Fedora Installation :: F13 Is Hanging On Boot
Jun 11, 2010
I've been having trouble with my desktop ever since I upgraded from F 11 to F 13 last night. Finally, however, I got the proper version of the nVidia drivers installed. However, it's stopped completing boot. I've edited grub at boot to get it to show the boot messages and find that the last thing it reports is success in registering the binary for Windows applications. After that, it just sits there, doing nothing. I can go to an alternate console an d log in, but that's all.
If I log in and run startx, it fails.It reports that it was unable to load the nvidia module and "no screens found." Does anybody know what I should do next?I've removed both kmod-nvidia and akmod and am going strictly with the nouveau drivers.I've booted, used Ctrl-Alt-F2 to get a console, logged in as root and run the setup program to configure X to run that way, then returned to the main console and logged in as myself. Shortly after my wallpaper shows up, and long before I have a working desktop, it goes white and stays that way. Aside from getting a different video card (The old one worked Just Fine right up until I upgraded.) what else can I do?
View 11 Replies
ADVERTISEMENT
Nov 26, 2009
I have just installed Fedora12 x86 64. On booting more often than not it hangs just before completing the login screen.I will try some of the options in the wiki. In the mean time has anyone else experienced this and resolved it.The odd thing is although the keyboard is not on, (num lock light goes out as boot starts and only comes back on if it has fully booted), the mouse will move around the screen but the click has no effect.Note the same behaviour was shown on the x86 64 live cd which I needed to install to enable me to create a bootable usb stick from the x86 64 DVD.
View 4 Replies
View Related
Jul 12, 2010
I am having problems with freezing, hanging, blackouts and being unable to boot with 10.4. After having replaced the hard drive 3 times, and after reading much about these problems, have decided to regress to 9.10. How do I do it? I am weary of cleaning my hard disk to download 9.10 in case it freezes in the middle of the process.
View 1 Replies
View Related
Feb 23, 2009
I am trying to install Fedora Core 10 64bit on my Desktop... i've been running FC7 on it until now.The installer continues until the Anaconda GUI, and I am able to click next on language select, then when I click to select "U. S. English" as the keyboard layout and press NEXT, the installer hangs. I ran the disk verification at the start and it passed, so can't be a corrupted installation disk.I can move to the other terminals away from the Anaconda GUI Installer, and in one
Code:
INFO: moving (1) to step welcome
INFO: moving (1) to step language
[code]....
View 5 Replies
View Related
Jul 11, 2011
I'm not sure if this is the right spot for this pst or not, first on this forum. I just removed Fedora Core 4 from my system and installed Debian Sarge with the 2.6 kernel. I'm a newbie. The install seemed to go fine, after it was done I actually logged in and looked around some. I then restarted to check to make sure that my boot process went ok and I could still get to windows. Worked fine. Then I tried to boot back into Debian. It hung. I rebooted and tried again. Hung again in the same spot.
View 1 Replies
View Related
Jul 23, 2010
I'm trying to boot to install ubuntu 10.04 via a USB, and it keeps hanging on:
pciehp : PCI Express Hot Plug Controller Driver version : 0.4
and it sits there for a long time, and nothing happens..
This is an HP Pavilion dv5000 laptop with a 120 gb IDE hard drive, 2gb of ram, if you need any more info lmk, but I can't boot into windows.
View 2 Replies
View Related
Nov 26, 2010
I have been trying and failing to install openSUSE 11.3 for the last couple of days to replace my Ubuntu install.
I have downloaded the openSUSE-11.3-GNOME-LiveCD-i686.iso (have downloaded numerous times in case it was a problem with the mirror I used) and done the standard dd stuff, as well as trying it from my windows partition with the ImageWriter app.
When I try and boot with the USB drive plugged in my system hangs at the boot screen and the usb drive starts flashing as if it is being read, this continues indefinitely and never goes beyond the boot screen and i eventually take the usb drive out and restart.
When plugging the drive in when Im in ubuntu it shows up as "openSUSE Live CD GNOME" and all the files seem to be there. In gparted it doesn't recognise the partitions or anything but I presume this is normal... Also reduces the size of my drive to the size of the Live CD but again I presume this is normal...
I have also tried installing using the NET iso however I have exactly the same outcome.
This laptop is a Acer Travelmate 8371 and has had Ubuntu, Mint, and Windows 7 all installed from the same USB drive. There is not optical drive so I have no other ways to install openSUSE.
View 3 Replies
View Related
Mar 1, 2010
I've read the various Grub2 posts and even the guide, but unfortunately for me I can't seem to come up with an answer to my problem. I installed Ubuntu 9.10 on a new hard drive on a friends laptop, but I have problems with the system hanging on the Grub2 bootup.I'll post the screen
recordfail=1
if [ -n ${have_grubenv} ]; then save-env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,1)
search --no floppy --fs-uuid --set ac1b1d46-bac1-4140--953e-70a8a61be8b0
linux /boot/vmlinuz-2.6.31-14-generic root=UUI=ac1b1d46-bac1-4140-953e-70a8a61be8b0 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
If I hold down the left shift and then press E to edit and remove the search --no floppy line entirely then press ctrl-x the system boots just fine. I then opened up a terminal and did sudo update-grub to try that but it didn't fix it. Is this a problem in my bios looking for a floppy, I tried with the boot from floppy enabled and disabled (but always as the 3rd boot option) the floppy is not installed. Is there anyway to edit the file and save it so it will boot up? I was trying to research that and could not come up with it.
View 8 Replies
View Related
Jun 7, 2011
After a powercut in the middle of the night (UPS battery also ran out before power came back) my server is now hanging on boot.This is where it gets, and it just hangs indefinitely:
View 2 Replies
View Related
Mar 5, 2011
I'm running Ubuntu 10.10-i386 on my HP a6242n PC and whenever I restart or turn it on from shutdown the computer lights up but nothing shows on my screen until I press a key, and when it does start up it's just starting the boot
View 9 Replies
View Related
Dec 29, 2010
I've got 10.4.1(rev190?) installed in what I guess is Wubi and have been running dual boot for a couple of weeks now. My other OS is XP. I recently ran the updater then shut the computer down for a week. I can't remember now if I had to restart to complete any updates or not but my laptop battery is fried so once I unplugged it after it completed shutdown all power was removed from the system for 9 days. Today I tried to boot Ubuntu and after I chose it from the boot menu it flashed some sort of message about WUBILDR really quick (I wasn't able to read it all) then went through its normal boot until the Ubuntu splash screen where one dot went red and the system hung.
I allowed it a good 15 minutes to see if it would unhang but no dice. It boots fine on XP. Any advice? I'm reading the Wubi Megathread right now but as I'm new to Ubuntu I figured I'd check to see if anyone else experienced these particular problems here, too. Right now I'm going to download the Ubuntu installer to a disk to try some of the Megathread troubleshooting.
View 2 Replies
View Related
Jan 16, 2011
Today when I went to boot up my computer, it hung at "Checking battery state...". I have never had any problems before this, and have been using 10.10 for several months. The only change I made that I can think of was installing the Wacom Control Panel. I have no idea what to do, and really, really don't want to reinstall Ubuntu unless there's no other option.
View 4 Replies
View Related
Jul 2, 2010
New Intel x64 system installed with Opensuse 11.1 (like the KDE 3.5 option) and has been running well until today. Booting stops at "starting jexec services". Even while booting under "failsafe" system halts at "starting jexec services". Unable to boot to command prompt to attempt repair. Ran "repair" option from install disc with no good results. Still will not boot past jexec services.
View 2 Replies
View Related
Aug 4, 2010
Every time I boot up OpenSUSE 11.3 it hangs at the same "position" for approximately 3 minutes and then continues to boot. Unfortunately I see no corresponding error log e.g. in dmesg output. Hence, I don't know what is the reason for that. Here is my dmesg output. The delay occurs at 20 seconds after beginning of boot process (line 1085). I also analyzed the boot process with bootchart.
My computer: Notebook Lenovo ThinkPad R400.
View 9 Replies
View Related
Feb 15, 2011
I just recently installed updates from Ubuntu and the system is hosed. I get the Ubuntu screen that flashes real quick then it goes to the Nvidia like cursor. I am pretty sure something is hanging up on startup. I cannot get to a console, cannot do anything but reboot with ctrl alt del. Then I get the briefest flash of the screen but not long enough to see where it was hanging up at. I ran the same updates on this machine, if I could get the old school informitive startup screen instead of the windows like tell you nothing start up screen I might at least know where to start looking. Right now I have zero clue as to what the updates broke. I cannot even get to log files as there's no console, no ssh, nothing. version is Ubunto 10.4 LTS.
View 4 Replies
View Related
Sep 20, 2010
There's a strange problem, after installing ubuntu 10.04.1 using wubi.
The installation goes fine in Windows, unpacks to an empty 15gb ntfs partition. After restarting to complete the installation, it would'n find the grldr but fixed that by copying over the wubi* files installed in C:.
Now the problem, the boot screen shows for a few seconds, switches to the default ubuntu wallpaper, the mouse cursor is there and working, and that's it. The installation doesn't continue, the keyboard won't work; Also I've tried all the additional options the installation offers when it asks to press Esc.
The system:
Wubi installed size: 15gb
32bit Ubuntu 10.04.1
4gb installed ram
nVidia 9800gx2
Using ubuntu for a month on my netbook determined me to add it to my desktop so I hope this gets fixed
View 7 Replies
View Related
Dec 16, 2010
a few weeks ago i installed Ubuntu 9.10 on my PC on which i was previously using Ubuntu 8.10. However after the installation of the new version, my machine keeps hanging all the time,like i can use it for 20 minutes and it hangs and completely freezes, so i have to force a shutdown in order to restart and it does so very often, i don't know where the problem really is. The PC is Pentium 4, 40GB hard disk, 512MB RAM, processor speed of 1.8 GHz.
View 7 Replies
View Related
May 5, 2010
My problem is with the new Ubuntu 10.04 Installer, and the Plymouth Bootloader.
I have installed Ubuntu plenty of times before on my hardware setup, so 10.04 shouldn't be significantly different, however I can't seem to get it to go past the purple screen with the red dots.
If i let it sit there for a while, then press an arrow key, it takes me to the text which is as follows:
Code:
(process:404) : GLib-WARNING **: getpwuid_r(): failed due to unknown user(0)
unable to open '/dev/mapper/nvidia_afgjfcea'
unable to open '/dev/sda'
unable to open '/dev/sdb'
[Code]....
View 9 Replies
View Related
Sep 24, 2009
I am working on Fedora core 4 with kernel verion 2.6.11.. I am running a Manager process which spawns child process. If a child process exits , the SIGCHLD signal is processed in parent process and it is forked again. When the parent process receives a SIGTERM signal it first tries to kill the child process using SIGTERM signal . if the child process dosen't get stopped then kill it using SIGKILL. Now,the Parent process sometimes gets hanged and the strace shows :
futex(0x98535e0, FUTEX_WAIT, 2, NULL <unfinished ...>
View 1 Replies
View Related
Mar 14, 2010
My Fedora setup is working great so far, and I don't really have any complaints. I installed it on a portable hard drive, connected over USB. Thing is, I installed my system with the LiveCD, and I wanted to download the full DVD for a friend because of his needs for his system. When I try to download the full DVD (whether over Firefox or Transmission), the system hangs by suddenly showing a screen with the Fedora logo in the middle and a light blue background, the same as in boot up. Also, my caps lock blinks in a consistent fashion like a metronome. The same happens whether I try to download to the portable hard drive or to a FAT32 partition on my laptop's actual hard drive. Is there any way to fix this, or can I be calmed by the fact that it just happens because it's installed on a portable hard drive? This problem isn't happening on Ubuntu (which is installed on my laptop's hard drive), where I am downloading from right now.
View 2 Replies
View Related
Jul 19, 2010
I installed adobe reader quite some time back. It was working fine. Nowadays it gets stuck up and then the screen fades out and then after some seconds it gets back to normal. What could be the problem.
View 9 Replies
View Related
Jul 19, 2011
I'm having problems booting up my Fedora 14 system. I see the Fedora splash screen (the one with the egg-like logo that colorizes as it loads); the logo fills up completely and then everything hangs - all I see is the egg logo, and nothing else is ever displayed. I also can't get to any of the ttys via the CTRL-F1 sequences.
I can boot into single user mode just fine. The install scripts all run just fine. The system itself is actually up an running, so I suspect this is either something in the KDE startup, or after init processes all of the start up scripts.
I'm assuming this isn't a startup script problem, because I see a "started XXX" message for every service in the rc.5 directory - in other words, all the startup scripts ran from rc.5.
So, how do I find out what is hanging? I'm not seeing anything in /var/log/messages, and pstree didn't tell me much about what init was doing.
I used to be able to follow inittab to see all the things it did at boot, but since inittab was stripped of everything it used to do a few releases ago, I don't know what init is doing anymore.
View 1 Replies
View Related
Apr 5, 2016
I have an asus eee 1015px, which was running dualboot windows and wheezy with no problems (except the browsers seeming to take up a lot of CPU). Today having backed up everything, I wanted to upgrade to jessie. URL...
Everything seemed to be progressing fine, no strange messages, it took 1 hour for
Code: Select allapt-get upgrade
but maybe that's normal. However, then when I did
Code: Select allapt-get dist-upgrade
It froze at 17.30 with a weird screen. The sort of thing you never want to see on an install, a sad face and blocks instead of text.
pic: URL...
Then it moved on and gave a readout, which seemed pretty ominous
pic: URl...
It then moved and gave a readout, hanging again:
pic3: URl...
Now it seems to be in loop, moving on every 15 minutes or so but always ending up with the same screenful of text shown in the foto below, which ends with the last line reading like this:
Code: Select all[17798.587776] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
or later
Code: Select all[20209.229273] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement)
This pic shows the full screen: URL....
This is baffling for me I'm not very experienced with debian.
View 8 Replies
View Related
Oct 16, 2010
I installed ubuntu 10.10 and everything works perfectly, but whenever I go to shutdown/restart, after showing the ubuntu logo (just like when you log in), the logo goes away, and it just hangs/freezes there.
I've tried waiting even for 10 minutes, but nothing. It there anything I can manually edit for it to just shutdown? If it helps here is my PC...
[URL]
...and to be specific the WLAN module is a Ralink RT3090.
View 5 Replies
View Related
May 10, 2011
After upgrading from 10.10 to 11.04 my laptop starts hanging after lock the screen & also some time it is getting log off automatically while working.
It is really strange as all the work is getting lost in mean of working, is some one has faced such issue.
What is the probable solution for this, any idea ?
View 9 Replies
View Related
Jun 17, 2011
During a routine update of my desktop (ubuntu 10.04), the update is hanging at "unpacking replacement compiz-gnome". I was wondering if it is safe to kill the update, and, if not, what else I could do. This has been hanging there for about 2hrs now, so its not just taking its time.
View 1 Replies
View Related
Mar 16, 2010
When I went to start up the computer, the kernel usually hung at the same place on boot up, although sometimes it booted just fine. The default kernel is 2.6.31.9-174.fc12.x86_64. It's boot up arguments are:
Code:
kernel /vmlinuz-2.6.31.9-174.fc12.x86_64 ro root=UUID=75d16864-ba74-49ef-aaa9-0a1dd3c92254 noiswmd LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=us rhgb quiet rdblacklist=nouveau
I also have kernel 2.6.32.7-37.fc12.x86_64, 2.6.31.6-145.fc12.x86_64, 2.6.31.5-127.fc12.x86_64. I have seen the same behavior out of all four of them. Last night I ran Memtest86+ all night. It took eight passes with no memory errors. As far as hard disks go, I have two Seagate Barracuda 1.5 TB drives operating as software RAID 1 (mirroring). One of the drives does have three bad sectors. The motherboard is an Asus P6T6 WS. This morning I plugged in the GP diagnostic chip that came with it, but I'm not seeing a whole lot useful there, except that now it is just displaying "FF" non stop.
I did some poking around on the web, and it looks like "FF" is supposed to mean that the CPU isn't properly seated, which makes no sense because the system monitor software is detecting all four cores perfectly, and I have no other odd behaviors anywhere else. At this point I'm rather at a loss to understand what could be causing the difficulties. Sometimes any of the four kernels boots fine, and sometimes they don't. The funny thing is that on the blue "boot progress bar" all four kernels hang at exactly the same spot if they hang at all. After doing some more poking around, I'm relatively sure that "FF" does NOT mean that the processor isn't seated correctly. I'm going to try contacting Asus and see how far I get towards getting some good info on what the diagnostic codes mean.
View 3 Replies
View Related
Oct 12, 2010
Recently i installed Maverick on my studio 15 laptop
It frequently hangs.Nothing works and i have to restart manually Is there any other way to restart Why is it hanging frequently?
Also i installed ati radeon drivers using additional drver bundled with Maverick.
After installing it shows d driver to be workinng fine
But while opening Ati catalyst control centre it says d driver isnot installed
how to solve it
View 1 Replies
View Related
Dec 27, 2010
I downloaded Ubuntu 10.10 and made created a DVD. When I started installing it, I'm not able to do it. I think its hanging. This is what happening: First I found a screen saying 'ubuntu 10.10' and it loaded for some time then I got a screen with a black color task bar at the top of the screen, then after some time it turned into white color and after some time it disappeared. Nothing else happened. I didn't find any pop-up window to start installation of OS..
But when I tried this in my friends house, I found that instead of 'ubuntu 10.10' there came 'Ubuntu' LOGO and it was little bit slow but a pop-up window opened to start installation..
Why its not coming in my PC..
my computer configuration :
Windows XP, SP 2
256 MB RAM, 1.81 Ghz
AMD 64 Athlon Processor 1800+
I want to shift my OS to Ubuntu completely.
View 1 Replies
View Related
Apr 21, 2010
Bit new to linux but what i saw with gloria in my opinion was a better os than windows. Just done a fresh install with helena on my sata drive and a dual boot with xp pro which is on my on my ide drive my problem is on boot I get to grub loading then boot hangs for 5 minutes before the dual boot screen appears and when it does I can not move up or down to select any options eventually however helena does start.
View 7 Replies
View Related
