Fedora Hardware :: 15 - Black Windows With Nvidia Drivers (GF6200 TurboCache)
Jul 20, 2011
decided recently to try a new Fedora (15) on my desktop computer with old GF6200 TurboCache (64MB physical memory). Installation was pretty easy, however the screen was full of artifacts on default driver (Nouveau). Therefore installed nvidia drivers following this guide [URL]. It seemed to be working... until I opened more than 5/6 windows - every new window was appearing black. Resizing the window helps but it looks like the total display area is limited (memory problem?) - I can downsize the visible windows to give more resources for the new one. Played with nvidia-config for some time without any luck. Google showed me I was not alone with this problem - [URL]. However no solution is apparently available yet. Let's start with some debug information:
[Code]...
View 6 Replies
ADVERTISEMENT
Nov 29, 2009
Although I managed fairly quickly to get 3D enabled on the GF 7600GS of my desktop, it took me longer to get 3D up on the GF 9650M GT of my Asus laptop M70Vn. Although I made extensive use of the numerous procedures outlined here, none of them worked and booting my laptop always ended up with me facing a jet-black screen and a completely inexpressive blinking white cursor. My solution was simple: I did not blacklist Nouveau and problems mysteriously disappeared.
View 2 Replies
View Related
Jul 28, 2010
I have Asus N61jv laptop with optimus, and i use ubuntu 5-6 months, i know that i can't use my nvidia graphic card, today ubuntu offered to install nvidia drivers and I accidentally clicked, after restart i see only black screen, can someone explain me how to get back to a previous state, i found some topic with this solution "except booting to a live cd and disabling gdm.". How can i fix this problem, i have important data on ubuntu?
View 3 Replies
View Related
Aug 5, 2009
I have scoured the web the last few hours and I have come across a plethora of similar problems relating to Ubuntu and Nvidia drivers. However, I still havent found a sufficient cure for the problem.
The exact problem I face is that as soon as I install the Nvidia recommended drivers using the "Hardware Driver Manager", I restart the system but it never gets past the login splash screen. After I log in it simply goes to a black screen and sits like this indefinately.
Does anyone know of a particular fix for this problem? I am at the end of my tether and there is no way I can use Linux if it means either getting a different graphics driver or sitting on a 800*600 resolution. (Not to mention I dont have acclerated 3d support...so no DVD playing!)
I have a Nvidia GeForce4 MX graphics card and im a complete n00b to Linx so please go easy on the technical jargon.
View 3 Replies
View Related
Jan 3, 2011
I am using the actual "testing", Debian works in version 5 on my notebook (or at least starts), but I can't use it b/c I have too much new hardware what is already implemented in the testint Version. I already had debian 6 running but that wasn't the good way to do it.
I have an Alienware m17x R1, with a q9000, a nivida mobile 260gtx. I know that the Problem the basic Debian Driver for Nvidia cards is. It is enough if I can use at least the command line of Debian to install an actual Nvidida driver and get the system running. But that's not possible!
I solved it once, with plugging in an External Monitor to my Notebook, but I don't have one at home at the moment and honestly there must be a better way for. How to "let debian 6. use the Notebook Screen"?
View 4 Replies
View Related
Apr 16, 2010
On both Karmic Koala as well as Lucid Lynx, I am having massive problems getting my nvidia card to register properly. I am on an Acer Aspire 5953 laptop pc with a Gt130m discrete GPU in a hybrid installation with an onboard GPU.Freshly installed, both 9.10 and 10.04 runs smoothly, I can enable desktop effects, I can even see the screensavers that run openGL - although they run laggily in fullscreen, since they're obviously using the onboard, and very weak, GPU.The problem however, appears whenever I install the suggested NVIDIA drivers that Ubuntu finds for me - after doing this, I am asked to reboot the system and on both systems, I am treated to a black screen, instead of a login-screen. The only way to get the system up and running again, I have found, is boot in fail safe mode and edit /etc/X11/xorg.conf, erasing everything. This lets me boot back up in a regular mode.
When I check the logs, both the onboard GPU and the gt130m GPU is located, the onboard as PCI:0:0:2:0 and the nvidia gt130m discrete gpu as PCI:0:1:0:0 - I have tried adding BusID: ("PCI:0:1:0:0") to the xorg.conf, too, to no avail. I am continously treated to the black screen (a flicker at most) and the logs always tells me that no xserver could find no screens.So far, I have only been installing Ubuntu inside windows - I am hesitating to install on a fresh drive, since I am afraid of the nvidia black screen putting me in a position where I can't access the system. Is it possible that the fact that I install ubuntu inside windows might somehow affect Linux's capability of accessing my discrete GPU?
View 2 Replies
View Related
May 18, 2011
I have an problem with login in to a fresh installed Ubuntu with the nvidia drivers (graphics card nvidia 210). So far I have installed Ubuntu 10.04, Ubuntu 10.10 and Unbuntu 11.04, they all seem to have the same problem. when I log in the screen goes black and the pc's hangs. I can switch to a terminal before I login and everything seems operational. I can login to Ubuntu with a fail save x session.
View 8 Replies
View Related
Oct 5, 2010
The new NVIDIA drivers don't seem to work as seamlessly as back in Jaunty and before. In Lucid when I activated the drivers I had to do some grub tweaks to make my splash look normal... But with Maverick it is even more messed up...
Problem: The splash either doesn't appear at all (black screen) or it appears in the text format rather than graphics... In some instances it even hopelessly tried to load the graphics splash - loaded the background but the instead of Ubuntu logo and the progress-bar animation it displayed a "Ubuntu 10.10" in a monospace font.
View 1 Replies
View Related
Mar 7, 2010
[URL] I just updated and then saw this news , whats the solution for me, I either want to go beta or downgrade, If i try to boot to previous kernel, boot hangs in graphic mode, I cant start X and gdm . How to install kmod with beta drivers? Or whats the solution, nvidia ver: 195.36.08
[Code]....
View 16 Replies
View Related
Mar 12, 2010
I've tried to install nvidia drivers using this commands:
Quote:
yum install kmod-nvidia
yum install akmod-nvidia
yum install nvidia-xconfig
After rdblacklist=nouveau in grub it runs, but I am having several issues and therefore I would like to downgrade to nouveau or whatever I had running with basic fedora 12 installation.
My GPU is nvidia gtx 280:
Quote:
[root@localhost ~]# /sbin/lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation GT200 [GeForce GTX 280] (rev a1)
My kernel is:
2.6.32.9-70.fc12.i686
View 4 Replies
View Related
Nov 18, 2010
I just received my laptop this week and have been tweaking my laptop to acquire more stability. I just installed the NVIDIA proprietary drivers for the NVS 3100M chipset and I have a residual windows that wont disappear even after reboot. Even after reinstalling the NVIDIA driver it stays. Is there some way to flush the framebuffer?
View 8 Replies
View Related
Jul 24, 2009
I just did an update of my Fedora 11 machine, and it required a restart. After restart it will not try to boot up or even show a splash screen. The only thing I see is a black screen with a flashing white cursor.Any ideas on what I can check so I can boot up into Linux again.
View 14 Replies
View Related
Sep 23, 2009
NVidia FX5200: nvidia-glx-173xxx The problem is that, when I install it, upon rebooting, I get a black screen with one blinking underscore at the top left corner. I somehow managed to get into the console and .. there's something wrong with the video card driver ( no way I could catch it into a picture ).
This was the exact reason why my Fedora CD was laying on the corner for months - I remember having this issue earlier as well.
Is there a way to fix it or at least, recover from a broken video card driver ?
View 4 Replies
View Related
May 12, 2010
I have nividea 8400 gs geforce gpu. i need some help about my graphic driver. what driver i need for mu gpu in fedora. i did not find any drivers for fedora linux, all drivers is for windows platform.
View 1 Replies
View Related
Feb 13, 2011
when i try to install the nvidia drivers with 'yum install kmod-nvidia' its worked before, but now i get this (look at the bottom for where it goes wrong)
[root@localhost Tom]# yum install kmod-nvidia
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
Setting up Install Process
Resolving Dependencies
[Code].....
View 13 Replies
View Related
Jun 16, 2011
I have Fedora 15 on my 64 bits PC, and i install the nvidia propetary driver using the rpm fusion repository and the metapackage "kmod-nividia".
The installation works fine, but the drivers not, it seems like Nouveau run's better.
So... can i uninstall the nvidia drivers and fedora automatically use Nouveau??, or the system loose both drivers?
View 3 Replies
View Related
Dec 28, 2009
Issue: Black screen displays after nVidia splashscreen.
History: I performed a clean install of Fedora 12. I performed NVidia driver "GEForce 4 and below" install for a PAE kernel as found here:[URL]..I kept a log of each command in the order performed:
[Code]...
Well, I just got back from the Pepsi Center after watching the Denver Nuggets NBA basketball team look silly against the Dallas Mavericks. 4.5 hours later and I still have a black screen. Was it Einstein who said, "it is insanity to do the same thing, the same way, over and over and expect a different result"? I feel I will been testing that hypothesis soon.
View 14 Replies
View Related
Mar 13, 2009
I updated fedora 10 a few days ago, by blindly installing every update available, and when i restarted, my nvidia drivers weren't loading, and I'm having an issue I had before, where the signal being sent to the monitor is out of frequency range. Basically when fedora tries to load its GUI, my monitor just goes blank. Before I could only fix it by plugging in a different (less tempermental) monitor, and messing around with the display driver.
I was wondering if there is a way to mess with the drivers from the command line. I really don't like switching out monitors, and i want to learn the skillz and such.
View 4 Replies
View Related
Aug 6, 2009
For a new project at work, I'm looking into building a processing farm of a few dozen Tesla 1U servers from Nvidia. This has lead us on to figure a way to let the developers run tests on their own workstations (with the appropriate gfx card).The cards we're looking at are Quadro FX 1800 or 3800's to provide quite a bit of poke.
Thing is, I'm having issues with running any Cuda code successfully on systems installed with the pre-built nvidia drivers from RPMFusion. I can only get code running if I download the nvidia or cuda drivers from nvidia and install by hand. Not something I'd like to be maintaining across all out developer workstations. Is anyone out there running Cuda on Fedora/RHEL5 platform? If so, are you using RPM nvidia drivers or building them by hand?
View 2 Replies
View Related
Feb 1, 2010
I seem to have an issue with my nvidia drivers again.I get them working, then the next lot of updates to fedora seems to revert any progress I've made.Currently I can't run any 3d accelerated applications, no wine, no games etc, I have followed the documentation, installed the driver, added the blackist to noveau into boot.conf, and restarted
Code:
[james@nevada ~]$ uname -r
2.6.31.12-174.2.3.fc12.x86_64
[code]...
View 3 Replies
View Related
Mar 31, 2010
I tried again (with easylife this time) and I got the same result - once the kmod was finished I just got a cursor - so two tries with two different methods, same result. So, is there a generic type driver that will at least take advantage of some of the features of my geforce 6800?
View 10 Replies
View Related
Sep 8, 2010
I am a real Linux noob lol XD. So sorry if this questions seems a bit easy for some. So here it goes: I want to install NVidia drivers for my laptop and need a compiler to actually install them. I do not have any installed and would like to know how to install gcc, as in the error when i run NVidia driver it says that I need it.
View 9 Replies
View Related
Sep 14, 2010
I've been scouring google, using all forms of guides to try and get these damn nvidida drivers installed so I can move my resolution from 800x600 to 1280x1024 (I have a small monitor) I'm running a NVidia GeForce 260 GTX. I've executed yum update I've run rpm - [URL] and everything installed. I've edited grub.conf to disable the default drivers.
[Code]....
View 7 Replies
View Related
Mar 9, 2011
I'm new to linux and am trying to install Nvidia drivers on my system. The install says to :-
1. install Binutils (which i've managed to do)
2.stop the X service from running (here I'm having problems)
I've tried "X -terminate" but I just get an error message. point to how I can terminate the service.
View 12 Replies
View Related
Jun 17, 2011
I updated FC14 which included the kernel and also the nvidia drivers kmod. Then after a reboot the video driver wouldn't load. From another terminal I tried different things to fix it and didn't managed. I eventually erased all nvidia drivers so that I can get the default one. Now every time it boots I get a really low light. I can login, but can't see. It seems that the whole screens has about 5% light and I can't see to do anything. I managed now to boot into FC live CD for FC15 and I have light. For FC14 live CD it's the same no light problem.
I tried all older kernels to boot but I have the same problem. I am using PAE kernel and that's why I installed the kmod drivers. But now, since they are not anymore and I can't see anything, even though I am logged in I don't know what to do next. Is there something I can do from FC15 live cd? How can I go using the terminal to my harddisk and how to add the driver or any low graphic driver so that I can have light? After I did yum erase *nvidia* the light went almost off.
View 2 Replies
View Related
Dec 3, 2010
The updated Kernel 2.6.32.26.175.fc12 (i686) broke nVidia 96xx drivers (nVidia MX-4000 card).Resulted in a quickly flashing cursor in the upper left corner, with no X startup.I removed the driver and let it rebuild using akmod. Still have the same problem.When I revert back to the previous kernel 2.6.32.23-170.fc12.i686, all is well.At this point, wonder what the chances are of this being fixed? Seems the last set of updates before EOL of a release always breaks something critical.
View 6 Replies
View Related
Nov 20, 2009
After searching online and in these forums I found two different ways of installing the Nvidia drivers in fedora 12. If you haven't yet installed the the repos then:
Code:
su
rpm -Uvh http://download1.rpmfusion.org/nonfree/fedora/rpmfusion-nonfree-release-stable.noarch.rpm
First way:
as su
(1)
yum --enablerepo=rp*g install kmod-nvidia.$(uname -m) xorg-x11-drv-nvidia-libs.i686 xorg-x11-drv-nvidia-libs.x86_64
[Code]...
I used the first way and everything seems to work fine. Compiz-fusion works good but i did have to add vga=795 to /boot/grub/grub.conf to get the graphical boot loader to work again. Should I have used the second method? What is the difference in these two ways? Most notably the second steps. Is one way better or preferred over the other? From my understanding you must do this because of the nouveau driver.
View 10 Replies
View Related
Apr 8, 2010
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
View 3 Replies
View Related
Dec 24, 2009
I had a fully working Nvidia driver setup in FC 12 with no problems using an old LG monitor (LCD panel) on a VGA connection. I have just replaced the monitor with a newer Dell model that has a DVI connection. I plugged it in and got nice Post Screen, FC 12 boot progress display but when it got to displaying the login screen it went black.
Ctrl +Alt+F2 took me to a command prompt where I can type commands no problem. If I change the driver to the Nouveau (and Chattr +a the xorg.conf file) I get a lovely gui. So far nothing I have tried has let me use the Nvidia driver. I have searched around Google and tried nvidia-xconfig, system-config-display, livna-config-display xrandr (which fails to work at all) but so far I have got no where.
View 5 Replies
View Related
Feb 19, 2009
This is my first post, as I've finally become fed up with trying to get the nvidia drivers installed on Fedora 10. I've read through all the posts here about how people have had problems. I know about the rpmfusion repository, and have followed leigh123's instructions to the letter at this link:[URL]The exact stepsI have taken before following his sage advice follows this way: install off the CD image I burned of Fedora 10, run from the menus "System-->Administration-->Update System" to get the system up to date, reboot to make sure everything is working fine.
Then I follow the above instructions (only because they have gotten me the closest to getting the drivers working). After the reboot from following those instructions, the system starts up, and I have a desktop. But when I restart again, either because I'm shutting down for the night, or just to check again that everything is fine,I get nothing but a flashing cursor in the upper left of my screen. I'm able to CTRL+ALT+F2 and get to a login that way, but can't get into the GUI. I've searched the forums (both here and on The Web generally), and can't find a fix for this that works for me. I have gone back and erased the partition and reinstalled, so I'm at the basic install with all the updates for my system, and needing help with getting the drivers installed and working.
Just to give a run down of what I have on my system:Two NVidia 8500 GT cards connected with the SLI bridgeAMD Athlon 64 X2 Dual Core 3800+Runningl 2.6.27.12-170.2.5.fc10.x86_64 (I'm typing this up as I reinstall updates as I listed above).Before anyone starts giving suggestions, please make sure to give the full instructions, as I'm new to Fedora/Linux. And if there is anything else you wish to know about my configuration
View 9 Replies
View Related
