Fedora :: External Drive Seen In Mint But Not 14?
May 15, 2011
I have a computer with an Asus M2N68-AM plus mother board running Fedora 14 that will not show external usb flash drives or hard drives when I plug them in. I used to run Linux Mint 9 on this computer and switched to Fedora because of easier LVM support out of the box. Mint would mount these devices just fine.
To simplify the issue and rule out anything I did since the installation, I tested this on both the Mint 9 live DVD and Fedora 14 live cd (both 32-bit versions, if that makes a difference) with the same results.
Just to be clear, I'm still somewhat new to Linux. I'm reasonably sure it's an issue with seeing the devices in the first place and not just an auto-mounting problem.
View 5 Replies
ADVERTISEMENT
May 30, 2011
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
View 13 Replies
View Related
Mar 30, 2011
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies
View Related
Apr 19, 2010
I'm new to the world of Linux, but am intrigued by the variety and functionality it offers over Windows. I have an external HDD from which I would like to dual boot Linux Mint, with Windows Vista (64 Bit) remaining on the primary internal HDD. I know that my BIOS supports dual booting and booting from USB devices (my external HDD). Are there any specific dangers I need to be aware of? Is it as simple as putting in the installation disc and selecting my external HDD?
View 9 Replies
View Related
Jul 15, 2009
I started to install Fedora thinking I was just going to place it in the / and /home partitions I already have but the installer only seems to give me the option to use the whole disk.I have 3 / and 3 /home partitions 2 of each are occupied by Linux Mint and Mint KDE so I wanted to use the last / and /home for Fedora.
View 6 Replies
View Related
Aug 9, 2010
I have a DWA-130C (external wireless) and am trying to install the drivers for us in Linux Mint, I'm assuming this is done with ndiswrapper, but I have no idea what I'm doing. I am a begginer to Linux though I know the basics of using the console, packages and such.
View 2 Replies
View Related
Apr 26, 2010
I got Mint 7 running on my Laptop, a Pentium 4 by Dell. It dual boots XP as well. But the mobile broadband which connects by the USB port only works in XP. There are small windows that say it will not run. Errors. How can I get this working in Linux?
View 1 Replies
View Related
Jan 14, 2009
I have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
View 14 Replies
View Related
Apr 15, 2011
I need to re-format an external drive. All the instructions I have found start with figuring out where the drive is mounted (sda, hda, etc.). However, as soon as my RH Linux machine sees the drive's format (ntfs) it decides it won't even mount it in the first place. Gives me an error message. Also, the drive doesn't show up at all via "df -k". how to convince RHL to be a little more accepting?
View 5 Replies
View Related
Aug 11, 2010
Does anyone know how to rename an external usb hard drive?
View 3 Replies
View Related
Sep 28, 2009
I have a Western Digital Pasport 320 GB hard drive. I wanted to create a live installation on it like a USB stick. I wanted it to serve as a portable OS that I could use to boot any other computer off of, and use it for diagnostics and anti-virus scanning on Windows based computers. The additional space is for my own personal use, kind of like having a mobile desktop where I have all of my documents in one place.What I need to know is how to set up Fedora 11 so that the hard drive will boot on most PCs regardless of their architecture. I also need to know what's a good Anti-virus to install onto it for the sake of fixing Windows hard drives.
Please keep in mind I'm a noob when it comes down to a lot of things, so if there's an antivirus I have to install manually, please included a step by step.
View 1 Replies
View Related
Aug 3, 2009
Background is this: Laptop has an internal h/d (obviously) so I removed it from laptop. Then set Bios to boot from external h/d. Installed Fedora 11 on ext. h/d no swap partition as drive already has 4 partitions. Fedora ran lovely!! I then replaced internal hard drive but left bios to boot from external hard drive. Boot screen for fedora came up, hit enter and fedora started loading. The little balloon started filling up, got to a quarter full and then screen went black. Had to reboot to get going again,same thing happened. Can anybody tell me what may be causing it,i.e. black screen. Fedora boots up and runs lovely with internal h/d removed. Any help very gratefully received. M/c has intel dual core processor, 3 gig of ram.
View 2 Replies
View Related
Jan 17, 2010
I'm having an issue with LVM on an external USB drive. When booting, the system drops into a recovery console if the external drive is not powered on because it cannot find the volume group and members. The setup is one system drive with fedora 12 installed, one internal data drive; LVM volume group vg1 with 5 partitions and one external backup drive LVM volume group vg2 with 5 partitions. Both the data drive and external backup are the same size and identical layout.
I use an rsync script that I wrote to execute backups (mirroring actually).
fstab is set 'noauto' on the external partitions.
I am new to LVM and I'm stumped as how to make the system 'ignore' the external drive at boot, if not powered on.
View 1 Replies
View Related
Jun 19, 2011
I have windows on my box, I have fedora 14 on my external that goes through my usb. Grub is installed on my usb. Since the only thing stored on my external was fedora i really didn't have to do much to it. just go into bios and boot from usb. Now that im using fedora more, Id like to add Vista to my choices. I guess the numbers change once your using an external drive. Ive read some of the problems like mine but they didn't quite do it. Im going to inclose 2 screen shots of my drives/partitions and my grub.conf.
# grub.conf generated by anaconda
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
[code]....
View 2 Replies
View Related
Oct 15, 2010
i have a 1 TB external hard drive and i have created 4 partitions as 3 of 300 GB , and one of 100 GB and i have format it as FAT but it is not showing 4th partitionand when i use fdisk -l it shows it as linux partitions and they are mounting in linux onlywhen i use the drive in windows , disk is not able to mount
View 3 Replies
View Related
Nov 3, 2010
Installing in external drive at the point where to put the GRUB loader I have these choices :
1. Master Boot Record (MBR) at -dev/sda (internal HDD)
2. First Sector of boot partition - dev/sdc1 (external USB HDD)
How can I put MBR in sdc instead of sdc1?
View 2 Replies
View Related
Jun 20, 2009
I am thinking about using aida to nuke my drive and then I'll re-partition it with gparted. I don't want to lose my 15 GB installation of Fedora Core 10 in the process and have an external 80 GB drive. How could I back up Fedora to this drive with the intention of copying it back to my internal drive?
View 2 Replies
View Related
May 29, 2009
I have a server which currently has a samba share for a printer and my home directory. Both have been working fine for a while now. I have a drobo (which is like a little USB RAID machine) connect via USB to the linux box. While trying to share it via samba I get weird messages from my windows machine (see screenshot). I have tried to share multiple folders on this drobo and no luck, all the same result.
I also tried a symbolic link, no good.
Here is a screen shot
http://aivila.com/temp/screen.jpg
Here is my smb.conf file:
Code:
[home]
path = /home/savona
read only = no
[Code]...
View 12 Replies
View Related
Dec 1, 2009
I would like to backup up my linux files to an external hard drive from a laptop. What would be the most simple and easiest way to do this? How would I format an external hard drive in linux.
View 4 Replies
View Related
Aug 17, 2010
I just had a fresh install of Fedora 13 x86_64 on my notebook after using fedora 13 x32 for a while.I am using KDE Desktop.Everything seemed to be working fine out of the box except for minor problems with sound and plugins.The biggest issue is that Fedora does not recognize when I plug an external USB HDD (WD 320 GB for this matter).The USB light on the HDD does not go on, and nothing is auto mounted.It seems that USB does not work at all - I have tried to plug another USB device and it didn't seem to have power.
View 2 Replies
View Related
Dec 23, 2010
I have an external hard drive that is connect to my laptop through USB port. But it won't show in my folder. I've looked every where but could located.
View 1 Replies
View Related
Jan 23, 2011
I am having the following problems with samba.
1. I cant share a folder on an external USB drive. (I have no problem doing so in UBUNTU)
2. I cannot seem to get Samba Swat to work.
I've Tried 127.0.0.1:901
my ip address:901
severname:901
I made sure that xinet was installed and started as well as smb and nmb. I can access other shares on the server just cant get samba swat to work nor can I set up a share on an External USB. I can access it from my side but not my Wifes side. I even made the root of the drive a share like so:
in smb.conf
[FreeAgent Drive]
comment=Shared Server Drive
path= /media/FreeAgent Drive
read only = no
browseable = yes
create mask = 0777
directory mask = 0777
valid users = argedion, perky
what am i missing or doing wrong? I have a simular set up on a server running UBUNTU 10.10 and it is sharing paths from a USB external. (note: I did not have to share the root of the drive in ubuntu.)
I know that Fedora is not UBUNTU nor GOD willing will it ever be. forgot to mention that firewall is off and i cannot access it even as root
View 14 Replies
View Related
May 27, 2011
Running fedora14 on a dell latitude-d600 laptop and I'm trying to access a 500gb sata external hard drive that is connected via usb. The laptop can see the drive as '500 GB Hard Disk: 524 MB Filesystem' and it's clearly mounted under the '/media' directory. However, when I attempt to read the files on it, I am only able to see the 524mb section of the drive. The external hard drive is an ext3 file system (running fedora13) and I believe it's encrypted.
View 14 Replies
View Related
Mar 24, 2010
I've got this hard drive that I know that is formatted to either ext3 or ext4, but I want to find out which format it is. I'm unfamiliar with many commands, I tried 'fdisk -l' but it didn't yield any useful information to me. Is there a command wherein I can easily find out the format of disks?
View 3 Replies
View Related
Jan 16, 2011
I've been trying to get a cold backup of a 1TB database this weekend, started the whole process Friday and still have yet to get a single device backed up. I'm using rsync to copy files from my /u17 thru /u29 mounts, and the usb is formatted ext3. Each time the rsync would start off fine but after about 30 minutes it would fail with any number of errors but the most prevalent is "Read only file system", "broken pipe". Here are samples:
rsync: writefd_unbuffered failed to write 4 bytes: phase "unknown" [sender]: Broken pipe (32)
rsync: write failed on "<path to one of my .dbf files" failed: Read-only file system (30)
rsync: chown "<path>" failed: Read-only file system (30)
rsync: rename "<path of .dbf> -> <rename attempt>": Read-only file system (30)
rsync error: error in file IO (code 11) at receiver.c(305)
rsync: connection unexpectantly closed (16787 bytes received so far) [generator]
rsync error: error in rsync protocol data stream (code 12) at io.c (359)
I've unmounted and remounted a number of times and kicked off the rsync again and it goes about 30 minutes and I get the same errors. This was all as user 'root', so I tried to do the rsync as user 'oracle' and I get the same thing. After looking into the device as it is recognized, it is being picked up by multipath. Would the fact that a usb device is being managed by multipath be a problem? Currently it is mpath15. How would I add usb devices to the mpath blacklist? The usb is being assigned /dev/sdbj but I'm worried that it would change at a reboot. I've searched the web for all of these errors and still no answer.
Note: I've also just tried to do a copy using 'cp' and got the same "Read only file system" errors. I can sometimes touch a file and sometimes I can't. I want to try and get this backup done this weekend.
View 9 Replies
View Related
Apr 25, 2011
I have a hard drive from a server that had a severe hardware failure. I have it attached via usb to the new server. I need to dump the database from the hard drive to a .sql file and then import the dump into the new server.
/mnt/external_drive/var/lib/mysql/ mysqldump -u root -p database name > backupdatabase.sql
My problem is, I enter in the root password, and it gives me an access denied error. I know this is the root password because that is how I am logged into the server. How can I test the credentials of the database that is located on the external hard drive? And, I've used all the credentials that could open this database (database user and root user) and still no go. If I can never get the password for the database on the external hard drive, what are my options?
View 1 Replies
View Related
Apr 9, 2009
I have got a hold of a extra hdd along with a hdd enclosure. I have tried looking for information on how to install linux on to one but haven't been completely successful on my search. So I turn to all of you. I was also wondering if its possible to have it were I can use it on multiple computers so I can use it for computer repair.
View 3 Replies
View Related
Aug 28, 2010
I have a cron backup scheme in which I rsync, then tar, then copy files on my internal hard drives to an external (USB) drive. When it works, it works. But I often get a "Permission Denied" message for all of these tasks. how the external drive is auto-mounted so I edited the etc/fstab so that the owner of the cron job is also the owner of the external drive (I think. Unfortunately, I'm not at that machine right now (it's at work), I can't give the exact fstab line (I will post it as an update to this thread next time I am at the machine).) BUT, I still get times when the cron backup runs fine and other times I get the Permission Denied. This is a shared machine that is dual-booted, so what I *think* is going on is that when the machine is rebooted to Fedora, but nobody logs in, I get a Permission Denied for the cron backup. It seems like on days when someone has logged in as the main user and left without logging out that the cron backup runs fine.
View 8 Replies
View Related
Mar 31, 2011
I have been a Linux user for about 6 years now, and recently switched to Fedora just to try something new. I used Ubuntu for the majority of the time so I am somewhat familiar with the command line, but seem to be having trouble with my external HDD. Ubuntu automounted it no problem. Fedora doesn't seem to like to do that. I tried searching and I did what almost every thread insisted upon; which is mount /dev/sdb(that is what dmesg said) but it says already mounted or /mnt/busy. So this is the extent of my Terminal experience with mounting an external drive, and I am completely dumbfounded as to why it simply won't mount. I am liking Fedora so far and so long as there is a remedy for this I don't plan on going back.
View 3 Replies
View Related
Aug 7, 2011
I've got two external drives that are using ext4 that for whatever reason, I just can't seem to write too. I've changed the permissions on the drives using chmod so the permissions are "drwxrwxrwx". I can even right click within the drive and click "Create New Folder" but then it tells me, "Error while copying to "sdc1". The destination is read-only." I thought the destination permissions were setup so anyone can read/write to the disk? I haven't been using linux that long and have only recently started to feel comfortable to move over all of my stuff to Fedora.
View 6 Replies
View Related
