Fedora Installation :: Dual Boot "Error 17: Cannot Mount Selected Partition"
Mar 29, 2009
I have a vista machine I recently put FC10 on. Through the course of figuring out wireless drivers, I goofed it enough that I was told to simply reinstall linux. I had the fedora GRUB file set as I wanted. But after I re-installed FC10 it would just hang after it searched for bootable CDs and stuff. I got the super grub CD and am able to boot into windows no issue. HOWEVER, when I select the fedora option, I get
"Error 17: Cannot mount selected partition"
I assume this means the grub doesn't know where my Linux boot stuff is. I have a separate drive dedicated to the linux install. The Vista drive is where the MBR is. So... how do I tell the grub where the FC10 install is? I've tried to reinstall FC10 twice hoping I just goofed something. edit: The standard grub file was in /boot/grub or something. Is there a file I can edit to point in the right direction?
View 1 Replies
ADVERTISEMENT
May 28, 2010
When upgrading F12 to F13 I had a fatal error when I selected to update grub so I opted to do a fresh install of grub and the upgrade proceeded without any further problems. When I went to boot the system (dual-boot with Win 7) grub gave me error 17 "cannot mount selected partition". So I booted into rescue from the install disk thinking that maybe reinstalling grub might help, but when I ran "grub-install /dev/sda" I got the message that "/dev/sda does not have any corresponding BIOS drive" (I have Windows on SATA 1 sda and Fedora on SATA 2 sdb). I exited rescue mode rebooted entered BIOS and swapped the drive order and restarted. Success!... Well almost. The progress bar goes all the way across the screen to the point the login screen should come up then it hangs...
View 8 Replies
View Related
Oct 10, 2009
I am having problems with grub. Originally I was having trouble installing Service Pack 2 for vista and I made the fool's mistake of changing the active partition in disk management from the boot partition to the windows partition. This blew up grub. After restarting I was dumped at the grub terminal i.e.
grub>
so I thought okay, I will just reinstall grub. I ran setup (hdx,y) but now when I restart first of all the splash screen is different, rather then the blue background with the big words in white, fedora 11, it's black and I get a error saying unable to read any images. I can see the different OS' I have on the grub screen but attempting to load any of them gives me
error 17 cannot mount selected partition.
I am currently running the Fedora 11 xfce spin live cd. From the terminal here, here is some information. sda3 is my fedora 11 partition I am not sure maybe it is because of ext4 but I can't seem to mount it using mount /dev/sda3 /mnt/xxxxx.
[root@localhost grub]# fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x72edceee
Device Boot Start End Blocks Id System
[Code].....
View 11 Replies
View Related
Jun 4, 2010
I dualboot Ubuntu and Fedora in one hard drive. Below are the scenario.
First, installed Ubuntu 10.4 on the entire disk (40GiB of size). Then, shrink the Ubuntu installation to equal size to free up space for fedora.
Second, installed Fedora 13 using the option "Use free space on selected drives and create default layout". After the successful installation fdisk -l shows,
Code:
# fdisk -l
Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
View 2 Replies
View Related
Jul 22, 2010
I 've reinstalled XP partition on my ubuntu system 8.10 ,After that i reinstalled grub using live CD ubuntu 9.04
With the following commands:
but when i restarted the system i got the grub menu .. but when i select ubuntu i got the following error message: " error 17 .. can not mount selected partition "
View 1 Replies
View Related
May 10, 2010
I have a Dell VOSTRO laptop that I use for windows Vista. I have an old disk drive that I put into a USB case and now I want to use that for a Debian system. I do not want to install grub on my laptops HDD, if I do I need to have the USB HDD plugged in everytime I boot and i find that a real pain. I installed Debian on the USB drive with no problem and when it asked where I wanted to install GRUB I picked the USB drive ( I think ). Now when I interupt the boot and tell it to boot from the USB drive grub comes up with the correct menu but when I pick Debian I get the following messages:
Booting 'Debian GNU/Linux Kernel 2.6.26-2-amd64' root (hd1,0) Filesystem type unknown partition type 0xde kernel /boot/vmlinuz-2.6.26-2-amd64 root=/dev/sdb1 ro quiet Error 17: Cannot mount selected partition
View 7 Replies
View Related
Apr 19, 2011
I've tried everything to solve this, been browsing the forums for the last 2 days and no solution has worked. So I got a new netbook (Samsung n150 dated 03/2011) it had ubuntu 10.10 installed but I already use ubuntu on my macbook so I'm trying out knoppix, I booted it from usb and ran the HD installer, it gets through all that and then installs grub ok, but when I reboot I get "Error 17: Cannot mount selected partition"
Things I already tried: Grub setup (grub, root (hd0,1), setup (hd0), quit) and every variation. *I tried removing the usb and setting the HDD back to first boot in the bios and then changing the menu.lst accordingly, still I get error 17. Below is the information just after boot with the usb still plugged in and set as first boot in bios.
[Code]...
View 3 Replies
View Related
Jul 9, 2010
I installed Mac OS X 10.6, Windows 7 Ultimate, and made 4 partitions.OSX and 7 installed fine, but when I tried to install SUSE, it stopped at 92%.I get this error:
Code:
grub>setup --stage2=/boot/grub/stage2 --force-lba (hd0,3) (hd0,3)
Error 17: Cannot mount selected partition
grub> quit
View 2 Replies
View Related
Apr 19, 2011
I've tried everything to solve this, been browsing the forums for the last 2 days and no solution has worked.So I got a new netbook (Samsung n150 dated 03/2011) it had ubuntu 10.10 installed but I already use ubuntu on my macbookso I'm trying out knoppix, I booted it from usb and ran the HD installer, it gets through all that and then installs grub ok, but when I reboot I get "Error 17: Cannot mount selected partition"Things I already tried:*Grub setup (grub, root (hd0,1), setup (hd0), quit) and every variation.*I tried removing the usb and setting the HDD back to first boot in the bios andthen changing the menu.lst accordingly, still I get error 17.Below is the information just after boot with the usb still plugged in and set as first boot in bios.fdisk -l
Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
[code]....
View 9 Replies
View Related
Dec 15, 2010
i ran into this issue only because i wanted to learn. I was reading the book, linux troubleshooting and decided to give it a try.
1) I went to /boot/ and moved vmlinuz (kernel file) to my home directory. (/root/)
2) I booted, it didnt boot (as expected) and now the troubleshooting part begins.
3) i entered to grub config mode using c
4) When i press root (hd0, (tab) it gave me 2 partitions. hd0 which is my boot partition hd1 which is my '/' partition. Please keep in mind its LVM and not a physical partition
5) If i do this, root (hd0,1), and press boot, it gives the following error Error 17: Cannot mount selected partition
During my research i found that, LVM is not supported by grub, so kindly confirm me this ? is this the reason i am not able to access my root partition ? i am doing this on vmware so no issues, but just for the sake of learning, can someone tell me some way of restoring it without using any rescure disk (livecd, liveusb etc) ?
View 26 Replies
View Related
Jun 3, 2011
I installed 15. I have reformatted the 500mb /boot partition, didn't touch the swap partition, formatted the / partition. Trying to boot, I receive a "cannot mount selected partition". This is a fresh install. I rebooted into the Live CD to do some FS Checks, and got kernal crash, black screen, lots of kernal output while in live CD trying to do FS checks. The only line that looks like it holds any info that may be relevant is the last of the lines that says: Kernal Panic - Not Syncing: Fatal exception interupt PID 1161, comm:irq/21-0000:01: tainted: g d (kernal version) Panic+0x91/0x19c
I did an FS check on /boot and it came back fine. I did an FS check on /, and it came back fine. But then I told it to do an FS check on swap and got the warning that swap is currently mounted, and that if I proceed, it could cause serious system damage, and asked me if I wanted to proceed. I chose no, and it crashed.
---------- Post added at 02:59 AM ---------- Previous post was at 02:42 AM ----------
wait, i think i found the problem. It APPARENTLY installed /boot as ext4. Reinstalling now. Will update momentarily...
---------- Post added at 03:06 AM ---------- Previous post was at 02:59 AM ----------
Nope, i explicity made sure i installed ext3 on boot this time, and it still gives the same boot error, AND i KEEP getting that kernel crash.
View 1 Replies
View Related
Feb 19, 2010
I attach a picture of my future disk partitioning,as I thought it should be. As you can see, the first two partitions are 2 different windows installations. At the end of the disk, I have specified a partition as ext3 104855 MB (sda9) and swap 8192 MB (sda. What should the the mount point of sda9 be? Should I specify a partition for /, /boot, /home, /tmp, ...etc? Or it is ok to make mount point '/'?
View 5 Replies
View Related
Jul 9, 2010
I am a regular user of ubuntu . I reinstalled my window XP ( windows / ubuntu dual booting )
after that i give the commands
grub > root (hd0, 6)
>setup (hd0)
after that when i restart the system i got the following message
" error 17 can not mount selected partition "
when i selected ubuntu
View 3 Replies
View Related
Mar 9, 2010
Can i mount the partition on which windows is currently installed in (dual boot, win and ubuntu) and navigate through its folders and take files, eg. pics, songs... to place on my ubuntu desktop. Just wondering, im trying to get others used to linux enviroment and want to start transfering things wihtout making it too drastic for them. The process that i described above doesn't have to be exactly like that, but basically anything that gets me similar results.
View 9 Replies
View Related
Nov 19, 2010
Currently I'm running 3 operating systems on my machine (in order of installation); Windows XP, Windows 7 and Fedora 14. Unfortunately, after I installed Fedora I'm no longer able to boot Windows 7/XP. When I select the "Other" option in the Grub menu, I get the following error:
Code:
Error 21: Selected disk does not exist
To provide more info, here is a boot info script result:
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Windows is installed in the MBR of /dev/sda
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive in partition #3 for /grub/stage2 and /grub/grub.conf.
=> Windows is installed in the MBR of /dev/sdc .....
mdadm: No arrays found in config file or automatically
View 4 Replies
View Related
Mar 7, 2009
I'm trying to achieve my dream (but indeed not perfect) boot scenario: dual-boot OpenSUSE and Fedora with shared /boot, /home and SWAP partitions. First I installed OpenSUSE (sda3 on my layout below) with separate /boot (sda2), /home (sda5, encrypted) and SWAP (sda6), next I installed Fedora on /dev/sda1, and pointed it to mount sda2, sda5, sda6 with respective mount points, without formatting. I proceeded with the installation without installing new GRUB bootloader (overwriting an existing one).
It was successfull and now I'm back in OpenSuSE trying to edit menu.lst file (under /boot/grub) to make GRUB boot Fedora.
I attached a copy of menu.lst I cooked up for now. OK, it's a mess. Life would be allot easier if I didn't have a separate /boot partition, as I could just chainload, but it's no longer possible (or is it?). May be I needed to specify the resume device or problem is in initrd? below are the contents of /boot:
View 4 Replies
View Related
Nov 28, 2009
I have a computer with windows xp on it, and i want to dual boot with fedora 11. I have 2 hard drives in it, 1 500gb HD and 1 350gb HD. the 350 isnt much concern b/c its just sitting there all free and unpartitioned right now. Now my 500gb is split into 3 partitions, a 20gb(with xp installed on it) a 105 gb with pretty much nothing on it and a 350gb with all my data.
My problem is I'm trying to resize my 20gb partition through the fedora 11 installer and when I tell it to resize say to 10gb it starts and fails the resize. its a NTFS partition and the windows stuff on the partition is only about 8gb. any idea whats going on? the only error I get is "The resize has failed"
View 3 Replies
View Related
Feb 12, 2010
XP and Ubuntu are on different drives and they were booting ok prior the the reformatting. With the Ubuntu drive selected as the 1st hd boot device in Bios: I can boot into Ubuntu ok if I select it in the Grub2 menu If I select XP in the Grub menu I get:
"error:no such device c8e4918ce4917cfe"
If I select the XP drive as the 1st hd boot device in Bios I can boot straight into XP.So that is ok. This thread: [URL] has given me a clue that: "The UUID listed in grub.cfg is wrong In some cases the UUID in the above search line in grub.cfg is wrong. This can for example happen if the UUID has changed due to formatting or partitioning. Bugs The "search" function is plagued by various bugs (see [1], [2]), causing the search to fail."
However the fix in that thread gives me this result: "At the grub menu at boot up (you might have to hold the "shift" key or press "Esc" to get to the Grub menu) select the OS you are trying to boot. But do not press "enter", press "e" instead to edit the menuentry. Delete the line
search --no-floppy --fs-uuid --set 86d32ee3-aec6-490b-8dab-e5cfff9c7af9
and then press "Ctrl+X". This should boot your OS. If you were not able to boot into you OS, you are infected by a different problem and should not continue this howto." My Boot info script results are:
Code:
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
[code]....
View 9 Replies
View Related
Jan 20, 2010
I installed Ubuntu 9.10 on my laptop. Thereafter, I installed Fedora 12 on another partition. Now when I boot, my bootloader lets me select Fedora 12 or Ubuntu, kind of. When I select Ubuntu I get ERROR 13. Now... when I installed Fedora 12, I selected Ubuntu (or I thought) as another OS. Guess I messed up.
I need to know how I would fix this problem. I know it has something to do with GRUB, either its' conf file or the menu list, but I really don't know how to make the changes.
View 9 Replies
View Related
May 25, 2011
I did a fresh install of F15, and I can not get it to boot
Quote:
Booting Fedora (2.6.38.6-27.fc15.x86_64)
root (hda,4)
Error 21: Selected disk does not exist
Press any key ton continue ...
The contents of my fstab
Quote:
UUID=9fc649bd-ea40-44ab-88f6-29afe4f26576 / ext3 defaults 1 1
UUID=2437a8af-311a-4caf-99b3-1f137df69d43 /home ext3 defaults 1 2
UUID=a6f67606-ecb6-47c4-8913-f101fc6a097e swap swap defaults 0 0
[code]....
From what I can figure out, grub can not figure out which disk has my root file system. I checked the partition labels and they match the UUID that are in my fstab.
View 5 Replies
View Related
Mar 7, 2009
I am new to Fedora, having used Ubuntu for 2 years. However, I am a little dissappointed in the latest Ubuntu releases and want to try something new. So I installed Fedora 10 on my second hard drive, deleting Ubuntu. On my first hard drive, I have Vista installed. During installation I followed a guide for dual-booting and it said not to install Grub to the MBR of the Windows partition, so I followed that advice...
This caused a Grub error 15 on the next boot. I booted the Fedora installation from the second hard drive. My hypothesis is that the Grub bootloader of Ubuntu was still installed somewhere and it could not find the Ubuntu linux kernel. Therefore, it gave error 15. So I installed Vista again and am hesitant to try Fedora again... How can I install Fedora alongside Vista properly (as dual boot)?
Or should I stay away, because it is apparently too difficult for me? Is it worthwhile to make a separate /home partition as I read that it is preferred to do a clean install every release? Could I just do that with Gparted and then assign the partition as /home in the Anaconda installer? The downside is that I then need to create a swap and / partition too, right?
View 6 Replies
View Related
Jul 5, 2011
I just installed Fedora15 on my laptop. When the installation completed, the system rebooted and gave me a Grub Error 17. I logged in the rescue mode and got the following output from
Code:
fdisk -ls
Code:
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0d8b0d8a .....
View 5 Replies
View Related
Jan 5, 2011
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies
View Related
Sep 10, 2010
When I run lilo (/sbin/lilo), it messes up my /boot partition. Next time I try to mount it after running lilo, I get an error: "mount: Stale NFS file handle" (I define -t ext2). My /boot partition is ext2, mounted locally, and not nfs. Then I do fsck /dev/sda1, and I get several: Free blocks count wrong for group #0 (7665, counted=5063). Fix<y>? I say yes to all and it works normally afterwards. This happens only after I run lilo. Lilo is installed in MBR.
Here is relevant configuration:
Code:
root@darwin:/home/cabrilo# cat /etc/lilo.conf
append=" vt.default_utf8=0"
boot = /dev/sda
bitmap = /boot/slack.bmp
bmp-colors = 255,0,255,0,255,0
bmp-table = 60,6,1,16
bmp-timer = 65,27,0,255
prompt
timeout = 30
change-rules
reset
vga = normal
image = /boot/vmlinuz
root = /dev/sda3
label = Linux
read-only
This is my partition table:
Code:
root@darwin:/home/cabrilo# fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x8f800200
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 104422 83 Linux
/dev/sda2 14 144 1052257+ 82 Linux swap
/dev/sda3 145 3432 26410860 83 Linux
/dev/sda4 3433 19457 128720812+ 83 Linux
And this is my fstab:
Code:
root@darwin:/home/cabrilo# cat /etc/fstab
/dev/sda2 swap swap defaults 0 0
/dev/sda3 / ext4 defaults 1 1
/dev/sda1 /boot ext2 defaults 1 2
/dev/sda4 /home ext4 defaults 1 2
#/dev/cdrom /mnt/cdrom auto noauto,owner,ro 0 0
/dev/fd0 /mnt/floppy auto noauto,owner 0 0
devpts /dev/pts devpts gid=5,mode=620 0 0
proc /proc proc defaults 0 0
tmpfs /dev/shm tmpfs defaults 0 0
View 4 Replies
View Related
Feb 15, 2010
After installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
View 2 Replies
View Related
Jan 21, 2010
I'm trying to understand how I can partition my hard disk to allow for a dual boot (Windows & Ubuntu) as well as allow access to a certain set of files from both Windows & Ubuntu. So far I understand that I'll need:
1 Windows boot partition ~2-4GB
1 Linux boot partition ~2-4GB
1 Linux swap partition ~1-2 GB
But I don't know:How can I keep my non-boot linux files & folders -- /home, /usr, etc. -- separate from the boot files? Do I need another partition? If yes, what size & format -- FAT32, ext3, etc. -- should it be?
If I separate, for instance, the "/home" folder only where do the remaining folders and files reside?
How can I access certain files with both Windows & Ubuntu? Do I need yet another partition, formatted in FAT32?
View 2 Replies
View Related
Apr 24, 2010
I would like to install XP to /dev/sda5,sda6 being karmic. (I may have a dying dvd burner as was unable to install it yesterday but..) I got in a dreadful mess with grub after attempting to upgrade to Lucid,I needed to reinstall anyway. Will I be able to dual boot or should I just start from scratch?
View 4 Replies
View Related
Mar 22, 2010
System Layout:
Alienware M17 Laptop
2.26 GHz Quad-Core CPU
4.0 GB DDR3 RAM
Hard Drive #1: Toshiba 500 GB 7200 RPM
Hard Drive #2: Toshiba 100 GB 7200 RPM
What I was thinking of doing was putting Windows 7 Ultimate (64-bit) and Ubuntu 9.10 (64-bit) on the 100 GB hard drive - with just under a 75/25 split towards W7 (approximately 70 GB for W7 and 22 GB for Ubuntu). Would this be optimal, having the operating systems on one drive separate from nearly everything else?
Another question that I was unsure about with this setup was the swap area. It doesn't need to be on the same HDD as the running OS to be utilized, does it?
Also, any partition size adjustment recommendations.
View 3 Replies
View Related
Feb 18, 2010
I must say that until now I have worked with Win2000/Xp. Long time ago I worked with Xenix and in the last 2 month sometimes with Ubuntu.Now I have brought a new PC with 320Gb HD and 4 Gb RAM, and I wish to built a dual boot system, with Win7 and Ubuntu.
View 3 Replies
View Related
Feb 22, 2010
Absolute newbie to Linux (assume I'm a complete dummyhead. I don't understand anything about Linux.). Just bought 500GB HDD. Made 3 partitions, 1 for Linux, 1 for Windows, and 1 for data.
1st, installed Win XP on 2nd partition (NTFS)
Then installed 64-Bit Ubuntu on 1st partition (Ext4)
(Created a 2 GB partition and for the swap file.)
Not sure which partition is primary, extended, etc., never really understood all that stuff anyways. XP was working perfectly, till I installed Ubuntu. Now, it just boots straight into Ubuntu, doesn't give the option to boot into XP. Tried everything I know, but it will not give the option to go into XP.
View 9 Replies
View Related
