When I change the boot up theme in plymouth from the default, Fedora will not give me a login screen, or leave the plymouth splash screen, I like the spinfinity theme, however when I set that I cannot get to the login screen unless I hit esc when it is booting and never let the splash screen come up. This happens with both gdm and kdm. Anyone else having this problem?
View 2 RepliesThis happens on boot on Fedora 15. Plymouth Boot Screen just stays there and I can't login. Searching around suggested kmod-nvidia to cause this (one moth ago ofc), but here I am with Intel Graphics and the default drivers.
View 6 Replies View RelatedWell this problem has been here since Lucid. When I start up my computer and select Ubuntu, I get a blinking underscore for about most of the start up time for Ubuntu. Then It quickly shows the nice Ubuntu Loading Screen (Plymouth) for about two seconds, then it gets to the login screen. I am using the Open Source ATI drivers, I believe the open drivers are called "radeon".
View 5 Replies View Relatedreally wish to customize my GDM for ubuntu 11.4 but failed to do so.....therefore i decided to use alt. such as SLiM.....I could install it properly in virtualbox but when i went to do it on my real ubuntu 11.4 ......the screen stops at plymouth theme or goes blank after loading plymouth theme......then i read further more blogs and made changes and now even if i configure SLim the GDM starts no matter what i do .........
PS : I am new to ubuntu and dont have any knowledge about scripting programming and stuff....
The problem come after i kill the Xorg using the kill command,and the screen turns to black without anything so that i can do nothing. The problem goes on after reboot
View 5 Replies View RelatedI fixed this issue on 10.04, but just recently (1 hour ago) upgraded to 10.10 and am having the same issue. Machine boots fine, but the screen is blank for most of the boot, and plymouth is up for about a half second before I get to the login screen.I've tried searching the threads, but for the life of me I can't find the solution and can't remember what I did to fix it on Lucid.
View 4 Replies View RelatedI just installed Kubuntu 10.04 on my Desktop computer. Prior to KDM loading, all I get is a blank, black screen with no Plymouth splash screen. I'm confident that this issue is not related to KDE but would apply to all Ubuntu variants. Here are my computer specs:
Kubuntu 10.04 x64 running with all updates
Dell Studio Desktop
Intel Quad-Core Processor 2.66Ghz
8GB ram
Intel Integrated Graphics
I should note that I have full desktop effects running smoothly under KDE with compositing enabled, so my integrated graphics is not necessarily the problem unless Plymouth is not loading the graphics drivers successfully.
I am trying to boot in to ubuntu 10.10 from a usb on my desktop but i can't seem to get past the purple screen with "ubuntu" and the flashing dots. The purple dots scroll for a bit but then all turn purple. I'm trying to do this on a hp compaq with a pentium 4 and from what i can tell nothing is wrong with it.
View 1 Replies View RelatedI am trying to install fedora 12 on my computer. I have burned the live cd ISO and it works just fine until right before it shows the login screen. I suspect that it may have to do with my ati radeon 9800 graphics card. give me some boot options or some such thing so that I could install fedora on my computer. Also some other specs
ASUS A7N8X Mother Board
AMD Athalon XP
1GB ram
I'm currently running Linux Mint 10. Since I have an nVidia graphics card, I installed the driver and used this fix to fix the Plymouth bootsplash afterward because it was in text-mode for the bootsplash. I have since installed and configured e4rat to cache files at boot. It seems to have sped up things considerably, but has also re-broken my bootsplash. The resolution is correct, and plymouth is running, but the splash doesn't show.
Is there a way to get Plymouth using the uvesafb driver AND play along with e4rat?
I am using 64-bit Linux Mint. My copy of e4rat is compiled from source because the prebuilt package was 32-bit only My graphics card is nVidia 9800M GS (notebook) The splash screen appears during shutdown as it did before. It's only the boot splash that is affected.
I have searched the forums on this problem and I am still not really clear on the fix for this or even if I should wait for final release. I am running Lucid 64bit and have upgraded through the cycle from Karmic. I am using nvidia proprietary drivers. All the time that the Plymouth boot screen has been available it has been in low resolution. As we are now at beta 2 I am torn between searching a fix or waiting for the final release. So, from what I have read I need the 'nouveau' driver to fix this issue.
1. How do I install this in place of my existing nvidia proprietary driver?
2. I am a little bit confused by the hardware drivers selection panel telling me that I have an nvidia driver installed but that it is not in use-I read that this might be a bug?
quite a while ago i decided i wanted to change my splash
View 1 Replies View RelatedTwo things.First off, since 10.04, no matter how many times I try to change the keyboard layout to United Kingdom, when I log back in the @ and " signs are ALWAYS in the wrong place.
Second off, I installed the NVIDIA proprietary driver to allow Compiz to work, except now my Plymouth Screen is a lot of ugly text.
I recently bought a new laptop with an ATI Mobility Radeon 5470HD graphics card in it and installed ubuntu. Everything works just fine, but at the startup, no plymouth splash screen comes up, just a black screen with a white dash...
View 4 Replies View RelatedThis problem started within the last few minutes. I run a program in my browser that uploads data from my machine (ubuntu) to another machine (Fedora 13), for manipulation and then spits back the data that does not match our standardised information.
When I tried to run it a few minutes ago, it seemed to take a long time to make the connection. I went back and checked the machine, everything was connected and fine. I decided to reboot the machine from within KDE and then try again. Same result. I went to the machine again and tried to login through KDE, the screen goes black for a few seconds and then returns me to the login screen. I switched over to a virtual terminal and was able to login using the same credentials. I checked the .xsessions-errors file and this is what I am seeing:
[Code]....
My last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
I've got a HD screen: 1920x1080p. Grub (1.98 ) has the resolution: 800x600 and Plymouth also. It is irritating me that plymouth shows a very ugly purple splash screen in a very low resolution (800x600). How can I fix that? I've got an ATI Radeon HD 4670, and use the drivers from ATI...
View 8 Replies View RelatedSince upgrading from 9.10 to 10.4 and then on to 10.10, I have only ever seen an uninspiring purple screen (current.jpg, except mine says 'Ubuntu 10.10') as my boot splash image. I have downloaded different themes for Plymouth, selected them, and then updated 'initramfs' (screenshot), all to no avail. I also recently installed Nvidia drivers, but nothing changed. Is there something I'm missing?
View 5 Replies View RelatedI already had Plymouth issues on 10.10, which was solved by this script [URL]
After upgrade, boot only gave me a blank, purple screen, so I used his revert script then tried this : [URL]
But I'm only getting a black screen. Removing vga=795 option only make it stay purple. It might be because of the multiples workarounds I tried back in 10.10, but I don't know how to clean that up. I have an ATI HD Radeon Pro 2400 card with free drivers (but I was using the proprietary ones during upgrade).
Is there a way to install Plymouth Boot screen for centOS 5.5 ?I am unable to get any RPM for CentOS.Fedora has it but CentOS doesnt.I tried compiling it from source but I get an error that libpng 1.2.16 >= is required for this. Unfortunately even that is not there in CentOS.Only 1.2.10 is there for CentOS.
View 2 Replies View RelatedI followed the instructions given at http://linuxhub.net/2010/06/fix-big-and-ugly-plymouth-in-ubuntu-10-04-lucid-lynx/ for fixing my ugly plymouth screen after installing Nvidia drivers. All worked as expected. However I made some modifications in the instructions as I required.
Code:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
I used 1366*768 instead of 1280*1024.
[Code]...
i decided i wanted to change my boot screen and i installed plymouth themes and used solar and now that i dont like any of the Plymouth themes, i want the original purple boot screen back but i dont know how and it would be awesome if somebody could tell me P.S I'm a bit of a linux noob so sorry if i got anything muddled up lol
View 3 Replies View RelatedI would like to post my problems here with Fedora 11 regarding that I am using Dell inspiron 1525, Dual core-N series. I have got two problems:
First;- After I updated my system, I have experienced a a login problem , which is each time I try to login and insert my password correctly it seems that it will login but it comes back to the same login screen as if I did not do anything, but after too many times it works.
Second: I read some posts in a website that talks about configuring the RPM fusion "Repo" and I did all the steps posted there , but after that whenever I try to update or download anything through terminal.... it appears the following:
[Code].....
I have installed VirtualBox and setup a Windows Vista host, initially with a .vdi of 10gb. That filled up quickly, so I added another 20gb secondary partition, after first trying to allocate a .vdi to a SCSI controller. Configured the drive in Windows (Computer Management), and all seemed ok. I shutdown VB, and rebooted my Linux host (openSuse 11.3). Now I keep bouncing back to the login screen, and can't login to Linux KDE, but can login to a console.I do have the following info:
/etc/fstab:
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part5 swap swap defaults 0 0
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part6 / ext4 acl,user_xattr 1 1
[code]....
I did see a message before, that I don't see anymore, that said it could not start NFS services due to missing entry in fstab. Another I'm seeing now is it couldn't start the avahi-daemon, no space left on device. This is odd, since I have a 200GB drive, with half of it left, only max 30GB set to VB. Here's my df -k output:
/dev/sda6 Use% is 100%
devtmpfs Use% is 1%
tmpfs Use% is 1%
/dev/sda7 Use% is 46%
So root "/" is mounted on /dev/sda6, which looks like it could be a problem, but why would this suddenly be a problem after working with VirtualBox? Could this be a matter of just freeing up space on /dev/sda6? Like the /tmp folder that's under "/"?
I followed this workaround for Nvidia cards and the boot screen
[url]
Everything worked fine, except at boot, the splash screen doesn't fill the entire monitor. I set it to the native resolution of my monitor, 1920x1080. Its just not stretched fullscreen.
I have a problem with Plymouth. It works pretty well on low res, but on higher resolution some strange video artefacts appear - see attachments.
I use ATI proprietary drivers, if it has something to do with it.
The resolution is set in /etc/default/grub like this:
Code:
GRUB_GFXMODE=1024x768
GRUB_GFXPAYLOAD_LINUX=1024x768x32
edit: reducing colour depth doesn't help /end edit
I don't know whether it has anything to do with the current problem, but Plymouth used not to appear at all until I followed these instructions (or actually I took them from another thread but I can't find it at the moment and these are the same).
I don't know whether it's possible to take them during booting so I've taken these photos with a mobile and retouched in gimp to remove reflections (more or less), and since I'm no pro photographer nor photoshop/gimp master they look as they look. They should do to demonstrate the problem, though.
I have a desktop running Hardy and till friday it was running good. Today is monday and I guess it has got monday blues like I get every monday at work.Today I tried to start it as usual but it just refused to go further than login screen. I just can not login. It just hangs it there. I do not know what has gone wrong. I did not change anything since friday and no one else uses it. Theres nothing in logs that could give any idea. It just hangs without any reason and is still on the login screen for ever. It does ask my username and password but then it does not go further.But to my surprise I tried logging in with root and it gave me expected error that system administrator is not allowed to login from gnome.
View 5 Replies View RelatedI am having trouble with the login screen. After I enter my password and click login, I hear the opening chime in fedora, then my keboard lights flash on and off and my screen goes blank for a minute, almost like the machine is rebooting, then goes right back to the login screen. Sometimes I have to do this 5-8 times before I finally get into the desktop, other times it works the first time.
View 12 Replies View RelatedI was messing around with the screen orientation and thought it would be funny to orient it sideways. Big mistake The screen went black.I can force a shutdown, login and I get the same black screen. I tried hooking up an external monitor and the monitor showed no input so I'm guessing my laptop doesn't have that capability with Fedora.This is my main computer.
View 14 Replies View RelatedIt's two days now I'm in deep troubles after my last "yum update". The system boots as usual, the graphical login pops up the normal way but no input is handled by either the internal keyboard (the system is a laptop), the mouse pad, the external USB mouse and keyboard.
The hardware itself seems to be working as I can pop up the BIOS menus and even edit the GRUB booting line. But, after GRUB there's no possible input. I've tried to boot the system with the Fedora 11 DVD, rescue menu and then chroot. This in order to run a "yum update" in the hope that the problem was in some broken update. No chance: there's no update.
My questions are:
1. Is there a way to boot Fedora withou any graphical interface from GRUB (or anything else to skip the KDE)?
2. Is there a way to have the (cabled) network activated at boot *before* the graphical login?
3. What the he** is happening to my otherwise pefectly working laptop?