I recently upgraded through 'YUM' from Fedora 14 to Fedora 15. The upgrade appeared to be successful until it re booted, ever since then it hangs at
Code:
Started SYSV: Enable monthly update of smolt.
I have downloaded the ISO and burned it to DVD on another system which I used to try to rescue the installation, so far to no avail. My system specs are in my signature below (Laughlin is what I upgraded from).
I have just upgraded my F11 x86_64 system using the DVD ISO.
After rebooting as requested:
1) Cupsd fails to start - it can't find libaudit.so.1 (this doesn't worry me in itself).
2) Boot process proceeds until starting hald. This gets an OK response, but then the process hangs. No further output appears on the console. Pressing [ENTER] just causes a blank line to appear on the console. Pressing CTRL-ALT-DEL causes a reboot, and the same symptoms re-occur.
I'm tempted to boot with the rescue disk, save a few critical data directories, then start afresh with a clean install, but is there anything I can do to salvage the upgrade?
I was running Ubuntu 9.10 on my Toshiba A40 Laptop and decided to take the plunge and upgrade to 10.04. Everything seemed to go well until the Restart. Now it only gets to the Splash Screen (Purple Screen with "Ubuntu" and dots under it) and then there is a flash and the text becomes blocks briefly before going to a blank screen! It seems like it might be a video problem but...
View 1 Replies View RelatedI was really enjoying the speediness of 9.10 on my HP Pavilion ze4900. Once I got the wireless driver loaded correctly, anyway. Tried to do an on-line upgrade to 10.04, but figured I should have had a hard-wired internet connection when I got installation messages that "Could not set up..." the network. But, installation continued without any other apparent issues. As soon as it rebooted at the end, the problem started. It hangs right after the ubuntu logo, with a completely blank screen.
My questions:
1) Can I get this to start booting properly?
2) If not, what would be the best way to retrieve my evolution mail files, so I can do a clean install? If I boot from a CD, will I be able to retrieve those files and maybe put them on a memory stick?
Every time I upgrade to the current beta releases (natty) the boot process hangs mostly because of nvidia desktop graphics problems. Luckily the system is still running and remote login to console prompt works too. Is there really no reliable way to reset the graphics (and the rest) to minimum configuration. I am really tired of having to try all the repair options to get the desktop running again. How can Linux ever become a reliable solution if everything takes hours to fix and not even the boot process stays the same from one version to the next.
View 4 Replies View RelatedIn the last few weeks I upgraded my Ubuntu from 8.04 to 8.10 to 9.04. No problems, everything went well. But yesterday I tried to upgrade from 9.04 to 9.10. Everything seemed to go OK until the upgrade was finished and I had to reboot. After the reboot, no Ubuntu anymore... I get GRUB, but when I continue to boot the latest kernel, I don't see any harddisk activity anymore after about 2 seconds.
Here on the forums I read that one should run the boot_info_script when having boot problems, so I already did. I booted the system with a 8.04 live USB stick. And here is the result of the boot_info_script:
[Code]...
I just used Update Manager to upgrade to 10.4 and all I get is the Ubuntu logo screen with the dots and then the screen goes black and there's no other response. This happened after the upgrade completed installing and I received the message to restart the computer. I have never been able to get it to boot.
I can boot fine by selecting the next older kernal although I do get some messages that I don't understand. It all works so I presume it's OK. The kernal that was installed with the upgrade is 2.6.32-24-generic and I've seen other posts about boot problems with it. The laptop is dual boot with Windows XP and Windows boots normally. I saw a suggestion on another thread about booting into an older kernal and then issuing the sudo update-intramfs -u -k command. I tried it and it didn't help.
Next I tried 2.6.32-24-generic recovery mode and I tried the option to fix damaged packages. It seemed to do something although I saw error messages about not being able to find various software sources. I tried a normal boot afterwards and same problem. Recovery mode has another menu option about repairing grub but I don't want to try that. I'm not a power user and this is all over my head. Before I turn the laptop into an unusable door stop,
I just upgraded my stable 10.10 64-bit desktop edition VirtualBox guest to 11.04. Got no errors during the upgrade. When I try to boot into 11.04, it hangs on the boot screen where it says ubuntu with the 5 dots below that. There's no animation on this screen--I think the dots usually have a progressive animation?
I've attached a PNG screen shot of the hanging Ubuntu instance.
I've just upgraded to Natty. During the upgrade no errors showed. However, when I now boot ubuntu (either recovery mode or normal), the boot process hangs at:
'checking battery state'
I searched for similair problems in this forum, but the solutions in other posts(sudo apt-get update & upgrade etc.) did not help. I'm not sure if it is related or important, but when it hangs, it also shows something like:
'starting automatic crash reporter [fail]'
'not starting jetty'
'saned disabled'
(I can't copy there of course, so it is probably not exactly like this, or in this order...) What can I do to get my ubuntu boot again?
I've been using ubuntu for a couple of years rather successfully on my dual-boot Vista/Ubuntu. It upgraded to 8.0(4?) LTS, 10.04LTS and I kept it there until this afternoon I followed the instructions on the ubuntu site to open up a terminal and update-manager --somearg to provide me with a nice little "Upgrade" button on the update manager. I clicked said button per the instructions, let it do it's downloading and whatever else it does. The last step of the installation is a system reboot. I let it do that, and then my grub menu comes up as more-or-less this:
Code:
Ubuntu 10.04 LTS, kernel 2.6.32-32-generic
Ubuntu 10.04 LTS, kernel 2.6.32-32-generic (recovery mode)
Ubuntu 10.04 LTS, kernel 2.6.24-28-generic
Ubuntu 10.04 LTS, kernel 2.6.24-28-generic (recovery mode)
Ubuntu 10.04 LTS, kernel 2.6.22-14-generic
Ubuntu 10.04 LTS, kernel 2.6.22-14-generic (recovery mode)
Ubuntu 10.04 LTS, memtest86+
Other operating systems:
Windows Vista/Longhorn (loader)
If I select the top one, I get:
Code:
Starting up ...
with a blinking cursor under the S for a LONG time (used the power switch after ~40 mins). I tried the second 2.6.32-32 option for recovery mode. It spit a bunch of gibberish to the screen for a couple seconds and then stopped, presumably doing the same thing, just with 100% more gibberish. I tried booting into Vista, that worked fine. Just to reiterate, I've not yet seen a 10 LTS login screen or desktop, and can't get one yet (just a "Starting up ...") Just to add, I did try searching, but since the only info I had to go on was 8 LTS to 10 LTS upgrade, and "Starting up ...", well those are just hard keywords to get any meaningful info.
Recently i've upgraded my fedora 11 to 12 using the preupgrade command and now I have a problem booting! when i start the interactive boot it hangs after trying to run the service local, it looks as if its trying to boot because the cursor blinks really fast then blinks normally after a few seconds. no error was stated during the event. what seems to be the problem here?
View 3 Replies View RelatedI've attempted to upgrade my FC9 machine to the latest Fedora 12. I downloaded the iso image onto DVD and booted from the DVD into the installer GUI. Everything proceeded flawlessly until I tried to reboot from the new installation on the hard drive.When rebooting, the word GRUB appears and the system hangs. I've rebooted in rescue mode and the grub.conf appears to make sense, although I can't say that I understand all the entries. Based on some research, I suspect that the problem is ocurring even before grub.conf get read.
Can someone give me a tip on where to begin? I don't expect a detailed answer, but I don't even know where to get started. As far as I know, I have no unusual hardware configurations. No RAID, no booting from USB. The system is old (bought around 2002), but has plenty of memory and storage. One possible clue: my USB keyboard would not work during the installation phase, and I had to replace it with one that plugged into the PS/2 port. USB mouse seems to be fine.
I have just upgraded my desktop (x86_64) from Fedora 12 to Fedora 14, using a DVD.At the end of the upgrade I rebooted as instructed. The boot process never writes anything to the console. I don't see a cursor or a prompt. I can't do anything iexcept ctrl-al-del to reboot, so I appear to be completely stuck
View 2 Replies View RelatedI upgraded F14 to F15 using installation DVD. I have been upgrading since F11 with no problems. Upgrade went well, no issue. After the reboot, the system hangs after the last line systemd.
These are last lines from boot.log:
Starting LSB: start and stop xinetd...
Started LSB: Mount and unmount network filesystems..
Starting Permit User Sessions...
Starting xinetd: Started Permit User Sessions.
Starting Display Manager...
Started Display Manager. [OK]
Started LSB: start and stop xinetd.
Right now I am on system rescue CD, can mount partitions and read logs. I would like to avoid fresh installation if possible.
I have just completed a dual boot installation of FC10. The install was done from CD's I downloaded from the Fedora website. The installation (seemed to have) went fine, and the machine still boots into XP if selected from the menu. The Fedora installation does not complete the boot process. I have three bars that move across the bottom of the screen, and the Fedora 10 graphic tuns white, and then the system hangs. I have let it sit at this screen for as long as 30 minutes. The screen will blank occasionally, but returns to the same place if I hit a key on the keyboard.
I have it installed on an old HP E800 netserver, running dual P3-866mHz processors, 2GB ram, a ATI Radeon 7000 video card, and three 36GB SCSI drives, non-raid. I know FC10 will run on this machine, as I have a friend running it on another E800 without any problems. This machine does have on-board video that is disabled only by plugging a different video card in (Phoenix BIOS).
This is one of those newbie questions about where I look to find error messages so that I can understand what the issues might be. My Fedora 12 setup invariably always hangs whenever I login following a cold boot. I login to x/g-nome, the screen clears and the initial background appears and then that's it.
I've been getting out of this by switching to another TTY (CTRL + ALT + 2), login as root and issue "shutdown -r now". System re-boots and I can login normally. I can see a stream of messages, I think relating to x scroll up the screen rapidly after the shutdown command. I'm not fast enough on the Pause button to read them. My question(s) then is... is there somewhere I can look to see what those messages might be? From the symptoms described initially, anyone have any thoughts on what the issue is likely to be?
I currently dual-boot Windows Vista and Suse 11.2 on my Gateway desktop machine. I'd like to try out Fedora in a triple-boot situation.
My trouble is that the F13 Live CD hangs during boot. I've checked the hashes of the downloaded ISO files, and done burns on multiple media. During booting with the Live CD, my box hangs and I have to use the physical power button to turn off the box.
I've tried the 64-bit KDE spin (my preferred choice), the 64-bit GNOME version, and also the 32-bit KDE spin, and all of them hang at the same point. Removing the "quiet" boot option shows that it hangs after setting up my built-in card reader. When I installed Suse 10.3 on this same machine, I had to use the flags "acpi=off" and "brokenmodules=pata_it821x". Would the syntax be the same if I wanted to try with those boot options with the F13 Live CD?
Using the ISO files in VirtualBox inside my working Suse install works just fine.
I installed fedora on my second hdd, the other one had xp before fedora, now in grub it shows xp as other and wont boot into it, just hangs there. SDC is an external drive and sdb is the xp drive as you can tell by the filesystem.
Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x836db2c4 .....
I'm attempting to install F12 64 bit. I currently have F10 running on this system. I'd like to do a clean install. I'm using the DVD. I boot the computer with the DVD in. I choose the first option (Install or upgrade). It starts the boot process and then it hangs. [URL]
After asking at #Fedora I was given the advice to boot with `intel_iommu=off`. That gets me slightly further in the process. It gets to the point where anaconda is starting. Then all heck breaks loose. It appears the monitor loses the signal from the computer (power light turns red just like if the computer was off). The caps lock and the scroll lock lights on the keyboard blink about once a second. The DVD drive continues to spin for about a minute and then stops. Since I have no display, I have no idea what's going on.
I was using Ubuntu 9.10, until I got a new graphics card (Nvidia GeForce 9800 GT). After I got that upgrade, Ubuntu no longer supported that card for some reason, so I decided to try Linux Mint since it was a close relative to Ubuntu. Still no support for the video card.
I've always wanted to try Fedora so I decided to grab the x86_64 live cd and burn it. I stick it into my disk drive and it boots where it shows me the options to "Boot" "Verify and Boot" "Boot from Hard Disk" and one other option.
I tried the Boot option, and after selecting that, everything stalls, and my display turns off (not the entire monitor, just the display). I tried Verify and Boot, and still no luck.
I have also tried the i686 live cd and the same issue. It can not be the way I am burning it, cause I've gotten other live cd's to work with the same method of burning. Is it that Fedora does not support the card?
I am trying to get the GNOME version up and running.
I was running 10.10 until this morning when I upgraded to 11.04.{Some minor grub complaints in the install but mainly due to me having customised the entries.}I rebooted and went to the new installation, it goes purple and says Ubuntu 11.04 with dots going across, then it hangs and goes to the background text and the last thing it says is "Checking Battery State.I'm on a desktop, so I'm sure the battery thing isn't an issue, it's probably something before or the next command that freezes it.
I booted into recovery mode repaired grub (no change) then went into failsafe graphics mode and it worked ok.My guess is that because failsafe graphics was ok, it might be to do with the graphics driver (ATI HD6970 fglrx driver) but I've no idea.
If I turn off the quiet mode in the boot options, it does throw up some errors (e.g. SQASHFS), and then stops after "starting abrt daemon".
On an AMD Athelon. It worked fine of F9, but started playing up, so I'm looking at upgrading.
Have had a clean perfectly working copy of 2.6.31.6-166 for months and after two updates to 2.6.31.12-174.2.3 and 2.6.31.12-174.2.19, neither of the newer kernel versions will allow machine to boot properly. Start-up hangs at the preload daemon with a flickering screen. To use machine, must use grub chooser and choose the original base kernel.
Running on Tyan h2000m board, opteron 2356, Nvidia 9800 GTX+ and 12GB of dram with SELinux security enabled.
I just upgraded my OpenSuSE 11.2 system to 11.3 and have experienced the following problem:
My hard drive was encrypted beforehand, and after the upgrade(which went smoothly) will no longer decrypt. I type in my passphrase at the prompt, press enter and the start up process never resumes. I am able to access the filesystem from the Rescue System option in the install disk. What's strange is that this worked smoothly on another laptop of mine.
I performed a clean install of Fedora 15 from DVD and it goes fine until the end when the install program says to reboot the computer. Once I do that, the computer hangs before Grub loads, i.e. just after all of the BIOS messages, so there isn't any error message to indicate what is wrong. I had no issues with Fedora 14.
View 3 Replies View RelatedAfter installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
Recently I decided to upgrade my 10.04 installation the lazy way, by clicking the upgrade button instead of a clean install (32bit). Now, I can only get into Ubuntu with the recovery mode. If I let the system boot the normal way, I end up at the login screen where I (correctly) enter my password and then nothing else happens. I can move the mouse, the clock ticks on, and I can even use the restart button, etc. But the login screen stays gray and does nothing else, so no desktop. With recovery-mode I can use the failsafeX option to get into the desktop, everything works fine there. And even though it calls it a low-graphics environment or so, everything looks normal, its even my native resolution of 1440x900.
My first idea was some driver issue for my Ati Radeon HD 2600 Mobility card, so I looked into that. I've checked/done the following:
- Installed the drivers manually (downloaded from AMD)
- Uninstalled those drivers
- Used aptitude to remove any fglrx things
- Installed Jockey
- Installed the drivers with Jockey
- Removed the drivers with Jockey (Ive read this is the cleanest option)
- "no drivers" at this point
- Use generic/default X config, make specific X config (both from the failsafe X boot thing)
Nothing worked at all, booting still only works with recovery option and then the low graphics mode. Otherwise, it will just "hang" on the login part. When I boot first recovery mode, and then pick the resume option, I'll see some errors near the end of the booting process.
I've seen 2 errors which might be related to my issue:
- "Unable to allocate crypto cipher with name [ecb(aes)]" (home is encrypted, and accessible with safe boot)
- BUG: CPU#1 stuck for 61s!
Now, the second error seems to "match" with hanging at login. I login, something is stuck and churns the CPU... and never gets unstuck, so login just hangs there. However, I can't find any information related to that stuck CPU thing. Only changing PIDs and other numbers/stack traces, no processname or any other name to work with. So I'm at a loss here.
Big dump of possibly interesting part of kern.log:
Code:
Nov 26 20:31:25 lexmortis-laptop kernel: [44.572381] BUG: unable to handle kernel NULL pointer dereference at 00000021
Nov 26 20:31:25 lexmortis-laptop kernel: [44.572386] IP: [<c027c1b0>] sysfs_delete_link+0x30/0x70
Nov 26 20:31:25 lexmortis-laptop kernel: [44.572397] *pdpt = 0000000035f29001 *pde = 0000000000000000 .....
Despite that with low graphics mode everything works, it seems to be a non-graphical issue here (stuck CPU on some process?). Unless I missed another option I can test for the graphics / drivers. ow I could find more info on stuck CPUs during boot?
I'm running Lucid, and after one apt-get upgrade I get hangs with the mysql package: Preparing to replace mysql-server-5.1 5.1.41-3ubuntu11 (using .../mysql-server-5.1_5.1.41-3ubuntu12_i386.deb) ... no matter what I do I can't get it to remove or install the mysql package. I've tried doing:
sudo dpkg --remove --force-remove-reinstreq mysql-server-5.1 but even that just hangs forever. I just want to remove the package so I can install the other updates
I recently went the upgrade route and something went wrong either with the download or the installation or 10.04 and my hardware are having issues. I am looking for some advice for either fixing what is wrong or getting some additional data backed up to USB before wiping the partition and starting new.
My computer is dual-boot using Grub2, the other OS being Windows Vista. I can get to Windows Vista fine via GRUB. When I select Ubuntu (says kernel 2.6.31-21) though I don't get very far.
At this point I can get 10.04 all the way to the user selection screen, where it immediately freezes, forcing a hard reset. I can boot into recovery mode, but if I select failsafeX it freezes at the first screen that comes up--the notice you are running in low res graphics mode.
When I did the upgrade from 9.10 to 10.04 I used the update tool in Ubuntu. However I also now have a 10.04 install CD.
My graphics cards are twin NVidia 9600s in SLI. I would say it is a graphics card problem since the first graphical screen that comes up both in regular boot (the login screen) and failsafeX (the notice screen) I get a hard lock. However booting off the CD it loads the desktop just fine!
I would just wipe clean however my last data backup was partial and there is some stuff I would like to go back in and get. However neither method I have used to try and go back in to get what I need has succeeded. I have a 320G USB drive I use for backing up certain data. If I boot using the CD, it gives me an error message about the isntaller then goes to desktop (which works fine, even though I can't get past the login screen when booting 10.04 from the hard drive) I can then plug in the USB drive fine and it shows up, but some of the files on the Ubuntu installation don't give me permission to copy them. There is an 'X' on the icon and I don't know whether there is a way to get me authenticated in order to copy them from the CD desktop.
Alternatively, I can get to a root prompt if I boot into recovery mode (not the CD, just recovery mode from GRUB). I assume I can move them from there and that the permissions issue won't be a problem but when I plug in the USB drive I don't get any errors but I am not seeing it show up in /media. Also if I put a DVD-RW (all I have on hand) into my DVD-RW drive maybe I could back the data up to that, but I'm not familiar with how to do that from the command line.
If I could get to a point where I could verify that I have this extra bit of data backed up then I wouldn't have any problem wiping the partition and starting over.
Just upgraded to 10.04 from 9.10. upgraded from update manager. System would not boot. Booted live cd and used the 9.10 menu.lst. Now boots but takes a long time. I don't know much about the kernel. I assume they are listed in the /boot directory and are called by menu.lst (dual boot w/ XP) (btw: I am ready to get rid of XP once I get this fixed). 9.10 appears to use 2.6.31-20-generic, therefore, I assume 10.04 uses 2.6.32-25-generic.
View 3 Replies View Related