Fedora :: Removal Of Nouveau Driver Crashes System After Boot?
Feb 10, 2011
I wanted to replace the Nouveau with the proprietary Nvidia driver. I removed Nouveau and changed to console mode with "init 1". Realizing that i did not properly save the binary file i switched back to graphic mode with "init 5" only to have the system freeze. I rebooted and chose the usual kernel in the grub menu. The system continued to load but froze right after the Fedora logo (which hides the textual loading details) finished loading. I can not even switch to a console with ctrl-alt-F1.
View 4 Replies
ADVERTISEMENT
Jan 12, 2010
I just installed F12 over a former F9 system. I have a a nvidia TNT2 card. Formerly it was using the nv driver, which I understand has been replaced by the nouveau driver. Specifically this is what is reported in Xorg.0.log
Code:
The install ended up with a xorg.conf setting the driver to vesa. I presume this is because the standard install/upgrade option did not work and I had to install using the "basic video driver". Since I used this system to watch DVDs, the vesa driver does not work for me (too slow). So I tried removing the xorg.conf and followed these instructions for unsupported nvidia cards in order to try to get the nouveau driver working.
This failed. I I got was a black screen with a cursor following the mouse. Checking the Xorg.0.log I see the nouveau crash dump listed below.
I checked for fedora bugs, but I saw nothing like this one. I can't watch DVDs on this system at this point.
Code:
Backtrace:
Fatal server error:
View 5 Replies
View Related
Nov 3, 2015
Recently I bought the next notebook: Asus R510JF-DM020 i7-4720HQ
My hardware (extend ouput):
Code: Select all$ inxi -Fzx
System: Host: Asus-R510JF Kernel: 4.2.0-1-amd64 x86_64 (64 bit gcc: 4.9.3)
Desktop: KDE Plasma 5.4.2 (Qt 5.5.1) Distro: Debian GNU/Linux stretch/sid
Machine: Mobo: ASUSTeK model: X550JF v: 1.0 Bios: American Megatrends v: X550JF.203 date: 04/02/2015
CPU: Quad core Intel Core i7-4720HQ (-HT-MCP-) cache: 6144 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 20751
[Code] ....
View 2 Replies
View Related
Nov 6, 2010
I have a machine running FC 13 and a GeForce 210 Graphics card. I'm running the 2.6.33.3-85 kernel (if I use the newer kernels like 2.6.34.7-61, and 2.6.34.7-56, the X server won't even start; that was the subject of a different thread which didn't get answered). After a few hours, the screen is displayed in a disorganized state: each quadrant is displayed in the wrong space, and the X server won't respond to mouse movements (this isn't a screensaver). This is different from a previous problem where the X server simply hangs after an hour of so when I use GUI programs (that was also the subject of a different thread which didn't get answered). I think I'm running the Noeveau video driver, but not sure.
View 3 Replies
View Related
Feb 17, 2010
I am running F12. With prior kernels - 2.6.31.9-174.fc12.i686 or before - I could simply rename the nouveau.ko driver to nouiveau.ko.bad. Then the kernel would load the nv driver instead, and everything worked great. FWIW: adding rdblacklist="nouveau" to the kernel params in grub.conf didn't seem to do anything.
On a recent update, a new kernel was added: 2.6.31.12-174.2.19.fc12.i686. I did the same rename trick as before, but this time the kernel still loaded the nouveau driver, and then X failed to load. So I had to fall back to the older kernel.
Is there a way to keep nouveau from loading with the newest kernel (ie, the one above)? And also, is there a way to keep nouveau from loading for any new kernels?
View 1 Replies
View Related
Feb 9, 2010
After updating X-Windows (via yum auto-update) I'm having a serious X-Windows problems when using the nouveau video driver. I had to switch over to the vesa driver to be able to start X-Windows. Below you find the Xorg.log file:
Code:
X.Org X Server 1.7.4.902 (1.7.5 RC 2)
Release Date: 2010-02-05
X Protocol Version 11, Revision 0
Build Operating System: x86-06 2.6.18-164.6.1.el5
Current Operating System: Linux localhost.localdomain 2.6.32.7-37.fc12.i686.PAE #1 SMP Fri Jan 29 14:37:28 UTC 2010 i686
Kernel command line: ro root=/dev/mapper/VolGroup-lv_root LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYBOARDTYPE=pc KEYTABLE=be-latin1 rhgb quiet rdblacklist=nouveau vmalloc=512MB .....
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
Please consult the Fedora Project support at [URL] for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(II) NOUVEAU(0): NVLeaveVT is called.
View 3 Replies
View Related
May 27, 2010
I've noticed in many versions of Fedora is that the blue colors don't seem so right. They appear more like violet in comparison to the Nvidia proprietary driver.I've tried playing with the new color profiles in F13 but none of them fixed this particular problem
View 8 Replies
View Related
Nov 4, 2010
I have two monitors - one connected to the VGA port and the other to the DVI port. Fedora seems to be detecting both monitors (figured this out because when I rotate the desktop cube, the second screen is also seen.). However, the monitor on the DVI port is blank. This happens even if I use just one monitor with the DVI port. I cannot install the proprietary nvidia drivers because my computer hangs (has been happening since fedora 11 or 10), Is there a way to get both monitors to work with the nouveau driver?
I faced this problem in Fedora 13 as well and was hoping both screens would work out of the box in F14. Is there any way I can do this to make it work like nvidia's TwinView?
View 7 Replies
View Related
Nov 12, 2010
Fedora 13, x86_64, up to date. Trying to get nVidia Quadro NVS 140M to display on a projector the same as it does on the laptop screen, which is 1680 x 1050. I failed to do so with the nVidia driver (latest version), so I want to go back to the nouveau driver and try with xrandr. I have always used the nouveau driver with Fedora without an issue, but in my former life in Ubuntu I sometimes switched back and forth between the "nv" driver and the nVidia driver.
Doing so was trivially easy - just edit xorg.conf replacing "nv" with "nvidia" or vice-versa, then restart X. However, after installing the nVidia driver via Yumex and using the nVidia config utility, I find that now I have an xorg.conf file that is loaded with stuff I don't understand, except that at the top it says it was created by nVidia, and there are two places where it says the driver is "nvidia." I have searched and all I can find is instructions for installing the nVidia driver.
Apparently that is meant to be a one-way ticket, because I can't find any instructions for how to return to the nouveau driver. Except stuff that is over a year old, and complaints from users whose systems failed to start X. What would happen if I just replace "nvidia" with "nouveau" in the xorg.conf file and restart X? I know if it won't start X I can boot to rescue mode and re-edit xorg.conf, but I'd rather ask first and do it the right way than have to repair a broken system.
View 10 Replies
View Related
Jan 18, 2011
I installed the nvidia driver from the vendors homepage. But since it does not support regulation of brightness (and the display is that bright that I want to downlevel it), I wanted to go back to the default display driver which is the nouveau driver.So I uninstalled the nvidia driver and then I realized that I didn't make any backup of the xorg.conf file prior installing the nvidia driver. Shame on me, yeah.Now when the x-server started, it couldn't find the nvidia driver. Okay, fair as it was removed. Next to that my keyboard becomes unresponsive. That's really aching as I can not switch to a text-based console any longer.I'm able to boot into initmode 3 by editing the kernel parameters in the boatloader. I'm also able to edit the xorg.conf with vi in the shell then and start the xserver to test things by calling xinit.
I already tried to recover a bit from this situation by removing the references to the nvidia driver and replaced it with some information I could find on the nouveau homepage - but no luck so far, keyboard still freezes and login window does not appear. I could take a look into the xorg.0.log which warns me about the keyboard getting disabled but I do not really understand why. Next to that I find some other additional information. My computer experience is quite okay, but I'm somehow new to Fedora, I started half a year ago with Fedora 13 on my other laptop which worked like a breeze.
I wondered where I can find information about how to configure the xserver in the default configuration, if there is some reset functionality or so, that brings me back to installation defaults. Those worked ok for the nouveau driver. Unfourtionatly I was not able to gather the correct package name that would probably had helpded me by removing and installing it again.Next to fixing my setup, I had another idea as this is a quite new install to just re-run the install again on to that machine. Is this possible with keeping the files in my homedir?
View 9 Replies
View Related
May 29, 2011
I am having a problem with the nouveau driver in Fedora 15 Code: lspci | grep VGA 40:00.0 VGA compatible controller: nVidia Corporation NV41GL [Quadro FX 1400] (rev a2) The problem is that when I boot a Fedora 15 live Cd, either gnome or xfce, the monitors initially seem to work in that they display at the proper resolution, both as the CD boots and as X initially starts. I can see the background and the mouse cursor - it is "busy" ...
As the desktop finishes loading, however, my primary monitor becomes disabled. With gnome the screen goes black, with xfce it goes white. I can still see the mouse on my secondary monitor, but I can not seem to open any applications (such as a terminal) or change to a console (ctrl-alt-F1 or ctrl-alt-F2). I can boot into safe mode. Adding the boot option video=xxx sets the resolution on the console as it boots, but does not help running X.
View 1 Replies
View Related
Nov 26, 2010
First some specs:
Fedora 13 (Goddard) 32-bit
NVIDIA GeForce GTX 260
The DVI output on my card works just fine to my monitor, which is what I've been using. I installed no drivers; it just worked. However, now I need a duplicate screen to be given via the s-video output, but it doesn't work. Nothing is being given to the tv and nothing is being detected under monitors. From what I understand, this is because I need to install the appropriate Driver.
I downloaded my driver from the nvidia website, but it won't install. it tells me I need to disable nouveau.
View 9 Replies
View Related
Apr 2, 2010
I read that the Nouveau Gallium3D driver will work with Nvidia cards in Fedora 13 (YAY!)What I was wondering is this - will the driver work in 12 or will I need to get 13?
View 14 Replies
View Related
May 9, 2010
Sound was working until I tried to install a rawhide version of Nouveau which hosed my system.Backed out to where I started and the sound is gone.The hardware is not showing up in the System> Preferences> Sound.I reinstalled alsa and pulse audio.
Code:
lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
[code]....
View 1 Replies
View Related
Jun 18, 2010
I am using an Nvidia GeForce FX5200 card and nvidia hasn't released a driver that seems to work with it in Fedora 13 yet.. However, I decided to do an install of F13 and use the nouveau drivers until Nvidia updates their drivers, however, the nouveau drivers don't work worth a crap with my card I did a fresh install and then ran a yum update. What I am seeing is after a few minutes, all the icons disappear, no fonts, and nouveau starts throwing errors to my message log. Here are the messages I get:
[Code]...
View 2 Replies
View Related
Jan 13, 2011
I'm using a remix of F14 called Fusion Linux. It's all the same as fedora14. It's come preinstalled with xorg x11 nouveau driver. So, i'm not using Nvidia driver. Now, the problem is that the graphics in wine application are really poor. Fonts appear to be really hazy. See this image to get me better: [URL].. In earlier version of fedora and wine, i used nvidia driver. Graphics used to be good at that time.
View 6 Replies
View Related
Oct 17, 2010
I had installed my NVIDIA 9500GT driver on my fedora 13 by disabling nouveau, so should i enable it back after installing NVIDIA driver?
View 2 Replies
View Related
Jun 7, 2011
Can this be done similar to some other O/Ses so Nouveau doesn't pre-screw up the kernel for 3rd party drivers??? Would be great in F16 if we were given a choice re: wanting nouveau or not. I simply can not get F14 or F15 to work with the 270.xx drivers on recent equipment.
View 10 Replies
View Related
Apr 26, 2011
Nouveau won't go away.I done the rdblacklist in grub and blacklist in modprobe.d but it still persists.Is there something else I need to for Fedora 15?
View 7 Replies
View Related
Jun 13, 2011
There is one thing missing (I think) a clear guide to clearing out Nvidia and replacing it with nouveau. For all but hardened gamers, nouveau on 11.4 delivers. It also removes one more barrier to what I think is the intended goad of Tumbleweed.The problem IMHO is not that there are no clear guides. The problem is there are too many. No sooner does one person do a guide (that is clear) and someone else who does not like some point writes another guide that they think is more clear (but in fact is less clear in other aspects). And this goes on ad infinitum.IMHO we have too many guides - many of which are sufficient clear ... but the VAST number only serves to confuse users more.
Having typed that, IMHO this is NOT a Tumbleweed specific issue, but its MUCH WIDER in scope and hence does not belong as a discussion in this Tumbleweed thread.
View 9 Replies
View Related
Nov 17, 2010
I have a native 64 bit 11.3 system with vmware 7.0x as an application. I have installed a win 7 guest which works fine 99% of the time. But if I try to plug usb headphones into my system after I boot win 7, it will crash entire system, but if I plug headphones into system before loading vmware, this does not happen. Is this a kernel issue?
View 1 Replies
View Related
Sep 5, 2010
When I was installing the last kernel update, the system informed me that I had to remove the kernel that was 2 back. The new kernel wouldn't boot and I reported the bug via bugzilla. I got a response within a day that a new kernel had been posted on koji and I was aked to try and see if it resolved my problem. When I installed it I was again forced to remove the kernel that was 2 back. This left me with only 1 known working kernel and if this new one hadn't worked, another attempt would have put me out of business.
What enforces this apparent rule of only 3 kernels. I upgraded from F10 to F13. F10 would let me keep as many kernels as I wanted and I could clean up old ones when appropriate. How can I disable this? I really need to be able to keep several kernels on the system at any given time.
View 4 Replies
View Related
May 26, 2011
Just downloaded the x86_64 iso, copied it to my USB stick and added a grub4dos entry for direct booting.
Code:
title Fedora 15 x86_64
find --set-root /linux/fedora64.iso
map /linux/fedora64.iso (hd32)
map --hook
chainloader (hd32)
[Code].....
While it does mention nouveau, and I do use Nvidia graphics (PCIe GT 240) I believe the cause may be something else. Googling around leads me to a couple of forum threads that seem to relate to the core series of Intel processors, but I'm at a loss. I've also searched this forum however the search seems to either bring up every result under the sun and non seem to apply or no results at all. I know the card's supported as Ubuntu works flawlessly. I also tried booting in safe graphics mode, however the exact same thing happens.
I doubt using a USB stick in this manor would cause this problem, but if you suggest it i'll install from physical media.
I would post logs, however the shell it drops to seems to be severly limited (lacking reboot, even).
View 3 Replies
View Related
Apr 4, 2011
I am new to opensuse, having migrated from Ubuntu. I have had some difficulty with power management on Ubuntu so i decided to install opensuse with kde as i heard it was good for laptops. I have had lots of trouble getting opensuse 11.4 to boot properly and to run without freezing.
I have trawled the forums and bugzilla and the documentation, e.g. SDB:ATI - openSUSE and SDB:Configuring graphics cards - openSUSE. Consequently i am now able to boot (normally), however whenever i open any application, e.g. Dolphin file manager, Firefox, etc, the tab starts to load (little circle starts spinning on the tab), and then it freezes.
At this point I can exit X Windows and enter the text mode. I have repeated this with the FGLRX and Radeon drivers running. This is always repeatable. I can also boot into level 3 and do things there.
My computer details are:
HP Pavilion dv6 3032TX
Processor - Intel i7 720 QM
Ram - 6GB
GPU - ATI Mobility Radeon 5650
Harddrive - 640GB 5400rpm
[Code]...
What i have tried so far:
1. First 4 steps on SDB:Configuring graphics cards - openSUSE
2. Install and run FGLRX
Note that i cannot failsafe boot - it never boots into X Windows and just hangs. I really do like the look and feel of opensuse and would love to use it, but at this point my only option is to try another distro.
View 3 Replies
View Related
Nov 3, 2010
I installed Fedora 14 in (Basic Video) mode. How to do i enable nouveau?
View 4 Replies
View Related
Nov 30, 2009
As I mentioned before, I has having freezes while installing F12 (x86_64) with a GeForce 8600 GT. I was able to complete the installation by doing it with the "basic" video driver. However, I was still getting frequent freezes. I installed the testing Nvidia drivers, and the freezes went away. When it froze, it was a hard freeze -- it wouldn't respond to CTRL-ALT-DEL or SysRq (I did enable SysRq first). I had to do a hard reset.
View 7 Replies
View Related
Jun 16, 2010
I installed the nVidia 3rd party driver before removing the Nouveau Driver, this means that when my computer is done booting i'll just have a black screen, being able to do nothing. Can i somehow solve this using a live CD? or is there a simpler way? Ubuntu can't boot in recovery mode neither, so it kinda sucks. Anyway, i'd like someone to tell me how to do this.
View 9 Replies
View Related
Feb 17, 2011
I've started playing around with debian 6 stable, and was just wondering if its worth it to go to the trouble of removing nouveau, or if it will handle everything well enough. I use my laptop for a little bit of gaming (older games) under wine, all the basic email/web browsing/writing stuff, some photo editing under gimp, movies/music, and a very little bit of Blender work.Will Nouveau handle all this well enough, or should I use the proprietary nvidia driver?
View 6 Replies
View Related
Mar 28, 2011
I have tried everything I can think of to install the nouveau driver, which is the only one I can trust on my system with the Geforce 8800 card I received as a gift. I tried Nvidia direct download drivers before and it was impossible to alter the screen resolution and the "fixes"/patches were not able to correct that fact. And removing it led to my having to reinstall my system both times. So I'm done with those.
I realized that I could use the nouveau driver when I realized that the second OS on my dual boot system worked perfectly with it. It has the nouveau driver onboard. That OS is Ubuntu 10.04, btw. Also the system I want to install this driver on requires a screen resolution of 1280x960. The Ubuntu is at 1280x1024 for some reason, with the same monitor, it works.
How do I get my stable debian system to download the xserver-xorg-video-nouveau and meet all its dependencies without breaking my system? I even tried reloading Synaptic with the highest available software, but I still could not get the driver to install. What am I doing wrong? Is it just impossible to install this particular driver on my system? And if there's an old version of it I am willing to try that too.
View 6 Replies
View Related
Jul 16, 2009
My F11 x86_64 machine has regularly been crashing at boot up. I removed broadcom-wl and installed ndiswrapper, now the crashes seem to have gone.
I wonder if anyone else has noticed issues, I have this Broadcom wireless model:
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
View 3 Replies
View Related
