Ubuntu Servers :: EBox Cannot Connect - 'command Not Found'
Apr 28, 2010
I am using eBox at my Ubuntu Studio laptop to manage the manage server application configuration, but in the firefox browser, I put the Ubuntu server 9.10 ip address 192.168.122.1/ebox into the firefox, but firefox can not connect the server, but I saw my Ubuntu server icon in the network of the studio admin menu. and I put command sudo ebox at the command line of the server, but the server says 'command not found'
View 1 Replies
ADVERTISEMENT
Sep 27, 2010
Installing file sharing using eBox and get the following error:
[Code]///
View 1 Replies
View Related
May 13, 2010
I just installed eBox on the Ubuntu server 10.version, server reports is successfully finished installation, but I received warning message Not Found
The requested URL /ebox was not found on this server. Apache/2.2.14 (Ubuntu) Server at 192.168.1.100 Port 80
when I tried to open ebox web based panel in firefox on my laptop.
my Apache web server is running well, see,
It works!
This is the default web page for this server. The web server software is running but no content has been added, yet.
View 2 Replies
View Related
Jul 3, 2010
this is a simple fix i hope. all i need is for someone to give me the terminal command to install a module onto ebox.
View 3 Replies
View Related
May 3, 2010
I have a DHCP server that I only mildly trust, but its nice because it is an eBox server (I use it for DNS, DHCP, and smtp relay for my internals). I want it to issue all addresses (simply because I like the way it displays its leases in the WebUI's dashboard), but I want a fail-safe too. I have another server that is strictly an Ubuntu Hardy server (I use it for openVPN and nothing else) so I would like it as my backup dhcp server. I figure I'll install all the dhcp stuff on it and just stop the service (to include a sudo crontab @reboot script to stop it when rebooted).
And simple use a sudo crontab script to ping the eBox every 5 minutes to make sure its live, and if not then start the dhcp server. My questions: If I put the entry in my sudo crontab will the script execute even if no session is currently running (its obviously a server so won't have anyone logged in except for administration)? Also since it is in the root crontab it will be able to start the init.d service without having to sudo it right (IE the script only needs to say "/etc/init.d/dhcp3-server start" not "sudo /etc/init.d/dhcp3-server start")?
View 4 Replies
View Related
Jul 18, 2010
I upgraded my Ubuntu 8.04 LTS server to 10.04 LTS - rebooted and things ran good. I knew I had a few problems, but DHCP and DNS were booting up and working fine for me.I went to take a look at Webmin, but apparently that's been removed from support for Ubuntu 10.04 - so I thought, I'll use eBox. I realized that Ebox didn't have the network module turned on, so I tried to turn it on. I found out the installation was missing scriptaculous, so I got that and installed that and then turned on the network module.I then rebooted the machine - and now nothing. It hangs when I get to the load for Apache. I would like to disable the network module for eBox, but can't find documentation for how to do that from the command line - which I have to use because the damn box won't boot and I'm running from a Live CD.
View 4 Replies
View Related
Sep 20, 2010
In my ongoing hunt for a Samba GUI that is feature packed, well supported, easy to use, yet doesn't suck, I found myself tinkering with eBox. I have it installed and fired up but I'm a little confused. I can add a Samba share - okay great. But I sorta need to add users. Where on earth can I add users? The users and group section of eBox doesn't appear to be related to what I need, and I also cannot get into the access control section of the very share I just created.
View 3 Replies
View Related
Mar 9, 2010
Running Ubuntu 9.10 64bit server. Installed it as a minimal virtual machine. The 'nm' command does not exist in /usr/bin. Assuming this is because the nm command is not included in a minimal install. How can I install the nm command ?
View 2 Replies
View Related
Feb 7, 2011
I just recently installed Ubuntu for our server, and I had a question about using tcsh. I'm trying to run a script of commands and the first line of my script is: Quote: #! /bin/tcsh -f I chmod +x my script, but when I type the name of my script at the command line i get this message: Quote: myscript: Command not found. the only way my script will work is if I type: Quote: tcsh myscript
Only then, will myscript execute its set of commands. I would like to be able to type the name of scripts without having to type tcsh at the beginning, each time. Is there a way to do that?
View 5 Replies
View Related
Jun 20, 2011
I'm monitoring all kind of things like ( Mem, network, cpu, IOPS,..) But still not found a command where i can see the CPU usage but in MHZ ( or Hz). Using top or looking into /proc/cpuinfo doesn't give me the info i want.
View 4 Replies
View Related
Sep 5, 2010
I just installed apache2 and i can't restart the service, i get: Code: sudo: /etc/init.d/apache2: command not found
View 6 Replies
View Related
Oct 8, 2010
Bash acts weird in 10.04 server. Whenever I try to run .sh scripts, every empty line in the script results in "command not found". Then on even simple scripts I get syntax errors, but the same exact scripts work on my 9.10 desktop installation. There's also another problem, I'm not really sure if it's bash-related. After setting the proxy using
[Code]...
View 5 Replies
View Related
Oct 1, 2010
I installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
View 9 Replies
View Related
Jan 24, 2010
During install of 9.10 server, both ethernet adapters were found. One is built-in to the motherboard, the second is on a PCIe slot. Selected the on-board adapter for eth0 during install, set fixed IP on the web, connected, updated, etc. w/ no problems. The second adapter is for the LAN.BUT, on first and subsequent reboots after installation complete the second adapter is not detected at all, as if it were not even plugged into the PCI or the driver not loaded. This happens on either of two slots, with two different adapters, Intel or Netgear, both pretty recent, and both of which are detected and work in a different box. 'Ethtool eth1' says device not found.This is a fairly recent motherboard 3N78EM).Since the adapter was found during installation I'm assuming that the problem is not with not the board. I've built several server systems with two or three ethernet adapters and have never run into this situation.
View 3 Replies
View Related
Mar 26, 2011
I know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
My system:
Intel i7
Ubuntu 10.10 Maverick Meerkat
android-sdk-linux-x86
eclipse 3.6.2
View 5 Replies
View Related
May 6, 2010
In Ubuntu 10.04 grub command prompt setup command does not exist for installing grub.I am trying to recover my Feodra12 OS.Did anyone find alternate command for setup in grub command line for Ubuntu 10.04 ?
View 2 Replies
View Related
Apr 30, 2011
I installed the Berkeley DB on the Ubuntu server and tried to access the dbxml from the command line and it returns command not found
path/to/dir/dbxml-2.5.16/install/bin$dbxml
-bash" dbxml: command not found
Can someone point me in the right direction
View 1 Replies
View Related
Jan 10, 2010
I am a linux newbie, and recently started shell programming. whenever I use 'let' command it gives me an error 'command not found'. I am using ubuntu 9.10 with bash.
View 5 Replies
View Related
Mar 17, 2011
I have a Dell Dimension 690 with a LSI raid controller. I just added two 2Tb drives to the 2 160Gb drives that I currently have. The 160Gb drives used to be set up in a redundant raid configuration and are now set up as stand alone drives. The 2Tb drives are redundant raid. I installed Zentyal server software (formally eBox). It seems that the system is starting up OK but on booting I am getting the following errors:
[Code]....
I do not want to put data files back on the server if it has some errors that will bite me later.
View 2 Replies
View Related
Jul 29, 2010
I want to install CentOS on my ebox 3300. Ebox has this hardware:
* 1Ghz x86 CPU
* 256 MB RAM (512 MB available on Q2/2009)
* Support for 2nd NIC
* Integrated Full Clock FPU
[code]....
The specs below is for my Jr DX which includes the wireless option and 2x RS232 ports, plus I have a 1 GB Compact Flash and a USB-Serial usb unit (PL2303) plugged in.
cat /proc/cpuinfo:
processor : 0
vendor_id : Vortex86 SoC
cpu family : 5
[code]....
I want to install it from my 4 GB usb stick onto my 4 GB CF card. I dunno how to get CentOS correctly onto my usb stick. I have tried unetbootin method and method from centos wiki, but it does same thing - after loading vmlinuz and initrd.gz it reboots. But when I tried to boot from that same usb stick on my laptop, it worked. Has anyone some experiences with installing centos on ebox? Or does anyone know what to do with it? Gentoo for example boots correctly, but gentoo can't install of CF cards (live instalation CD hasn't it in kernel enabled) and doesn't know my ethernet card (same).
View 1 Replies
View Related
Nov 19, 2010
I'm trying to install the projectM visualizer and I'm running into some problems. Initially, I tried to install it by running "sudo apt-get install libvisual-projectm", which seemed to work... except there's no launcher for it in my Applications menu and "projectM-pulseaudio" returns "command not found". From there, I decided to try to build it myself, by following this guide (<- link). It went well until the "make" command, which returns the following error:
[Code]....
View 1 Replies
View Related
Feb 13, 2009
I have created a folder including some html link pages in /test/htlink . Now I want to create a soft link of that folder as htlink -> /test/htlink in /var/www/html . Now when I m browsing the folder , its erroring (404 Not Found) folder is not found on the server . I have given 777 permission on every file-folder in /test . No firewall & no SELINUX .
*** I want to browse the folder ***
View 3 Replies
View Related
Mar 22, 2010
I am trying to configure an eBox to act as an http proxy but having trouble using that proxy on client computers to browse internet. The ifconfig on ebox returns the following:
eBox141:~# ifconfig
eth0
Link encap:Ethernet HWaddr 00:0c:29:ee:64:f2
inet addr:10.45.48.108 Bcast:10.45.255.255 Mask:255.255.0.0
inet6 addr: fe80::20c:29ff:feee:64f2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:90045 errors:0 dropped:0 overruns:0 frame:0
TX packets:226 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7043548 (6.7 MB) TX bytes:35150 (34.3 KB)
Interrupt:16 Base address:0x2024
eth1
Link encap:Ethernet HWaddr 00:0c:29:ee:64:fc
inet addr:192.168.122.158 Bcast:192.168.122.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:feee:64fc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1123 errors:0 dropped:0 overruns:0 frame:0
TX packets:781 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:949754 (927.4 KB) TX bytes:92267 (90.1 KB)
Interrupt:16 Base address:0x20a4
eth0 is on the internal lan with the client from which I want to access the internet
eth1 is can access internet all right.
The ifconfig on a client returns
eth0
Link encap:Ethernet HWaddr 00:0C:29:46:58:7F
inet addr:10.45.48.102 Bcast:10.45.255.255 Mask:255.255.0.0
inet6 addr: fe80::20c:29ff:fe46:587f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:16014030 errors:0 dropped:0 overruns:0 frame:0
TX packets:835276 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1297106653 (1237.0 Mb) TX bytes:738158694 (703.9 Mb)
I configured the Firefox on the client to use eBox's ip address/port in the proxy settings but I still can't get on the internet.
eBox is on a vmware workstation 7. It is eBox 1.4.1
eBox has two virtual nics (above) - one is NAT (eth1) and the other is bridged (eth0)
The client is on vmware ESXi 4.0. It's an openSUSE 11.2.
View 2 Replies
View Related
May 29, 2010
I tried to install vsftpd on my server and while the installation went fine, I can't run
Code:
restart vsftpd
As I the get error
Code:
restart: Unable to connect to system bus: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory Though I'm able to restart the service with
sudo /etc/init.d/vsftpd restart with a warning telling me to use the service utility. Not only that, but despite the port being open it won't allow me to log in, it just hangs, and I have local users enabled (I've used the default .conf file). Does dbus not come installed in 10.04, and if I did install it would it make a difference for restarting the service? Are there further steps needed not available in the tutorial on the Ubuntu Server Guide for 10.04 to enabling local user authentication? -edit- Figured it out, dbus wasn't installed, vsftpd is working fine now.
View 4 Replies
View Related
Feb 23, 2010
I am doing some embeded linux work in ARM 9263.So I need to make a image for that board.But when I using one command "make uImage" I am getting the following error.
make: arm-linux-gcc: Command not found
CHK include/linux/version.h
make[1]: `include/asm-arm/mach-types.h' is up to date.
CHK include/linux/utsrelease.h
HOSTCC scripts/basic/fixdep
code....
View 4 Replies
View Related
Apr 26, 2011
I install and configure the vncserver following and reading 1000papers, but all of this present the same problem; when i try to connect to my vncserver,recive this mesage: unable connect to socket: No route to host (113) The OS version is Fedora Core 14 and tigervnc-server i try different solutions including:Allow TCP connection modifing files /etc/gdm/custom.conf and /usr/share/gdm/gdm.chemas Disable SELinux removing iptables Here follow the vncserver configuration:
[code].....
The ip address of the vncserver is correct because i can do ssh on it. Where or what can i do?
View 4 Replies
View Related
Feb 18, 2011
I am using Squeeze and all appears OK at first... I have a DHCP lease, PING to router works, apache servering fine in and outside the network, Epiphany seems to connects to default debian.org only, BUT I cannot connect to any other websites and apt will not connect to any servers. I installed once, tried to fix problem, gave up and reinstalled and still have the same problem.
I unistalled Network Manager thinking that was the problem, but still the same issue. Is there a default firewall blocking certain connections or am I missing something I'm supposed to know about? I installed some non-free firmware in the beginning of install and all worked... and I connected fine when downloading packages during install.
View 4 Replies
View Related
Nov 8, 2010
I'm wondering whether my server has been hacked by someone trying to cover their tracks. When I log in now, I get a message saying "bash: /bin/ls: No such file or directory", and although 'which ls' tells me it's '/bin/ls', it is as if the command does not exist. Note that this NOT a path issue: I get the error when typing '/bin/ls' (and '/usr/bin/ls', which I thought worth trying). I tried to 'sudo chmod +x /bin/ls' and the operation was not permitted.
OK, so thinking I'd somehow hosed things, I did 'sudo apt-get install --reinstall coreutils', hoping to reinstall ls etc. I get this:
Code:
Preparing to replace coreutils 8.5-1ubuntu3 (using .../coreutils_8.5-1ubuntu3_amd64.deb) ...
Unpacking replacement coreutils ...
dpkg: error processing /var/cache/apt/archives/coreutils_8.5-1ubuntu3_amd64.deb (--unpack):
[Code]...
View 6 Replies
View Related
Feb 18, 2011
I a new user of ubuntu.I got this strange problem when I was doing an installation. The command is just in the folder, but the installation says it's not there. I have tried to re-install tcl/tk package in ubuntu, but it doesn't work. Could anybody help me out on this issue
View 5 Replies
View Related
Mar 27, 2011
I downloaded ff 4 tar.bz.2 file ,extaracted to root opened firefox folder and ran from there,but ff 3.6 was still there so i used sudo nautilus to remove the old ver. Now to run ff i have to open root/firefox and there is a script file i use to run ff,if i type firefox in the terminal i get command not found msg.
View 5 Replies
View Related
