Fedora Hardware :: F15 Failed To Update Nvidia Driver From 270 To 275
Jun 21, 2011
Lately I tried to update my nvidia drivers from RPFMFusion repos. There was a new version 275 available, so I installed it. After a reboot I would repeatedly see the Nviia Logo followed by black followed by a glimpse at the CLI with some error message. This process continues over and over again and it is so fast that the only thing I could make out from the error message is the following:
at-spi-bus-laun[some-number] segfault at 980 ...
in libx11.so.6.3.0 ...
I tried completely removing the driver then updating my system (there were no updates) then booting with nouveau to see that that actually works. Then I tried reinstalling the nvidia driver following leigh's guide [URL]. Same error.
This is where I'm stuck at the moment. Booting to runlevel 3 I had a look into the messages and Xorg.0.log, but I didn't see anything. Maybe I can get the log files uploaded.
I will boot from live media and provide them later on.
Hardware specs:
Samsung P480
Intel corei3 330
nvidia GT330M 1024mb
8gb Ram
120gb SSD OZC Vertex 2 with /tmp mounted as tmpfs
Software specs:
Using F15 x64
kernel 2.6.38.8-32 (from the top of my head, please don't shoot me)
added repos:
RPMFusion
adobe (flash)
playonlinux
There is one addition I can make. Before, when I was using the 270 driver, I tried playing some games via wine and that also segfaulted on me (most of the time - 1 worked), so I think there is a general issue with the nvidia drivers on my system. But back then It was only wine, not X.
View 9 Replies
ADVERTISEMENT
Feb 17, 2010
I`am trying to install drivers for a very old graphics card GeForce2 GTS/Pro on Suse 11.2. I downloaded driver NVIDIA-Linux-x86-71.86.13-pkg1.run and install it successfully. But when I launch "sax2 -r -m 0=nvidia" it crushes with error "isax: could not import file: /var/cache/sax/files/config at /usr/sbin/isax line 199"
[Code]....
View 9 Replies
View Related
May 8, 2009
I am using fedora10 in my notebook. I installed nvidia-graphics driver as follows.
su -c 'rpm -ivh http://download1.rpmfusion.org/free/...ble.noarch.rpm'
su -c 'rpm -ivh http://download1.rpmfusion.org/nonfr...ble.noarch.rpm'
su -c 'rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rpmfusion-*'
Then i installed kmod-nvidia with yum su -c 'yum install kmod-nvidia' When i tried to open NVIDIA control panel, i got a message that nvidia-driver should be configured. Then i issued the following command as root.
nvidia-xconfig. The i rebooted the system. Now in the boot menu, i see two kernel informations as follows
Fedora (2.6.27.21-170.2.56.fc10.i686)
Fedora (2.6.27.5-117.fc10.i686.PAE)
If i boot my linux with first one, x windows starts, if i boot with the second one (previously default), the x-windows is not opening. Why this happens? So i booted my system with first option in the boot menu. The system booted and x.windows started but i am not able to use any software that uses opengl window. The glxinfo command gives me the following error.
[Code]....
View 3 Replies
View Related
Mar 11, 2010
I updated my fedora 12 GNOME installation. Now Compiz fusion is not working. It says Accelerated 3D support not found. Though Nvidia drivers are already installed. Now I can't even ALT+TAB between open applications.
I tried "metacity -- replace" but then windows wore a weird look with only a minimize button. No sign of maximise & close buttons.
View 14 Replies
View Related
Dec 26, 2009
i ran yum update which updated kernel to 2.6.31.9.174.fc12.i686.PAE. Now after logging in i get a blank white screen. With previous kernel updates i have had no such problem. Anyway, the boot messages are following:
Quote:
checking for module nvidia.ko [FAILED]
nvidia.ko for kernel 2.6.31.9-174.fc12.i686.PAE was not found [WARNING]
The nvidia driver will not be enabled until one is found [WARNING]
Driver already disabled
I have a GF 6600 video card.
View 14 Replies
View Related
Jun 17, 2010
I read somewhere that when updating Fedora I might want ttemporarily disable userdefined repos like RPMfusion.I tried that with
Code:
yum upgrade --disablerepo=rpmfusion-free-updates
It updated, I rebooted, and now my nvidia driver is not found.
[code]...
View 2 Replies
View Related
Oct 30, 2010
a little while ago the file from nv stopped being able to run.. I cant update the driver and now always get this error
4: warning: comparison between signed and unsigned integer expressions
/tmp/selfgz2718/NVIDIA-Linux-x86_64-260.19.12/kernel/nv.c: In function �nv
_kern_read_registry�:
[code]....
View 2 Replies
View Related
Jul 17, 2010
Whenever I boot my system, I get this error:
Quote:
Enabling the nvidia driver: /etc/rc.d/init.d/functions: line 530: 1254 Segmentation fault [FAILED]
I also noticed that 3d acceleration was not working... I always launch Blender to test if 3d works, but not luck
My system:
Code:
2.6.33.5-124.fc13.x86_64
Nvidia GeForce 9800Gt
akmod-nvidia 195.36.24
Yes, nouveau is blacklisted:
Quote:
kernel /vmlinuz-2.6.33.5-124.fc13.x86_64 ro root=/dev/mapper/vg_desktop-lv_root rd_LVM_LV=vg_desktop/lv_root rd_NO_LUKS rd_NO_MD rd_NO_DM LANG=en_US.UTF-8 SYSFONT=latarcyrheb-sun16 KEYTABLE=us rdblacklist=nouveau
[code]....
View 14 Replies
View Related
Oct 13, 2009
I have been running F11 for some time now. I install updates regularly and to this time have had no issues. Now it comes up with error.
Code:
[root@red 2305 ~]
$ yum update
Loaded plugins: protectbase, refresh-packagekit
0 packages excluded due to repository protections
Setting up Update Process
Resolving Dependencies
--> Running transaction check .....
--> xorg-x11-drv-nvidia conflicts with xorg-x11-drv-catalyst
Error: xorg-x11-drv-nvidia conflicts with xorg-x11-drv-catalyst
Error: xorg-x11-drv-catalyst conflicts with xorg-x11-drv-nvidia
You could try using --skip-broken to work around the problem
You could try running: package-cleanup --problems
package-cleanup --dupes
rpm -Va --nofiles --nodigest
[root@red 2306 ~]
I do not believe that I even have the 'xorg-x11-drv-catalyst' mentioned here installed:
Code:
[root@red 2315 ~]
$ yum list all | grep installed | grep catalyst
[root@red 2316 ~]
This returns nothing so why the error?
View 5 Replies
View Related
Oct 29, 2010
I'm running Fedora 13 x64 and updated the kernel to the latest version (2.6.34.7-56 to 2.6.34.7-61). I use the proprietary nvidia drivers (currently 260.19.12) so I had to compile the kernel module against the new kernel sources and reinstall the driver. The process was apparently successful, but when I try to start X nothing happens, it's as if the computer had been suspended, my monitor acts like it isn't receiving any input. I have full runlevel 3 access, and the system seems pretty much fine up to that point. Nvidia's own sanity tests which are built into the installer reported no problems with my driver.
View 14 Replies
View Related
Sep 1, 2010
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
View 5 Replies
View Related
Jan 28, 2009
I have Fedora 10 installed. I've just made an update of my system. Things that were updated were a new kernel version with devel and also something with NVIDIA (which is my video card).
After restart of my system, compiz fusion no longer works.
I have a NVIDIA-Linux-x86-177.82-pkg1.run -file to manually install the NVIDIA-driver so the advanced features of Compiz can be utilized.
After install, the bootup screen tells me that loading the NVIDIA driver has failed. I also receive a WARNING-message.
View 14 Replies
View Related
Oct 18, 2009
I seem unable to get an nvidia driver working properly after upgrading to the latest kernel with Fedora 11.Here is my laptop and its specs: http://h10025.www1.hp.com/ewfrf/wc/d...reg_R1002_USEN[URL]I've tried both the kmod and akmod unsuccessfully. Everytime it gives me a black screen on boot, I can fix the problem by popping in the LiveCD, and changing the xorg.conf file back to the backup.Here are the errors/warnings from my boot.log file:
Code:
WARNING: Deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
Checking for module nvidia.ko: [60G[[0;31mFAILED[0;39m]
[code].....
View 6 Replies
View Related
Dec 27, 2009
I am using Ubuntu 9.10 with a GeForce 7300SE/7200GS video card. The current driver installed is 185.18.36 - installed via Ubuntu when the OS was initially installed. It appears that Ubuntu is not automatically updating, or at least not informing me, when a new release is available. The latest version Nvidia driver is 190.53 released on Dec 16, 2009. I have manually downloaded the driver (NVIDIA-Linux-x86-190.53-pkg1.run). Since I'm still "wet behind the ears" to Linux-Ubuntu, I really do know that much, if anything, about using the "Terminal" and all those "command line" entries. So first, can I set-up Ubuntu to check for Nvidia driver updates? Next, how do I manually install this new driver?
View 5 Replies
View Related
Oct 13, 2010
tried to install drivers for FX 5500 today, the one that Ubuntu recommended (173) and the current version (260). Both installs failed when it tried to set up python-support. Returned an exit status of "10". I don't know what that means. I could really use some help, because I just installed UT2K4, and without the driver, I can't play it. I'm running the latest release, as noted in the thread title. Dunno if it helps, but it was a clean install, because an alternate iso upgrade failed and mucked up 10.04.
View 3 Replies
View Related
Jul 30, 2010
I updated kernel and everything seemed ok, except HD-PVR is locking up and recording only two minutes of every show it records. So, I have gone back to my previous kernel, but it seems that X isn't starting:
Code:
(II) NVIDIA dlloader X Driver 195.36.31 Thu Jun 3 08:27:29 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[code]....
Fatal server error:no screens found I had done a yum install kmod-nvidia for the newer kernel. I am thinking I need to get the kmod for the current kernel again (2.6.32.12-115.fc12.x86_64 #1 SMP Fri Apr 30 19:46:25 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux), but am not sure how that is done?
View 2 Replies
View Related
Oct 14, 2010
I'm in the live CD right now trying to figure out what to do. When I first got into Ubuntu, it asked me to install nVidia drivers, so I did. Afterwards, it said I needed to restart my computer to finish installation, but when upon getting past the bootloader, my screen hangs on "Assuming drive cache: write through". I found this post: [URL] but the terminal commands didn't help and I can't find /etc/xorg.cfg even if I show hidden files. I've added a picture of the screen I get when I try to boot up, so maybe someone can tell me what to do to get back into Ubuntu. I would like to be able to get back without having to reinstall, if possible.
View 1 Replies
View Related
Aug 9, 2011
This morning, I authorized an update as almost every day. I saw that the nvidia driver was on the list but in recent years, I no longer fear these driver updates since everything usually works well...
Except that this time, no! I turn on my pc this afternoon and more 3d effects. I run "Nvidia X Server Settings" which tells me I do not use the nvidia driver and must run as root the command "nvidia-xconfig," what I do. I restart X and no display at all, only the prompt in text mode!
View 9 Replies
View Related
Feb 5, 2009
I am experiencing the following issue. After enabling SLI and PhysX in windows vista, my dual boot fedora 10 does not see the NVIDIA driver.
Doing: cat /proc/drivers/nvidia/0 I get? in the VGA bios for both cards.
I disabled both SLI and PhysX in vista, but the problem persists. I powerdown and unplugged the rig for several hours without results.
Here are my specs:
CPU: Intel Q9300
Board: MSI P7N Diamond
CARD0: EVGA Gforce 8800 GTS
CARD1: EVGA Gforce 8800 GTS
RAM : 4 Gbytes OCZ gold PC6400 (4 x 1 Gbytes)
PSU : Thermaltake SLI ready 850 W
It is important to mention that initially Fedora did see the cards and I was able to set up a dual monitor system. It right was after I enable SLI and PhysX and re-booting into Linux that the problem showed up.
I have seen this issue before in another machine with an ASUS board, but not until today I associated with the SLI setup. My guess is that there has to be something that the driver is enabling in the cards that messes up the interface between the nvidia.ko module and the kernel, but I don't know what may fix it. I need this system for some numerical calculations.
View 1 Replies
View Related
May 5, 2010
I've been running Lucid since it dropped. Decided to upgrade my NVIDIA 6600gt graphics card to the newest driver I found at the website. Installation went flawless. But after reboot, I got this:
Ubuntu is running in low-graphics mode
The following error was encountered. You may need to update your configuration to solve this.
(EE) May 05 12:24:17 NVIDIA(0): Failed to initialize the NVIDIA
kernel module. Please see the
(EE) May 05 12:24:17 NVIDiA(0): system's kernel log for
[Code]....
View 9 Replies
View Related
Jan 27, 2011
What is the best place to get an updated nVidia video driver for CentOS 5.5? Is there a CentOS package available that will update it? Or is it best to download it directly from nVidia?
Also, I do not have an internet connection on the machine, so it will have to be a manual download and installation.
View 6 Replies
View Related
Nov 19, 2009
I compiled the 2.6.31.6 kernel and <insert drumroll> it boots!(my first kernel roll, I'm kind of shocked actually) That's the good news. The bad news is that my NVIDIA drivers are gone in the wind. That's not entirely true as I can still boot into the old kernel and startx. Is there a way to download the driver using the command line for reinstall?
View 4 Replies
View Related
Apr 22, 2010
i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
View 3 Replies
View Related
Jan 30, 2011
I had a working ubuntu 10.10 system two days ago with kernel 2.6.35-24. I have a gtx 460 card so I have the driver from Jockey/Additional Drivers installed.
Two days ago update manager prompted me to install 2.6.35-25. I've never had problems updating kernels so I did. I Rebooted my machine and gdm/gnome no longer starts. I always get stuck on the tty1 screen. I did some troubleshooting and figured out that my current NVidia drivers seems to be messing it up. So I booted into my older kernel (2.6.35-24) and removed my NVidia driver.
I used these steps to switch from nvidia to nouveau:
NvidiaDriverSwitching
I can now boot into my latest kernel (2.6.35-25) but now I'm having problems trying to reinstall the nvidia drivers.
jockey sometimes doesn't list any available drivers. and when it does, it gives me an "System InstallArchive() error" when trying to install.
I tried installing nvidia-current via apt-get and I get these errors:
Code:
Setting up nvidia-current (260.19.06-0ubuntu1) ...
Removing old nvidia-current-260.19.06 DKMS files...
dkms.conf: Error! No 'DEST_MODULE_LOCATION' directive specified.
dkms.conf: Error! No 'PACKAGE_NAME' directive specified.
dkms.conf: Error! No 'PACKAGE_VERSION' directive specified.
View 7 Replies
View Related
May 17, 2009
Trying to get the updates for my Nvidia card, there are 3 updates in the update manager, but it gives me this error if I try to update them: -
Code:
nvidia-newest-kmod-common >= 177.82 is needed by package akmod-nvidia-newest-177.82-1.fc9.2.x86_64
nvidia-newest-kmod-common >= 177.82 is needed by package kmod-nvidia-newest-2.6.27.19-78.2.30.fc9.x86_64-177.82-1.fc9.8.x86_64
nvidia-newest-kmod-common >= 177.82 is needed by package kmod-nvidia-newest-2.6.27.21-170.2.56.fc10.x86_64-177.82-1.fc10.2.x86_64
nvidia-newest-kmod-common >= 177.82 is needed by package kmod-nvidia-newest-2.6.27.19-170.2.35.fc10.x86_64-177.82-1.fc10.2.x86_64 : Success - empty transaction
View 2 Replies
View Related
Jan 22, 2010
I have some trouble installing the nvidia driver on Fedora12. I started to follow the guide posted by Leigh here:[URL]..I enabled the rpmfusion repo, but when i wanted to install kmod-nvidia and xorg-x11-drv-nvidia-libs.i686 i had a depadency failure Here's what i got:
Code:
[root@Nuclear pinter]# rpm -Uvh http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
Retrieving http://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-stable.noarch.rpm
[Code]...
View 2 Replies
View Related
Feb 9, 2010
I've installed the nvidia driver from nvidia website. I don't want to mess up my system So my question is how can I uninstall this nvidia driver? (I want to install the one from youm repo)
And my second question - when I'll be installing my nvidia drivers from repo, this is the best way to go: [URL]
View 7 Replies
View Related
Nov 24, 2010
I'm somewhat new to Fedora but not Linux in general. I went to install the nvidia driver as per any instructions I found on the internet that yielded results. I typed sudo yum install kmod-nvidia and eventually got a driver, blacklisted nouveau, restarted, and finally got compiz and all my desktop effects.
The problem was when I played Minecraft, which for those who don't know is a game, from a .jar file. After ~5 minutes of playing something happens and everything freezes. Video completely stops but I still have mouse control and sound(at least for anything already running). Clicking stuff does nothing and no hotkeys work to bring up anything at all. I end up having to do a reset by hand to get anything done. Turning off desktop effects didn't help.
Why is this? Did I install the wrong driver, even though kmod-nvidia should find the right one on it's own? nvidia 8800 GT is my card. Could it be the java program screwing things up royally? I can't remember if the program worked fine on it's own before the driver install, but uninstalling the driver now causes the game to fail on launch, which I guess makes sense but can't figure out if it's simply the lack of driver or if removing the driver screwed something else up. I might just reinstall fedora and start from scratch again, but before I did that I wanted to find out if I'm just installing the wrong driver and can simply find teh right one to fix all of this.
View 8 Replies
View Related
Dec 16, 2010
I am stuck with Fedora 13 due to the fact that clutter has some nasty bug which colides with the nvidia binary blob driver (I _require_ CUDA _and_ usable 2D/3D). So the new version is out since some days ago but not yet in rpmfusion. So did anyone give 260.19.29 a shot and does the 2D/3D UI still lag?
View 14 Replies
View Related
Oct 6, 2009
I had to have the Nvidia Driver build a module to my kernel. It goes through, says it was successful, but I an unable to start X and get this log:
Quote:
X.Org X Server 1.6.1.901 (1.6.2 RC 1)
Release Date: 2009-5-8
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.6.el5 i686
[code]....
Its an Nvidia 8200 integrated graphics card... Not sure if there is a wrong driver or the driver is in a different location then where Fedora is looking.
View 8 Replies
View Related
