Ubuntu :: Second HDD Improve Boot Time And Access Times ?
Jun 26, 2010
I managed to install a second hand 10Gb HDD on my old P4. I want to see how I can use this extra disk to speed up Ubuntu 10.04 if possible.
I installed my swap onto this second drive but since I never use swap I can't see any real improvement. Next, I'm considering the creation of a new partition on that disk that would handle /tmp. Could that improve access times?
Finally, what other tricks could I use with this 2nd HDD to speed things up?
View 6 Replies
ADVERTISEMENT
Aug 19, 2010
I installed bootchart and had my boot times analysed. Unfortunately, I can't make head or tail of the resulting PNG file. Could someone take a look at and tell me what I should do to decrease boot time?
View 2 Replies
View Related
Jul 13, 2010
I have Ubuntu 10.04 installed and although I had some problems initially, everything works fine now. I'm just bragging about that. I do have some strange "issues" with my boot. I know that Ubuntu is supposed to boot with only plymouth visible, but before I see plymouth I have a fairly long period of time when I see nothing but a console cursor (a.k.a. caret) blinking. I'm no expert in reading bootchart charts, so I'm attaching it for some feedback. I have no idea how and what to optimize.
My boot is ~40 secs as noted on the bootchart, but it would be nice to cut some fat if possible. Also, my StartUp-Manager is displaying some veeery long boot options. It doesn't look nice. I guess he's reading /boot/grub/grub.cfg but I don't think I'm supposed to see all that. my boot and shutdown screens are very low res and very ugly, often flickering on updates. I have 10.04 setup at work as a web test platform on a very old/crappy PC (Intel GFX) and bootsplash looks much nicer than on my home laptop.
View 5 Replies
View Related
Dec 7, 2010
LIVECD of 11.3 Gnome works fine in my old PC. I installed several times and each time system freezes/crashes during boot. I am linux newbie, so, I am trying to figure out my problems. In Livecd I noticed Hardware info list's my SATA disk as IDE. Driver Modules: "ata_piix"Attached to: #24 (IDE interface). Is it right? I have posted Hardware information output in 01: None 00.0: 10105 BIOS [Created at bios.186] - Suse 11.3 install problem My machine specs are: Intel DG31PR motherboard, Intel core2duo, 3 GB DDR2 Ram, 250 GB SATA harddisk
View 3 Replies
View Related
Mar 2, 2011
I am using Debian linux. I have 100 timers running. If a timer expired which will generate a signal and it was mapped to a same function handler. All the timers are mapped to one function handler. The problem is if the timer expires one at a time, the function handler called at a time. But if the 2 timers expires at a time, the function handler is called one time only instead 2 times. Is it possible to invoke the function handler as many times based on timer expirary happens simultaneoulsy?
View 14 Replies
View Related
Jan 21, 2016
My systemd-udev-settle.service is failing for some reason.
systemctl status systemd-udev-settle.service -a output
Code: Select all● systemd-udev-settle.service - udev Wait for Complete Device Initialization
Loaded: loaded (/lib/systemd/system/systemd-udev-settle.service; static)
[ode]...
Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable.
View 6 Replies
View Related
Feb 20, 2011
I've just installed Ubuntu 10.04 and find that if I leave the machine for more than a couple minutes, it will automatically log me out. Instructions at other sites have indicated that session controls are to be found in System>Properties. But there is no Session in the list under Properties in Ubuntu 10.04. How can I control this feature so that I'm not having to constantly login every time I turn around? I've searched everywhere and can't find a solution.
View 3 Replies
View Related
Aug 23, 2010
while doing FTP through command prompt, connections times out after some time remaining idle, but doing ftp through browser, connection doesn't time out after some time remaining idle... why is it so?
View 2 Replies
View Related
Jul 29, 2011
The last command shows successful log-ins by user, but is there a command that can be used to know when the internet was accessed last time? Is there a log of Internet connections made by the user?
View 4 Replies
View Related
May 27, 2010
I'm having here at home one quite addicted Farmville & similar game player which I would like to somewhat control in at least late night/early morning hours, Was browsing a while around for a program which could be used as a webpage blocker for several hours (predefined time), but all I came up was either scripts which I don't understand (I myself can be counted as a newbie in Linux stuff) and don't want to risk blindly or just user account time manager (timekpr).
I found a great solution in my case for MacOS users called SelfControl, but as you can guess ... there's no Linux native client for that. So, my question is - is there any easy and understandable way to block specific webpages for a predefined time period (let's say, every morning from 03:00CET - 08:00CET)?
OS: Ubuntu 9.10 Computer knowledge of the farmer: Getting on Farmville and/or playing Gnome's Mahjongg is pretty much all.
View 3 Replies
View Related
Apr 13, 2011
Seismicmike here. My first post. I'll try to be as clear and concise as possible. For the sake of this post, I'm going to use 1.2.3.4 as a place holder for my public IP. On my web server, I would like to be able to access the /var/ftp directory through a web browser. I have successfully done so with Google Chrome, but I cannot access the directory in Firefox or IE. Both FF and IE ask me for authentication but then time out attempting to load the directory.
I suspect that there may be something up with switching to passive mode and/or that this issue may be more with my configuration of Firefox and not with the server (seeing as how Chrome works). Another possibility may be related to SSL. When I connect with FileZilla, I have to use the FTP over Explicit SSL/TLS option in order to connect. In any case I still would like to fix it. I would also like to avoid having to install FireFTP if at all possible.
Steps to reproduce (not that you can without my actual IP =J):
* Open Chrome
* Go to ftp://1.2.3.4
* Enter username
* Enter password
[code]....
View 10 Replies
View Related
Aug 9, 2010
There seems to be quite a craze about reducing the Ubuntu boot times to 10 seconds. I never really reached the 10 second mark.. for me it was more like 30 seconds from when I selected Ubuntu in GRUB to when I was prompted to type in the password in GDM. First of all, is this what is meant by boot time? Secondly, I know this already is quite a good 'boot' time, but just for the sake of tinkering around, is it possible to reduce the time that elapses between the GRUB menu and GDM?
View 8 Replies
View Related
Oct 23, 2010
I'm running 10.10 on an IBM Thinkpad R60 with 3GB RAM. I did a clean install of 9.10 and 10.04, and recently upgraded to 10.10. With all three, I'm noticing mething rather strange; after passing the PC's BIOS screen, I get a flashing cursor for about 20-30 seconds before Ubuntu starts booting. When I did the clean installs, I completely erased the hard drive, so I'm not sure what's causing it. The hard drive activity light is on when this happens, as well. It's very strange, as I have an old Dell Dimension 4550 with a slower hard drive and less RAM than the Thinkpad...yet it boots up faster, with no flashing cursor.
View 9 Replies
View Related
Apr 25, 2011
My 64-bit Kubuntu has a rather long boot time, anyone else had 3 mins plus
View 2 Replies
View Related
Nov 8, 2010
This little guide is for anyone with an HP Touchsmart Tm2 series running Ubuntu 10.04 and above. PLEASE NOTE: These workarounds, solutions, and tips have been tested and verified to work on an HP Touchsmart Tm2-2050us running Ubuntu 10.04 Lucid Lynx and Ubuntu 10.10 Maverick Meerkat. Installation: There are no problems I have experienced with installation except for the display not working on the live USB/CD images occasionally, this can be fixed by simply closing the display lid, and reopening it (this usually has to be done at least 2 or 3 times). Display: Most times after boot up, the display is black. A workaround for this is closing the lid and reopening it (repeat until the display works). Another reported solution is as follows:
1) Open a terminal
2) Type:
Code:
sudo nano /etc/rc.local 3) Add this to the bottom of the file (this disables the ATI part of the hybrid graphics card):
Code:
echo OFF > /sys/kernel/debug/vgaswitcheroo/switch
4) Press CTRL-X (to exit), Y (to save changes), and ENTER/RETURN to accept the file name.
5) Reboot
Note: This solution is also reported to increase battery life.
Trackpad: It may seem that the right click button is disabled, but it isn't. To right click, you must tap the very bottom right corner of the trackpad. Also, by default the trackpad does not have multi-touch enabled (even though it is capable of it). A reported solution for this is:
1) Open a terminal
2) Type:
Code:
sudo nano /etc/X11/xorg.conf.d/50-two-finger-scroll-touchsmart-tm2.conf
3) Add this to the bottom of the file:
Code:
Section "InputClass"
Identifier "enable synaptics SHMConfig"
MatchIsTouchpad "on"
[Code]...
View 8 Replies
View Related
Sep 27, 2010
how to access current date and time from the system through CMOS in C programmes in Fedora.
View 1 Replies
View Related
Nov 1, 2010
At work, we use two very powerful servers to host a series of VMs to do some heavy-lifting analytical work. Part of my job has been to evaluate a variety of different virtualization environments, including changing the host OS (or dom0 kernel for Xen), changing the platform (KVM, Xen, ESXI, etc.), and changing the guest OS types.
I noticed a number of behaviors that Ubuntu exhibited that set it apart (almost always in a positive way) from the other OSes. Most astounding though was that when an Ubuntu 10.04 AMD64 server VM was booted from an Ubuntu 10.04 AMD64 server host (that is, same version of Host OS and Guest OS) in KVM, the guest boots in roughly 2 seconds. At least, the guest boots faster than the VNC connection can initialize.
I'm certainly not complaining, but I can't for the life of me figure out how this could be possible. I understand that the Upstart init daemon is very good about startup times.
View 2 Replies
View Related
Jun 17, 2011
First off, i have ran 10.10 for the past 6 months without any problems. Then last week i decided to try 11.04. I installed using Wubi. Now the problem is the computer only freezes when I am using a web browser (firefox). it completely freezes where I can do nothing, so I will kill it with the power button. When i try to restart, not even the bios will boot up, just a blank screen with the num/caps lock key flashing.
But after trying to restart several times the bios and boot loader will eventually come up and will start up normally until the same thing happens. I decided to reinstall using wubi so when i tried to boot itno windows, the windows partition was corrupted. I fully restored windows and installed 11.04 with wubi again only to have the same freezing problems.
I will be trying 10.10 again and see if it just a 11.04 issue, but thought this problem should be out there if anyone else has a similar experience
View 1 Replies
View Related
Sep 25, 2009
When booting Fedora 11, my system hangs for a very long time on starting udev. Sometimes I get an I/O error. However, my hardware is fine. I do eventually get in to the system.
View 7 Replies
View Related
Nov 26, 2009
I have just installed Fedora12 x86 64. On booting more often than not it hangs just before completing the login screen.I will try some of the options in the wiki. In the mean time has anyone else experienced this and resolved it.The odd thing is although the keyboard is not on, (num lock light goes out as boot starts and only comes back on if it has fully booted), the mouse will move around the screen but the click has no effect.Note the same behaviour was shown on the x86 64 live cd which I needed to install to enable me to create a bootable usb stick from the x86 64 DVD.
View 4 Replies
View Related
Mar 5, 2010
It looks,slackware is taking too much time to boot. It's starting daemons at boot time.
What are those daemons that i can stop at boot time to increase booting time?
What's the best way to stop starting daemons at boot time?
View 14 Replies
View Related
Jun 4, 2011
I actually have it installed on two of my computers. One is an older Acer Aspire 3100 that dual-boots windows 7 and Ubuntu 11.04, and an Acer Aspire ONE that has Ubuntu 11.04 as main OS. Before Ubuntu, (even currently) I'm a MAC user, and i'm really liking Ubuntu. On my 3100 it works just fine except the screen flicker on wake, but a quick reboot will solve that.
On my Aspire ONE i've had to re-install ubuntu multiple times. (we're talking 5 or 6 in the last month) Sometimes, it'll boot up to absolutely nothing. One time I got a weird error message everytime it booted. The last install froze up a lot, and eventually would only start to boot into setup. I reinstalled Ubuntu, again and it worked until I shut it off. Boot back up, same thing. Threw me right into setup. I was able to get around it after 5 or so tries of rebooting, hitting ALT F11 and somehow got into ubuntu recovery, but loaded normally. I'm using it now and it's working great currently.
Specs on the ONE
1.5GB Ram
8GB SSD (could this be the culprit?)
ATOM (1.8 or 1.6) GHz Processor.
Halfway through this fiasco, I put windows XP on it and used it solid for 3 days without any of the mentioned above issues.
View 2 Replies
View Related
Dec 1, 2009
I don't know why, but when i first boot openSUSE at the morning in my Aspire it hangs over and over again. I don't know why is this, but the gecko appear, the white bar appear, and moves 1cm, and then, puff no more blinking from the hard drive. Then i force te reboot, over and over until works.The message is: acerhdf: no Aspire One hardware foundWhen i first installed the mini with openSUSE it works perfect for a week, and then start this problem.I have tried with different kernel flavors (like desktop) and still nothing.
View 9 Replies
View Related
Mar 21, 2011
I've been a long time Windows user, but I've started a small firm and because of lack of funds, I've decided to install Ubuntu on my company's PCs.I have 8 PCs in total - 6 of them with Intel CPUs, and the last two with AMD CPUs. I bought the extra two computers because I've managed to find an extra two people to work at my company, and AMD-based PCs are cheaper so I've decided to buy them instead of Intel.Long-story short, I've installed Ubuntu 9.10 and boot time takes about half-an-hour. After the computers finally boot, USB hardware doesn't work at all. I was forced to buy PS/2 keyboards & mice and they both work fine after the PCs boot.I don't know what's causing this delay.I've enabled Cool 'n Quiet from BIOS.I've tried several instructions like editing the /etc/modules file.I've installed cpufreqd, tried to configure it, but it didn't work.I've check the CPU stats and my CPUs are running at 800MHz. I can't believe nobody managed to fix the 800MHz problem as I've noticed it's quite common among AMD Ubuntu users. I think I've tried almost anything that I've found on this forum.I can't keep asking my employees not to reboot their PCs. Both Chrome/Firefox crash a lot on Ubuntu so they're forced to restart their computers.The computer specs are: AMD Athlon II X2 240 dual-core @ 2.800MHz, 2GB RAM, 500GB HDD, etc.
View 9 Replies
View Related
Mar 4, 2010
Splashtop caught my imagination of my own tv like computer-"1button and ready to go " have tried puppy xpudWebConverger still unhappy Now lucid aming for 10 sec boot-Keeping ma fingers crossed installed a minimal karmic and am getting a decent 27 sec I Jus Wanted to ask: Is there a way to remove the grub an directly boot into ubuntu -not just hiding it by editing grub.d files and any other ways to reduce boot time.......
View 9 Replies
View Related
Oct 14, 2010
I've got two laptops running Ubuntu. Both have had Lucid installed from the live cd. I have upgraded one of them to Maverick. Both distributions are running great after they boot up, but I haven't experienced any faster boot times with either distibution. Both boot to Bios and then the screen goes black with a blinking cursor in upper left corner of the screen. The black screen remains for 30 to 45 seconds and then I get the Ubuntu splash screen for maybe 5 seconds, and then desktop. Why am I not seeing faster boot times? I realize 45 to 60 seconds is good compared to other os's, but I anticipated much faster boot times. Shut down on the other hand is quite fast at maybe 5 to 10 seconds. Does anyone else get this black screen on boot? Seems like wasted time cause I can't tell what's going on during the time there is a black screen. This is not a real big deal breaker, as I don't reboot very often, but I just wonder why bootup isn't faster.
View 7 Replies
View Related
Nov 24, 2010
I am trying to modify the file access time in a Python routine I have. I have I believe the correct code for this but have a greater issue. Looking at a random file in my home directory I can see it was last accessed yesterday (I didn't open this file yesterday) so it was presumably my virus scan. No problem there Now I have opened the file today,rescanned the file for viruses and read the file in Python and the file access time remains the same!I have checked the access time by right clicking on the file and choosing Properties, using "ls -lu", and using os.stat(path) in Python.
View 9 Replies
View Related
Jan 5, 2011
Is there a bash command that I can use to determine the last file access time? I know about -atime option for the find command, but I want to doublecheck to make sure that I'm doing this correctly (the output when I use find -atime isn't what I expect).
View 4 Replies
View Related
Jul 26, 2010
I've been having a problem on my AMD based machine, 4cpu, gigabyte ga-ma78gm-s2h Mobo, 8GB mem, two 2 terabyte Sata HDs.One thing I've found is that any kernel after 2.6.32-17 has a randomness at boot time whether the system will completely boot or not.
For instance just today I downloaded and installed 2.6.32-24
It fails to boot (I've tried cold boot, warm boot).Running its repair also fails to completely boot.My experience is that if I keep trying it "may" eventually boot but I believe there was some change after 2.6.32-17-generic that's causing the problem.Because as with 2.6.32.23... which also fails to complete bootup many times... eventually my guess is that 2.6.32.24 will also boot "sometimes".But why does 2.6.32.17 always boot for me? Something changed and its not my setup.
View 1 Replies
View Related
May 13, 2010
Lucid 10.04, auto upgraded from 9.10, accessed through NoMachine NX from my MacBook Pro 10.6 system.
When I try to access the time settings through the System > Administration > Time and Date menu, all I get is the greyed-out display with the message Not authotized to make changes at the bottom.
With other administration functions, I am asked for sudo-style authorization with my password. That doesn't happen with Time and Date.
View 2 Replies
View Related
