I am purchasing a Western Digital WD10EARS 1TB hard disk for use with Fedora 11. My questions is will I get good performance or do I need some tweaking?
This drive has the new Advanced Format with 4k physical sectors. Some people have had performance problems with these drives. I want to make sure Fedora 11 can format the drive corectlly.
I have just installed a Canon Pixma iP2200 on Fedora 14. The installation 'seemed' to go OK but whenever I try to print anything I get the following error:
"There was an error during the CUPS operation: 'client-error-document-format-not-supported'."
I have done a bit of searching and the only advice i could find is to uncomment some lines in /etc/cups/mime.convs and /etc/cups/mime.types but I don't have either of those files!
A neighbor of mine just got a Canon Pixma MP450 printer, to replace an old HP printer, and I am trying to get it to work with Fedora 11 installation from a machine they have borrowed from me. The printer gets recognized upon plugging it in but when I try to print a test page from the printer properties I receive the following error:'client-error-document-format-not-supported'
The driver that is selected for the printer is "Generic Driver" I have tried to select a driver but have not found any Canon drivers from the selection dialog box. After searching the web I see mention of a Canon MP150 driver working for the MP450 but I have not found this driver. Is there a driver I have to install from YUM or download from Canon? Are there others successfully using this printer and if so what have they done to get it to work?
I am trying to recover some data on some drives that are in the same LVM. When I upgraded the motherboard, I had complications getting the drives to all load under the LVM, and in the process I made the mistake of formatting one of the drives. The problem now is that the UUID changed on the drive so when I try to mount the LVM it can't find device with a certain UUID. When I try to set the UUID back to the old one it says 'Invalid UUID format'.
I can set it to a UUID generated through 'uuidgen', si I then noticed that the format of that UUID is different than the old one which I'm trying to set it to. Why is that? Is there a way I can get it to change to the old one in the different format?
The old format: yQtrVB-5jCk-vF10-05c2-AcDL-GNn1-ivdxxh
The new format: d5224587-a6cd-4a66-a12b-d7b75eec5871
My System Intel Core Duo E5300 Mobo - Gigabyte G31M-ES2L 1GB DDR2 800MHz RAM 4 x WD20EARS HDD I have been trying to install Fedora or Ubuntu for over a week. I thought it would take an hour and i would be away. I have been trying to install using the mdadm Software RAID feature. Everytime it takes about a day to format the drives and then i get an installation error. The drives state they are ready to use as is on any operating system other then WinXP, but this does not appear to be the case.
I am very new to Fedora... I have been doing some reading.[URL].. That information has been promising. I have been able to get into Fdisk off the live CD but i can't figure out how or if it is possible to do what i want it to.
Has anyone had any luck getting these drives to function correctly in a software RAID? I have had good luck with WD drives in the past and just assumed these drives would do what i wanted to but alas i have been proven wrong.
The partitions i wanted was...
- A 2GB swap parition
- A 10 GB RAID 1 partition for Fedora
- The remaining space as a Raid 5 for files.
Am i just banging my head against a wall here, or is this possible.
my school we want to print a magazine but we have problem with the format of the files. We need to create a sheet in A3 format from two sheets in A4 format. I was reading about the pdftk library but it doesn't do what i need.
View 4 Replies View Relatedgetting this error"Error creating file system: helper exited with exit code 1: cannot spawn 'mkntfs -f -L "Backup" /dev/sdb1': Failed to execute child process "mkntfs" (No such file or directory)"tried to run from terminal and mkntfs is not in the system. I am trying to make an image of my system using dd and its over 4GB.
View 2 Replies View RelatedI need to convert a .jbg image to something else more 'generic' (.jpg, .png) but i discover that thar format seems not to be supported by default. Searching i found that i need jbigkit, so i download it but know dont know how to make it work?
View 2 Replies View RelatedI have a 2TB Seagate GoFlex Desk External HDD. I want to format it. Which is the best disk format, which will be supported in all OS, like Windows, Linux and Mac?
View 2 Replies View RelatedI don't want to install anything more,so I want to convert the unsupported video file to supported one. I currently using lucid.
View 2 Replies View RelatedUbuntu 9.04 server (64bit)
8GB
(2) 320 WD HDD - RAID 1
After coming home one evening I found my server was turned off. My suspicions lead me to believe we had a storm and the power went off, then the UPS went off and finally at that point the server went off too. I think my server was set to allow security updates. After it turned of and restarted it seems it made a change to Grub and upgraded it to Grub2. In doing so I now get the following message:
Error 13: Invalid or un supported executable format
I have tried to do the following:
url
This solved the problem for me, from > url
Quote:boot from the live medium and chroot into the Linux installation:
$ sudo mkdir /mnt/linux
$ sudo mount -t ext4 /dev/sda1 /mnt/linux
code....
Then, the following command should resolve the issue. :
$ sudo grub-install --recheck /dev/sda
I suspect this is not new but I just can't find where it was treated. Maybe someone can give me a good lead.I just want to prevent certain users from accessing CD/DVD drives and all external drives. They should be able to mount their home directories and move around within the OS but they shouldn't be able to move data away from the PC. Any Clues?
View 2 Replies View RelatedI have Fedora 14 installed on my main internal drive. I have one Fedora 14 and one Fedora 15 installed on two separate USB drives.When I boot into any of these drives, I can't access any of the other hard drives from the other drivesll I can, but just the boot partitions.Is there any way of mounting the other partitions so I can access the information?---------- Post added at 12:42 PM ---------- Previous post was at 09:34 AM ----------I guess even an explanation on why I can't view them would be good too.
View 7 Replies View RelatedI have a nice computer i have been dual booting between either ubuntu or win7. i am wanting to remove win7 and install winxp sp3, so i can use media center with my xbox. i preferred that win7 work, but since my copy is not genuine, its authenticity is believed to be the culprit in connection errors with the xbox. i have not been able to find a linux alternative, which i doubt even exists due to the proprietary nature of the xbox.
So, my question is how do i reformat the win7 hard drive? are there issues i need to worry about that may reformat both hard drives on accident? and when the hard drive is formatted, will i be prompted to choose which hard drive to install win xp on?
I am trying to install windows 7 over Ubuntu, however when i run the install disk it tells me that my hard drive is not formatted in the correct format. I have then loaded up Ubuntu, tried to re-format using Gparted and it won't let me re-format my hard drive when I right click on it. The only option I get when right-clicking is to unmount the drive.
View 7 Replies View RelatedI decided I could get by without WIN7 on my computer on a permanent basis, so re-installed Fedora 14 on drive SDA (Drive 0), previously occupied by WIN7, and formatted all other drives in the system (SDB, SDC, and SDD to EXT4.The install went well, and everything is working except one thing - I cannot get SDB,SDC or SDD to copy files one to the other. The message I get is that permissions do not allow this process. The automount works OK, and I can access the contents of individual files on these drives, but as far as copying goes, there is no go.What other parameters do I have to add to the automount in /etc/fstab to allow for this read/write function, or am I looking in the wrong area entirely?I have searched these forums and the Internet in general, but I cant seem to find anything specific to this problem.
View 9 Replies View Relatedhow to format flash drives in ubuntu. In windows there was a "format" on the right click menu but I did not find one in ubuntu. i am using ubuntu jaunty.
View 4 Replies View RelatedI have 2 drives mirrored via windows software raid and I plan to toss the drives into an Ubuntu server soon where they will also be mirrored. The server will have another drive for booting. What is the best way to get these mirrored drives into ext format while preserving my data? I plan to use software raid in Ubuntu as well. My only idea is to format a 3rd drive as ext and copy all the files over, seems inefficient though.
View 1 Replies View RelatedI ran a live cd of linux mint 8 and had overheating problems. Has anyone ran Fedora 12 on a notebook with an i7 cpu?
View 14 Replies View RelatedWhich is maximum RAM supported by Fedora 64 and 32? always say the minimum values but not the maximum. WHY?
View 10 Replies View RelatedI have a server with 3 hard drives
1 400GB
2 1TB
The 400GB has the OS and SWAP while the 1TB are going to be used as storage....
Now for the problem, when I have both the 1TB drives in I can not format or mount either 1TB drives. Says Device is in use or "The device file '/dev/sdc1' does not exist"
Now if I take one of the 1TB drives out I can format, partition, and mount it no problem...it only seems to be a problem when both drives are connected...
Ubuntu Server Linux 9.10
Code:
Code:
Code:
i need to shred (or at least do a low/high level format) the drives before giving them to my parents (because they know about undelete and stuff). so, what apps can i use in ubuntu to do this?
View 4 Replies View RelatedI just got a new DVD burner and decided to get a cheapest burner (an LG SATA burner) I did not have much preferences on either IDE or SATA so I just got a serial ATA. K3B burns DVD's just fine, but the speed is pegged at 1x even though writing speed specified was 8x. Device buffer is fluctuating from 0 to 80% all the time, which seems to suggest that the data is not being fed into the drive at good sustained rate to write faster.
I tried:
hdparm -d /dev/sr0
which I got:
/dev/sr0:
HDIO_GET_DMA failed: Inappropriate ioctl for device
doing:
hdparm /dev/sr0
[Code]....
My brother is a linux master and the computers I get handed down are obviously all use linux. I am trying to play a wmv file on my comp. I just downloaded mplayer but it seems not to work. I have movie player as well but it tells me the file is not supported. Read about w32codecs but they seem not to be available anymore. Maybe I need to convert the wmv to mpeg but yet I don't know how.
View 11 Replies View RelatedI have a problem,I want to change the hour format from 24 hours to 12 hours, I cant find the way to do this,
View 14 Replies View RelatedI have some .mp4 files. While open this file using vlc-player the resolution is fine. Then I convert this .mp4 format to .avi format using "ffmpeg". While open the .avi file using vlc-player the resolution is not fine.
View 3 Replies View RelatedI'm having problems with NX, it's doing strange things, trying to connect to some IP host in timbuktoo because my DNS provider's DNS sucks AND because NX is looking up the host "localhost" without first consulting my hosts file (which nsswitch explicitly tells it to do). THAT's all beside the point.
To work around this apparent bug in NX I tried creating an iptables rule to redirect traffic destin for a certain IP (10.x.x.x) to localhost (127.0.0.1) with the following rule: iptables -t nat -I PREROUTING -d 10.x.x.x -j DNAT --to 127.0.0.1. After adding the above rule, my attempts to connect to that host continued to get routed right off into the internet where I DIDN't want them to go. Instead of being redirected to the localhost/loopback address.
It seems DNAT to localhost is not supported? A Google search reveals many other people having this issue but blaming it on everything but iptables. I'm proposing that it's not supported, by design or not, to redirect traffic from a NIC to the loopback network?
will Fedora 12 support my processor, an Intel Core i7-720QM Quad Core?
I'm using an HP 2009m 20" widescreen monitor, and have a Nvidia 8500gt video card. Latest Nvidia drivers from RPM Fusion are installed.
My problem is that the only widescreen resolution I have a choice of in both nvidia-settings and gnome's "Display preferences," is 1600x900. While this is fine for desktop apps, my video card doesn't handle games very well at that resolution.
So, I know my card and monitor are capable of displaying other widescreen resolutions (such as 1360x768) because they work in Windows 7, but Fedora doesn't give me the choice of selecting them.
Is there a file that Fedora uses to determine the supported resolutions? How would I be able to select resolutions that I know are supported (at least in Windows 7)? Can editing xorg.conf give me this ability?
I just looked in my xorg.conf, and it's surprisingly slim compared to others I've seen.
Here:
Code:
I have compiled the OpenJDK with NPPlugin support for fedora 12. It works very well in Firefox 3.6. I would like to share it with you. Download the RPMs from the output of koji and run: #yum localinstall java-1.6.0-openjdk* It will upgrade your openjdk. The plugin can be used in Firefox 3.6 in both remi's rpm or F13's firefox,
[Code].....