Red Hat / Fedora :: Multi Boot: Selected Disk Does Not Exist?
Nov 17, 2010
Currently I'm running 3 operating systems on my machine; Windows XP, Windows 7 and Fedora 14. I've installed them in the following order: XP -> Win7 -> Fedora14, with the idea that this would work fine regarding operating system selection at boot time.
But unfortunately, I just installed Fedora, and now I'm unable to boot Windows 7/XP. When I select the "Other" option in the Grub menu, I get the following error: Code: Error 21: selected disk does not exist To provide as much info as possible, here is a boot info script log:
[Code]...
View 3 Replies
ADVERTISEMENT
Nov 19, 2010
Currently I'm running 3 operating systems on my machine (in order of installation); Windows XP, Windows 7 and Fedora 14. Unfortunately, after I installed Fedora I'm no longer able to boot Windows 7/XP. When I select the "Other" option in the Grub menu, I get the following error:
Code:
Error 21: Selected disk does not exist
To provide more info, here is a boot info script result:
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Windows is installed in the MBR of /dev/sda
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive in partition #3 for /grub/stage2 and /grub/grub.conf.
=> Windows is installed in the MBR of /dev/sdc .....
mdadm: No arrays found in config file or automatically
View 4 Replies
View Related
May 25, 2011
I did a fresh install of F15, and I can not get it to boot
Quote:
Booting Fedora (2.6.38.6-27.fc15.x86_64)
root (hda,4)
Error 21: Selected disk does not exist
Press any key ton continue ...
The contents of my fstab
Quote:
UUID=9fc649bd-ea40-44ab-88f6-29afe4f26576 / ext3 defaults 1 1
UUID=2437a8af-311a-4caf-99b3-1f137df69d43 /home ext3 defaults 1 2
UUID=a6f67606-ecb6-47c4-8913-f101fc6a097e swap swap defaults 0 0
[code]....
From what I can figure out, grub can not figure out which disk has my root file system. I checked the partition labels and they match the UUID that are in my fstab.
View 5 Replies
View Related
Mar 7, 2011
Plan to use GRUB for multiple booting to select the OS but only with luck have I got it partially to work. Windows 98 and Puppy 431 O.K on first HDD but Puppy 421 on second HDD /dev/sdb1 stops at error 21.
View 6 Replies
View Related
Feb 12, 2009
I've downloaded Ubuntu 8.10 and I have installed it within ms windows. My first problem was when I went to boot Ubuntu and the graphics weren't right so I rebooted it with a different graphic configuration and it installed successfully. When I went to boot Ubuntu a second time to actually use it I got the following error:
ALERT! /host/ubuntu/disks/root.disk does not exist. Dropping to a shell!
BusyBox v1.10.2 (Ubuntu 1:1.10.2-1ubuntu6) built-in shell (ash)
View 2 Replies
View Related
May 9, 2011
I have a new Hard Disk and i need to make a multi boot The idea is: a single home directory and clean installations of:
Ubuntu 11.04
OpenSuse
Fedora
BackTrack
Debian
The problem is:
Can anyone tell me what order its better to install?
Can I install systems of 32 and 64 bits (for example Ubuntu 64 Bits and BackTrack 32 Bits)?
What other operative system recommends?
The mission is simple: Help my family to use different Linux distros.
View 5 Replies
View Related
Apr 8, 2011
As described in further detail below I am looking for some help in Ubuntu 10.10 with a multi-monitor + multi-gpu setup using both ATI and Nvidia video cards installed within the same system (que scoffs and jeers). Is it possible to sucessfully run both ATI and NVidia GPU's and Drivers simultaneously in Ubuntu 10.10 (think multi-monitor environment)? I am asking b/c I am having trouble figuring out how to manage my video cards - particularly ATI - within a multi-monitor + multi-gpu video card environment.
Here's the setup:
Ubuntu 10.10 Maverick Meerkat
x2 - NVidia 6800XT SLi GPU's + 2 DVI outputs/per card (Serviceable card for my needs)
x1 - ATI Rage XL PCI Card + 1 VGA output (Yes, ancient hardware...I know)
[code]....
View 4 Replies
View Related
Mar 18, 2010
I'm trying to install Fedora onto a computer that has Windows XP on the first of two SATA drives. Windows 7 is on the second drive.
I installed Fedora no problems on a 14 gig free space I created on the first drive and told it where and what my other OS's were. Fine so far. I didn't tell it to overwrite the MBR on the XP (first) drive. I took the second option which I "think" put the boot loader on the fedora partition.
All good - till I rebooted and I just saw my Windows 7 loader with my options for XP and Windows 7 but no Fedora.
So, if I overwrite the MBR on the first drive, will that mean I can't access my Windows 7 installation?
How SHOULD I set up the boot loader?
View 4 Replies
View Related
Mar 29, 2009
Ive loaded 64studio (hda6) grub in MBR, and fed10 grub on its partition (hda8), but from Studio it seems i cant Mount fed10 files to look at the Kernel path from MBR. (studio did not auto pick it up, like it did for Mandriva on hda7)
Does anyone know what it is ? something like kernel /boot/vmlinuz.....and Initrd(hd0,7)/boot.initrd.img .....then i can Edit menu.Lst in MBR grub.
View 4 Replies
View Related
May 17, 2010
So I'm new to modifying Grub, and I've recently setup my laptop to contain all of Windows 7, XP, and the Fedora 13 beta on a single drive.Grub is currently setup to boot to Fedora, and the Windows 7 boot loader, and from there I can boot to XP.I'd like to set it up however, to have XP boot "directly" (i.e. bypass the 7 bootloader and go straight for the XP loader).The current setup is:
Partition 1: 7 ntfs on sda1 (primary)
Partition 2: sda2 (extended containing sda5 XP ntfs)
Partition 3: sda3 ext4 containing /boot
[code]....
View 5 Replies
View Related
Jul 17, 2010
I am currently booting 4 flavors of Linux - Ubuntu 10.04, Xubuntu 10.04, Linux Mint 9 KDE RC and Linux Mint 9 Gnome. There is so little difference between Ubuntu Gnome with the right packages installed and Linux Mint 9 it is redundant and I would like to replace it with Fedora 13 and try that out for a while. I understand that Fedora still uses a legacy Grub while the others are all using Grub2. I also understand that the two bootloaders do not get along. Is there a way to do that? How? If I have Fedora install its legacy Grub to the Fedora partition will Grub2 see Fedora and update itself properly? I'm open to starting clean if that would simplify things.
View 4 Replies
View Related
May 5, 2009
Having already borked my system once while deciding to nstall Fedora 10 under the influence of a false sense of bravado, alcohol induced, I thought I should ask for a little insight before trying things again. Once I get my system fixed and before consuming alcohol that is.Short version:I thought Id be smart and mount the /home partition I use for openSUSE as /home for Fedora, I mean that why I made /home it own partition right? Well, thatwhen the alcohol took over and I thought I be rilliant(not so much) and just use my SUSE username for Fedora too, since, you know,e already got all my files and settings stored there.
Thus my request for the answer on how to correctly use the same /home partition across multiple OS installations; with the preferred goal of retaining access to email folders, various files, games (WINE) and such no matter what distro I�m using. Would it really be as simple as just not using the same user name for more than one distro? What addtional issues does that solve/create
View 3 Replies
View Related
Oct 16, 2009
my Fedora 11 system is not starting anylonger. It stops with the message:
Code:
VFS: Can't find ext4 filesystem on dev dm-0
The system told me since a while, that a lot of the sectors of one disk of the (software) RAID compound are failed already. So tried to disconnect each of the disks and start them separately. Unfortunaltly this is not working (for one its is not working at all, the other wents the same far as with both), when I tried to recover the system with the Fedora DVD, it said no distribution found. I am quite new and do not know so much about linux system, so i do not know what further information you could need. Maybe it can be important, that both disks are encryped (the system wents so far, that I can type in the password).
View 2 Replies
View Related
Jul 18, 2010
i am new to linux and i nid a bash script to Delete selected backup files and also restore selected backup file to a user define directory.
View 3 Replies
View Related
Oct 3, 2009
I have a multi-user machine with several network interfaces (Ethernet, if that matters). I wish to grant selected users, or groups, full access to selected network interfaces (including ability to adjust IP address and to bind to low ports, but *only* on those interfaces). It is important to me that an user/group does not such full control over other interfaces. Granting partial, or temporary, root permissions is OK; it's a friendly environment.How do I go about it?System: Linux 2.6.recent; usual Debian setup (can be adjusted if needed).
View 2 Replies
View Related
Mar 29, 2009
I have a vista machine I recently put FC10 on. Through the course of figuring out wireless drivers, I goofed it enough that I was told to simply reinstall linux. I had the fedora GRUB file set as I wanted. But after I re-installed FC10 it would just hang after it searched for bootable CDs and stuff. I got the super grub CD and am able to boot into windows no issue. HOWEVER, when I select the fedora option, I get
"Error 17: Cannot mount selected partition"
I assume this means the grub doesn't know where my Linux boot stuff is. I have a separate drive dedicated to the linux install. The Vista drive is where the MBR is. So... how do I tell the grub where the FC10 install is? I've tried to reinstall FC10 twice hoping I just goofed something. edit: The standard grub file was in /boot/grub or something. Is there a file I can edit to point in the right direction?
View 1 Replies
View Related
May 28, 2010
When upgrading F12 to F13 I had a fatal error when I selected to update grub so I opted to do a fresh install of grub and the upgrade proceeded without any further problems. When I went to boot the system (dual-boot with Win 7) grub gave me error 17 "cannot mount selected partition". So I booted into rescue from the install disk thinking that maybe reinstalling grub might help, but when I ran "grub-install /dev/sda" I got the message that "/dev/sda does not have any corresponding BIOS drive" (I have Windows on SATA 1 sda and Fedora on SATA 2 sdb). I exited rescue mode rebooted entered BIOS and swapped the drive order and restarted. Success!... Well almost. The progress bar goes all the way across the screen to the point the login screen should come up then it hangs...
View 8 Replies
View Related
Apr 16, 2011
Reboot and select proper boot device or insert boot media in selected boot device and press a key. I got this error after: Reducing my Windows 7 partition by about 100gb. Creating a new partition (100gb) and copying my Ubuntu partition (10gb) to the new partition. After it was copied, and pasted, the original partition was deleted. I now had two partitions a new 100gb Ubuntu partition and a 600gb (or so) Windows 7 partition.
All of this was done using a bootable USB with Ubuntu 10.10 and GParted partition editor. Now when I boot I get the "Reboot and select proper boot device or insert boot media in selected boot device and press a key." error.
View 9 Replies
View Related
Apr 30, 2011
long story, I upgraded my system from maverick to natty, didn't like it so restored my system with a backup that I had done recently. after it rebooted I used gparted live CD to expand my partition, moving swap to the end of the HD, then when I rebooted grub didn't work so I booted with ubuntu live cd and reinstalled grub. then I booted normally but nautilus didn't work and had lots of problems. So I installed ubuntu again with ubuntu live cd, formating the partition and expanding it, no problems at all.But, I wanted my files back, so restored the system again, now the message that I get isQuote:
Gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline)
-Check rootdelay= (did the system wait for the right device?)
[code]....
View 9 Replies
View Related
Jan 23, 2010
Fresh install of 9.10. Update all. The update froze at the very end: configuring grub-pc. I let it run like that all night before settling for a reboot while the update manager was still running. (The update also raised the kernel version.) After reboot, I tried the newer kernel [2.6.31-17-generic] at the grub menu and got this error:
Quote:
udevadm trigger is not permitted while udev is unconfigured.
udevadm settle is not permitted while udev is unconfigured.
svgalib: Cannot open /dev/mem.[code].....
And, cat /proc/modules gives me a long list of modules (too much to retype for now).So my hard drive is there. maybe some errors on the / home partition [sda6] and I can get to the root directory.
FYI: MS-win XP still boots fine from grub.
View 1 Replies
View Related
Aug 7, 2010
I have 2 HDD one of 1 TB and other of 250 GB on my Desktop, on my 250 HDD I installed Windows 7 and have tried creating a Dual boot but my System boots to Windows without giving me Booting options to Windows or Ubuntu, if I manually select the booting option by hitting the F8 Key shows me list of H/w to boot from, I select the 250 GB HDD and system now boots to Ubuntu, both OS works fine no issues but the glitch is why do I have to do this everytime when booting to Ubuntu.
I also tried clean installing Ubuntu after having removed the Windows 7 but the same problem, cannot boot unless the HDD is selected.
At the time of installation I also noticed that Ubuntu will not detect the Windows OS which was already there before installing Ubuntu, whereas I tried with the same disc on different laptop computer and it worked just fine, it detected windows 7 loader and gives the booting option.
I just want to know is it because of 2 HDD installed on my Desktop.
View 3 Replies
View Related
Feb 9, 2010
On getting Debian for install, what's the main difference between the CD installation disk and the multi-DVDs?
View 6 Replies
View Related
Nov 16, 2010
I downloaded an raw SD card image that has two partitions. It caused some file system errors when I tried to dd it directly into an SD card. I am not sure if the card is defective or the image. Is there a way to examine this image without writing it to a physical card? Like trying to mount the partitions separately or checking the tables?
View 2 Replies
View Related
Mar 14, 2011
I have successfully set up a multi-seat configuration using 2 nvidia cards with 2 instances of X running at the same time. Thing is now, I can't access my external hard drive or any usb thumb drives I plug in. Normally when they would just open up after I plug them it, I get an error saying "unable to mount, Not Authorized". How I can regain access to this? I am using Linux Mint 10
View 6 Replies
View Related
Jan 30, 2010
I have a 2GB file which is a dd image of a block device. The block device (a USB-connected flash memory) contains multiple partitions, and therein lies the problem. I want/need to access the various partitions in the image file, but need to do this without actually using a physical flash memory device. If the image was that of a single partition, I could simply mount it on a loop device, and access the filesystem as necessary. However, I can find no kind of virtual block device upon which to write/mount the image.
I've searched the net exhaustively for anything that would seem to allow me to do what I need, but without even a sniff of success. Sadly, I have seen bits of information that suggest "you can't get there from here". Even the outstanding dd tutorial by AwesomeMachine on LQ didn't help. Anyone know of a kind of virtual block device on which a multi-partition image can be written and mounted? Or any other way I can access individual partitions (with various filesystem types on each) and then re-assemble them back to a single image?
View 2 Replies
View Related
Oct 13, 2010
Just tried installing Ubuntu 10.10 from a USB device on my Windows 7 machine but something goes wrong. Far into the installation the computer restarts, asks me which operating system I want to start (it had already done this once before) and I choose Ubuntu. Then I get three alternatives:
Ubuntu, Linux 2.6.35-22-generic
Ubuntu, Linux 2.6.35-22-generic (recovery mode)
Windows 7 (loader) (on /dev/sdb1)
I pick the top choice, and get the following message:
ALERT! /host/ubuntu/disks/root.disk does not exist. Dropping to a shell.
If I start recovery-mode i get the same message. There's some text above the message that reads "new low speed USB device using ohci_hcd and address"... Could there be a problem with the usb-drive? If I remove the USB drive I get the message: Gave up waiting for root device.
View 2 Replies
View Related
Dec 17, 2009
I'm trying to install a multi-disk (cd's) program and I've run into a snag. It's a windows program so I'm using Wine. The installer is asking for the second disk of a two disk set. However, the program won't release the drive so it won't open. I've searched a bit and discovered the command "eject" but it tells me I'm not root so I can't do that. I'm also worried about the consequences of typing a command I'm not familiar with (as root). I don't want to unmount the drive if that will disable it when I'm not confident I could remount it given my lack of expertise. I just want to eject the disk.
I tried the "straightened paper clip in the little hole on the drive" method. It didn't work. It knocks the drive out somehow and I had to cancel the installation to get it working again.
View 9 Replies
View Related
Mar 17, 2011
That is my disk
Code:
fdisk -l
Device Boot Start End Blocks Id System
/dev/sda1 1 3724 29912998+ 83 Linux
/dev/sda2 29256 30401 9205245 7 HPFS/NTFS
/dev/sda3 3725 4271 4393777+ 5 Extended
/dev/sda4 * 4272 12104 62918572+ 83 Linux
/dev/sda5 3725 4271 4393746 82 Linux swap / Solaris
I want ot install a new opensuse 11.4 as yest another OS. Due to the fact that I already have 4 sda partitions, I have to make some changes. What I am thinking about is to copy the sda2 (windows recovery) data to some folder etc (nevermind), then delete the sda2. Then I want to create a new primary partition for the new suse 11.4 and install it. What is worying me is the grub boot menu. I was planning to edit the new one (the opensuse 11.4), with old data.
Code:
###Don't change this comment - YaST2 identifier: Original name: linux###
title Desktop -- openSUSE 11.2 - 2.6.31.5-0.1
root (hd0,3)
kernel /boot/vmlinuz-2.6.31.5-0.1-desktop root=/dev/disk/by-id/ata-Hitachi_HTS542525K9SA00_080105BB0F00WDHE41DC-part4 resume=/dev/disk/by-id/ata-Hitachi_HTS542525K9SA00_080105$
initrd /boot/initrd-2.6.31.5-0.1-desktop .....
Now my question is will the settings of (hda0,n), change due to the fact that I have deleted the sda2? I have a lot of unused space at the end of my disk and want to create a new "sda2" there.
View 9 Replies
View Related
Aug 7, 2010
I am pretty new to Ubuntu and am practicing on an old desktop as a file print and domain controller for a work from home business while I build and configure a Linux server. My question is as follows: I have a laptop running windows 7, my wife has a MacPro running Snow Leopard, the kids have desk top running Ubuntu 10.04, I have a 500GB additional disk in the spare desktop which I want to use as a netork drive that will:
1) Win 7 backup location from the Laptop
2) Store backups of large photoshop files and other graphicsy type stuff from my wifes macpro.
3) Act as a shared directory for all of us
4) Store large multimedia files, mpegs etc
What is the best disk partition format - Am I restricted to NTFS due to the requirements to store Win 7 Backup files Secondly can anyone point me in the direction of a URL for getting the Samba permissions sorted for Windows 7, The kids PC dual boots Win XP and Ubuntu 10.04 Win XP is no problem to network but in Win 7 I can see all the shares in the network map but I always get permission errors both from the Ubuntu PC and Win 7 laptop. Most of the help files and manuals deal with 98/Me/XP and not windows vista / 7 that I can find.
View 3 Replies
View Related
May 15, 2010
Simple question, which implies lot of complexity, unfortunately : how to install Clonezilla and mount multi-partitions cloned image disk under DEBIAN ?
Wishing that one day Linux would be so easy and complete as Windows. But we are gaining more users, so Linux will have more apps
View 5 Replies
View Related