Fedora Installation :: 12 Hanging On Boot (most Times)?

Nov 26, 2009

I have just installed Fedora12 x86 64. On booting more often than not it hangs just before completing the login screen.I will try some of the options in the wiki. In the mean time has anyone else experienced this and resolved it.The odd thing is although the keyboard is not on, (num lock light goes out as boot starts and only comes back on if it has fully booted), the mouse will move around the screen but the click has no effect.Note the same behaviour was shown on the x86 64 live cd which I needed to install to enable me to create a bootable usb stick from the x86 64 DVD.

View 4 Replies


ADVERTISEMENT

Fedora Installation :: F13 Is Hanging On Boot

Jun 11, 2010

I've been having trouble with my desktop ever since I upgraded from F 11 to F 13 last night. Finally, however, I got the proper version of the nVidia drivers installed. However, it's stopped completing boot. I've edited grub at boot to get it to show the boot messages and find that the last thing it reports is success in registering the binary for Windows applications. After that, it just sits there, doing nothing. I can go to an alternate console an d log in, but that's all.

If I log in and run startx, it fails.It reports that it was unable to load the nvidia module and "no screens found." Does anybody know what I should do next?I've removed both kmod-nvidia and akmod and am going strictly with the nouveau drivers.I've booted, used Ctrl-Alt-F2 to get a console, logged in as root and run the setup program to configure X to run that way, then returned to the main console and logged in as myself. Shortly after my wallpaper shows up, and long before I have a working desktop, it goes white and stays that way. Aside from getting a different video card (The old one worked Just Fine right up until I upgraded.) what else can I do?

View 11 Replies View Related

Debian Configuration :: Udev Times Out Resulting In 3 Min Boot Times

Jan 21, 2016

My systemd-udev-settle.service is failing for some reason.

systemctl status systemd-udev-settle.service -a output
Code: Select all● systemd-udev-settle.service - udev Wait for Complete Device Initialization
   Loaded: loaded (/lib/systemd/system/systemd-udev-settle.service; static)
   
[ode]...

Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.

View 6 Replies View Related

Ubuntu Installation :: Freezing, Hanging, Blackouts And Being Unable To Boot With 10.4?

Jul 12, 2010

I am having problems with freezing, hanging, blackouts and being unable to boot with 10.4. After having replaced the hard drive 3 times, and after reading much about these problems, have decided to regress to 9.10. How do I do it? I am weary of cleaning my hard disk to download 9.10 in case it freezes in the middle of the process.

View 1 Replies View Related

Fedora Installation :: 10 Installer Hanging On Keyboard Slection?

Feb 23, 2009

I am trying to install Fedora Core 10 64bit on my Desktop... i've been running FC7 on it until now.The installer continues until the Anaconda GUI, and I am able to click next on language select, then when I click to select "U. S. English" as the keyboard layout and press NEXT, the installer hangs. I ran the disk verification at the start and it passed, so can't be a corrupted installation disk.I can move to the other terminals away from the Anaconda GUI Installer, and in one

Code:
INFO: moving (1) to step welcome
INFO: moving (1) to step language

[code]....

View 5 Replies View Related

Fedora Installation :: Log In 7 Times ?

Sep 16, 2009

what's happened. I now have to log-in 7 times (at least) before I can finally get in to fedora 11. It only started happening at the week-end after a patch was installed. what's going on?

View 5 Replies View Related

Debian Installation :: Boot Back Into Debian Hanging Up

Jul 11, 2011

I'm not sure if this is the right spot for this pst or not, first on this forum. I just removed Fedora Core 4 from my system and installed Debian Sarge with the 2.6 kernel. I'm a newbie. The install seemed to go fine, after it was done I actually logged in and looked around some. I then restarted to check to make sure that my boot process went ok and I could still get to windows. Worked fine. Then I tried to boot back into Debian. It hung. I rebooted and tried again. Hung again in the same spot.

View 1 Replies View Related

Fedora Installation :: F12 DVD Has Error - Tried Burning And Downloading Several Times

Nov 21, 2009

I've downloaded the DVD version of Fedora 12 with a torrent so it shouldn't be corruped - checked the hash anyway and it wasn't - and I burnt it at a low speed and has my burning program verify that it did indeed burn what it was supposed to. I tested the disc for errors and every time it shows up that around the 70% mark that the DVD has an error.

View 3 Replies View Related

Fedora Installation :: Crashed For No Apparent Reason Several Times?

Jul 1, 2011

I have just installed (after a series of crashes during the install) Fedora 15. I also have Ubuntu Natty installed and use it primarily but I wanted to reach out and try new distros.I've wanted to try Fedora and finally got enough nerve to try. Installing it crashed for no apparent reason several times.ehow it installed and booted right to Fedora.However, when finally figuring out how to run the updates, I began to have the same problem.(Someone elsewhere suggested trying to update through command line--which I did finally though I had a few crashes doing this).

Now I am logging in and then it will just inadvertently crash. I could be in firefox, or using terminal, etc. There doesn't seem to be much rhyme or reason to why this is happening and I feel frustrated. I really want to test out Fedora (it looks so nice!) but can't manage to stay afloat more than a few minutes. I might also mention that this does not happen in Ubuntu at all so I can't account for the issues. I have much to learn but I feel a bit intimidated by Fedora because it's so new to me.

View 5 Replies View Related

Ubuntu :: Hanging On Boot From Usb?

Jul 23, 2010

I'm trying to boot to install ubuntu 10.04 via a USB, and it keeps hanging on:

pciehp : PCI Express Hot Plug Controller Driver version : 0.4

and it sits there for a long time, and nothing happens..

This is an HP Pavilion dv5000 laptop with a 120 gb IDE hard drive, 2gb of ram, if you need any more info lmk, but I can't boot into windows.

View 2 Replies View Related

Fedora Installation :: Installed F On Ati Radeon HD 5145 - Setup Just Hangs Up Some Times

Jun 14, 2010

I have an urgent major problem. I tried to install F8, F9, F10, F11 and F13 live but all gave the same problem, which is I can't install the OS.the problem is Fedora can't communicate with ATI Radeon HD 5145.....the setup just hangs up some times hangs when it tries to run anaconda....

Now F10 X86_64 was installed normally, but after the first reboot.. it gone crazy...and started to display rubbish...going to init 1 and trying to run the GUI I got error server X.

Also ubuntu didn;t work too

My laptop is
Toshiba Satellite L650-10M
Intel CoreTM i3-330M Processor (2.13GHz , FSB:1066MHz , 3MB 2nd Level Cache)
Memory 2,048 MB DDr3 RAM (1066MHz) System Memory
320GB Hard Disk sata
ATI mobility Radeon HD 5145 , 512MB dedicated Up To 2,810MB Graphics
Wireless technologies 802.11 a/B/G integrated Wi-FiTM ;Bluetooth

View 1 Replies View Related

OpenSUSE Install :: LiveUSB Hanging At Boot?

Nov 26, 2010

I have been trying and failing to install openSUSE 11.3 for the last couple of days to replace my Ubuntu install.

I have downloaded the openSUSE-11.3-GNOME-LiveCD-i686.iso (have downloaded numerous times in case it was a problem with the mirror I used) and done the standard dd stuff, as well as trying it from my windows partition with the ImageWriter app.

When I try and boot with the USB drive plugged in my system hangs at the boot screen and the usb drive starts flashing as if it is being read, this continues indefinitely and never goes beyond the boot screen and i eventually take the usb drive out and restart.

When plugging the drive in when Im in ubuntu it shows up as "openSUSE Live CD GNOME" and all the files seem to be there. In gparted it doesn't recognise the partitions or anything but I presume this is normal... Also reduces the size of my drive to the size of the Live CD but again I presume this is normal...

I have also tried installing using the NET iso however I have exactly the same outcome.

This laptop is a Acer Travelmate 8371 and has had Ubuntu, Mint, and Windows 7 all installed from the same USB drive. There is not optical drive so I have no other ways to install openSUSE.

View 3 Replies View Related

Ubuntu :: System Hanging On The Grub2 Boot Up?

Mar 1, 2010

I've read the various Grub2 posts and even the guide, but unfortunately for me I can't seem to come up with an answer to my problem. I installed Ubuntu 9.10 on a new hard drive on a friends laptop, but I have problems with the system hanging on the Grub2 bootup.I'll post the screen

recordfail=1
if [ -n ${have_grubenv} ]; then save-env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,1)
search --no floppy --fs-uuid --set ac1b1d46-bac1-4140--953e-70a8a61be8b0
linux /boot/vmlinuz-2.6.31-14-generic root=UUI=ac1b1d46-bac1-4140-953e-70a8a61be8b0 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic

If I hold down the left shift and then press E to edit and remove the search --no floppy line entirely then press ctrl-x the system boots just fine. I then opened up a terminal and did sudo update-grub to try that but it didn't fix it. Is this a problem in my bios looking for a floppy, I tried with the boot from floppy enabled and disabled (but always as the 3rd boot option) the floppy is not installed. Is there anyway to edit the file and save it so it will boot up? I was trying to research that and could not come up with it.

View 8 Replies View Related

Ubuntu Servers :: Server Is Now Hanging On Boot?

Jun 7, 2011

After a powercut in the middle of the night (UPS battery also ran out before power came back) my server is now hanging on boot.This is where it gets, and it just hangs indefinitely:

View 2 Replies View Related

Hardware :: Boot Hanging On HP PC W/ Ubuntu Unless Press Key?

Mar 5, 2011

I'm running Ubuntu 10.10-i386 on my HP a6242n PC and whenever I restart or turn it on from shutdown the computer lights up but nothing shows on my screen until I press a key, and when it does start up it's just starting the boot

View 9 Replies View Related

Ubuntu :: New User - Updates Installed - Hanging Boot

Dec 29, 2010

I've got 10.4.1(rev190?) installed in what I guess is Wubi and have been running dual boot for a couple of weeks now. My other OS is XP. I recently ran the updater then shut the computer down for a week. I can't remember now if I had to restart to complete any updates or not but my laptop battery is fried so once I unplugged it after it completed shutdown all power was removed from the system for 9 days. Today I tried to boot Ubuntu and after I chose it from the boot menu it flashed some sort of message about WUBILDR really quick (I wasn't able to read it all) then went through its normal boot until the Ubuntu splash screen where one dot went red and the system hung.

I allowed it a good 15 minutes to see if it would unhang but no dice. It boots fine on XP. Any advice? I'm reading the Wubi Megathread right now but as I'm new to Ubuntu I figured I'd check to see if anyone else experienced these particular problems here, too. Right now I'm going to download the Ubuntu installer to a disk to try some of the Megathread troubleshooting.

View 2 Replies View Related

Ubuntu :: Boot Hanging At Checking Battery State

Jan 16, 2011

Today when I went to boot up my computer, it hung at "Checking battery state...". I have never had any problems before this, and have been using 10.10 for several months. The only change I made that I can think of was installing the Wacom Control Panel. I have no idea what to do, and really, really don't want to reinstall Ubuntu unless there's no other option.

View 4 Replies View Related

OpenSUSE Install :: 11.1 - Boot Hanging On Starting Jexec Services

Jul 2, 2010

New Intel x64 system installed with Opensuse 11.1 (like the KDE 3.5 option) and has been running well until today. Booting stops at "starting jexec services". Even while booting under "failsafe" system halts at "starting jexec services". Unable to boot to command prompt to attempt repair. Ran "repair" option from install disc with no good results. Still will not boot past jexec services.

View 2 Replies View Related

OpenSUSE Install :: 11.3 - Delay / Hanging Of 3 Minutes During Boot Process

Aug 4, 2010

Every time I boot up OpenSUSE 11.3 it hangs at the same "position" for approximately 3 minutes and then continues to boot. Unfortunately I see no corresponding error log e.g. in dmesg output. Hence, I don't know what is the reason for that. Here is my dmesg output. The delay occurs at 20 seconds after beginning of boot process (line 1085). I also analyzed the boot process with bootchart.
My computer: Notebook Lenovo ThinkPad R400.

View 9 Replies View Related

Ubuntu :: Upgrade Hanging Up The System - How To Get Old Style Boot Up Screen

Feb 15, 2011

I just recently installed updates from Ubuntu and the system is hosed. I get the Ubuntu screen that flashes real quick then it goes to the Nvidia like cursor. I am pretty sure something is hanging up on startup. I cannot get to a console, cannot do anything but reboot with ctrl alt del. Then I get the briefest flash of the screen but not long enough to see where it was hanging up at. I ran the same updates on this machine, if I could get the old school informitive startup screen instead of the windows like tell you nothing start up screen I might at least know where to start looking. Right now I have zero clue as to what the updates broke. I cannot even get to log files as there's no console, no ssh, nothing. version is Ubunto 10.4 LTS.

View 4 Replies View Related

Ubuntu :: How To Decrease 10.04 Boot Times

Aug 9, 2010

There seems to be quite a craze about reducing the Ubuntu boot times to 10 seconds. I never really reached the 10 second mark.. for me it was more like 30 seconds from when I selected Ubuntu in GRUB to when I was prompted to type in the password in GDM. First of all, is this what is meant by boot time? Secondly, I know this already is quite a good 'boot' time, but just for the sake of tinkering around, is it possible to reduce the time that elapses between the GRUB menu and GDM?

View 8 Replies View Related

Ubuntu :: Slow Boot Times From 9.10 To 10.10?

Oct 23, 2010

I'm running 10.10 on an IBM Thinkpad R60 with 3GB RAM. I did a clean install of 9.10 and 10.04, and recently upgraded to 10.10. With all three, I'm noticing mething rather strange; after passing the PC's BIOS screen, I get a flashing cursor for about 20-30 seconds before Ubuntu starts booting. When I did the clean installs, I completely erased the hard drive, so I'm not sure what's causing it. The hard drive activity light is on when this happens, as well. It's very strange, as I have an old Dell Dimension 4550 with a slower hard drive and less RAM than the Thinkpad...yet it boots up faster, with no flashing cursor.

View 9 Replies View Related

Ubuntu :: 3-minute Boot Times On 10.10?

Apr 25, 2011

My 64-bit Kubuntu has a rather long boot time, anyone else had 3 mins plus

View 2 Replies View Related

Ubuntu Installation :: Hanging After First Reboot?

Sep 20, 2010

There's a strange problem, after installing ubuntu 10.04.1 using wubi.

The installation goes fine in Windows, unpacks to an empty 15gb ntfs partition. After restarting to complete the installation, it would'n find the grldr but fixed that by copying over the wubi* files installed in C:.

Now the problem, the boot screen shows for a few seconds, switches to the default ubuntu wallpaper, the mouse cursor is there and working, and that's it. The installation doesn't continue, the keyboard won't work; Also I've tried all the additional options the installation offers when it asks to press Esc.

The system:
Wubi installed size: 15gb
32bit Ubuntu 10.04.1
4gb installed ram
nVidia 9800gx2

Using ubuntu for a month on my netbook determined me to add it to my desktop so I hope this gets fixed

View 7 Replies View Related

General :: After Installation Of Ubuntu 9.10 PC Keeps Hanging

Dec 16, 2010

a few weeks ago i installed Ubuntu 9.10 on my PC on which i was previously using Ubuntu 8.10. However after the installation of the new version, my machine keeps hanging all the time,like i can use it for 20 minutes and it hangs and completely freezes, so i have to force a shutdown in order to restart and it does so very often, i don't know where the problem really is. The PC is Pentium 4, 40GB hard disk, 512MB RAM, processor speed of 1.8 GHz.

View 7 Replies View Related

Ubuntu :: Most Times After Boot Up The Display Is Black?

Nov 8, 2010

This little guide is for anyone with an HP Touchsmart Tm2 series running Ubuntu 10.04 and above. PLEASE NOTE: These workarounds, solutions, and tips have been tested and verified to work on an HP Touchsmart Tm2-2050us running Ubuntu 10.04 Lucid Lynx and Ubuntu 10.10 Maverick Meerkat. Installation: There are no problems I have experienced with installation except for the display not working on the live USB/CD images occasionally, this can be fixed by simply closing the display lid, and reopening it (this usually has to be done at least 2 or 3 times). Display: Most times after boot up, the display is black. A workaround for this is closing the lid and reopening it (repeat until the display works). Another reported solution is as follows:

1) Open a terminal
2) Type:

Code:
sudo nano /etc/rc.local 3) Add this to the bottom of the file (this disables the ATI part of the hybrid graphics card):
Code:
echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
4) Press CTRL-X (to exit), Y (to save changes), and ENTER/RETURN to accept the file name.
5) Reboot
Note: This solution is also reported to increase battery life.

Trackpad: It may seem that the right click button is disabled, but it isn't. To right click, you must tap the very bottom right corner of the trackpad. Also, by default the trackpad does not have multi-touch enabled (even though it is capable of it). A reported solution for this is:

1) Open a terminal
2) Type:

Code:
sudo nano /etc/X11/xorg.conf.d/50-two-finger-scroll-touchsmart-tm2.conf
3) Add this to the bottom of the file:
Code:
Section "InputClass"
Identifier "enable synaptics SHMConfig"
MatchIsTouchpad "on"

[Code]...

View 8 Replies View Related

Ubuntu Installation :: 10.04 Hanging At Purple Screen?

May 5, 2010

My problem is with the new Ubuntu 10.04 Installer, and the Plymouth Bootloader.

I have installed Ubuntu plenty of times before on my hardware setup, so 10.04 shouldn't be significantly different, however I can't seem to get it to go past the purple screen with the red dots.

If i let it sit there for a while, then press an arrow key, it takes me to the text which is as follows:

Code:
(process:404) : GLib-WARNING **: getpwuid_r(): failed due to unknown user(0)
unable to open '/dev/mapper/nvidia_afgjfcea'
unable to open '/dev/sda'
unable to open '/dev/sdb'

[Code]....

View 9 Replies View Related

OpenSUSE Install :: OS 11.2 Hangs At Boot Several Times In Aspire One?

Dec 1, 2009

I don't know why, but when i first boot openSUSE at the morning in my Aspire it hangs over and over again. I don't know why is this, but the gecko appear, the white bar appear, and moves 1cm, and then, puff no more blinking from the hard drive. Then i force te reboot, over and over until works.The message is: acerhdf: no Aspire One hardware foundWhen i first installed the mini with openSUSE it works perfect for a week, and then start this problem.I have tried with different kernel flavors (like desktop) and still nothing.

View 9 Replies View Related

Ubuntu :: Second HDD Improve Boot Time And Access Times ?

Jun 26, 2010

I managed to install a second hand 10Gb HDD on my old P4. I want to see how I can use this extra disk to speed up Ubuntu 10.04 if possible.

I installed my swap onto this second drive but since I never use swap I can't see any real improvement. Next, I'm considering the creation of a new partition on that disk that would handle /tmp. Could that improve access times?

Finally, what other tricks could I use with this 2nd HDD to speed things up?

View 6 Replies View Related

Ubuntu Servers :: Extraordinarily Fast Boot Times In VM?

Nov 1, 2010

At work, we use two very powerful servers to host a series of VMs to do some heavy-lifting analytical work. Part of my job has been to evaluate a variety of different virtualization environments, including changing the host OS (or dom0 kernel for Xen), changing the platform (KVM, Xen, ESXI, etc.), and changing the guest OS types.

I noticed a number of behaviors that Ubuntu exhibited that set it apart (almost always in a positive way) from the other OSes. Most astounding though was that when an Ubuntu 10.04 AMD64 server VM was booted from an Ubuntu 10.04 AMD64 server host (that is, same version of Host OS and Guest OS) in KVM, the guest boots in roughly 2 seconds. At least, the guest boots faster than the VNC connection can initialize.

I'm certainly not complaining, but I can't for the life of me figure out how this could be possible. I understand that the Upstart init daemon is very good about startup times.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved