Fedora Installation :: F13 Update - Install Asking For IP Address
Jun 1, 2010
I am trying to update from F12 to F13. After following the guide from Fedora, I rebooted and it attempted to download the update. The download got to about 55 - 65% when a message about running out of space appears. The install then asks for an IP address to use so that it can download the updates as needed instead of all at once. I have been searching but not been able to find the IP address in question.
View 2 Replies
ADVERTISEMENT
Oct 1, 2009
I recently finished a fresh reinstall of Fedora 11 on my ASUS EeePC 1000HA today. Once I rebooted, it asked for the usual "first time user thing" and I proceeded. After that screen, I was brought to the loging manager, so I logged in, and was presented with my destkop. I fired up the terminal, added myself to the sudoer's file and did a "sudo yum update" but was given the following error (the beginning of the text got cut off due to how lengthy the update list was): [URL].
View 3 Replies
View Related
Dec 22, 2010
I have a new Acer computer with Windows 7 on the 640 GB hard drive and 12 USB ports. I want to connect hard drives to USB ports and boot them by changing the boot drive in BIOS and using the boot setup. I have an old 250 GB hard drive with Windows XP and another old 60 GB hard drive with Linux Fedora 10 or 11. On my old computer Windows XP was on the C250 GB hard drive and Fedora was on the secondary 60 GB hard drive using GRUB. tried connecting my old 250 GB Windows XP hard drive through an IDE to USB enclosure to a USB port restarted my computer, changed the first boot drive in BIOS to USB. I saved and exited BIOS. I then pressed F12. This caused a popup of a display showing all the USB ports. I was able to recognise my 250 GB hard drive. I selected it. I got a message "GRUB loading, please wait". I then got a message, "Error 17".
View 4 Replies
View Related
Jun 25, 2011
As the thread title suggests, I am getting error messages while trying to update a fresh install of the 64-bit desktop edition. Here are the errors:
Code:
Traceback (most recent call last):
File "/usr/share/PackageKit/helpers/yum/yumBackend.py", line 2316, in _update_packages
txmbr = self.yumbase.update(po=pkg)
File "/usr/lib/python2.7/site-packages/yum/__init__.py", line 3761, in update
available_pkg, updated_pkg)
[Code]...
View 2 Replies
View Related
Feb 10, 2010
I'm not sure if this is the right place to post this, but...well, I just installed Fedora after using Ubuntu for a while, and everything has been going good, except for installing upgrades. When I open the Update Manager, it says there is 399 updates. When I click install, after about ten seconds this pops up:Code:An internal system error has occuredA problem we were not expected has occured. Please report this bug in your distribution bugtracker wth the error description.
More details:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
[code]....
View 4 Replies
View Related
Dec 16, 2010
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
View 2 Replies
View Related
Aug 6, 2009
I have Fedora 9 running on my PC at home with no problems at all. However, during the past week, I am having problem updating the system with "yum update". I am getting an error telling me that the server cannot be reached (or something like that). So, I tried using the browser with the [URL] and indeed, the server cannot be reached. However, my network is working fine because I can browse anything on the internet. When I tried this at work, using the browser with the URL [URL] everything works fine; I can see all the directories and files.
1) Is this a problem of my ISP DNS?
2) Is the server (fedora.secsup.org) blocking me for some reasons?
3) Is there a new server address that I can use with "yum update", and if so, where (file) do I enter the address?
View 6 Replies
View Related
May 19, 2011
I am trying to install a Red Hat cluster on my servers. In order to configure an heart bit between the servers I must give a valid multicast address. I wanted to know if there is a way to validate a multicast address before using it. For example if it is already in use i don't want to use it.
I read a little about it and there is a Perl module called IO::Socket::Multicast: [URL] There is a tool called mcasttrest.pl: [URL] Oracle use it to test multicast. But I am not sure what will do the trick in Red Hat cluster.
View 1 Replies
View Related
Apr 30, 2009
I have a HP Officejet 6310 as a network printer
How do I find the network address of the printer so I can install it?
View 6 Replies
View Related
Jun 28, 2011
I installed F15 Xfce and now I keep getting the following message after i login: Could not loop up internet address for WXZ. This will prevent Xfce from operating correctly. It may be possible to correct the problem by adding WXZ to the /etc/hosts on your system. I tried a fresh install just to see if I did something wrong but I keep getting the same message.
View 4 Replies
View Related
Jul 14, 2011
This morning it would not boot; when I tried to wake up the system, it gave me a bunch of errors, the last ones being as follows: "mount error: could not resolve address for servername: No address associated with hostname mountall: mount /media/shares [1402] terminated with status 1" I am writing this in Win 7 since I lost ubuntu. I am using ubuntu 11.04.
View 2 Replies
View Related
Jan 31, 2009
I am writing a program which modifies source IP address of packet before writing this packet to tap interface. I face only one problem with tcp checksum. I have current checksum, to get new checksum, I add new source IP address and add one complement of old source IP address. That is, I update checksum with difference of old and new source IP address. It sounds not bad but does not work.
View 1 Replies
View Related
Apr 28, 2009
I've tried to use the GUI tool for update system in Fedora 10. It listed all of the available updates successfully, but it have not any response when i click the 'Update System' button~
View 2 Replies
View Related
Apr 3, 2011
I have DDNS configured and working for dynamic addresses, but it's not quite right for static addresses yet. The DHCP server assigns the static address, but it doesn't update the DNS sever with the associated host name. Which means I have to use the IP address when accessing the host instead of the host name. How can I get the DHCP server to update the DNS with the host name associated with the fixed-address?Here is my current dhcpd.conf.
Code:
ddns-update-style interim;
ignore client-updates;
[code]....
View 2 Replies
View Related
Mar 22, 2011
I changed my internet source from wireless to wired cable which came with a new IP address. Subsequently anytime I try checking for updates from the update manager it still refers me to my old IP address for wireless and here is the results I get:
[Code].....
View 1 Replies
View Related
Dec 28, 2010
I got this error"Requires installation of untrusted packages" when trying to install packages by Ubuntu Software center.I found many solutions here in forums, but nothing seems to work for me.
1. I tried to change server to Main server, Best server, even some others...
2. I checked the box in front of "unsupported updates"...
3. I tried update via sudo apt-get update
View 9 Replies
View Related
Jul 19, 2010
i am a new opensuse user from vietnam. I installed opensuse 11.3 last week, and i have a serious problem with repo. I can't enter it . It's mean i can't update (by update applet), install codec, new software, .
View 1 Replies
View Related
Jan 21, 2010
I want to install java 6 update 18.Mine is 64 bit Ubuntu OS.I have downloaded jdk-6u18-linux-x64.bin file from sun.java.comBut I don't how to install .bin file in ubuntu.Before that can i use above file to install.
View 6 Replies
View Related
Jul 22, 2010
IBM/Lenovo, ThinkPad X40 (circa 2005), 1.2G of RAM, 17.5G of HD (which reports some damaged sectors) - essentially a progenitor of netbooks in size I've been running 9.10 Karma Koala for about a year now since XP fell victim to a virus and I had lost my disc. I've very much enjoyed the stability of ubuntu, encountering only minor problems which have been easily fixed. I decided to allow my system to update to 10.04 via Update Manager, which it completed and attempted to reboot. My system would only display a black screen from then on out with no indication of loading 10.04. I downloaded and attempted USB reinstall with 10.04 and LTS, always ending with the same result. I'm curious if anyone has had similar problems due to unstable installers or should I assume my system is too old to move past 9.10 (which seems to run without difficulty). Not urgent for my purposes, but I'd like to stay with the supported kernel over time.
View 1 Replies
View Related
Jan 12, 2011
I have seen this before and it is doing it again, why does update manager ask for the install cd?
View 3 Replies
View Related
Apr 21, 2011
I am getting the following following error while installing or upgrading any software or package in Ubuntu 10.04. I followed many threads but could not figure out the right solution. I tried Synaptic too, but no success.
p { margin-bottom: 0.08in; } sylar@ubuntu:~$ sudo apt-get install -f
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
View 6 Replies
View Related
Oct 6, 2010
I downloaded the 6.06 version of xubuntu because i have a laptop that doesnt support high graphics mode, and i wasnt able to figure out how to get it to run in low graphics mode. i figured that i would get a version from a while back, and then update it up to the current version. now, to the problem. I was able to upgrade 6.10, but now it says Ubuntu version 8.04 available, so i tried to update it. it gets most of the way through the part where it says calculating or something like that, and then it says: "Can't install 'xubuntu-desktop' It was impossible to install a required package. Please report this as a bug." with an option that says close at the bottom. when i click close another window pops up that says: Could not calculate the upgrade A unresolvable problem occurred while calculating the upgrade. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bugreport. Then the window just closes... anything that i could do to get rid of this problem? EDIT: Is there any way to update directly from an .iso file on the desktop?
View 1 Replies
View Related
Sep 1, 2010
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
View 5 Replies
View Related
Dec 10, 2009
How do I update from FC10 to Fedora 12 from the command line.
View 2 Replies
View Related
Apr 14, 2010
I should install a new openSuse 11.2 or if I should make an Update-Installation from DVD (see openSUSE 11.2 Installation Quick Start Installation Mode: Select Mode - New Installation / Update / [...]) or an Update Installation via Yast.Now I am using openSuse 11.1 and Gnome 2.24.1 (mostly, 1 account is using KDE) and Kernel Linux 2.6.27.45-01.1-pae. "/home" is on an separated partition (as part of an extended partition).
Contra new installation?:
- I have an Laptop (Samsung x20) with integrated intel 915 graphic and an very hight resolution (1400x1050). The monitor's resolution is not listed in the bios of the graphic cart/solution. Because of that I had many problems with my fist installation of suse/openSuse linux.
- Will I have problems to keep my old accounts?
Pro new installation?:
- Sometimes funny system reports (mostly about ICE).
- I have been logged in as root in Gnome (as I had some problems with (no) audio, the digital optical audio out is still not running).
- I think the fist installation was a few years ago maybe I had been to often "bold".
View 9 Replies
View Related
Jan 26, 2010
It seems that I really don't know how to update/reinstall a new library for my DigiKam.Since there is no .deb package, I would like to install Libraw-0.8.5 from source code (URL...) and it happens that I just don't know what to do.Please, help me to install this library so I can finally process the files from my new camera.
View 2 Replies
View Related
Feb 19, 2010
Reading the list of updates in my UNR 9.10 install I was quite surprised to see a few new installs in the list:
Distribution updates
alien
bsd-mailx
build-essential
debhelper
dpkg-dev
[Code]...
This looks wrong to me, what could cause it to push loads of dev/build tools and the redhat package manager on me? Edit: Unticking these also unticks a "google-chrome-beta" update below. Does this mean they are now dependencies of that package?
View 6 Replies
View Related
Feb 20, 2010
Every time I try to do update or install a new software, it stops me, I tried to do update through the terminal but it didn't work, giving this error message : E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.
[Code]...
View 1 Replies
View Related
May 4, 2010
I'm running Ubuntu 10.04 64 bit as a VirtualBox (3.1.6) guest. Every time I try to run apt-get update, I get the following:
[Code]...
View 3 Replies
View Related
Dec 6, 2010
I'd like to update /etc/apt/sources.list with all the packages available on packages.debian.org and packages.ubuntu.com without apt-get, aptitude, and synaptic then trashing my system by trying to update all the obsolete packages. (I'm stuck with 8.04) I only want to update the packages / install new ones with their dependencies as I request them. How do I do that?
View 9 Replies
View Related
