Fedora :: How To Switch To Dual Booting On Main Machine
Nov 18, 2010
I'd like to switch to dual booting on my main machine. However, I'm like, a really serious competitive gamer. I play in leagues, go to LANs and performance is my greatest concern here. If I dual boot Fedora & Windows, will I have any performance issues with Windows, while booting in Windows, if I have Fedora on the same hard drive?
I don't think there should be any issues but I would like some clarification or nformation on it. Searching for 'gaming' with Linux isn't very information when it comes to dual booting, so I was just wondering.
TL;DR: Will dual booting Windows & Fedora cause any CPU/GPU/LAG/performance issues while I boot into windows and play a game (Source, TF2, Unreal Engine Games...etc)?
I'm dual-booting windows 7 on (hd0,0) and Fedora 13 on (hd0,4) and it's working fine until I repaired my windows 7. Afiter I did the repair on my windows 7, The booting sequence now skips the grub menu and automatically boots into windows without allowing me to take my pick.
i currently am running windos 7 (64 bit) and would also like to install ubuntu on a second hard drive. i understand a dual boot is easy enough to do, but i'd like to install ubuntu so that it and windows are completely isolated. rather than be prompted with a boot screen to choose os, i would do so by changing hd boot priority in bios. i'd like the end result to be 2 separte computers in one box. can it be set up this way, and if so, how?
you add a rule which allows a virtual machine to connect to ssh on the main fedora host?so connecting from a virtual machine to the main fedora host installation? I think i have to use an iptables command but not really sure
I have a really weird one. This may be a putty issue, or it may be a config issue in Ubuntu. I've no idea who to blame. I have four machines involved in my little issue that has me scratching my head on where to even BEGIN to diagnose what is going on. The computer I'm attempting to connect to (For identification purposes, I'll call it the main machine) is running a relatively new install of KUbuntu 10.04, stock install of openssh daemon. ufw is disabled, firewalls are off, etc, and I can prove that later.
The machine acting odd is a Win XP 32 bit running Putty. Haven't had a problem until this reload of the previously mentioned machine. A Work machine that is running RedHad of some flavour. A Virtual Machine running a headless setup of Ubunto 8.04. Now that the introductions are over, here is a quick map of the machines that can successfully connect with. My major problem is that I cannot get SSH (And ONLY SSH) to work between the XP machine and the main machine.
Work -> Main = Works Work -> VM = Works XP -> VM = Works XP -> Main = Fails XP -> VM -> Main = Works Main -> Main = Works (IE: "ssh localhost") VM -> Main = Works
When I try to get the XP machine to connect to the Main machine, I get an error with Putty saying:
"Server sent disconnect message type 2(protocol error): baad service request ssh-connection"
I've changed Putty to try using SSH Protocol 1 only, but it says the protocol isn't installed on the Main machine, which is true. I've tried setting just 1, and it gives me the error, and I've tried setting it to "2 only" and it again comes up with the error. I went into /var/log as root on the Main machine, and did a "tail -n0 -f *" and then tried to connect, but nothing relevant shows up.
As for the proof that the firewall is disabled, three of the machines are working with Synergy, I am able to swap between all three of the machines without a problem, I can get to WebAdmin from the XP machine to the Main machine, and I can open a Samba share from the XP machine to the Main machine without a problem. This sounds like a protocol issue, but I can't see anything in WebAdmin that'll put me in the right direction.
I have installed the Fedora on my laptop with Vista installed first. Now I am using the OS separately fine. I just choose which Os to boot in to every time I turn the machine on. However, I now need to do certain task that I need to switch between two OS. Wonder how to switch to Vista when I am using Fedora without rebooting? and vice versa.
I have installed the latest Fedora on an external (USB) hard drive. Is it possible to alter part of the program so that I can run this external hard drive on any machine regardless of it's operating system?
I am starting this as I am getting bit desperate. I have installed Windows XP virtual machine. As it created partition, formatted it, and copied files it started to reboot and i got message �A disk read error occurred press Ctrl+Alt+Del to restart� I tried also boot from CD, but I got �Booting from CD-ROM... Boot failed, could not read from CDROM (Code001). It seems that it is not even spinning the CD. I have also noticed that there is no CD/DVD drive listed in virtual machine details. Although, there is boot option to select CD as a device to boot from. There are probably two separate issues, booting from HDD and not detecting CDROM. However I installed the same virtual machine on Fedora 12 without any problems and just cannot solve this
My laptops screen has recently gained an annoying blue tint, which i do not have the expertise (or money to pay somebody) to fix, so i am using my TV as an external monitor. So what i am proposing to do is purely use the External and leave the laptop monitor off. I am dual-booting Windows XP and Ubuntu 10.04 Devel, In XP it was a simple case of right clicking the Intel Graphics Media Accelorator and choosing the External Monitor option, this then allowed me to set my resolution to 1280x960 and i was happy. (even bigger desktop than before actually)
I cannot seem to find this option in Ubuntu, going through System -> Prefrences -> Monitor gives me the option to mirror the screens, but that leaves me with an incredibly low resolution, choosing to not mirror the screens allows me to set the resolution to 1280x960, but the LCD screen still acts as my main. Is there any way I can set it to recognise the TV as the main, and switch off the LCD like I did in Windows?
I Installed fedora in Virtual PC after adding the line while booting as shown in the forums. But after installing to the hard disk, The Fedora virtual machine is not booting. The window closes without any notice automatically.
When I installed 32-bit linux first, and later when I installed 64-bit linux on a different partition.. then the computer wouldn't boot either linux properly..I'd like to hear from people who installed both 32-bit , 64-bit redhat linux successfully.
I run an Intel DP35DP motherboard with 3.0 gig Intel processor with 4 gig of ram. Two 500 gig Sata hard drives. The first hard drive is for Windows XP. The second hard drive is four 6 different flavors of Linux and Data backups. Drive 2 the first 120 gigs is split into six 20 gig partitions with a 2 gig swap file. The second 370 gig is for file backups and Norton Ghost 2009 images.
Install Fedora 11 on the second hard drive and use the automatic partitioning tool but don't put grub on your Master MBR put it on the root partition on your second drive. When you get to the Boot Loader Configuration screen make sure you check the Configure advanced boot loader options. The next screen will give the option where to put Grub Boot Loader. It should say like sda or sdb. Sda is usually your XP Drive. From their finish loading. Put Grub on Sdb?.
Now duel booting using XP boot manager.
Go to [url] and download Bootpa26.zip (It's freeware) Unzip the file and it will make a directory called Bootpart. From the Windows command line change directories to C:ootpartootpa26. Run the command bootpart. This is what you should see.
If youll notice I highlighted in red. That is you�re first Linux root partition 1: D:* Type=83
Run the command Bootpart 1 fedora11.lnx Fedora 11 Leonidas
how I should edit the boot loader so that both WinXP & Fedora are bootable selection options on the boot splash screen. My apologies if this has been asked before. My present grub.cof reads as follows but does not provide me with an XP boot option.
# grub.conf generated by anaconda # # Note that you do not have to rerun grub after making changes to this file [dalpets@localhost ~]$ su
I have now Bt4 on live envir. and i am about to make space for Bt4 using Gparted from Bt ( live env) 'resize & move' at Free space preceding & Free space following on a 500Gb drive,I gave it 101 MiB. I see it says MiB instead of Gb .. but i am confused as to before & after does the before mean actual space fedora will have or is it Mb space for the bootloader a 100Mb or is that 10Gb ?
I was using Fedora 14 without any other OS installed. That was until i realised i need After Effects because AE 6.5 under wine does not cover my needs.
I installed win XP. Everything's OK so far. Next step, installed Fedora 14. Also, it went OK. I reboot`d the system and i was presented the "mini-shell GRUB Bootloader terminal". Since i don't know anything about GRUB nor i am an HDD Expert i did nothing. But, i used the "System Rescue CD" and chose the "Boot an existing LINUX 32-bit OS". Fedora did load and i'm writing this post from within fedora. The setup i used during Fedora installation is the following.
Code:
When i was presented with the bootloader options i chose to "install bootloader on first sector of boot partition" (something like this i don't remember it) and i did NOT choose "install on MBR" (again i dont remember the exact phrase).
The HDD partitions i created have these properties according to "disk utility".
I want to install Scientific Linux 6 (RHEL 6 recompiled) and Fedora 14 KDE (side by side). Any step by step procedure to do so. Insofar I've failed dual boot any 2 fedoras.(I've heard that there is an issue with grub legacy, it can't dual boot .. is it so? hard to believe! So far I first installed SL 6 , installed its /boot on MBR and then installed Fedora KDE on other drive and installed its /boot on some other drive ... can't dual boot only getting SL 6 at booting. For both os I was using lvm for their primary drives.
I am using a Macbook Pro 5,5 , and I want to have Fedora and OS X dual boot. I have created free space using the disk utility from the Snow Leopard install CD. I now have 50 GBytes of free unformatted and unallocated space. So I enter the 64 bit Live CD of Fedora 14 inside, and it works flawlessly in boot. I click on "Install to Hard Drive" option and then of all the installation options I select the "Use Free Space" one. I then use the default settings:
It creates a 500M boot partition (/dev/sda3) and an LVM partition (/dev/sda4). ext4 and swap are allocated by default into the LVM Volume Groups. It then asks me for the location to install the boot loader providing me with 2 options: In the Master Boot Record (MBR - /dev/sda) or in the first sector of the boot partition (/dev/sda3). I go with the second option.
Installation proceeds as planned. While rebooting, I enter OS X and I install rEFIt. In the rEFIt menu, I select the Linux icon, which results in a black screen saying that "no bootable device" or something like that. I restart my Mac, and then select the rEFIt partitioning tool that says that my MBR needs to be updated. I let it sync my MBR, and I restart the computer. I click on the Linux icon again, and then I am presented with the penguin logo on a gray background... and that's about it.
I can't do anything from there. No system is booting, nothing is loading. Booting to my OS X partition works just fine, but Fedora refuses to boot. It is stuck in this logo screen.
I am severely confused when it comes to partitioning. I have Fedora 11 on a liveCD now. I first tried to install that on to my Acer Aspire 1 netbook alongside another distro, but that failed due to my lack of partitioning knowledge. (It needed a /root device to install in I think).
Well, I would LOVE to have Fedora 11 with Vista (on my main laptop rig - acer aspire 7520) when I go back to college next week (go hokies). But I need Vista for work with my lab applications that uses windows. Can someone please provide me a noob-proof method to install Fedora without corrupting Vista? I really need Vista, but I really enjoy linux.
I tried to dual boot Windows 7 and Fedora 11 following the instructions in the link at the bottom of this post. Now fedora boots great, but when it tries to boot 7 i get the message "Disk Read Error Hit Ctrl+Alt+Del To Restart" is there anyway to fix this with out reformatting?[URL]..
What I'm running: Acer 4810t intel centrino dual core 1.40 4 gb ram 320 HD Vista home premium 64 bit
1. what do I need to do this I have a program to make a new partition already what I need is to know what is the best boot selector to use I'm thinking of buying VistaBootPro will that work well?
I'm trying to find a simple solution to dual-boot Fedora 11 onto Vista Home Basic Edition, using the live disk as the installation media, but I can't find one anywhere. Maybe you could point me in the right direction... (But first let me explain that I am a newbie when it comes to Linux.)
So, my computer specs are... Make/Model: Dell Inspiron 1525 Processor: Pentium Dual-Core CPU T4200
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version. I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
i had recently installed fedora 12 in a system running debian lenny in (hd0,0), its grub is installed in mbr and the grub of fedora is installed in the installation partition of fedora .I defined a separate partition /boot for debian but for fedora i used the available space for boot swap and /. i booted with live cd to copy the grub.conf of the fedora to add it into menu.lst of debian but i have got "error 15 : file not found".
After recently looking around the Linux world, I decided that I would also like to try fedora. Primarily because of the BTRFS file system that I would like to try out while still having Ubuntu as my main OS. Normally, I'd just partition as usual as I would with any of my other OSs, however this is the first time I have tried to dual boot two Linux installs on two different file systems. Does anybody have a better method of going about this? Or to just go about it as usual and install on two different partitions? Also, I do not want to wipe the data from the computer as it is now. I have it all backed up, but I don't really want to go through the hassle.
I'm having trouble dual booting Windows 7 Ultimate and Fedora 14. I am using Grub 0.97 (The grub before Grub 2). I installed Windows 7 after installing Fedora 14 so the damn Windows BL covered up Grub. But I can't get into either Windows or Fedora. I get an Error 17: Cannot Mount Selected Partition. And the system can't find the BL for Windows so it always tells me to restart. And I have both OS' on the same hard disk.
I had a fresh copy of Windows Vista installed (original from the factory)- and I followed a document of dual booting - however I think I did some mistake or automatic skip of install Grub boot loader-
Now my fedora 11 is running smoothly but windows vista is gone or does not boot - I don't have any boot disks- they give examples having floppy disk a boot disk- my laptop doesn't have floppy drive- I guess I could manage in cd or flash drive.
I see my computer's config in fedora desktop as computer:///250%20GB%20ATA%20WDC%20WD2500BEVS-6.drive computer:///250%20GB%20ATA%20WDC%20WD2500BEVS-6-1.drive computer:///PIONEER%20DVDRW%20%20DR-KD08HB.drive computer:///root.link
I noticed that the partition NTFS still exists and it has not been erased. I did install linux on hda5 since hda1 was partitioned with NTFS
Is there any manual and precaution to be taken while doing the same dual boot system ?
Or is it possible to have dual boot with the present config- although i am ready to install fresh window vista and fedora as my dual booting systems...
I have just installed Fedora 12 on a 10GB partition separate from the pre-existing Windows XP partition. My problem is that when I turn on my aspire one ao751h it doesn't give me the option to boot Windows XP even though when I mount the partition with XP on it the files are all still there. I think it has something to do with GRUB which I have never dealt with before or the way I set up the partitions when installing Fedora 12. How would I change the start-up screen to allow me to boot from my XP partition as well?
I am having trouble getting FEdora 15 running on my MacBook Pro. I had Fedora 15 installed before on this MBP before, so I know it works. I basically followed the good old instructions of
1. Create a Windows partition in bootcamp (rEFIt was already installed from trying to get ubuntu running) 2. Boot from disk and install in Windows partition with bootloader on installed on the / partition 3. Install, reboot, and resync the MBR using rEFIt partitioning tool 4. Shut down the computer and start up on the parition you installed linux on
How do I stop this? Ideally I'll only have two entries, Fedora 15 and Windows 7 where Windows is set as the default primary o/s to boot up. The current method I use is to fiddle around with that grub file and set default to entry 3, which used to be Windows 7 but is now a Fedora (which means Fedora is now set to default boot up).
