I downloaded Fedora-12-x86_64-netinst.iso, burned a CD and booted it to upgrade my Fedora 11 system. It seemed to be working at first, but after it made a network connection and spun for a while, it displayed an error message which I scrawled down with a pen that looked something like this:
[Code].....
I am trying to build a test VM with VirtualBox 3.2.8, hosted on Ubuntu 10.04 amd64. I am trying to install Debian Squeeze from the daily build (specifically, from the following URL):
[URL]
(I've also tried the netinst ISO in the same directory.) The sha1sums are correct for each image.
When I start the VM, it refuses to boot, giving me the message "FATAL: No bootable medium found! System halted."
I would like to note that I've used VirtualBox for several years now, and GNU/Linux since 1995. So I have some experience in the field. (Of course experience is not much guard against brown-bag mistakes.) I've tried this same VM with an Ubuntu ISO (simply switching the attached ISO in the config), and it boots and installs OK.
Is there a known problem with the daily builds vs. VirtualBox?
Pre update (10.10) Synaptic Package Manager would allow me to delete residual config files by clicking the Apply button after marking them. Post update, the Apply button does not highlight or allow me to click it when I mark packages for complete removal.
View 9 Replies View RelatedI just was wondering how can I install Fedora, using the netinst.iso? I cant seem to find some documentation on the subject. Must be overlooking something.
View 4 Replies View Relatedto access my floppy from Fedora 11. It is mounted automatically,but when i try to open it by double-clicking, I just get "already mounted" message.I need to retrieve my old menu.lst which is on the floppy. It will then need to be edited to include Fedora.
View 1 Replies View RelatedI'm using Fedora 13 and I'm trying to update Gnome Shell on it. I use this command:
Code:
yum install gnome-shell --releasever=14 --disablerepo=rpmfusion*
but I get:
Code:
Loading mirror speeds from cached hostfile
fedora/metalink | 13 kB 00:00
updates/metalink | 17 kB 00:00
[code]....
how can I update gnome-shell package using yum?
I have installed Package: gnumeric (1.12.18-2) in my Jessie/Mate system. It is very jittery on scrolling, and I was wondering if I should upgrade to the version (1.12.26-1) in stretch(testing), as there seem to have been a large number of bugfixes.
I have tried the following simulation command, but it gives the error message shown:
Code: Select all~# apt-get --simulate -t stretch install gnumeric
Reading package lists... Done
E: The value 'stretch' is invalid for APT::Default-Release as such a release is not available in the sources
The documentation suggests that I may need to create an apt preferences file. I do not have any of the following files mentioned by the apt-get man page:
/etc/apt/preferences/etc/apt/preferences.d/etc/apt/apt.conf
What I would like to do is upgrade just the specific package jessie/gnumeric(1.12.18-2) to stretch/gnumeric(1.12.26-1). I do not want any other packages to be inadvertently upgraded to stretch. I have seen warnings that one can easily end up with a badly mixed system and I wish to avoid that! I also do not want to disturb the standard apt-get update, which I am running daily via anacron at present.
I am following this guide to installing eclipse via terminal command-line on Linux. However, this seems to be happening lately with all the packages I try to install..I checked the Synaptic Package Manager and reloaded and rebooted the computer, but to no avail.
View 5 Replies View Relatedi am trying to get fc12 up and running. have spent a lot of time reading posts about similar problems, but so far haven't found the right answer. this is what i get when i try to run yum update:
[root@Tex etc]# yum clean all
Loaded plugins: presto, refresh-packagekit
Cleaning up Everything
[root@Tex etc]# yum update
Loaded plugins: presto, refresh-packagekit
adobe-linux-i386
[Code]...
When I update my system by KpackageKit I have the ability to read what was fixed by that package update by clicking on package's name. How to read this info in command line by yum?
View 4 Replies View RelatedI cant get yum to work
every time I go to install something it gives this output code...
I just installed Fedora 12.
I am getting following error if I try to give the command yum update
Quote...
I tried all the steps in the post http://rishabhsays.wordpress.com/201...sitory-fedora/ and no success. I am behind a proxy server and got proxy related info in yum.conf file but still facing the same problem.
I even tried following commands with no success
Quote...
I can connect to Internet but cannot update using yum
There seems to be a bug reported on the same issue in FEDORA13 - https://bugzilla.redhat.com/show_bug.cgi?id=564509
I got this error message when installing Fedora 11 by an installlation DVD (download from [URL]) Unable to read group information from repositories. This is a problem with the generation of your install tree. This error message appeared after the step that the installer asked me to choose where to install boot loader and configure the GRUB boot menu. The error message came with two button: [Retry] and [Exit installer].
View 8 Replies View RelatedI know that there have been a lot of messages (with repo correction info posted) for yum updates after install; but I'm trying to do an internet install of F11 and I'm getting the same message. Obviously I can't change a yum.conf file for this -- but it does give one the option to edit the location.
The default location is: [URL].. There's one other big flaw with the internet install -- it writes HD partition changes to the disk right after you set up the partition scheme; shouldn't it wait until it knows it can connect to the repository?? I had to boot to a Ubuntu live dvd to get on here to post this. I'm definitely not saving time using the internet install option.
I got online last night and found some of the info. on the yum updates issue, with different mirrors or repositores. So what I tried changing for the default repo / metadata location, using the edit option is:
I changed the word metalink to mirrorlist. I changed https to http. I tried using http://mirror.liberty.edu/pub (etc) which is actually an rpm fusion mirror. I likewise tried http://mirrors.cat.pdx.edu (etc.) I gave up and went to bed, and this morning I just tried the http://download.fedora.redhat.com/pub/fedora/linux/releases/$releasever/Everything/$basearch/os/ (and I also tried the above redhat.com address substituting i386 for basearch and 11 for $releasever) -- no go with any of that. Same error message about cannot retrieve installer metadata.
All of the other messages I've seen on this issue have been about Yum updates; not installs. Hopefully the install DVD will show up in the next couple of hours; but I'd like to make this work if I can ??
I am trying to dual boot Vista and F10 and I have 2 different 400GB hard drives to do it on. On the first HD, I have Vista installed but when I try to install F10 on the second, I get this error message:
Quote: Error: Unable to read group information from repositories. this is a problem with the generation of your install tree. I've looked it up and found some forums but none answer how to "fix" it (if it is indeed something that you fix).
I'm doing a Kickstart install of Fedora 11 with a DVD ISO as the installation source and the ks.cfg file in the root folder of the DVD. The error message I get is: "Unable to read group information from repositories. This is a problem with the generation of your install tree."
View 3 Replies View RelatedI've just upgraded my server installation from 9.04 to 9.10. I'm running this as a Xen virtual machine. All seemed to go well until I restarted, at which point I got stuck at this point:
Begin: Running /scripts/init-bottom ...
Done.
mountall:/proc: unable to mount: Device or resource busy
mountall:/proc/self/mountinfo: No such file or directory
[code]...
My service provider is running xen-shell 1.0.79 running on Xen version 3.0.3-1, and after the seemingly-successful do-release-upgrade, uname -r reports ubuntu kernal 2.6.18-5-xen-amd64. Unfortunately, this isn't mentioned as a possible problem here [URL]
I am new to Ubuntu. I recently upgraded my Ubuntu from 9.10 to 10.4 (64bit) since then I am unable to dual boot to WIN2K3 from the same HDD as my Ubuntu. I have ran some of the suggestions like: Sudo update grub and Testdisk both did not provide any errors on my partitions and my primary partition displayed in Testdisk was WIN2K3, now when I reboot and select it from the boot menu it just simply show a blinking cursor.
I am out of ideas and I need a solution to suit my configuration. I prefer not to re-install or repair any WIN2K3 OS. Can someone assist and let me know what you need from me to further understand my issue.
After upgrading to 10.10, I have been unable to use the software center to install. Every time I click 'install', the install progress bar just hangs, reading 'Waiting for apt-get to exit'. The same thing happens when attempting to install upgrades via Update Manager.
I can however update via Synaptic and using 'apt-get upgrade' in the terminal.
I was upgrading from 10.04 to 10.10 but my laptop battery went down so the installation did not ended up correctly.
When trying to reboot now, the system is not able to start correctly. No desktop, no icons... nothing.
Starting in recovery mode is impossible too.
Now I am running with live cd.
I haven't used Debian in 1 year or so and would like to know if there is any possible way to do a fresh installation of Debian Lenny or Squeeze (either or) and not install Exim? I get to the package selection section of the Debian Installer and I de-select "Desktop Environment" & "Standard System" so nothing is selected and it still be default installs Exim. Is there a way to omit this from the install?
View 9 Replies View RelatedI upgraded from grub to grub2 recently, and during an update of my system, it ran the update-grub command which prompted a window asking me where to install Grub. Since I didn't know what partition to install it to and the help suggested to install it to all if I was unsure what partition to install it to - I accidentally installed Grub to my Windows partitions (both the regular and the recovery console).
So now, I can't boot into Windows - the computer just hangs after Grub with a blinking cursor and I have to perform a hard reset. Is there any way for me to restore the boot record for the windows partition without having to reinstall windows from the ground up?! I can't use Linux for my webbanking and other important tasks, so (unfortunately) I need Windows back desperately!
I download the lastest stable netinst, debian-7.6.0-ia64-netinst.iso.
And then proceed to follow these instructions.
4.3.1. Preparing a USB stick using a hybrid CD or DVD image
Code:
Select all# cp debian-7.6.0-ia64-netinst.iso /dev/sdb
# sync
Unfortunately, the USB will not boot.
The instructions I am following tell of creating "a second, FAT partition on the stick, mount the partition and copy or unpack the firmware onto it".
# mount /dev/sdX2 /mnt
# cd /mnt
# tar zxvf /path/to/firmware.tar.gz
# cd /
# umount /mnt
I have an installation problem that I cannot resolve. The problem arises during the installation process, using the Fedora-10-i386-netinst.iso image, burnt onto CD.Immediately after setting up the network card, I am given the error "Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again". Since the installation process is text-based, I do not have the option to edit the repository list, and consequently, have to abort.This is the spec of my machine:
Pentium 166 (yes, it's very old, but it should work, no?)
132MB RAM (just about enough ram for minimilistic server)
80GB hard disk
[code]....
I noticed today I downloaded the amd64 netinst ISO for 'testing' and during the installation, it warned me of a the fact that I was installing using the 2.6.30.x kernel and I am now attempting to install a 2.6.32.x kernel. Is this is a common warning because I have never seen it before. I got it with both the netist & the businesscard image. Has anyone seen this before and is this a problem? Just trying to understand whats going on under the hood. I don't have the error in front of me since I am on my phone away from the office.
View 5 Replies View RelatedI have a Redhat Enterprise Linux system and I want to re-make it as Debian. I downloaded the Debian netinst iso but can't seem to make a bootable CD out of it, and I haven't found any adequate explanations anywhere.
I tried burning the iso directly to a disk. i set up the boot order in my BIOS but when I restart the machine it spins the CD drive a few times and then moves on to the hard drive.
I tried expanding the iso into a directory, and then copying all those files into into the "Blank CD-R Disc" on my Gnome Desktop, burnt the CD, and still no boot.
I found some instructions using X3b, but X3b was giving me errors.
Last week I installed the Debian 6.0.4 XFCE on to a system from an iso I burned to DVD. I had no problems.
Today I downloaded the 6.0.5 netinst iso and burned a CD to install on a system which has only a CD reader, not DVD. The install goes fine until I select a download mirror. No matter what mirror I select, I get "Bad Archive Mirror".
When I check the log in virtual console 4, the following message appears: "WARNING**: mirror does not support the specified release (squeeze)"...
I was running Fedora 13 on my old computer with a nvidia Geforce FX 5200 graphics card using the nvidia-173xx driver from fusion. After upgrading to Fedora 14 (the first day of its release) the X server wasn't working anymore, the screen just froze up after the progress bar. With Alt+F4 I "moved" to text mode and gave the startx command, but I got the fatal error message that there was no usable configuration detected. I deleted the xorg.conf file and afterwards I was able to start X again. I use the nouveau driver now, but it doesn't nearly work as good as the nvidia-173xx driver. I have it installed, but when I try to activate it (by running nvidia-xconfig as root) the X server doesn't work again after restart, and I have to do the same thing all over again.
View 6 Replies View RelatedFresh install without a desktop environment, I only selected "standard software utilities" from the software selection step of the installation process, nothing else is installed thereafter.
I cannot follow these instructions [URL] .... because "auto" and "iface" commands not found.
iptables isn't installed, but I want to install nftables since it's what iproute2 is to net-tools.
And it doesn't even have NetworkManager either and so far I found out ifconfig (net-tools) has been dropped in favor of iproute2, although that is just what Wikipedia says.
[URL] ....
"apt-cache search iproute2" revealed there is only iproute.
I just checked, net-tools is also installed, but ifconfig command not found?
Using the mini.iso netinst image, when installing the the base system I get the following error:
Debootstrap error, the following error occurred: bzcat is not available on the system. Check vt4 for details, etc, etc.
Usually I have no issue at all installing a barebones sid system, but over the last week I've had the same error over and over.
The issue appears to of been resolved. I guess something server side was tweaked.