Fedora Hardware :: No USB Devices Working Except With LiveUSB?
May 31, 2010
All USB devices do not work/initialise, except when I run Ubuntu 10.04 liveUSB (netbook version). The problem arose following upgrade from Ubuntu 9.10 to 10.04, but only manifested after a couple of weeks. I've tried other distros and the problem persists in Fedora 13 which I am now using.
Output of lsusb with a USB memory stick and mouse in the ports is:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]...
View 6 Replies
ADVERTISEMENT
Nov 4, 2010
I've installed the XFCE iso of Fedora 14 (the 64x edition) onto a 4 gig flash drive. When I try to boot from the drive, a command-line (BIOS?) interface pops up with the following text (no prompt).
Code:
It hangs there without going any further. I'm currently downloading a different version of Fedora 14, so maybe it's just a bad install. Or maybe this is something that I should have encountered before. Any ideas on how to get it booted up?
View 6 Replies
View Related
Nov 1, 2010
Today I installed starDict in my Fedora LiveUSB, after I reboot machine. The system backtrack the original one, and then I update the kernel, the system also backtrack.
Why LiveUSB have this function. Can you explain theory about LiveUSB.
View 2 Replies
View Related
Nov 3, 2010
I have a 4GB USB Flash Drive that I would like to install Fedora 14 Live on.
Process:
Downloaded the Fedora 14 i686 Live ISO file Used the Fedora LiveUSB Creator on my USB with the Fedora 14 ISO
I changed my BIOS on my Dell Inspiron E1505 to boot from a USB, then CD-DVD ROM, then Internal HDD Had USB inserted, then turned on computer.
Received the following message:
And then it sticks. I've found two other internet sites that have had this problem. One is in chinese, the other is in french. I know french, but the 'solution' was not clear.
View 14 Replies
View Related
Aug 20, 2010
I am installing in Kubuntu (I cant stand ubuntu anymore) But when i try to use dd to install to a USB, I cant because Ubuntu got rid of the root and when i sudo it, It doesnt seem to work!
Here is the message i get:
View 10 Replies
View Related
Jun 4, 2011
I'm quite keen to get Fedora 15 up and running but I am falling at the first hurdle. I can successfully boot from a LiveUSB and be presented with a text only tty2 / tty3 / tty4 / tty5 interface inviting me to log in but no graphics are possible and I cannot see any way to install Fedora. I have GMA500/Poulsbo graphics chipset which has notoriously **** Linux support but I note that basic support has been inlined in 2.6.39 so I think that if I could only get Fedora installed and then upgrade the kernel or do other things later I will be ok.
View 3 Replies
View Related
Oct 31, 2010
not a ubuntu issue, and I tried it with UNEBOOTIN both on win7 and ubuntu... I can't make a bootable liveUSB with those. It either has a blank screen when booting through USB or it says some error occured... Any other known way to make one? I do not have an optic drive.
View 1 Replies
View Related
Jun 9, 2009
I booted into the Fedora 11 on my netbook, and used the desktop icon to install to hard-drive. I specified to use "Free space", and hit next. From there, it just stalls. The "Install Fedora" window does nothing, and I'm going on a half-hour now of nothing.
Tried three times, still nothing.
The first time I tried, I chose to replacce old linux installation (ubuntu), and when I told it to install Fedora 11 root as ext4, it said the boot can't be ext4... so I chose ext3 and it said root device must be ext4...
View 3 Replies
View Related
Aug 30, 2011
I tried doing a fresh install of F15 today on my computer, and I have a problem. When I try to install to hard drive, I get as far as choosing storage, then it examines storage devices and closes. I get an error that says a package has crashed. (I would post it up, but its not notifying me anymore)
View 2 Replies
View Related
Mar 23, 2009
I have the following trouble when I try to install Fedora 10 with a USB Flash Drive created by Fedora LiveUSB 3.6.3 [url]...ator-3.6.3.zip in a HP Mini-Note 2133 Notebook.
Everything looked ok during install, restarted the PC, get the booting count down and splash screen.
After some seconds then get this:
View 1 Replies
View Related
Nov 20, 2009
I've created an LiveUSB disk with the USBcreator method in Windows 7.Now the the image is copied succesfully and the USB key is bootable.However when the boot window popsup and I select the verify & boot option, a graphical loading window comes up and right after that the system halts with the error message "Sleeping forever".What am I doing wrong? Or what is Fedora doing wrong with their LiveCD to USB media?I've did a forum search and the exact same issue is described in this thread[URL]
View 5 Replies
View Related
Jun 14, 2011
I'm trying to install Fedora 15 from a USB stick. I can boot off it just fine, but most of the menu options don't work:
Boot => Freezes indefinitely
Boot (Basic Video) => Freezes indefinitely
Verify and Boot => Freezes indefinitely
[code]...
View 1 Replies
View Related
Aug 30, 2011
Im trying to install ubuntu 11.04 over my current fedora 15 due to lack of compatibility with my itouch 4g.
Heres the steps i take:
Open LiveUSB-creator.
Point to .iso file for 11.04.
Select proper device
Then it gives me an error like so:
There was a problem executing the following command:
A more detailed error log has been written to '/tmp/liveusb-creator.log' ISO MD5 checksum verification failed.
View 4 Replies
View Related
Jun 19, 2010
For some reason my USB devices just stopped working. I'm on my laptop, so I really don't need a USB Mouse but I like to use it. I also can't use my flash drive. The Command lsusb sees it. It will see both the mouse and my flash drive. I don't have any other devices to test, but I would like to know that they would work when I need them. The strange thing is it also used to work. I don't know what changed.
View 9 Replies
View Related
Mar 9, 2010
I had XP before, which gave me an error message and crashed. I didn't have the XP CD so I decided to give Linux an error. By what i can find, I have a somewhat unique problem. My USB drives no longer work. They light up green, so they obviously have some power and so on, but there is no response from any devices that you plug in, i.e. mouse, flash drives, etc. Nothing works.
View 1 Replies
View Related
Jan 8, 2011
Im running Ubuntu 10.10 and a couple of days ago, my usb sound deviced stopped working, possibly because of a recent update, as I didn't change something on my system as far as I can recall.My internal sound card still works just fine whatsoever, but my external devices,
E-MU 0202 USB
Logitech USB Headset
which also used to work flawlessly in the past, don't play audio anymore.Although they are still detected and selectable in the PulseAudio Volume Control.I can exclude hardware problems because everything is fine in WinXP.
View 2 Replies
View Related
Mar 29, 2010
When I installed slackare 13 it detected usb drives and cameras automaticallyow it doesn't. I am runnning a 13.0 system, not current, so I have only applied the updates in that branch (iirc including a new kernel).nowadays when i plug a device in it does not seem to be detected by HAL (i.e not in KDE).However the device is listed if you use the command "lsusb" and the computer obviously knows it has been plugged in as there is a relevant entry in dmesg.Sorry for the generallised nature of the post, but I don't really know anything about HAL or how it can have stopped working
View 1 Replies
View Related
Feb 5, 2016
I have problem with several usb devices plugged to laptop HP Envy 17 n120nd, new laptop with Skylake. Because of the Skylake I have Debian Testing installed (instead of Windows, hence no dual boot). The problem is as follows. When I plug an usb device such as memory stick, usb storage and wired mouse, none of them are detected, despite the fact that lights of these devices are on (except the mouse as I will explain later).
But when I reboot the laptop, while the usb devices stay plugged in the laptop, then they usually are detected (hence not always) and works without problem. Except the mouse: after completing the reboot the light of the mouse went off, indicating that there is no power. Replugging the mouse results in power for the mouse and it works like a charm too.
What can be the cause? And, maybe more important. I contacted HP, but they give no support for Linux.
View 14 Replies
View Related
Oct 21, 2010
I am running Ubuntu 10.10 on Hp Mini 110. I can't get Mobile Broadband to work ... whenever I plug a USB device in, nothing is detected and there is no option to connect to mobile broadband. The devices I have tested are;
1. ZTE MF636
2. ZTE MF626
3. Huawei K3565-Z
4. Nokia 5800XM phone in PC Suite Mode (works on my other laptop running Ubuntu 10.04)
I have tried uninstalling with a full purge of USB-Modeswitch and then reinstalling it. This machine is upgraded from 10.04. It wasn't working in 10.04 either.
View 9 Replies
View Related
May 12, 2011
I am using Ubuntu, now installed KDE (kubuntu) and I have Bluetooth working and enabled but for some strange reason the bluetooth scan is not finding any devices in spite of the fact that I have my mobile phone with bluetooth on and discoverable. My laptop is HP Touchsmart tm2 2102tu. Here's output of my hciconfig -a
BD Address: 70:F3:95:74:7D:CE ACL MTU: 310:10 SCO MTU: 64:8
UP RUNNING PSCAN ISCAN
RX bytes:1099 acl:0 sco:0 events:42 errors:0
[code]....
Neither hcitool scan nor scanning with Gnome or KDE bluetooth settings is working for me.
View 9 Replies
View Related
Nov 18, 2010
Booting up this morning, no problem. But I accidentally let my laptop go into suspend mode, which doesn't work, so I had to force a restart (Suspend mode on my laptop won't allow me to wake it up again). Now, on rebooting, X doesn't work. I usually boot to RL3 then use startx. Now it just flashes the screen then gives me this error -
Code:
(EE) Error compiling keymap (server-0)
(EE) XKB: Couldn't compile keymap
XKB: Failed to compile keymap
Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config.
Fatal server error:
Failed to activate core devices .....
Fatal server error:
Failed to activate core devices.
Please consult the The X.Org Foundation support at [URL] for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. If I su - to root and then do "init 4", I get to xdm, and I can log in. X then starts, but with no sound, wrong keymaps, launchers not working; all sorts of things wrong. If I startx as root I get a normal desktop. I have tried copying root's xinitrc to /home/spoovy, but makes no difference.
View 2 Replies
View Related
Dec 2, 2010
I'm no expert on DHCP. My problem is that i have a CentOS 5.5 server on which i want to install a DHCP server. I have two NICs where eth0 has access to the internet and where eth1 should act as an DHCP server.
I have installed dhcpd and this is how my dhcpd.conf file looks like.
Code:
ifconfig looks like this
Code:
When i start dhcpd on eth1 i get no error messages but when i connect any devices to eth1 they don't get any IP. I cant find anything in any logs about devices trying to get an IP address. I dont have any firewall rules in iptables.
View 4 Replies
View Related
Oct 31, 2010
Where did they hide System->Preferences->Hardware->Removable Devices in Fedora 13?
View 7 Replies
View Related
Jun 11, 2011
I managed with fstab but at restart came a black screen.I have called an HD '7200' then I reinstalled Fedora. And it does not automount it anymore. I changed fstab and black screen.
View 5 Replies
View Related
Aug 6, 2010
Something very strange has happened. For some reason when I plug in a USB device into my F12 rig up pops a error saying,Code: Unable to mount <name of device> file systemNot Authorised When I try to mount from the CLI I get, Code: mount: can't find /dev/sdb1 in /etc/fstab or /etc/mstab I'm not really sure what this is telling me or what I need to do to fix it.
View 4 Replies
View Related
Dec 30, 2010
I use my Ubuntu LiveUSB (LiLi USB Creator) on various machines and everything works perfectly.
Though, even though I got the NVidia driver to work properly on my laptop, the "Desktop Effects" keeps getting turned off it seems.
For Compiz to work, I have to go to System - Preferences - Appearance and tell it Extra affects and Compiz will turn back on, though losing all settings.
Is there a reason Compiz and Desktop Effects are not getting persistence when every other part of the system has it?
View 3 Replies
View Related
Jun 6, 2011
I just downloaded a new copy of Ubuntu 11.04 and burnt it to a disc and made a LiveUSB. But whenever I try booting from the USB it starts loading, then goes into a black screen with a bunch of text. My computer booted from a live USB before and it worked.I have an Aspire 5552 if the helps and the USB I am using is a 4GB SanDisk Cruzer.
View 2 Replies
View Related
May 3, 2010
How to create LiveUSB using Linux?
View 3 Replies
View Related
Dec 7, 2010
I'm working on a server and noticed that the to RAID5 setup is showing 4 Raid devices but only 3 Total devices. It's on a fully updated CentOS 5 system that only has three SATA drives, as it can not hold anymore. I've done some researching but am unable to remove the fourth device, which is listed as removed. The full output of `mdadm -D /dev/md2` can be see below. I've never run into this situation before.Anyone have any pointers on how I can reduced the Raid Devices from 4 to 3? I have tried
mdadm /dev/md2 -r failed
mdadm /dev/md2 -r detached
but neither work and since there is no block device listed I'm not quite sure how to get things back in sync so it's only seeing the three drives.
/dev/md2:
Version : 0.90
Creation Time : Tue May 25 11:07:04 2010
Raid Level : raid5
[code]....
View 8 Replies
View Related
Jun 12, 2009
After the usual mild annoyances inseparable from a Fedora release (installation from the LiveCD worked OK, but generated a requirement for 162MB of day-one updates, followed by something like 150MB of downloads to install OpenOffice - which comes as standard with Ubuntu/Mint/Mandriva and, no doubt, many other distros) I have been able to get the system working reasonably well. If there are major performance gains from the use of ext4, I have been unable to detect them. However, the only really frustrating issue from my perspective has been the difficulty in getting my two printers (both of which worked straight out of the box in the other distros mentioned above) to actually print. The devices in question are a Brother 2140 laser printer and an HP 2280 multi-function inkjet.
Both of these devices were properly recognised by the system, but neither would actually print (there were some initial signs that action was imminent, but no result - the printing processes were finally shown as having been stopped). I removed both printers, and started from scratch. The laser printer could not be persuaded to work, either with the recommended 2170 driver or the old faithful 2060-gutenprint driver. However, when I tried to add the HP, the printer utility advised that I needed to install "hpijs" before proceeding. This I duly did, and the HP 2280 then worked fine. On the basis that my only aim was to get the printers working, I decided to ignore the recommended drivers for the Brother 2140, and select the "2060-hpijs" version. This worked fine, and others may like to try this workaround.
View 5 Replies
View Related
