debian Squeeze, but what I'd really like to try is a minimal Debian distribution I can build from the ground up and customize as needed. I heard a lot of positive things about using netinst on machines that are usually hard to get regular installation disks to work on. Downloaded netinst for i386 this week from a link at [URL].. and attempted to install from scratch on my machine. I got past formatting my disk and was at the base install step. It keeps complaining about corrupt programs it can't install. I ran a check of the CD disk from the menu and it says there are no issues with the disk itself. I can see some basic directories and cdebootstrap installed on my hard disk. Would like to jump to installing kernel and grub or something and attempt to download some of the other programs later, but it won't let me bypass the step. Saw some articles about a Debian from Scratch project on the Internet, but doesn't look like it's active any more. What's the best way to get a minimal Debian distribution based on Squeeze installed to a hard drive? Should I just wait until the official release?
View 6 Replies
View Related
Sep 9, 2010
The installer recognizes my wifi device but in order to connect to wifi I have to be able to use iwconfig to tell it that it has to connect to channel 11. If I don't do that it doesn't connect. The amd64 installer lists wireless tools in the list of extra tools to load, but for some reason the 32 bit installer doesn't. However wireless_tools...udeb is on the disk. What command would I use to load it manually from a console?
View 3 Replies
View Related
Aug 9, 2010
I noticed today I downloaded the amd64 netinst ISO for 'testing' and during the installation, it warned me of a the fact that I was installing using the 2.6.30.x kernel and I am now attempting to install a 2.6.32.x kernel. Is this is a common warning because I have never seen it before. I got it with both the netist & the businesscard image. Has anyone seen this before and is this a problem? Just trying to understand whats going on under the hood. I don't have the error in front of me since I am on my phone away from the office.
View 5 Replies
View Related
Jun 12, 2012
Last week I installed the Debian 6.0.4 XFCE on to a system from an iso I burned to DVD. I had no problems.
Today I downloaded the 6.0.5 netinst iso and burned a CD to install on a system which has only a CD reader, not DVD. The install goes fine until I select a download mirror. No matter what mirror I select, I get "Bad Archive Mirror".
When I check the log in virtual console 4, the following message appears: "WARNING**: mirror does not support the specified release (squeeze)"...
View 14 Replies
View Related
Apr 16, 2010
Recently, I did a netinst Debian install (on a C554US compaq presario), and while the net worked fine during install, I didn't seem to have a network connection (I use dhcp, mind you) or even an eth0 set up. I've used Debian before, but it was awhile back and I can't remember it all that well, but I DO remember having had net back then (previous version). I'm using Debian Testing, if that helps explain what might be wrong, and I can't help but feel it is my own mistake which caused it.
View 4 Replies
View Related
May 11, 2010
How can i copy my G4L bootable CD into a partition, so thar i can boot from it, and not use the CD anymore?The idea is based in the fact that i am so lazy ... that opening/closing the CD is getting on my nerves
View 5 Replies
View Related
Jun 18, 2010
I installed debian testing from hard disk using the netinst.iso. Now how can i get the rescue mode to reinstall grub? During installation i didn't get other options like rescue mode.It guided me to install debian testing from hard disk only.
View 2 Replies
View Related
Jul 30, 2014
Fresh install without a desktop environment, I only selected "standard software utilities" from the software selection step of the installation process, nothing else is installed thereafter.
I cannot follow these instructions [URL] .... because "auto" and "iface" commands not found.
iptables isn't installed, but I want to install nftables since it's what iproute2 is to net-tools.
And it doesn't even have NetworkManager either and so far I found out ifconfig (net-tools) has been dropped in favor of iproute2, although that is just what Wikipedia says.
[URL] ....
"apt-cache search iproute2" revealed there is only iproute.
I just checked, net-tools is also installed, but ifconfig command not found?
View 4 Replies
View Related
Aug 28, 2014
Using the mini.iso netinst image, when installing the the base system I get the following error:
Debootstrap error, the following error occurred: bzcat is not available on the system. Check vt4 for details, etc, etc.
Usually I have no issue at all installing a barebones sid system, but over the last week I've had the same error over and over.
The issue appears to of been resolved. I guess something server side was tweaked.
View 0 Replies
View Related
Jul 6, 2010
does someone know a workaround to solve this problem?[URL].. I'm trying to download all firmware on [URL]..I put them on usb key (they are about 12 files .deb) and, during the installation I choose "select driver from alternative" (or something like that) but never recognize it.Seems this card works with tg3 driver but i'm not sure.If there are no way to recognize it from installer, could someone please suggest me an alternative way to install testing on my notebook ?
View 6 Replies
View Related
May 18, 2011
Unity always crashing on me... how to make it a bit more stable, or at least customizable?
View 2 Replies
View Related
Jul 11, 2015
I'm using the debian testing netinst image (from below url) and trying to install on virtualbox (part of a debian testing vagrant base box build pipeline I've got). This hasn't worked properly for last couple of weeks. Host system is also debian testing.URL....
if I accept all the defaults through the installer (apart from small details like timezone), I end up with a system in which the network does not work. It seems that /etc/network/interfaces has eth0 but the actual network card is called enp0s3, so no network comes up at first boot (despite that the network works fine during the actual install). I can easily fix it after the first boot by editing /etc/network/interfaces and replacing eth0 by enp0s3 and then doing an ifup. This is fine for a workaround but begs the question of why does it fail in the first place.
I have googled a bit and found this thread: [URL] .... which describes a similar issue, and there are other threads out there describing the change.
The udev change seems reasonable enough, but also some package involved in basic debian netinst installation has a bug given that the default install path results in a broken system. Question is, is there a bug already reported (I couldn't find it), or else, which package should I report the issue against? End result should be basic install does not require editing after boot to fix the network.
View 11 Replies
View Related
Jun 2, 2010
I am trying to install debian from a netinst cd. Everything seems to go fine except when the installer needs to connect to a mirror. It doesn't throw up an error, it just hangs a bit and then seems to keep going a lot quicker than i would expect. For example, when installing additional software, it gets stuck downloading the first few files for about 5 mins and then skips ahead and finishes the entire process in about 5 mins.
What I end up with is a very bare bones system when I fist boot into it, without any of the stuff that I had indicated that I wanted to install (ie desktop environment, web server, etc). The Internet connection works and I am able to ping websites including a number of the mirrors I tried during the install. However when using apt-get it just gets stuck trying to connect to the mirror and doesn't go any further.
View 4 Replies
View Related
Sep 17, 2010
I am trying to build a test VM with VirtualBox 3.2.8, hosted on Ubuntu 10.04 amd64. I am trying to install Debian Squeeze from the daily build (specifically, from the following URL):
[URL]
(I've also tried the netinst ISO in the same directory.) The sha1sums are correct for each image.
When I start the VM, it refuses to boot, giving me the message "FATAL: No bootable medium found! System halted."
I would like to note that I've used VirtualBox for several years now, and GNU/Linux since 1995. So I have some experience in the field. (Of course experience is not much guard against brown-bag mistakes.) I've tried this same VM with an Ubuntu ISO (simply switching the attached ISO in the config), and it boots and installs OK.
Is there a known problem with the daily builds vs. VirtualBox?
View 12 Replies
View Related
Jun 13, 2011
I was install my server (IBM x360) debian squeeze with netinst-CD but screen's cracked like static. (graphical or none both)
View 1 Replies
View Related
Jan 27, 2016
I've just installed debian testing on my computer (netinst AKA basic shell version). Now, how do I do a minimal gnome install? Minimal means, I don't need libreoffice or any extra bloat. However, I do want nautilus, gnome-settings-daemon and networkmanager (and of course, firefox!).
Also, is audio included or not in gnome-shell?
If I just install the gnome-shell package (with --no-install-recommends package), will it pull in gdm, Xorg, etc. or do I have to install them separately? Also, need to confirm whether my sources.list is properly set or not:
Code: Select alldeb http://ftp.security.debian.org/debian/ stretch main non-free contrib
deb http://security.debian.org/debian-security stretch/updates main
View 4 Replies
View Related