Fedora Hardware :: 12 On EBox 3300 - Cmov Error "Unable To Boot"
Mar 24, 2010
I have an eBox 3300 PC. Fedora 11 runs great on it. I went to upgrade to 12 and right away while the DVD was still loading I got this error: "This kernel requires the following features not present on the CPU: cmov Unable to boot. Please use a kernel appropriate for your cpu. I'm at a complete loss. What do I do next? I downloaded the fedora 12 i386 package, which I also had the i386 of fedora 11. Is this a hopeless problem or is there something I can do to get 12 to install on this pc.
View 2 Replies
ADVERTISEMENT
Jul 29, 2010
I want to install CentOS on my ebox 3300. Ebox has this hardware:
* 1Ghz x86 CPU
* 256 MB RAM (512 MB available on Q2/2009)
* Support for 2nd NIC
* Integrated Full Clock FPU
[code]....
The specs below is for my Jr DX which includes the wireless option and 2x RS232 ports, plus I have a 1 GB Compact Flash and a USB-Serial usb unit (PL2303) plugged in.
cat /proc/cpuinfo:
processor : 0
vendor_id : Vortex86 SoC
cpu family : 5
[code]....
I want to install it from my 4 GB usb stick onto my 4 GB CF card. I dunno how to get CentOS correctly onto my usb stick. I have tried unetbootin method and method from centos wiki, but it does same thing - after loading vmlinuz and initrd.gz it reboots. But when I tried to boot from that same usb stick on my laptop, it worked. Has anyone some experiences with installing centos on ebox? Or does anyone know what to do with it? Gentoo for example boots correctly, but gentoo can't install of CF cards (live instalation CD hasn't it in kernel enabled) and doesn't know my ethernet card (same).
View 1 Replies
View Related
Sep 27, 2010
Installing file sharing using eBox and get the following error:
[Code]///
View 1 Replies
View Related
Jan 28, 2011
I have a VIA C3 Nehemiah 1GHZ, Model 9, Stepping 8. It has CMOV support. The chipset is a CLE266. This is a PCCHIPS mini-itx board. I have tried installing the following: Debian 5.08 Multiarch liveCD. What works:
- Installation works properly.
- The kernel installed was an i486 type, even though I have the CMOV instruction.
What does not work:
- A normal, non-verbose bootup will freeze the system, seems like it happens right after CPUFREQ module starts up.
What I've tried:
- booting using noapic result = no change, still freezes up.
The freeze up completely freezes everything including USB, I can tell because I have a wireless keyboard whose receiver lights up when a key is pressed. After the freeze occurs, the receiver stays lit until I power down.
Note Also: Ubuntu 7.10 works perfectly. Ubuntu 9.04A6 worked perfectly. Ubuntu 8.04, 8.10, 9.04, 9.10, 10.4, 10.10 all exhibit a similar freeze up, except it happens after X11 starts up and Gnome Desktop is loaded but not right away, after a few seconds. Note Also, when I use failing Ubuntu's, if I do a CTRL+ALT+F1 and go to the terminal, the system does not freeze.
Note Also, I tried using cpufrequtils in Ubuntu 10.10 and setting the minimum speed to 800MHz but still got the freeze ups. I do not know why 7.10 and 9.04A6 worked properly, but none of the other debian based distros work without freezing... EVEN THE UBUNTU LIVE CDS FREEZE UP!
View 5 Replies
View Related
Jul 25, 2010
I recently built a few boxes from old scraps, figuring I would give those good ol' K6-2s a second chance with Fedora. I didn't got far though. On booting the install CD, the kernel will spit immediately after loading: "this kernel requires the following features not present on the CPU: cmov"
I've tried with the Live CD I already had, and on seeing it's marked as i686 on the download page, I also tried with the normal "i386" non-live install, with the same result. I can boot Knoppix just fine, so I'm guessing what I want is a Fedora install with a kernel not optimized for i686. Does such thing exists? Probably not, unless I get an old release. But which one? And should I be able to update to fresh versions? Or what alternate methods of installing could I use?
View 5 Replies
View Related
Sep 2, 2009
I installed windows and haven't been able to boot to fedora since. Without a boot disk my machine complains 'BOOTMGR is missing'. If I use a boot disk to access grub on another linux partition (/dev/sda5) I can try to boot my fedora install using its old grub.conf settings. However this gives me the grub error:
Code:
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz-2.6.29.6-213.fc11.x86_64 ro root=UUID=63608748-e626-4a3f-9232-c836524f606f rhgb quiet
Error 2: Bad file or directory type
Darn grub thinks the file system type is ext2fs - this makes me think windows might have written something (perhaps its bootloader) to the first partition rather than the MBR.
View 10 Replies
View Related
Feb 6, 2010
not sure what happened, yesterday i installed the new kernel and played around a bit by uninstalling some older kernels. Everything was fine but now i cant boot into ubuntu any more. I have a Dual boot and Grub let me boot into windows. for linux grub gave error 17 (if i remember correctly).o i popped in the LiveCD and tryed gparted to check for errors (nothing changed). I tried rewriting grub from the live cd and that made matters worse.
Code:
grub> find /boot/grub/stage1
find /boot/grub/stage1
[code]....
View 3 Replies
View Related
Dec 5, 2010
I am trying to install Linux on a 12-year-old PC with an AMD Pentium II equivalent and with 128Mb RAM. Xubuntu 10.04 won't install because the kernel requires "cmov" but the PC's processor doesn't have it. There are loads of posts on the Internet about this but I have not found any listings of Linux distros that don't need cmov other than TinyMe, which I shall try installing.
There is no hope of my being able to use the command line to replace the kernel version or for any such fix -I am just too new to it all. nice-looking distro that should install that doesn't look too old and that has a good set of features?
View 14 Replies
View Related
Jan 6, 2010
Question about shared libraries dependancies & ldd: Lets find dependancies for /bin/echo :
$ldd /bin/echo
linux-gate.so.1 => (0xb7f70000)
libc.so.6 => /lib/i686/cmov/libc.so.6 (0xb7e01000)
/lib/ld-linux.so.2 (0xb7f71000)
Lets focus on libc6 :
[Code]....
What is this directory /lib/i686/cmov? How does ldd to link /lib/libc.so.6 to /lib/i686/cmov/libc.so.6? Why having 2 libc6 on the system (files have different sizes, so are different)?
View 2 Replies
View Related
Jul 8, 2011
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
View 9 Replies
View Related
Apr 21, 2010
I've been googling and searching these forums and I can't find a fix. I just discovered that I have a headphone jack on the bottom of my monitor and it would be a lot more convenient to use that rather than the jack on my tower. However, when I switch to HDMI audio output I don't hear anything. I now it's not my cable because it works on my HDTV and throughput audio fine.
I have Ubuntu 9.10 with the Asus M4A78T-E mobo with integrated ATI HD 3300 graphics. I am running the official drivers from ATI, ATI Catalyst 10.3 Proprietary Linux x86 Display Driver, the latest and greatest, not the one from Synaptic. I know this is a bad time to be looking for a fix since 10.4 is out in 8 days but if anyone knows a quick fix that would be great.
View 1 Replies
View Related
Nov 30, 2010
I've got an HP LaserJet 3300 all-in-one that I can't seem to get working as a scanner.Printing and copying work fine, but not the scanner function. I'm running kubuntu 10.04, but my guess is that kubuntu vs. ubuntu doesn't matter here.I'm using an IEEE-to-usb cable to connect the device to my box. When I first plug it in, cups recognizes it, and I see a popup in the lower right of my screen entitled "printer applet" and saying configuring new printer". Then it says "hp-laserjet-3300-3310-3320 is ready for printing". After this, printing works fine.But no scanning. lsusb doesn't see the device:
[brett@grox:~]$ lsusb
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]....
View 4 Replies
View Related
Feb 27, 2009
I use web server apache use php fastcgi (Centos 5.2, apache 2.2.9 , php 5.2.5 and fcgi-2.2.4 ). I receive error : "The server encountered an internal error or misconfiguration and was unable to complete your request. contact the server administrator, no-reply@zz.vn and inform them of the time the error occurred, and anything you might have done that may have caused the error. I view log :
[code]...
View 1 Replies
View Related
Aug 9, 2011
I am currently using ubuntu 10.10. I downloaded ubuntu 11.10 and created bootable usb drive.But now it giving error "BOOT ERROR".The same error occured when I tried to install 11.04..Also I am using windows 7 dual boot with ubuntu 10.10
View 1 Replies
View Related
Oct 24, 2010
I am using Ubuntu 10.04 and am having a major issue with it not booting. My PC worked fine yesterday but when I tried to boot this morning I get the error "error: unknown filesystem" and under that I get the "grub rescue>" prompt.
At first I thought this was just a problem with Grub that would be easy fixed so I put in my Ubuntu USB and loaded it up in live mode. But when I try to look at my file system from within the live environment I can't seem to see any of my files.
I have looked at the drive in GParted and my main file system (/dev/sda1) shows up as 'unknown', while the swap partition (/dev/sda5) shows up as it should. I have also looked at the drive with the Disk Utility and the SMART Status says the disk is healthy.
I am really concerned about this as currently the system is totally unable to load, not only that but I am also unable to recover my data from the drive which is my main concern as I havent done a backup for quite some time and I have a lot of python code that I have been working on that I really need to get back.
Has anyone got any idea of what to do and how I might be able to sort this out or at the very least recover all my data. I can't understand why this has happened I have not made any changes to the system recently other than installing the updates that came through yesterday. This is a really urgent issue for me and any help will be very appreciated.
View 7 Replies
View Related
Apr 6, 2011
where do I find the driver for 1394 net adapter in a compac athelon 3300 desktop (2005 vintage). I am helping a friend and she does not have the disc.
View 3 Replies
View Related
Jul 31, 2009
A few days ago I decided to ditch Windows for good. I read for hours about a Linux distro and settled on OpenSUSE.
I just need to say one thing. Linux is not for the feint of heart, and everywhere I turn (forums), I see computers riddled with error messages, frustrated people, and the list goes on.
I'm willing to work through this though since I feel that the benefits will outweigh anything that Microsoft can offer, so here goes.
Upon installing the new build of OpenSUSE, I encountered an error message that was fixed by hitting retry (I forgot the name, but I remember it being something like Etk3 or something of the sort).
My issue now is not being able to boot into the OS. I'm getting Error 25 from GRUB on stage 1.5
I've installed 11.1 over my Windows XP partition. I want XP no more. Additionally, I read the sticky and followed all the instructions. I also selected the KDE desktop (I still don't know the difference between that and GNOME despite Googling it several times).
View 9 Replies
View Related
Nov 27, 2010
I decided to install Ubuntu on my desktop after the setup went well on my laptop and I liked the OS. I already had Windows 7 and Backtrack 9 installed on my HDD, so when I was in setup I took the 200gb partition for BT9 and formatted SDA5 to ext3 with "/" as the root. Then checked "format" and selected SDA5 from dropdown list and continued to install.Everything went smooth in the installation and I was prompted to reboot which I did assuming I would soon see a GRUB screen. Instead I got an error saying
"Grub loading stage1.5.
Grub loading, please wait...
error 15"
and then the computer just freezes. I've tried to boot from CD but I just get "CD-ROM Boot Priority ...Boot Ready" and then after about 30 seconds it tries to boot from the HDD and I get the same error.I've read that I need to configure GRUB somehow but I have no idea how to do that and I can't boot anything from a CD because it just waits and then jumps to the HDD. I guess what i'm asking is if there is a way to configure GRUB from the BIOS menu or make it possible to be able to boot from a CD.
View 9 Replies
View Related
Dec 1, 2009
I installed fedora 12 as second os along with ulimtate vista on 64 bit machine.
I was able finish the install and boot to fedora first time. but after updating the software , i am unable to boot into fedora but am able to boot in to vista.
I am using a HP Pavilion HDX9000 notebook series. it has 2 100gb hdd. vista is on c and fedora is on d. boot info was written to MBR on C drive.
View 1 Replies
View Related
Jan 28, 2010
Having a major issue with my laptop. I am unable to boot into my Vista installation.I am currently posting this through my Fedora 11 installation which I had already. If anyone is interested, the BSOD error is:
0x0000007B (0x80399BB0, 0xC0000034, 0x00000000, 0x00000000)
As far as I know, a '7B' BSOD is usually a hard disk error but I am 100% sure the HDD is fine as I can read and write from both Fedora and Knoppix without issue. Steps taken so far: Obviously, I have tried the usual steps of trying to start windows in safe mode, last good config, and all of the F8 options. When they failed, I used fedora to check for some solutions online (Mostly useless answers from MS) and I found one successful case when a person flashed his BIOS back to an earlier time. Unfortunately, I cant get the BIOS update I got from the Dell website to boot from a USB drive (Says invalid boot disc - the BIOS on it is in the .exe format which I can't use in linux) and I do not have a floppy drive on the laptop.
So, I put in my Dell drivers and utilities CD hoping that it would give me some option to update (Or roll back) the BIOS but there was no such option. However, it did give me a load of diagnostic options including repair options by symptom so went with the "Unable to boot from BIOS". Unfortunately, that didnt help me at all. So, I got my Vista installation disc (OEM supplied) and managed to get to the repair menu (Which I had among my F8 options anyway) but this also has the option to reinstall. Unfortunately, it states that "Upgrade is unavailable" and that a clean install is the only thing I can select (At the expense of my files and settings).
As for the repair options, the automatic recovery doesn't seem to find any errors, asks to reset and see if all is well (It isn't). For some reason, system restore doesn't detect any restore points. There are no windows memory errors detected and I have no backups. So, i'm left with a command prompt that, by default, is asking for a file in this folder: X:/WINDOWS/System32/ I have no idea where it is getting the X: drive from - I have C and D drives for windows only. As per another online guide, I tried:
[Code]....
View 8 Replies
View Related
May 13, 2010
I just installed eBox on the Ubuntu server 10.version, server reports is successfully finished installation, but I received warning message Not Found
The requested URL /ebox was not found on this server. Apache/2.2.14 (Ubuntu) Server at 192.168.1.100 Port 80
when I tried to open ebox web based panel in firefox on my laptop.
my Apache web server is running well, see,
It works!
This is the default web page for this server. The web server software is running but no content has been added, yet.
View 2 Replies
View Related
Feb 24, 2009
I'm running Debian testing and after a recent software update, suddenly I can no longer boot into my single Linux kernel image anymore. I did look at the software update before I did it and I don't believe that it removed any software packages. When I try to boot into my linux 2.6.26-1-amd64 image, I get the following message from grub:"error: unknown command `initrd'"..The same error appears if I try to boot into single-user mode. I have a Windows XP partition on the same hard disk and I am still able to boot into that from grub. I've searched the net and haven't really found my same problem replicated anywhere. I would imagine that the problem is just that somehow the initrd package got removed in my last software update, but again I don't recall seeing any software that the update planned to remove.
Any thoughts on how I would go about fixing this problem? Since I'm unable to get into Linux at all, I imagine I'll have to use a LiveCD to get in and fix the problem, but I don't know where to begin looking.
View 8 Replies
View Related
Jul 3, 2010
this is a simple fix i hope. all i need is for someone to give me the terminal command to install a module onto ebox.
View 3 Replies
View Related
Mar 22, 2010
I am trying to configure an eBox to act as an http proxy but having trouble using that proxy on client computers to browse internet. The ifconfig on ebox returns the following:
eBox141:~# ifconfig
eth0
Link encap:Ethernet HWaddr 00:0c:29:ee:64:f2
inet addr:10.45.48.108 Bcast:10.45.255.255 Mask:255.255.0.0
inet6 addr: fe80::20c:29ff:feee:64f2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:90045 errors:0 dropped:0 overruns:0 frame:0
TX packets:226 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7043548 (6.7 MB) TX bytes:35150 (34.3 KB)
Interrupt:16 Base address:0x2024
eth1
Link encap:Ethernet HWaddr 00:0c:29:ee:64:fc
inet addr:192.168.122.158 Bcast:192.168.122.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:feee:64fc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1123 errors:0 dropped:0 overruns:0 frame:0
TX packets:781 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:949754 (927.4 KB) TX bytes:92267 (90.1 KB)
Interrupt:16 Base address:0x20a4
eth0 is on the internal lan with the client from which I want to access the internet
eth1 is can access internet all right.
The ifconfig on a client returns
eth0
Link encap:Ethernet HWaddr 00:0C:29:46:58:7F
inet addr:10.45.48.102 Bcast:10.45.255.255 Mask:255.255.0.0
inet6 addr: fe80::20c:29ff:fe46:587f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16014030 errors:0 dropped:0 overruns:0 frame:0
TX packets:835276 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1297106653 (1237.0 Mb) TX bytes:738158694 (703.9 Mb)
I configured the Firefox on the client to use eBox's ip address/port in the proxy settings but I still can't get on the internet.
eBox is on a vmware workstation 7. It is eBox 1.4.1
eBox has two virtual nics (above) - one is NAT (eth1) and the other is bridged (eth0)
The client is on vmware ESXi 4.0. It's an openSUSE 11.2.
View 2 Replies
View Related
Dec 14, 2009
Make: Fujitsu-Siemens
Model: LifeBook P7120
For some reason (hardware - I am guessing) the LiveCD does not boot on some laptops. The LiveCD worked well on my Dell Inspiron 1525 without any problems but my Fujitsu-Siemens refused to boot up. If you are trying to install or use F12 with the LiveCD ISO image burnt onto a CD on a laptop and fails with the following error:[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own Boot has failed, sleeping foreverthis workaround may work for you. Sometimes it will come up with another error about 'Root Device Not Found'
The workaround only works on a bootable USB key for some other reason, created with 'live-usb creator' and not a CD nor a LiveCD image on a USB created on a windows machine. I have tried them all.
[Code]...
View 1 Replies
View Related
Aug 30, 2010
Last night when I turned on my lap top (5 year old Acer TravelMate 4650), it was not able to boot up (10.04 LTS). No system files could be read and a lot of error messages was displayed. In fact, it has done a few checks for disk error lately during boot up, but no further warnings given. I gave up recovering, and simply re-installed Ubntu 10.04. I was wondering if this could be related to a virus attack?
View 9 Replies
View Related
Apr 28, 2010
I am using eBox at my Ubuntu Studio laptop to manage the manage server application configuration, but in the firefox browser, I put the Ubuntu server 9.10 ip address 192.168.122.1/ebox into the firefox, but firefox can not connect the server, but I saw my Ubuntu server icon in the network of the studio admin menu. and I put command sudo ebox at the command line of the server, but the server says 'command not found'
View 1 Replies
View Related
Mar 17, 2011
I have a Dell Dimension 690 with a LSI raid controller. I just added two 2Tb drives to the 2 160Gb drives that I currently have. The 160Gb drives used to be set up in a redundant raid configuration and are now set up as stand alone drives. The 2Tb drives are redundant raid. I installed Zentyal server software (formally eBox). It seems that the system is starting up OK but on booting I am getting the following errors:
[Code]....
I do not want to put data files back on the server if it has some errors that will bite me later.
View 2 Replies
View Related
May 3, 2010
I have a DHCP server that I only mildly trust, but its nice because it is an eBox server (I use it for DNS, DHCP, and smtp relay for my internals). I want it to issue all addresses (simply because I like the way it displays its leases in the WebUI's dashboard), but I want a fail-safe too. I have another server that is strictly an Ubuntu Hardy server (I use it for openVPN and nothing else) so I would like it as my backup dhcp server. I figure I'll install all the dhcp stuff on it and just stop the service (to include a sudo crontab @reboot script to stop it when rebooted).
And simple use a sudo crontab script to ping the eBox every 5 minutes to make sure its live, and if not then start the dhcp server. My questions: If I put the entry in my sudo crontab will the script execute even if no session is currently running (its obviously a server so won't have anyone logged in except for administration)? Also since it is in the root crontab it will be able to start the init.d service without having to sudo it right (IE the script only needs to say "/etc/init.d/dhcp3-server start" not "sudo /etc/init.d/dhcp3-server start")?
View 4 Replies
View Related
Jul 18, 2010
I upgraded my Ubuntu 8.04 LTS server to 10.04 LTS - rebooted and things ran good. I knew I had a few problems, but DHCP and DNS were booting up and working fine for me.I went to take a look at Webmin, but apparently that's been removed from support for Ubuntu 10.04 - so I thought, I'll use eBox. I realized that Ebox didn't have the network module turned on, so I tried to turn it on. I found out the installation was missing scriptaculous, so I got that and installed that and then turned on the network module.I then rebooted the machine - and now nothing. It hangs when I get to the load for Apache. I would like to disable the network module for eBox, but can't find documentation for how to do that from the command line - which I have to use because the damn box won't boot and I'm running from a Live CD.
View 4 Replies
View Related
