Fedora Hardware :: System Crashes Due To Incorrect Interrupt Sharing
May 15, 2010
I have random crashes since I upgraded from Fedora 11 to Fedora 12.I searched the internet to try to find the root cause of the problem.I created this bug report:URL...However, no comments were added how to solve the problem.Enabling msi for nvidia and hda-intel made the system much more stable. But I still experience sometimes crashes.I do not know how to enable msi for uhci_hcd:usX, which is still sharing interrupts with ata_piix and ehci_hcd:usbX.Have you some hints? I hate it when my Fedora Linux system is crashing randomly.
View 1 Replies
ADVERTISEMENT
Apr 22, 2010
Program code as how to measure interrupt latency..
View 2 Replies
View Related
Mar 3, 2010
Now that I have system-config-display installed I tried to create a new xorg.conf so I can have 3D acceleration, etc using the correct driver. But the xorg.conf file generated does not work. It locks up the laptop (Toshiba Satellite A45-S250). I don't understand why this happens because the Fedora 12 Live CD (for i686) works find on boot.
I tried looking for the xorg.conf file after booting the live CD but it doesn't exist. I don't understand what is happening here. Also, when I used an older version of Fedora (8 I think) the X driver was i810 which worked fine. It gave me all the 3D acceleration, etc. When I installed F11 it gave me a dumbed down install using the VESA driver. What happened to the i810 driver? Why does the intel driver not work? Why does the Live CD work great but an installed system not?
Necessary info: Toshiba Satellite A45-S25 Fedora 12 (preupgraded from F11)
View 1 Replies
View Related
Sep 22, 2011
On my system (OpenSUSE 11.4 - kernel 2.6.37) ifconfig indicates different interrupt number for eth0 than proc aqd sys file system.
ifconfig indicates 17:
proc fs indicates 43:
sys fs indicates 43:
Relevant part of lspci -vv output for irq 17 (this belongs to wlan0 and not to eth0):
Relevant part of lspci -vv output for irq 43:
View 1 Replies
View Related
Apr 3, 2011
In System Monitor, on the File Systems tab, the "Total", "Available" and "Used" columns don't seem to add up, and the "Used" percentage doesn't seem correct either.
My config:
/dev/sda1 = 80 GB SSD drive, / partition.
/dev/sdb1 = 50 GB FAT32 partition of an external 500 GB USB hard disk.
/dev/sdb2 = remainder of the 500 GB USB hard disk encrypted using luks.
Screenshot: The /dev/sda1 figures don't really add up well, but they're close at least (how you get "50% Used" from any of those figures I don't know!).
However, for /dev/sdb2, they're miles off:
"Free" = 146.2 GiB
"Total" = 409.7 GiB
"Available" = 125.4 GiB
"Used" = 263.5 GiB
[Code]...
View 4 Replies
View Related
Sep 22, 2010
Well, turns out that when I rebooted into the installed system a user setup utility launched, but now whenever I try to log in as me, X crashes and GDM starts up again, telling me to relog in.
Now it's the case of "A setup utility launches and I set up my user, only to try to log in and get kicked in the face by GDM, having done all that work for nothing".
View 4 Replies
View Related
Apr 19, 2009
I just installed Fedora9 in my desktop. The installation was successful and it was doing security update and system update right after install. After all the update service finished, I do a manual update to see what happy (Sysem>Administration>Update System). It keeps coming up with Package Error with the message "failed to get a TID: Incorrect path with ';' returned!".
View 8 Replies
View Related
Jun 17, 2011
I randomly get system crashes of a fresh Fedora 15 install.
I cannot reproduce, however.
Where would I find information on system crashed (kernel panics)?
View 3 Replies
View Related
Apr 15, 2010
I was using Fedora 9 until about 1 month ago when my hard drive crashed. I installed F12 on a new hard drive last week. Due to some other software issues (empathy), I decided I should try to get the latest updates. PackageKit kept giving errors and would not update. So, I researched and found that I needed to run " su -c 'yum update' " for the first update then PackageKit would work. I did this and after about an hour of updating, the screen went black. Nothing you can do at that point but hard reboot.
When I did that, I could only get a "GRUB" command line. I played with it for a minute but really I have no idea what to do with GRUB cmd (beyond my experience level). So I decided to wipe it out and reinstall F12. I did that, and was just working thru the updates again. Same thing happened, went to black screen. I have not rebooted it yet, but Im sure when I do, it will be GRUB again. What in the world am I supposed to do with this? I am not a Linux star, but I have been using it for around 8 years now with various distros, so I would say I have at least moderate experience.
View 4 Replies
View Related
Jan 10, 2010
I love it but I have a problem that someone can hopefully help me troubleshoot. The system intermittently crashes, the screen freezes and nothing works except the mouse pointer which can be moved but not used. Is there a way for me to diagnose this
View 4 Replies
View Related
Feb 10, 2011
I wanted to replace the Nouveau with the proprietary Nvidia driver. I removed Nouveau and changed to console mode with "init 1". Realizing that i did not properly save the binary file i switched back to graphic mode with "init 5" only to have the system freeze. I rebooted and chose the usual kernel in the grub menu. The system continued to load but froze right after the Fedora logo (which hides the textual loading details) finished loading. I can not even switch to a console with ctrl-alt-F1.
View 4 Replies
View Related
Nov 1, 2009
FC11, 2.6.30.9-90.fc11.i586
Code:
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:invalid opcode: 0000 [#1] SMP
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:last sysfs file: /sys/devices/virtual/vc/vcsa2/dev
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:Process kswapd0 (pid: 22, ti=dfa28000 task=dfa20ca0 task.ti=dfa28000)
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:Stack:
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: 00000002 00000001 c117a740 c12f52a0 c103ba20 c103ba60 c103baa0 c110a600
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: c110a640 c110a6e0 c136f800 c10ebc40 c10ebc60 c10ebc80 c114e2e0 c114e260
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:Call Trace:
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048bf17>] ? shrink_list+0x24d/0x4e1
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048893d>] ? get_dirty_limits+0x1f/0x2e1
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c0423803>] ? set_next_entity+0xa0/0x10c
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c0402286>] ? __switch_to+0x78/0xfb
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c042c374>] ? finish_task_switch+0x8d/0xa7
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048c3c1>] ? shrink_zone+0x216/0x289
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048c8dc>] ? kswapd+0x369/0x51b
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048b14e>] ? isolate_pages_global+0x0/0x19b
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c044065d>] ? autoremove_wake_function+0x0/0x34
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c0422947>] ? complete+0x39/0x43
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048c573>] ? kswapd+0x0/0x51b
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c048c573>] ? kswapd+0x0/0x51b
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c0440365>] ? kthread+0x4b/0x6f
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c044031a>] ? kthread+0x0/0x6f
Message from syslogd@server at Nov 1 21:41:58 ...
kernel: [<c0403f87>] ? kernel_thread_helper+0x7/0x10
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:Code: f6 43 ea 01 75 24 8b 85 78 ff ff ff f6 40 08 40 0f 84 63 03 00 00 89 f0 e8 88 14 01 00 85 c0 0f 84 2d 03 00 00 bf 01 00 00 00 89 <f0> e8 db f0 ff ff 89 85 7c ff ff ff 8b 46 08 85 c0 78 2b 83 bd
Message from syslogd@server at Nov 1 21:41:58 ...
kernel:EIP: [<c048b90e>] shrink_page_list+0x1b0/0x56c SS:ESP 0068:dfa29d80
The semaphore timeout period has expired.
View 1 Replies
View Related
Mar 16, 2010
Due to the recent earthquake, Daylight Savings Time was extended to April 3rd, but my Ubuntu machine set its clock back an hour last weekend, which was when DST was originally set to end. I manually reset the time, but when I resumed from hibernate the clock was wrong again. How do I turn off synchronization until April 3rd? More importantly, who needs to be notified of the change to get the problem fixed?
View 5 Replies
View Related
Jun 13, 2010
I am using Kubuntu Amd64 Lucid on my desktop and I have allocated 08.03 GB partition for swap. But today I have noticed that system monitor is showing this as 09.90GB which is incorrect.
I tried deactivating the swap from KDE Partition manager. Even after deactivating swap it still shows the swap as 1.9 GB. So there is clearly 1.9 GB swap added to my system. I am not sure how. Attached screen shot clearly shows the system monitor issue. One possibility is, I have 4 GB (3.7 asper system) RAM comprising two units of 2 GB cards. Is this 1.9 GB read from one of these? I tried to boot the system from Kubuntu AMD64 live CD and then it showed only 8 GB as expected. So not sure whats causing this issue in my installation.
View 2 Replies
View Related
Oct 16, 2010
Today I have installed Linux SUSE 11.2 . At installation, I was asked for user-name and password. I edit this correctly.
At the end of the installation, the system reboots until the mask 'user name' and 'password' will be displayed. When I edit my user-name and the password the system said, that the login is not correct.
First, I think, I have forgetten my password an do a new installation of Linus SUSE 11.2 . Whatever, the same problem ist still there.
View 3 Replies
View Related
Mar 3, 2010
I have just bought a PC with SUSE 10.1-0. The first time I started the PC an installation menu appeared. I didn't define a user name, thinking that it should log in automatically (as in Windows occurs), but now I can't go farther from the Welcome screen, due to the system is asking me de user and password, but I didn't introduce nothing! Leaving username and password in blank didn't solve the matter.
I can see the admin screen (pressing F10) but I am not able to find any user to log (logically) and I can't include new users from there.
I have also tried to install Windows XP modifying the BIOS but the system returns a message (once in the WinXP installation program) about an error called 4096, about the file i386halaacpi.dll, which is unable to find (something about the HAL), so I am afraid that my (new) RAM memory is damaged.
What could I do? The system is for an old person, so I would like to install finally WinXP and delete Suse.
View 3 Replies
View Related
Jul 9, 2011
I have two ethernet cards eth0 and eth1:Where the internet is cable is conneted to eth0 I have another system i have connected a cable through eth1 to my second systems network cardnow i am able to access the internet on eth0 i.e.,on my first system ..ow can i share the internet which ius coming from eth0 to another system using eth1
View 4 Replies
View Related
May 30, 2010
See: [URL] The problem: Fedora 13 dosen't report the correct CPU speed of my Overclocked E2180. The correct speed, seen by Windows and openSolaris is 3.1Ghz. However, Fedora 13 (final) still dose not report it correctly.
However, today I downloaded linpack from here: [URL] and Linpack correctly state my CPU speed as 3.1Ghz: Btw, I have the pata_acpi module installed if that helps. I could not edit (even as root) the file at /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed. Even cpuid/cpuinfo and the GNOME CPU Frequency Scaling Monitor 2.30.0 reports the speed as 2Ghz.
View 11 Replies
View Related
Oct 6, 2010
I don't know how I've managed to mess this one up, but in the midst of securing my webserver (ie. changing default SSH port, add new user, disable root SSH) I seem to have broken su functionality....somehow.
When I ssh as my user "lockdown" I attempt to "su -" and immediately am prompted with "su: incorrect password"
Code: lockdown[ at ]bag [~]# su
su: incorrect password
lockdown[ at ]bag [~]#
I re-enabled root SSH login (via editing /etc/ssh/sshd_config) and I'm able to SSH as root no problem, however I can't su even from root to another user, getting the same behavior and error message..
Code: root[ at ]bag [~]# su lockdown
su: incorrect password
root[ at ]bag [~]# Here are my permissions for /bin/su ...
Code: root[ at ]bag [/]# ls -l /bin/su
-rwSr-xr-- 1 root wheel 28336 Feb 28 2010 /bin/su* My user "lockdown" is a member of the wheel group, and I haven't edit /etc/pam.d/su or system-auth at all.
View 4 Replies
View Related
Jun 2, 2010
Is there an actual How-To or something like it about sharing data between linux system(s) and MS Windows XP?I do not think there is a golden path but maybe a list of possibilities and their pros and contras would be fine. As I understood there are different ways of sharing data (and so of setting the partitions)
1. Accessing the data of a MS Windows (NTFS) partition from a linux system (contra: possible data loss/data corruption?).
2. Accessing the data of a linux (ext3) partition form a Microsoft system (XP) (contra: possible data loss/data corruption?).
3. Sharing a data partition (FAT ?) (contra: problems with large files).
4. Visualization (contra1: If the main system gets broken, the guest is broken, too?; contra2: not so easy?; contra3: windows male ware in linux?).
I am thinking about reorganizing my hole system of sharing data and of partitions (including my NTFS partition for XP data and FAT partition for data shared with XP and linux).Now I am using mostly a FAT partition for sharing data but this seems to me not the way (for big files and especially because of data security).
I thought of making my /home partition bigger and use a windows program to get excess to ext3/ext4 from MS XP. I also thought of deleting my hole NTFS data partition and use only /home with document-folders etc. for each user / for the linux users and for the Mircosoft users. But this seems not so wise jet from I have read (at least not with an ext4 data partition):
[all variants] ext4 support on Windows XP - Ubuntu Forums
Ext2read - View ext2/3/4 partitions from Windows
View 7 Replies
View Related
May 28, 2010
I am new to Linux and ave installed Ubuntu on my system along with Windows XP (Dual boot). I would like to find out if there is a way to share a database between these two operating systems.
Currently, I have a Microsoft Access database which I would like to use in either OS. I understand that Access probably won't work in Linux so I am willing to go to a different DB application as long as I can access it from both operating systems. Database is very simple. It allows you to input into an Access Form and then allows you to print a simply one page report based on the data just entered.
View 3 Replies
View Related
Jul 30, 2011
How to achieve interrupts
any sources available apart from kernel code which show the usage of code...
View 2 Replies
View Related
Oct 19, 2009
I've been using checkgmail package on my f10 (x86_64) box for a while now without problems. But all of a sudden, I see a pop-up windowtating: incorrect username or password. No matter how many times I enter my usernamend password the window keeps coming back demanding for the same. My system is up to date and I've rebooted my system a few times, but the problem persists.
View 2 Replies
View Related
Jun 3, 2010
Document viewer 2.30.1 in fedora 13 does not print pdfs properly. Xpdf is working. I printed the same pdf with document viewer 2.28.2 in fedora 12 without any problems.
View 3 Replies
View Related
Jun 26, 2011
I have a ubuntu 11.04 system and a lappy with window 7 system on it.I have got samba set up on the ubuntu system so that file sharing is enable between them.However,when I put my files in my samba share and access it from the window 7 laptop.I got some errors as per attach files.
View 15 Replies
View Related
Feb 7, 2011
I am not sure as to why but rhythmbox actually freezes the system. I am unable to get into another desktop by pressing control-alt-F1, F2 etc. I am not sure how to diagnose this problem. The window loads, and then the system just crashes. According to the software Manager I am using version 0.12.8-1.43
View 3 Replies
View Related
May 25, 2010
I upgraded not so long ago from version 9.10 to 10.04. What never happened before then started. I have system crashes all the time. When I play Solitaire, use Firefox and copy files.
I use ubuntu now for several years (at least since 8.04) and I never had a system crash before. I have a P5P800SE motherboard, a celeron 3.06 GHz processor and use 512 MB of memory. Ubuntu is installed under windows XP professional version 2002 service pack 3.
If not I will return to version 9.10 and wait for version 10.10.
View 2 Replies
View Related
Jun 7, 2010
I have an old PC in my basement that I decided to load Ubuntu onto a few months ago. I ran version 9 for a while and then recently upgraded to10.04.Unfortunately, I've been having issues with intermittent system crashes using both versions. Sometimes the computer will work fine for hours and other times it will crash 20 seconds after startup. I'll be able to provide much more information tonight when I get home but for now I wanted to plant the seed in the forum and see if anyone has any ideas.The computer will be working fine and then all of a sudden the screen will go black and then start blinking, switching between a blank screen and a blank screen with a bunch of tiny white squares/lines. When I restart, things seem okay again.
View 6 Replies
View Related
Aug 21, 2010
I installed Ubuntu 10.04.1 yesterday, and I've been trying to install my nvidia 240 drivers for it. I've done this multiple times on 9.## and it worked fine. When I try to install them it says i need to shutdown xserver. so I open terminal and type sudo /etc/init.d/gdm stop screen goes blank and all there is is a flashing _ at the beginning. I'm not able to anything except type, but no commands work.
So, I tried starting it up in recovery mode root shell or whatever, and it shows the command prompt. Then I login, and it says welcome, I go to my downloads folder and type sudo sh NVIDIA...256.44.run and it says I need to be in telinit 3, so I get out of the installation and type sudo telinit 3.well that brings me up to a login command so I type my username then it askes for a password, which I also fill in.Now it says incorrect login. So I try again, and it keeps going on, but then I noticed that it puts the first letter of my username infront of Password.And the only way I can get out of that is by Alt + Ctrl + Del to restart, same when I shutdown gdm.
View 6 Replies
View Related
Feb 11, 2011
10.04 Ubuntu / Gnome My system has just started crashing back to the Gnome login screen. Tried removing recently installed packages, as well as the repair broken packages from login screen.
View 1 Replies
View Related
