its openSUSE 11.2 I am already running sles10sp3, windows2k3, and winxp virtual machines, but when I try to install SLES11i586 I got following error message Error No kernel was found, The installation may have failed
[Code]...
I installed OpenSuSE 11.2 64bit from a Linux Magazine #111 dvd and now cannot create DomU guests. The exact error is in the subject line. It is sitting on a software RAID-1 partionion on two (mirrored) hard disks. When I first install - formatting all partitions - it reports error 17 and won't load the OS. After running the Repair installed system from the DVD I get the impression it is doing things twice rather than doing the repairs once on the RAIDed partition. Should I go back to 11.1?
View 4 Replies View RelatedI'm just installed OpenSuse 11.3 (64) on a 30gb SSD, hoping to get virtualbox 4.0 running to virtualize an instance of Windows 7.I went through some pain with my Nvidia video card and actually getting vb to install, but through lots of searching and tinkering got here.I created a vm in the vb control panel, but when I go to start it I get:
Code:
Failed to open a session for the virtual machine Win7Main.
The virtual machine 'Win7Main' has terminated unexpectedly during startup with exit code 1.
[code]....
I installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
I'm trying to install the 32bit 10.04 server to an atom machine from a CD burned with ubuntu-10.04-server-i386.iso. The installer is presenting me with the:"No kernel modules were found" ..error message. Is the atom cpu and chipsets supported by the 32bit server installer?
View 1 Replies View RelatedI am trying to install the Nvidia Quadro NVS 110 169.04 drivers but am having issues during install. Prior to attempting my install I did install the kernel-devel rpm so it can compile. after running the RPM I get. Quote: No precompiled kernel interface was found to match your kernel; would you like the installer to attempt to download a kernel interface for your kernel from the NVIDIA ftp site [URL]?
which of course does not work. next it says Quote: "No precompiled kernel interface was found to match your kernel; this means that the installer will need to compile a new kernel interface.. i hit okay and move on to. Quote: Error: Unable to find the kernel sources tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat linux systems, for example be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. if you know the correct kernel source files are installed, you may specify the kernel source path with the "--kernel-source-path' command line option
Subprocess failed. Error: RPM failed: installing package xen-4.0.0_21091_06-0.1.1.x86_64 needs 27MB on the /boot filesystemI seem not to be able to change the size of the /boot, but 11.2 loads okay but not 11.3There only 19MB left from 66 and I can't make it bigger, I hope there is someone thathas seen this. I would like to see some of the update with XEN.
View 1 Replies View RelatedI'm using openSUSE 11. I'hv tried to upgrade it to 11.1 with a x86_64 installation DVD (as I did earlier), but it failed. It showed the following message:
[Code]...
eventually same type of problem happend when I was trying with fedora 10... fedora 9 and openSUSE 11 install smoothly in my 64 bit machine (compaq SR1730IL, Intel pentium 4, 524 and 1GB DDR2 RAM)
Today i upgraded my system and started getting error when i update, install or remove a package. The error isn't restricted only to one repository so i thing something is wrong with my system.
[Code]....
I have installed suse 11.2. Sometimes while using (firefox, okular, open office etc) x server restarts & comes to login screen. While checking Xorg.0.log i found i810 module is failed to load. Is this causing the x server restart?
View 9 Replies View Relateduccessfully installing 11.3 M4 through GM on a test disk on my main machine, I upgraded the main disk on that machine with zypper dup from 11.2 to 11.3.As that went well, I decided to upgrade my netbook Asus EEE PC 901 from 11.1 tot 11.3 through zypper dup. While installation gave no errors, the system won't boot anymore, that is, grub loads and presents the boot menu, but doesn't find the kernel:
Code:
kernel (hd0,0)/boot/vmlinuz-2.6.34-12-pae root=/dev/diskby-id/ata-ASUS-PHISON_SSD_SOQ2780080-part1 spash=silent vga=315
[code].....
I have 2 Debian OS's and wanted to put Fedora next to it.
Install went ok, but after rebooting it says: "No root device found. Boot has failed, sleeping forever."
During install from the live CD I didn't "v" the boot (efi or something?) because I thought Grub would take care of everything.
Should I just reinstall again and choose the Fedora bootloader? Won't it mess up Grub?
I am trying to setup Slacware 13.1 x86_64 to a encrypted partition. I used the README_CRYPT.TXT howto : [URL] At the step when I create an initrd.gz I get this error: Quote: ERROR: No /lib/modules/2.6.33.4-smp kernel modules tree found for kernel "2.6.33.4-smp"
I tried to look into the directory and there was only modules under 2.6.44.3. So I tried to change the command into: Quote: mkinitrd -c -k 2.6.33.4 -m ext3 -f ext3 -r cryptroot -C /dev/sda2
This command was successful, but I don't know if this is alright. I made the changes in lilo.conf, add initrd = initrd.gz. This is all on unencrypted /boot partition. The boot=/dev/sda1 I also set for the unencrypted boot partition. When I boot the system I get a kernel panic:
[Code]....
I have a dual boot laptop with OpenSUSE and Ubuntu. The boot loader used is Ubuntus Grub that came with the Ubuntu installation.
I have done a zypper dup and upgraded to OpenSUSE 11.4. When I reboot my system I can no longer boot into OpenSUSE, Grub says something about a missing kernel.
I think I understand whats wrong here; the OpenSUSE entry in Grubs table hasn't been updated with the changes brought in by the zypper dup (new kernel i guess).
I'm I correct to assume this? How do I fix the problem? Booting into Ubuntu I tried to find /boot/grub/menu.lst to examine it by I cannot find it. I know Ubuntu use a newer version of Grub, does it have a different file layout?
When I try to run the Online Updates to the system through Yast I get the following errors for each package:
[QUOTE]
Subprocess failed. Error: RPM failed: warning: /var/cache/zypp/packages/Packman Repository/Multimedia/i586/libaudcore1-2.4.4-1.pm.1.1.i586.rpm: Header V3 DSA/SHA1 Signature, key ID 9a795806: NOKEY
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
[Code]...
I have a Dell Vostro v13 laptop that was shipped with 9.04. I upgraded to 9.10 and it told me it could not upgrade the kernel. The error message said something about a problem with the kernel file. I can still run the system and have not rebooted since the upgrade, but I need to be able to reboot eventually.
The System Monitor says:
Release 9.10 (karmic)
Kernel Linux 2.6.28-19-generic
Everything I have read says that 9.10 includes kernel 2.6.31. So I am afraid to reboot now.
Suddenly, after installing, boot was failed.
[Code]...
i was surprise, because in initrd-2.6.34.7-0.2-default all was ok.
I have installed OpenSUSE 11.3 64 bit and want to install VMWare workstation 7.1. I have run the install script for VMWare without any issues. When I start the VMWare Workstation I get a window saying this: Before you can run VMWare, several modules must be compiled and loaded into the running kernel. Kernel Headers 2.6.34-12-desktop Kernel headers for version 2.6.34-12-desktop were not found.
View 9 Replies View RelatedI would like to test 12.1 M5 on my real hardware, so I have special for this purpose two additional partitions (sda2 (to install milestone) and sda3 (to store installation ISO files)). I am running my stable 11.4 with Grub on sda1.
I do not like to burn DVDs just for short test of one milestone, so I was used to download DVD ISO, to unpack it to sda3 partition with all its files, then I changed Grub to boot install Linux from sda3. Installation complains there is no DVD or CD, then I chose to force installation from hard disk and select sda3 partition and select root directory "/". As I was used to from 11.4 this will start installation as it would be started from DVD.
But I think the problem has appeared since 12.1, where I get message: No repository found. (on sda3 / ), so the installation does not start.
I know this is not official way to install openSuse, but it worked before, and it was fast and easy for me, to install from hard disk.
After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
PATH:
Using: nvidia-installer ncurses user interface
ERROR:
When the RPM runs it come up with this error. How do I install the required dependencies? I have added more repositories, but still there are a few dependencies missing. Is there a zypper/sudo -get or something available? Opensuse 11.1 Gnome
[code]...
i try to install oci8 for php in suse 10 with this command :
$ cd/opt/oracle -> because the source in this folder
$ pear5 install oci8-1.4.1.tgz
and the result is :
/tmp/glibctestKR4FKZ:1:22: error:feature.h : No such file or directory
10 source files, building
running hpize
Configuring for :
bla...bla...bla
error: 'phpize' failed
what happen with this command? i can not found glibctestKR4FKZ folder in /tmp and 'phpize'.
I am trying to install from the iso image that a burned to cd, but while loading it comes up with an error. Eventually it says no repository found. I am not sure why this is happening.
View 5 Replies View RelatedI have updated opensuse 11.3 via yast and after reboot I got this errorerror: file not found.error: you need to load kernel first.Press any Key to continue.
View 9 Replies View Relatedcurrently I'm using a kernel from kernel-mainline [url], because thermal won't work satisfying with the shipped kernel from ubuntu and would like to install tp_smapi (including modules hdaps and thinkpad_ec), but the installation failed, because the system pretending, that kernel-headers missing.
Code:
Results in telling the system, that kernel-headers are installed.
Code:
But then the upcoming dialog-box of module-assistant telling me, that the kernel-headers are not installed and therefore installation of tp_smapi fails.
I was trying to update (from 11.0) to 11.3. Booting from DVD, selecting root (after "show all partitions", because none was offered at all), there is a message "No fstab found." and then "Failed to mount target system".fstab on target root is definitely readable and OK. (this is a dd copy from my current system, which is fine.). The target root fs is ext4 (seems ok, see y2log):
2010-08-31 03:34:00 <1> linux(2988) [YCP] Storage.ycp:5041 DetectFs:/dev/sda5
2010-08-31 03:34:00 <1> linux(2988) [YCP] Storage.ycp:5054 DetectFs ret `ext4
2010-08-31 03:34:00 <1> linux(2988) [YCP] FileSystems.ycp:1026 GetMountString used_fs:`ext4
[code]....
I managed to get following config up and running very nicely with an 11.3 installation. But recently I did a clean install of the OS and hoping to preserve my data in the home HD (2TB) partition I did the following operation which resulted in black screen screen with error 15: file not found.
Config: one SSD root (90GB) and swap (30Gb) second HD for home (2TB)
During the installation I reformatted and mounted the SSD with root and swap as above. I left the home HD (2TB) unformatted and mounted as home.
When I did my first boot up, it worked perfectly - Even Fire Fox booted up with my recovered pages as of my last install! However after installing my multi-media codecs, and security updates, etc. to the fresh install I rebooted the system only to discover that I am unable to get past GRUB!
I don't have to lose my data every time I do a fresh install to new ISO release.
So I installed this system with the net install disk. I really don't want to do that again. It said it needed one update shortly after install and I figured that a net install would pretty much be up to date and I would be fine to wait on that for a day or two. Wrong. I used bit torrent for about 20 hours and downloaded ~60 GB's to the external hard drive. After a while while clicked the little update button closed every thing else then hit apply.
Walk off, come back and the computer is completely non-responsive and the monitor is not getting a feed from the tower. Not even any num-lock blinky light action on the key board. I gave it a minute or two to show any kind of life then turned it off. It came back on well enough to get online and post this but, like the title indicates, that package manager appears to be broken in some way. In Debian based systems there is a command that clears this up. Is there an equivalent for this distro?
I attempted to finish the update but got this error:
Code:
installation of package failed.
Subprocess failed. Error: RPM failed: error: package NetworkManager-glib-0.8-7.4.i586 is not installed.
Why not just disable that update and see what happens? That's what I said; heres what happens:
Code:
Installation of package failed.
Subprocess failed. Error: RPM failed: error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index
error: db3 error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
error: error(-30987) getting "" records from Requireversion index .....
The above pertains to a fire fox update of some kind. I still have the install disk handy but would rather not wait the 3 hours it takes to download the packages. How I can fix this. I switched from Ubuntu to SUSE because it is supported by online learning soft ware I have access to.
I just installed opensuse 11.4 64 bit. Compiz and everything was working fine on my ati card (mobility 2600) with the default radeon drivers. I added the gnome 3 stable repo, updated fine. But when I rebooted I get booted into the fallback with no 3d effects and it says "gnome 3 failed to load" What gives? The drivers were working fine with full acceleration. I know gnome 3 works on this card, I tested it on the fedora live cd just fine.
View 5 Replies View RelatedI can't update anymore since a few days :
Download (curl) error for [URL]...
Error code: Connection failed
Error message: Failed to connect to 2a01:e0c:1:1598::1: Network is unreachable
I read somewhere that I should deactivate IPv6, which I did with no success. It seems to happen since I upgraded gnome following this link : Archive:GNOME 2.30 - openSUSE My Internet connection is of course alive and working.