Software :: Boot Disk To Upgrade A Selection Of Rpm's?
Feb 11, 2010
I have several RHEL 5.0 servers in a secure network. We have identified around 200 rpms from 5.4 that we would like to upgrade. These servers have no connection to the internet, and very limited connection to the corporate network.
The application guys will not approve a full 5.4 upgrade as the app is reliant on certain rpms from 5.0.
So how can I create a boot disk that will install just the selected 200 rpm's. I have been trying to modify (remove rpms) from the downloaded 5.4 dvd, but with no luck. I have also had a look at anaconda, but seem to be going round in circles.
View 4 Replies
ADVERTISEMENT
May 16, 2010
I recently went the upgrade route and something went wrong either with the download or the installation or 10.04 and my hardware are having issues. I am looking for some advice for either fixing what is wrong or getting some additional data backed up to USB before wiping the partition and starting new.
My computer is dual-boot using Grub2, the other OS being Windows Vista. I can get to Windows Vista fine via GRUB. When I select Ubuntu (says kernel 2.6.31-21) though I don't get very far.
At this point I can get 10.04 all the way to the user selection screen, where it immediately freezes, forcing a hard reset. I can boot into recovery mode, but if I select failsafeX it freezes at the first screen that comes up--the notice you are running in low res graphics mode.
When I did the upgrade from 9.10 to 10.04 I used the update tool in Ubuntu. However I also now have a 10.04 install CD.
My graphics cards are twin NVidia 9600s in SLI. I would say it is a graphics card problem since the first graphical screen that comes up both in regular boot (the login screen) and failsafeX (the notice screen) I get a hard lock. However booting off the CD it loads the desktop just fine!
I would just wipe clean however my last data backup was partial and there is some stuff I would like to go back in and get. However neither method I have used to try and go back in to get what I need has succeeded. I have a 320G USB drive I use for backing up certain data. If I boot using the CD, it gives me an error message about the isntaller then goes to desktop (which works fine, even though I can't get past the login screen when booting 10.04 from the hard drive) I can then plug in the USB drive fine and it shows up, but some of the files on the Ubuntu installation don't give me permission to copy them. There is an 'X' on the icon and I don't know whether there is a way to get me authenticated in order to copy them from the CD desktop.
Alternatively, I can get to a root prompt if I boot into recovery mode (not the CD, just recovery mode from GRUB). I assume I can move them from there and that the permissions issue won't be a problem but when I plug in the USB drive I don't get any errors but I am not seeing it show up in /media. Also if I put a DVD-RW (all I have on hand) into my DVD-RW drive maybe I could back the data up to that, but I'm not familiar with how to do that from the command line.
If I could get to a point where I could verify that I have this extra bit of data backed up then I wouldn't have any problem wiping the partition and starting over.
View 1 Replies
View Related
Sep 19, 2010
I'm looking into upgrading my laptop from 9.10 to 10.04, but before I do I wanted to find out if I can limit the number of packages the system must install for this purpose. I began the process to upgrade, and the wizard informed me that on top of package upgrades, 288 packages needed to be downloaded, for a total well over 1GB of downloading. While my internet connection can support this, I don't feel the need to install 288 packages, most of which I'm certain I will not be using, nor will most of these be dependencies for things I do use.
In short: can I pick and choose what gets downloaded and installed in the upgrade? I've asked this question before, and somebody said the answer was 'yes', however I see nowhere to control this. No buttons, no config files.
View 1 Replies
View Related
Jun 18, 2010
How can I change the behavior of the selection buffer or a program that uses it ( I have xclip) to not send me text until the mouse button is released while clicking and dragging? This causes havok in the software I'm developing that tries to make use of the selection buffer. I need the full selection, not bits more bits more bits and then the full selection.EDIT: I cannot listen for mouse events such as button release outside of the GUI of my program.
View 2 Replies
View Related
Mar 4, 2010
I am having dual boot system(windows 7 and Fedora 12).When i switch on my system.It show the the timer 3 sec in order to get boot selection window(means window which asks that what to start fedora 12 or windows 7).I want to increase this time from 3 to 10 sec.
[URL]
View 3 Replies
View Related
Oct 4, 2009
I just upgraded my F9 system to F10 using they preupgrade method, and though nothing seems to have failed during the upgrade I can't boot my system any longer.I have a completly encrypted system, and so I need to enter a passphrase at boot. The new F10 system does boot and I do get a Password: prompt but the passphrase is not accepted.My passphrase doesn't contain any odd characters to prevent problems with keyboard mappings. Just plain letters (upper and lower case) and digits
View 9 Replies
View Related
Jun 11, 2009
I just upgraded via preupgrade-cli (from FC10), rebooted, the upgrade process completed, then the system rebooted and I just see a blinking white cursor now.I was able to boot up from a live cd of FC11, but I'm not sure how I can repair the system.
View 14 Replies
View Related
Feb 23, 2010
I was running Ubuntu 9.04 Desktop on a headless Pentium 4 machine which is our file, mail, web & fax server. The two x 250GB SATA hard disks were in a RAID 1 array with full disk encryption. Ran the 9.10 upgrade via WEBMIN and it failed. I should have known then to copy over everything to a backup disk, but instead I rebooted.
On restart the machine accepted my encryption passphrase but promptly hung with a mountall symbol lookup error - code 127. So I can't start the machine to get at the disks, and using a Live CD is useless as it has no way to open the RAID array to get at the encrypted partitions. Although we have data backed up (as at last night) I'd hoped not to have to rebuild the entire server from scratch. But its looking bad.I have taken one drive out and plugged it into another machine (Hercules), and the partitions show up as /dev/sdb1 /dev/sdb2 /dev/sdb3.
If it weren't for RAID, I could open /dev/sdb2 the main partition) in Disk Utility and enter my encryption passphrase to get access. But RAID adds a layer of obstruction that I have not yet overcome. I used mdadm to scan the above partitions and created the /etc/mdadm.conf file, which I edited to show the 2nd drive as missing (rather than risk corrupting both drives). I activated the RAID array with mdadm, and cat shows:
Code:
root@HERCULES# cat /proc/mdstat
Personalities : [raid1]
md1 : active raid1 sdb3[0]
1815232 blocks [2/1] [U_]
[Code]...
I've been searching the web for hours but have yet to find someone with a solution to this situation. If anyone has a thought on how to access this disk I'd be pleased to hear from you. In the meantime I will start building a new (9.10) machine from scratch, without RAID, 'cos that's probably going to be necessary.
View 1 Replies
View Related
Dec 1, 2010
Everything was going great earlier today when suddenly, my PC on a fresh boot, gave me a message that said something like "Ubuntu is running on low graphics mode ..". It was running a low res, i think it was 640x480, and gave me some repair options like a. Boot in low res mode for just one session b. Trouble shoot this error etc..There were 3 more options but i don't remember what they were.
i chose "boot in low res just for this one session", but it gave me the same error the next boot. Then i tried troubleshooting, which didn't work (restoring to a backup config was no use). Then finally i rebooted and started Ubuntu in Recovery mode, and i did something like "Fix broken packages" because , from the list of options it seemed like the only one which would help at that time.
But now, whenever i choose the Ubuntu option after starting my PC, it just restarts my computer. My other OS is Windows 7 which boots just fine. Hope someone can help me with this . In the meanwhile i'll try making a new MBR or something.
View 2 Replies
View Related
Jan 4, 2011
Im trying to get to the debian install through ubuntu through windows 7. I used wubi to install ubuntu and partition the hard drive for a debian install later. But now that Ive installed ubuntu theres no selection to boot Windows 7 in the grub menu that wubi set up. I never touched the windows partition during install but used C:/ for the install components. how can i add windows to the grub selection?
View 6 Replies
View Related
Sep 11, 2010
I have been trying for a couple days now to install 10.04 on a 250G hard drive that was a USB boot with 9.1. I want the hard drive in the case. The bios has been changed and does see the new drive. Boot selection has been changed to CD Rom. Everything starts out fine until step 4 of the install, Prepare partitions. There is no hard drive available on this step. The HDD is not seen by the disk utility either.
View 6 Replies
View Related
Oct 17, 2010
i install ubuntu though wubi and it worked kind of. It asked me to restart at the end so i did and when it was startaing up it didnt show the option to boot into ubuntu.
View 9 Replies
View Related
Aug 25, 2010
I have the issue of getting the Kubuntu getting booted first if I do not select manually in 7 sec. how to make that auto selection to XP so that, I can leave the computer and let it select Windows.
View 4 Replies
View Related
Jun 20, 2010
I have a Ubuntu - windows 7 dual boot (in two partitions of the same HDD) desktop PC for a few months. I was learning terminal commands and, although I don't think I made such a big mistake, but the fact is that the a very strange thing happenned: "Preferences" and "Administration" from System disappeared as it did also "Applications". After rebooting the same it remained the same. No big deal, I thought, because I haven't yet saved any important work on Ubuntu. So I reinstalled Ubuntu. Done that everything was nice until I booted Windows... Since then I counldn't start windows after GRUB due to:
Status: 0xc000000f
Info: The boot selection failed because a required device is inaccessible."
Windows Live DVD Repair is useless. I've tried CHKDSK utilities, no result. Windows partition in Ubuntu's Disk Utility is OK but I can't access the files (all "broken links"), just can explore a few directories after which I find myself entering the same folder endlessly. I wanted to repair windows boot or at least recover some important files in Documents and I thought I had backup (but turns out that, for some reason that I'm still trying to understand, they aren't...).
View 2 Replies
View Related
Jul 31, 2011
I locked the screen, came back, typed the password, screen remained black, though cursor was visible and moving. Nothing I could do to rejuvenate the screen. Had to switch to tty6, sudo shutdown -r now. Then, on reboot obtained kernel selection, it proceeded to displaying kernel messages, but froze on sdb, after 3 secs. I figured it was the usb, so turned off, removed usb cables to external hard drives, but again it froze saying something about firewire mouse, the mouse is also usb. I tried several times, but no matter what kernel I chose, I couldn't get it to boot. So I loaded puppy live cd, but now it can't access some parts of the disk. I was running utorrent and the folder with partially downloaded files can be accessed but there's nothing there (there was), and some folders can't be accessed at all.
View 2 Replies
View Related
Jan 2, 2010
I just attempted to install ubuntu for the 4th and 5th time and have yet again had a fail. This time it actually completed the installation, which is a first. however upon reboot it takes me directly to Vista - I don't see grub or a o/s selection choice.
View 9 Replies
View Related
Sep 3, 2010
Ubuntu 10.04 I am dual-booting along with Windows. I need to change the order of boot options so that Windows is the automatic selection rather than Ubuntu. I cannot find the file to make the change and not sure what changes I should make when I do find it .
View 2 Replies
View Related
Dec 4, 2010
I'd like to install Fedora 14 64bit as a dual boot on an existing win 7 32bit system. When I boot with the Live CD, after selecting "boot" in the Fedora boot selection menu, I get a grey screen with a white cursor, and the system freezes. I checked the Live CD on my laptop and it worked perfectly.
My System:
MotherboardASUS P5Q DELUXE
CPUIntel Core 2 Duo E6750, 2,66 GHz, Sockel 775
[code]...
View 3 Replies
View Related
Oct 16, 2009
my Fedora 11 system is not starting anylonger. It stops with the message:
Code:
VFS: Can't find ext4 filesystem on dev dm-0
The system told me since a while, that a lot of the sectors of one disk of the (software) RAID compound are failed already. So tried to disconnect each of the disks and start them separately. Unfortunaltly this is not working (for one its is not working at all, the other wents the same far as with both), when I tried to recover the system with the Fedora DVD, it said no distribution found. I am quite new and do not know so much about linux system, so i do not know what further information you could need. Maybe it can be important, that both disks are encryped (the system wents so far, that I can type in the password).
View 2 Replies
View Related
Aug 24, 2009
There is a disk 500 gb, it is broken on /boot and on /root and on /dev/sda1 and /dev/sda2. Whether prompt it is possible to redistribute a disk without loss of data namely it is necessary to make/boot and two equivalent on disk volume.
View 3 Replies
View Related
Nov 3, 2015
I installed Debian on my PC with a Acer Stock motherboard (xc600) with amd64 and after the installation finished it told me to remove my installation media and reboot. After reboot I was returned this message ' ERROR: No boot disk has been detected or the disk has failed.'. I have verified with gparted using mint live OS that I have Debian installed on my system.
I got believes that this may have be caused by a broken grub or I need to configure something I don't know how in BIOS.
I will update the topic later..
My installation media was a USB 2.0 flashdrive with a Debian 8.2 Jessie Installer and 9 different Linux distros. I have installed Debian multiple times before on my laptop and never had this problem so I know how to go through the installation process and set the partitions.
View 3 Replies
View Related
Aug 22, 2010
WinXp sp3 is on disk sdb, then installed Ubuntu 10.04 on sda, can go into diff OS without any problem. I am going to move sda to another machine, when I unplug sda, WinXp can't start to boot on sdb. How to fix it?below is my case output$ sudo fdisk -l
Disk /dev/sda: 160.0 GB
...
Device Boot Start End Blocks Id System
[code].....
View 2 Replies
View Related
Dec 30, 2010
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code:
Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
View 2 Replies
View Related
Oct 11, 2010
I'm very new to linux and running debian 4.0. On boot got an error:
I did a ghost image of drive before I do any more damage and when performing the ghost, ghost stated I need to run fsck. I created the image and noticed that a lot of folders were missing (bin, boot and others).
1. How do I run check disk from an boot disk?
2. Is there something else I should consider?
View 1 Replies
View Related
Jul 7, 2009
I have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies
View Related
Oct 30, 2009
I have two servers to upgrade to 5.4 from 5.3. I have the DVD of 5.4 for both of them. Is there a way I can tell yum to use my DVD instead of the network to do the upgrade?
View 4 Replies
View Related
Sep 1, 2010
I had a a problem booting last night when my laptop battery came loose and caused a crash during boot.It ceased loading a daemon and I turned it off with the power switch, then I received the boot error,then i checked the linuxdrives directory and it was corrupt,I then, out of ignorance, ran wubi from within windows XP and said unistall believing that it would reinstall and fix itself.Thus you can see my green behaviour.I have been searching the threads and have tried many things but have had no success, I will suffer a great loss if I lose that load of Ubuntu as I have allot of work stored there, and in my Thunderbird accounts.
View 8 Replies
View Related
Jun 27, 2011
I meet a problem about "Your boot partition is on a disk using the GPT partitioning Scheme but this machines cannot boot using GPT." in installation. Does GRUB-0.97 on CentOS 5.4 support GPT?
View 4 Replies
View Related
Feb 14, 2010
GNU GRUB 0.97
Ubuntu 8.04.4
2.6.24-26
Added an SSD (dev/sdc) and decided to move some less often changed directories there. Started with /usr and /boot, leaving / on a primary in the first drive, for now. All started ok, and my changed fstab mounted the right ones, and the system works.
However, grub is actually using the original /boot on / on sda1. I cannot see any way to change this. (Which makes it sorta hard to update the kernel
From grub:
Okay, since it has two choices, I tried to tell it which one to use. But, grub> root (hd2,5) does nothing.
Disk /dev/sda:
what I seem to recall, grub doesn't care about the boot flag on the disk. Nor does it care about primary vs. logical (except GNU doc says "makeactive" only works on a primary?).
The GNU doc also indicates that it looks for a directory /boot on the partition, so if you're mounting a partition as /boot, it also needs to contain a /boot directory under it. Tried that, but no change.
Is my problem the logical partition? Does that prevent "grub> root" from changing it? I'm afraid to wipe out the old /boot and find that I can't start up.
View 9 Replies
View Related
Jan 16, 2010
when i try to boot from the disk i burned, the screen show to lines of code, then pauses and never continues with any process.
View 1 Replies
View Related
