Fedora Installation :: Black Screen In Preupgrade From 10 On Boot (anaconda)?
Sep 6, 2009
i did a preupgrade from fedora 10, i have a new line in grub with the "preupgrade to fedora 11" ... when i choose this.. anaconda run with the normal blue screen running anaconda... but a blacks screen apper with the mouse... the installation not follow and only the black screen with the mouse i can see...some line add to the kernel line of preupgrade fedora 11 to run with another graphical configuration
View 1 Replies
ADVERTISEMENT
Apr 3, 2009
I've some problems upgrading to version 10 from version 8. My workstation is certified by RedHat. It's a HP xw6600 with double processor Intel Xeon 5405 2.00 12M/133 QC and graphic card for dual screen Nvidia Quadro NVS 290 PCle. In my OS library I found version 8 to install. It has been installed successfully! However; I've read about advantages for workstation on version 10. Thus, I've downloaded Fedora ISO ver.10 and I've tried to install it in my WS. Here I found a problem: Just in the moment it try to start anaconda, the screen remain black. After three failed intents, I have tried to upgrade my version through the 'yum':
# yum -y update
# yum install preupgrade
# preupgrade
It ran perfectly till anaconda try to run again. Then, I've tried to upgrade to ver.9 from ver.8 and I getting the same problem. I've downloaded the Live CD and that is blocked as well. Of course, I've installed all drivers of my WS before upgrade but I get the same problem. So... How I can fix this problem?... I really need move to version 10. Ah!... I've tried to install beta version 11 but after one hour I get a error messages due at a bug
View 2 Replies
View Related
Apr 9, 2009
I'm trying to build a dual boot ubuntu 8.10 and fedora 10.I have ubuntu sucessfully installed. with a free partition ready for fedora.I cant seem to get fedora past the beginning of the install. Once it says its loading anaconda, my screen either goes blank, or the anaconda fails and the install exits, telling me to reboot my system.I have downloaded the DVD twice. once from the website, and i think when I bruned it it didn't burn right, I then downloaded it from torrent just to be safe and reburned at the slowest speed. It passes the media test.
I have been reading around it may be cause of my video card?My computer is the following.AMD Athlon +2400 XPXFX Nvidia Geforce 6800 GT or something close.80 gig hard drive1.5 gigs of DDR ram.MSI Motherboard not sure of model off top of my head.I really wanna get this dual boot working, As I feel fedora may have advantages over ubuntu. I was going to try to get ahold of another video card, and maybe try that. What do you think I should do
View 14 Replies
View Related
Jan 19, 2010
I cant boot fedora, i have installed windows XP and Fedora 12, i can boot XP, but when i try to boot Fedora, it show me boot screen to choose Fedora and Other, when i click enter on Fedora, nothing happens, just black screen :S I tried with "acpi=off", and it doesn't work :/
View 2 Replies
View Related
Jun 15, 2009
I'm trying to install F11 on a machine that was running well under F10 just a few hours ago. I made some changes to the disk configuration, involving the addition of a dmraid-controllable fakeRAID card (SiL 3124 I think) and creating a RAID 0 array out of the two drives connected to the motherboard itself (Intel ICH7R). Otherwise the machine's configuration is identical to the way it was when running F10. My problem is thus: when I boot from the installation DVD (64-bit), the boot process doesn't make it even to anaconda. Here is the error I get, right after md devices are autoconfigured:
[code]....
View 3 Replies
View Related
Mar 12, 2009
Tried the DVD install for 10. Install went fine other than it take for freakin ever, but after an 1 hour install, the update wanted to install 1675 or so updates. I let those updates install. 5 hours later the updates were done. Rebooted and now it freezes at a blank screen right after the 3 scrolling bars. System is older AMD 3000+, 1 GIG RAM with NVidia 5700 video card.
I did try and search some. But the only thing I could find was something about editing my grub file for a scan=sync setting (the information was basically gibberish to me. No clue what it was talking about or how I would edit a file on a system that won't boot). I tried to recover mode off the live CD. It had some options that said you could type Linux command line arguments, but whenever it got to the sysimage it says Linux isn't a command.
View 2 Replies
View Related
Nov 24, 2009
I installed F12 with the i686 KDE livecd. A black screen with a blink "-" appeared after the bios information on the first reboot. The computer does not respond to any key input except "ctrl+alt+del", which restarts the computer.The machine is a dell inspiron 6000 with inboard 915gm video card, and the bootloader was written to the harddrive mbr. Any help would be highly appreciated.I need to be more clear. Installation went fine, problem appeared on the first reboot.
View 9 Replies
View Related
Jun 1, 2010
When i boot the fedora image from a dvd i'm not being taken to the fedora live system screen, instead i see a bunch a words on a black screen (looks like DOS)...am i having compatibility issues or what? ive tried 32bit, 64bit versions as well as different desktops. does anyone have any ideas? my laptop is brand new: toshiba e205 running windows 7 ultimate..
View 2 Replies
View Related
Mar 15, 2009
I currently have a successful dual boot of XP and Fedora 10. I need to re-format my windows partition and re-install XP. When I use the windows CD, it asks to boot from cd. I hit any key and the screen goes black and stays there. XP is the primary OS (C, fedora is the secondary (D. Any thoughts? I still need Windows, because I am just learning Fedora.
View 2 Replies
View Related
Nov 7, 2009
I get past the count down. The bars run across the top. Then my lcd monitor announces it has no signal and goes to sleep. Had this problem with earlier versions of Ubuntu, particularly 8.04. Was fixed in 8.10.
get Fedora 11 up and running?
View 2 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Aug 9, 2011
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
View 5 Replies
View Related
Jun 10, 2009
I guess this is the right forum category for this. Am using the preupgrade method to go from F10 to F11.Downloading packages now. Just wondering if anybody knows if Anaconda will give me options to set up separate (ext3) partition for boot? (Since current grub won't work in the new ext4 file system scheme.)
View 2 Replies
View Related
Nov 17, 2009
It appears that the default boot partition is too small for F12 preupgrade:[URL].. Did anyone try to see if enough space is freed by following these steps? : http://fedoraproject.org/wiki/PreUpg...ace_in_.2Fboot
Namely,
1. Leave only 1 kernel
2. tune2fs -r 0 /dev/xxx
3. remove /boot/efi and splash.xpm.gz
"preupgrade now requires at least 167MB" means more space could be needed, and I'm unclear if the above is sufficient.
View 9 Replies
View Related
Oct 18, 2010
You probably know by heart the old tale of the guy who is preupgrading for as long as he can remember and eventually finds out /boot is too small for F13. Since removing old kernels didn't free enough space, I am now considering resizing /boot to 500MB. After reading stuff around the internet I have a rough idea of how to proceed (for instance, that I will need to install GRUB on the relocated /boot, etc. etc.), but since I do not want to run unnecessary risks I would like to ask you to do a sanity check on my plans. My HD is currently laid out like this:
/dev/sda1 : 128GiB, ntfs, contains a (broken) Windows installation and some other stuff.
/dev/sda2 : 131GiB, ntfs, holds the FLAC rips of my CDs and other important space-wasting stuff.
/dev/sda3 : 196 MiB, ext3, /boot of course.
[code]....
View 6 Replies
View Related
Nov 8, 2010
I'm trying to run preupgrade to upgrade to fedora 14 from fedora 12 and get a message saying there is not enough space in /boot/upgrade. I've found some instructions on how to make more room in the boot directory but I get an error near the last step as I have noted below:
Method 1: Free up space
First, try to remove any kernel packages not currently in use on your system. The kernel-prune.py script can be used to identify kernels that may be safely removed. If you choose to remove additional kernels, be prepared with installation media should you be unable to return to your previously installed system.
The installer will need approximately 26M of free space in /boot. Use the following command to determine the amount of free space in the /boot partition:
df -h /boot
To identify kernels that may be safely removed, run the following from a command line:
curl -O '[URL]'
chmod a+x kernel-prune.py
./kernel-prune.py
Now, to actually remove the kernel versions listed by the above command, run the following as root:
# PKGS=`./kernel-prune.py`
# echo $PKGS
# yum remove $PKGS
Next, adjust the number of reserved filesystem blocks using the command tune2fs. You'll first need to identify the block device for your /boot file system. In the example below, /dev/sda1 is the block device for the /boot filesystem.
# mount | grep "/boot"
/dev/sda1 on /boot type ext4 (rw)
I get this far and get the following Error:
[root@localhost ~]# mount | grep "/boot"
/dev/sda1 on /boot type ext3 (rw)
[root@localhost ~]# /dev/sda1 on /boot tupe ext3 (rw)
-bash: syntax error near unexpected token `('
[root@localhost ~]# mount | grep "/boot" /dev/sda1 on /boot/type ext3 (rw)
-bash: syntax error near unexpected token `('
[root@localhost ~]#
Now, adjust the number of reserved blocks for the /boot filesystem using the command tune2fs. Normally, a small amount of space on ext filesystem formatted partitions is 'reserved' and can only be used by the system administrator; this is to prevent an entirely full partition from rendering a system unbootable, and allow the administrator some space in which to work in order to clean up 'full' partitions. However, neither of this cases really applies to the /boot filesystem, so removing this reserved space is safe.
# tune2fs -r 0 /dev/sda1
View 1 Replies
View Related
May 27, 2011
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies
View Related
Sep 19, 2009
I was impressed to be asked on Fedora 10 if I want to upgrade to Fedora 11 but the first time I tried I had this error:
Not enough space in /boot/upgrade to download install.img.
My boot partition is 99MB and AFAIK that is not unusual so I tried tidying up a bit, uninstalling all except 2 kernels, and now have about 80MB for whatever needs to be downloaded in /boot/upgrade. But I get the same error. I can fix this by using wired instead of wireless networking but I want to know for planning purposes (next time I create a boot partition) how much space is required?
$ ls -l /boot/upgrade
total 21594
-rw-r--r-- 1 root root 18985802 2009-06-03 00:02 initrd.img
-rw-r--r-- 1 root root 3035056 2009-06-03 00:02 vmlinuz
Should I delete these? It looks like they might be left over from last time but I assume preupgrade knows what is junk and what isn't.
View 6 Replies
View Related
May 27, 2011
i have just upgraded from f14 to f15 using preupgrade. i am now still waiting for the first boot to finish. the screen is stuck for more than an hour and the last line written was:
Started LSB: Start up the OpenSSH server daemon. and there is a blinking cursor.
View 3 Replies
View Related
Jun 1, 2010
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
View 2 Replies
View Related
Feb 16, 2011
After installing Fedora 14 and being satisfied with the behaviour and the packages installed for it, i want to replicate the same installation in a few more PCs, so i installed Revisor to make with it an iso file that reflects my actual installation.
The problem is that if i run the software from Applications->System tools->Revisor, nothing happens after giving the user password.
Then i run it from a consele and this error is produced after giving my password: "Cannot find anaconda-runtime in /usr/lib/anaconda-runtime"
But anaconda is the environment used for installation, so it is installed from the very begining. Why this happens?
View 1 Replies
View Related
Apr 27, 2010
I've had Windows 7 installed for a few months now and would like to install Fedora 12 on a separate partition. I've tried this three times now, all of them ending with something wrong. The problem that exists for me now is that when I install Fedora 12 and boot up for the first time in GRUB, Fedora 12 works fine. ut when I boot into Windows 7 from GRUB, it just comes up with a black screen and says "BOOTMGR is missing; press ctrl + alt + del to restart" at the top. I don't believe that GRUB is booting into the wrong partition because I have no Windows recovery partition, just Windows 7. Also when I try and fix the Windows 7 partition with the system recovery disk, it says that the volume is corrupt every time. At this point I have everything backed up on a separate drive so I'm open to try installing Fedora 12 again even if it risks screwing up my Windows 7 partition, I would really just like to have a functioning dual boot.
View 2 Replies
View Related
Nov 4, 2010
When I am trying to install Fedora14_x64 It starts fine upto loading the anaconda.Then The screen goes blank.How to install Fedora14_x64 in my system.I am using Fedora12_x64 currently.
View 2 Replies
View Related
Jan 8, 2011
after a couple of years using Debian derivatives, I decided to try debian 5. Seemed to install okay. Installed Mint afterwards (as debian didnt boot) and debian is visible in the boot menu. Upon selection of debian, I just get a black screen and the monitor gives the message "input not supported". I havent had any such problems with numerous distros over the 2 years.
View 10 Replies
View Related
Jan 28, 2010
Last weekend, I upgraded my old PC and installed Ubuntu 9.10 on a brand new pc. It worked perfectly for 5 days. When I got home tonight, it wouldn't boot and got stuck on a black screen.
[Code]...
I really am a newby here but I think that the blkid command gives me my uuid. The uuid in the /dev/disk/by-uuid directory is in blue so I'm guessing that this is a symbolic link. And then, when I try to create a symbolic link with the ln command, it already exists... But the issue is that the UUID that is referenced in the error displayed is not the same as the UUID in my /dev/disk/by-uuid directory.
View 9 Replies
View Related
Oct 28, 2009
I downloaded a bunch of updates with PackageKit, afterwards I had to restart. Now when I did, all I would get is a blank screen, no blinking prompt line or anything. I did a cold boot and the same thing happened. So, I tried it a third time and all is fine. I'm running FC11 and I'm glad everything is back to normal,but what might have caused this in the first place?
View 5 Replies
View Related
Aug 22, 2014
I thought I'd breathe some new life into my aging PowerMac G5 desktop computer by installing debian. I burned the CD and ran the installer and everything installed okay, but when I went to boot it up for the first time, the screen blacked out after a few seconds of scrolling text and shows no signs of life after that. The computer just stops sending video to the monitor, and the only thing I can do is shut it down by holding down the power key.
View 13 Replies
View Related
Dec 28, 2014
I am a complete beginner to Linux (I understand a little bit of terminal from my OSX usage). I did a fresh install of Debian on an older Gateway laptop to try and make it usable for something. There is no other OS installed to this machine, I would like it to run Debian exclusively.
I used the UNetbootin application to install Debian from USB [URL] ..... Everything seemed to install just fine (no errors). However, upon 1st boot, I am presented with a black screen with a blinking white cursor. I cannot seem to get past this. I searched around and found this post: [URL] ... which seems identical except that their machine is a Mac. I had no luck using the REISUB reboot method. When I hold Alt+SysRq or Alt+PrtSc, it makes a lot of beeping noise. Issuing the REISUB keystrokes while holding does nothing.
View 14 Replies
View Related
Jan 4, 2010
I have an alienware m17 with an Ati graphics card. I was able to log on and install all current updates as well as the card driver update where I was then prompted to restart. Upon doing so, I get the grub loading plus splash screen. My screen then goes blank followed by a noise in my laptop. I have tried nomodeset as well as taking out splash nothing has worked. Also, upon booting up I get lucky if I can get into Recovery mode.
View 2 Replies
View Related
Aug 30, 2010
I have an Acer Aspire One that runs Windows XP. I downloaded both the full Ubuntu (latest version but can't remember the number) and the Ubuntu for netbooks- each on a separate flash drive. I thought I had the netbook version in my Acer when I booted it up, but I saw it was booting the full Ubuntu version. Instead of allowing it to finish installing to run from the flash drive, I stupidly shut it down and removed the flash drive. Ever since then, when I try to boot my Acer, all I get is the black screen of death. I've tried the flashit.exe to flash the BIOS, but no luck. So, I'm guessing it's not a BIOS issue.
View 1 Replies
View Related
