Ubuntu :: 10.04 Using Over Nearly 2 Gigs Of RAM At Start-up
Jul 5, 2010
Code:
I am about at the end of my patience with this. I have ran BUM and removed everything apart from the bare essentials stop most programs from starting with Startup Applications and just did a pretty violent clean up of programs I don't use.
I removed preload as I had that installed to see if that was the problem, but that made no difference at all.
I already know about the xorg problem but this should not affect me as I am running the property ATI driver.
This wouldn't be too much of a problem if it just sat at about 2 gigs when idle, but it doesn't. After about 3-4 hours of it being on it's using all my memory and the PC is unusable.
View 5 Replies
ADVERTISEMENT
Jul 12, 2010
i doubt theres a fix for this as wine is emulating windows but is there any possible way to speed up wine a bit? I do need some windows programs to work properly but there soooo laggy. my system is a msi slim pc with 2 gigs ram and 500 g hd so i dont see why it would be running slow or is that just how wine is?
View 1 Replies
View Related
Mar 13, 2011
how can I format my Creative Zen Vision M and use it then as an external drive? I dont want to use it as an MP3 and as a hard drive, i want to remove everything from it and use its 30 gigs.I'd rather format it into fat32, but could also deal with ext3
View 5 Replies
View Related
May 14, 2010
10.4 install on ibm g40 failure. I'm trying to install U 10.4 on an IBM Laptop g40 with .75 gigs of ram with no luck. Workstation CD I use f6 and remove splash- from other options. When I select install option the screen goes black after moving through the Ubuntu dots then the screen goes blank.
View 7 Replies
View Related
Aug 27, 2010
Like the title says, I uninstalled wubi 10.04 last night and I noticed that my computer was running extremely slowly. I checked the amount of RAM and it said I only had 1 GIG which is definitely wrong. I have 3 GIGs. how I can recover that lost memory? I've tried searching google and haven't really found anything promising..
Also: I'm running windows 7 32-bit on a Sony VGN-CS190.
View 7 Replies
View Related
Feb 4, 2011
how come shared memory is only using 4 gigs of ram?
Code:
localhost router # free -m
total used free shared buffers cached
Mem: 8001 858 7142 0 130 235
-/+ buffers/cache: 492 7508
[code]...
View 3 Replies
View Related
Nov 22, 2010
I have a dvd that is 5 gigs and I want to put it on a dvd that is about 4.4 Gigs. Anyone have an idea of software that will reduce the size of one dvd so I can put it on a dvd of smaller size. My dvds at my house are always getting manged and destroyed so I want to burn a dvd that will take the fall and make another copy of the one I do have. I will never redistribute any burned dvds. I saw a recent supreme court ruling that deemed this and using libdvdcss legal. This really gets me going. When I have a file I want to burn thats 50 Megs bigger than than 4.4gigs on debian systems so it tells me to put in bigger storage, whatever.
View 12 Replies
View Related
Feb 14, 2010
I have a UUID file that has grown to 8.4 gigs... and I don't know what to do. Its sucking up all the free space in the partition. I guess I will have to delete the file but I don't know how to do it properly.I suspect this is a backup of all the data I have been moving around between drives recently.
View 2 Replies
View Related
Aug 11, 2011
i just downloaded the newest kde spin from fedora's web site.installed fine, but have noticed that only 3.2 gigs of 4 is being shown on the os.the bios see's 4.this doesn't happen on windoze but it happened on linux mint 64 bit also.why is linux distro's not seeing it?
View 6 Replies
View Related
Mar 16, 2011
I'v downloaded the new versions of suse many times. I average 3 to 4+ times before it's successful, bad downloads(bad checksum) or download stops for no reason. I'v used direct link and bittorrent. Bittorrent takes 2-3 times as long. So, I usually use direct link. I can do the download in about 6-8 hours. The first time, it stopped at 334 megs, using direct link. Using bittorrent, it took about 16 hours. I got a bad checksum. Is there a way I fix the file without downloading it again? Suse 10.4
View 9 Replies
View Related
Jun 5, 2010
no disk detected when installing debian 5 on a msi P55-GD80 mother board 8 gigs Kinsgton Ram and 2 x seagate barracuda 500 gigs 9BD648-552, I get a list of drivers to choose from but dont know wich to choos
View 3 Replies
View Related
Oct 13, 2010
Im trying to run synergy on startup. This works fine on the client, but it wont start automatically on the server. I put this line in an entry in startup applications:
[code]...
but still no dice.
View 9 Replies
View Related
Oct 27, 2010
I installed Ubuntu 10.10 64-bit, downloaded Adobe reader '.bin', from the terminal
It extracted and asked me for a installation location, to which i put [~]
It then finished the installation.
But when i click on the icon in the start menu or on desktop it fails to start, when i also click on a .pdf document it also fails to start!
View 2 Replies
View Related
May 4, 2011
I did a clean install of Ubuntu 11.04 64bit and the start up time is abnormally slow. If I start up the computer and don't press anything, the start up time is 30 minutes but it usually doesn't start up at all. It just boots into a purple screen, no splash, then it sits there and the computer doesn't have any loading lights flashing.
I had a similar problem with 10.10, but I assumed it would go away when I did a clean install of 11.04.
I can't get a read out of what's going wrong because when I press Esc it doesn't display anything, though weirdly it can sometimes get the start up process moving. I have also found that pressing enter really fast can sometimes help and something that seems completely oxymoronic, if I press the power button while it's starting up that can make it work, but nothing works every time.
View 8 Replies
View Related
May 4, 2011
I have a mysql database and i use it with apache for my webpages. And I guess it dosen't start when the computer starts so I have to manually start it with "sudo /etc/init.d/mysql start" This returns fail so i went to '/var/run/mysqld/' and the folder was empty. I don't know if this is the problem or not. How can I fix this?
View 9 Replies
View Related
Dec 10, 2009
I have 3 script BASH. I want start this script when the system start,stop and reeboot.
View 4 Replies
View Related
Jan 19, 2010
I'm trying to find how to schedule a process to start at a specific time (not on start up). How would I schedule a process/application to start at a specific time (if it matters, it will be a background process). For instance, have process abc start every weekday at 5am. I've done this for windows many times though have only been using linux regularly for a few months and haven't figured out the best way of doing this.
So far the best solution I have is to create a program that will start on boot and have it check the time and sleep until the required time and then start the required process(es) at the required time(s). But this seems more of a hack since I'd expect there to be a proper way of doing this.
View 4 Replies
View Related
Sep 2, 2010
I am using Rhel5 and I'm new to linux so pardon me for sounding a bit green around the ears.Anyway..I got an error message a few weeks ago about how the start up script that displays icons on the far right of my start panel was malfunctioning and it was going to be deleted from the start-up. didn't really know what it really meant and I just clicked ok.wireless eth0 status icon as well as my amarok status icon are hidden on the start panel. How do I get it back/add that script back to the start-up
View 6 Replies
View Related
Jun 7, 2010
I have setup a CentOS 5.5 server as a DHCP server. That will be it's only task in a Cisco callmanger VoIP environment The DHCP server that comes with CentOS 5.5 is from ISC V3.0.5 -redhat.
The server (HP DL360) has two physical NIC's of which only NIC1 is used (ETH0)
ifconfig shows:
Code:
The interface has a fixed IP setup.
My dhcp.conf file looks like this:
Code:
When I start (try to) dhcpd via the service interface or via the prompt as
Code: service dhcpd start
I get an [FAILED] message and the following is in /var/log/messages
Code:
But when I start the DHCPD on the comamnd prompt in debug mode it looks as follows:
Code:
and /var/log/messages shows:
Code:
Why does the system ask a declaration for eth0 0.0.0.0?
View 3 Replies
View Related
Apr 14, 2009
I just moved my / from sda1 to an ide drive, hde1. i dont see how this could have caused any of these issues, but it did.
First my network card failed to start. i added a line in my rc.local file (where i put all of my additional programs, etc i want to start):/etc/rc.d/rc.inet1
The above now starts my network card with my static ip configured. dhcpcd also worked but i wanted this static.
Now samba will not start. i have the following line in my rc.local: /etc/rc.d/init.d/samba start
This used to work just fine. at first i thought that samba may be trying to start before my network card gets an ip, but the line is *after* the network startup line. just to make sure, i made an additional script called startsamba which contained a sleep 60 followed by samba start, to delay the startup of samba even further.
The message samba reports is very vague, something like failed - core dumped. most of the core dump log is garbage characters, but here is the beginning which seems like it might contain some info:
Code:
ERROR: Can't log to stdout (-S) unless daemon is in foreground (-F) or interactive (-i) after the system starts, i can drop to a console and type "/etc/rc.d/init.d/samba start" and the service starts just fine. i've also tried starting samba manually with "smbd -d" which also produces the core dump when started from rc.local, but not when started from a console after startup.
View 8 Replies
View Related
Sep 2, 2010
I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
View 3 Replies
View Related
May 11, 2010
i want to start apache and ktorrent on the systems start up, is there a program that will do it for me or do i need init scripts?
View 2 Replies
View Related
Feb 15, 2009
I want to monitor my work on the terminal.I know we can use script command.But every time when I start the terminal, I have to type script to start it.I want to automate it. So where should I include this command so that it will start as soon as I start the terminal ?
MY WORK TILL NOW: I have put this "script" command in the .profile.The when I start the terminal, it became an INFINITE LOOP.I am able to "echo".Thats coming only once.....but if I write a "script" command then it is becoming an INFINITE LOOP.
View 1 Replies
View Related
Aug 29, 2009
I've been fighting to get my wireless working and I've finally made some progress. I can actually manage to connect to my wireless network and so far it has been quite stable (fingers crossed).
However there is one slight nag. My wlan0 interface driver refuses to start at startup. When I type iwconfig its just not there. To fix this I have to manually run "rmmod rtl8187" and then "modprobe rtl8187". Then it works fine.
I've been trying to make a script to automate this but without success. I've tried both editing my rc.local and kde startup .xinitrc
How I could get those two commands to run automatically at startup after the boot process? I'm running Arch Linux and KDE 4.3
View 7 Replies
View Related
Sep 22, 2009
I use Opensuse 11 with fvwm. How can I get conky start automatically when I start fvwm?
I setup the conky under fvwm session for my Opensuse 11 but it won't start automatically. I am wondering how to write some kind of scripts to force it to start automatically and with a delay about 10 seconds after fvwm starts.
View 10 Replies
View Related
Oct 9, 2009
I just installed TuxGuitar - very cool - and to get the sound to work I had to install Timidity++ as well. Before I start TuxGuitar I have to execute:timidity -iA -Osin a terminal window first, which is kind of a pain to do every time I run TuxGuitar.How do I get this line to execute on startup such that timidity is running when I start up? I tried adding that line to rc.local
View 13 Replies
View Related
May 27, 2010
I install lirc and want to prgram irxevent start automatic when the system start
Code:
System->Preferences->Startup Applications
Add an item,but that not works every time,means sometimes cannot work.
View 2 Replies
View Related
Jul 6, 2010
when i start the computer i will have 3 seconds to choose windows xp or else it will go on linux but someone told me that by changing the grub.cfg when i start my computer i will have 3 seconds to start linux or else it will be xp is this true ? and if it is can someone explain me how to do it because i would like that
View 3 Replies
View Related
Dec 6, 2009
I use FC8 and i want some services like HTTPD and NAMED to start at the start of the system , how to create a script to do that .
View 9 Replies
View Related
May 25, 2011
Fresh install, followed the directions,
# ./configure --with-mysql --with-openssl --with-openssl-libs=/usr/lib (MySQL 5.5.12 & OpenSSL 1.0.0)
Everything seemed to go well enough. Stock lighttpd.conf. However, it won't start on boot. Not even manually via:
# /etc/init.d/lighttpd start
or
# /etc/init.d/lighttpd -f /etc/lighttpd/lighttpd.conf (came across that while scouring Google).
No messages, no logs, nothing. ?
View 17 Replies
View Related
