Fedora Hardware :: USB External Hard Drive Not Detected
Aug 17, 2010
I just had a fresh install of Fedora 13 x86_64 on my notebook after using fedora 13 x32 for a while.I am using KDE Desktop.Everything seemed to be working fine out of the box except for minor problems with sound and plugins.The biggest issue is that Fedora does not recognize when I plug an external USB HDD (WD 320 GB for this matter).The USB light on the HDD does not go on, and nothing is auto mounted.It seems that USB does not work at all - I have tried to plug another USB device and it didn't seem to have power.
My Toshiba 500Gb USB hard drive is not being detected anymore when i insert it in 9.10. It only started doing this from last week, it was fine before (and it works fine in Windows XP). The connections are fine and all, because when i type "lsusb", i see it as follows:
Bus 001 Device 003: ID 19d2:0063 ONDA Communication S.p.A. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 004: ID 0930:0b09 Toshiba Corp.
I have 1tb Seagate Freeagent NTFS External HD. I have Windows Vista Ultimate SP1 with dual boot as Ubuntu. I'm primarily a windows user, since i'm not that well acquainted with linux. External Hard Drive does not detect- when i connect it..it just gives a whirring sound and the "My Computer" window hangs. Figured out the cause- and temporary solution- The drive should do principle mount automatically. It won't if the file system is not "clean". That is possible if the drive was connected while you hibernated Windows, or if you did not properly disconnect the drive.
I booted with ubuntu and did the following- sudo fdisk -l and got the following: Disk /dev/sdb: 1000.2 GB, 1000204884992 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x396e2b4d
Device Boot Start End Blocks Id System /dev/sdb1 1 121601 976760001 7 HPFS/NTFS
Then I typed: sudo mkdir /media/FreeAgent sudo chmod 777 /media/FreeAgent And wrapped it up with editing fstab with the following code: #FreeAgent USB Drive /dev/sdf1 /media/FreeAgent ntfs defaults 0 0
Now the browser window for the freeagent hard drive pops up and I can access everything. I try to shutdown the computer but it won't as long as the hard disk is connected. So I have to pull the usb out. And the problem remains the same. I want the hard disk to be detected normally on my windows/linux (like normal usbs work-plug it in and it works). Also have no clue how to work a temporary solution like this with windows yet. I have boot with ubuntu everytime and repeat these steps when I want to access it.
I have a problem with my external hard drive. I've always used to connect it to my Ubuntu Server with the following command: sudo mount -t ntfs-3g /dev/sdc1 ..and it's worked fine, but after a reboot I did a couple of times ago, the hard drive no longer appears.sudo fdisk -l doesn't show the hard drive anymore. Connecting it to a Windows computer works, I even tried the "safely remove harddrive" function, but to no avail.
I have Seagate Freeagent Go 500GB external hard drive that I use for backup. I wanted to resize the partition so I used GParted to shrink the 500GB NTFS partition to 400GB. The other 100 I wanted to encrypt and use for some other more important files. For some reason, the shrink failed and I disconnected the hard drive and reconnected it. I didn't see the icon appear on the desktop. I went into the Disk Utility to discover that GParted's shrink error deleted all of the partitions on my hard drive. So I created a new 400GB NTFS partition and put back all of my files. The other 100 is unallocated currently.
It will normally mount automatically and show up on the desktop but the hard drive won't mount without me going into the Disk Utility and mounting it through there. I can't even mount it from the Terminal with root privileges. It gives me this:
Quote:
sudo mount /media/My Data mount: can't find /media/My Data in /etc/fstab or /etc/mtab
Now, I can unmount with root privileges and I can unmount it from the Disk Utility. I can browse and edit the files within. But I can't unmount it from within Nautilus or on the desktop (the Safely Remove Drive option is not there).
The new 400GB partition also isn't detected by GParted. It just shows the whole drive as unallocated.
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
I have windows on my box, I have fedora 14 on my external that goes through my usb. Grub is installed on my usb. Since the only thing stored on my external was fedora i really didn't have to do much to it. just go into bios and boot from usb. Now that im using fedora more, Id like to add Vista to my choices. I guess the numbers change once your using an external drive. Ive read some of the problems like mine but they didn't quite do it. Im going to inclose 2 screen shots of my drives/partitions and my grub.conf.
# grub.conf generated by anaconda # Note that you do not have to rerun grub after making changes to this file # NOTICE: You have a /boot partition. This means that
i have a 1 TB external hard drive and i have created 4 partitions as 3 of 300 GB , and one of 100 GB and i have format it as FAT but it is not showing 4th partitionand when i use fdisk -l it shows it as linux partitions and they are mounting in linux onlywhen i use the drive in windows , disk is not able to mount
I would like to backup up my linux files to an external hard drive from a laptop. What would be the most simple and easiest way to do this? How would I format an external hard drive in linux.
I have an external hard drive that is connect to my laptop through USB port. But it won't show in my folder. I've looked every where but could located.
Running fedora14 on a dell latitude-d600 laptop and I'm trying to access a 500gb sata external hard drive that is connected via usb. The laptop can see the drive as '500 GB Hard Disk: 524 MB Filesystem' and it's clearly mounted under the '/media' directory. However, when I attempt to read the files on it, I am only able to see the 524mb section of the drive. The external hard drive is an ext3 file system (running fedora13) and I believe it's encrypted.
I've got this hard drive that I know that is formatted to either ext3 or ext4, but I want to find out which format it is. I'm unfamiliar with many commands, I tried 'fdisk -l' but it didn't yield any useful information to me. Is there a command wherein I can easily find out the format of disks?
I have got a hold of a extra hdd along with a hdd enclosure. I have tried looking for information on how to install linux on to one but haven't been completely successful on my search. So I turn to all of you. I was also wondering if its possible to have it were I can use it on multiple computers so I can use it for computer repair.
I have been a Linux user for about 6 years now, and recently switched to Fedora just to try something new. I used Ubuntu for the majority of the time so I am somewhat familiar with the command line, but seem to be having trouble with my external HDD. Ubuntu automounted it no problem. Fedora doesn't seem to like to do that. I tried searching and I did what almost every thread insisted upon; which is mount /dev/sdb(that is what dmesg said) but it says already mounted or /mnt/busy. So this is the extent of my Terminal experience with mounting an external drive, and I am completely dumbfounded as to why it simply won't mount. I am liking Fedora so far and so long as there is a remedy for this I don't plan on going back.
I installed Fedora 15 5 days ago after using debian-based distros for a few years, and until now I've had the habit of sharing many files (mostly multimedia) on my home network, except since I'm the only one using Linux, I have to do it using Samba.In Ubuntu, Xubuntu and Linux Mint, this worked like a charm.
Two things have changed this week: I switched to Fedora 15 like I said before, and I bought a new USB external HDD. I previously used a 500 GB Western Digital, and changed for a 1.5 TB SAMSUNG which is linked to my station via USB. The drive works well and I cp'd the 450 gigs of the ancient drive within the new one without a problem.
Ever since I managed to set up fedora and GNOME 3 as I would like it, I've been trying to setup the network sharing via Samba, and that's a genuine 4-day long headache now.Thing is, yesterday, it worked. After setting everything right, creating an automount of the external HDD in a maybe-too-much permissive folder, allowing Samba through the firewall, getting to know that buddy called SELinux I had never met before and which I struggled to tame ; after setting everything up, it worked seamlessly, I streamed music from the Windows PCs of my network and began watching a film.
Except I had a problem which had nothing to do with Linux: letting the USB drive plugged in on startup prevented the BIOS phase from going well, and my station was stuck on my motherboard splashscreen. To fix this, I had to disable the USB Legacy in my BIOS. Did the trick. Yesterday night, I rebooted like that, and everything was fine.This morning, Fedora wouldn't boot. Since the new BIOS parameters didn't switch the drive on on startup, fstab was trying to mount a drive which wasn't there, and thus crashed, switching to emergency mode.Had to remove the ftsab line concerning the USB drive for Fedora to boot again.
Alrite, that's fixed, I thought ; I just changed the fstab options adding noauto,user, etc. and I thought it would be ok, but it ain't.It's now been 3 hours without me finding any clue as to how to get this working.
IMO, the problem comes from the fact that Samba is missing the right to access the drive. Samba seems to be OK: from the Windows station I can see my Linux station on the network map, I can access it entering the Smbuser I created for this, and the "ext-hdd" dir is present (that's the alias I used in the Samba config files), but when I try to access it, Windows says it can't access it.
I'll try to add as many pieces of information as possible that might be useful:
SELinux config:
Code: [norfen@norfens-station ~]$ getsebool -a | grep samba samba_create_home_dirs --> on samba_domain_controller --> on samba_enable_home_dirs --> off code....
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
Background is this: Laptop has an internal h/d (obviously) so I removed it from laptop. Then set Bios to boot from external h/d. Installed Fedora 11 on ext. h/d no swap partition as drive already has 4 partitions. Fedora ran lovely!! I then replaced internal hard drive but left bios to boot from external hard drive. Boot screen for fedora came up, hit enter and fedora started loading. The little balloon started filling up, got to a quarter full and then screen went black. Had to reboot to get going again,same thing happened. Can anybody tell me what may be causing it,i.e. black screen. Fedora boots up and runs lovely with internal h/d removed. Any help very gratefully received. M/c has intel dual core processor, 3 gig of ram.
i am using fedora 11 and i want to share my western digital external hard drive over my wireless network like i previousely did with my windows os. it is connected via usb to my computer. how do i do this ?
Hardware: Toshiba Satellite L755Software: openSuse 11.4 with kernel 3.1.0-rc1-98-g72fa599-1-vanillaPeripherals: Logilink USB 3.0 to SATA HDD Adapter with Western Digital WD2500JSI installed the Vanilla kernel in the hope that USB 3.0 will work. But though some things really have been fixed (for instance, the notebook can resume from sleep mode), USB 3.0 still doesn't work.
Code: lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code: sundar@sundar-sundar:~$ fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes
I purchased a Seagate Goflex 500GB external hard drive yesterday and tried to connect it with my Fedora machine. Unfortunately my machine could not mount the drive. I have never had such problems earlier with other USB drives.PLease, how to use this ext disk on the fedora machine.
i installed Fedora 12 on an external hard drive. Everything went fine with the installation and it was working perfectly until i tried to install my video card drivers. I have done this many times before and it has worked. I have an ATI card. Anyway after installing the driver i rebooted and now when it starts it show the loading bar on the bottom but then nothing happens its just a black screen!. The worst part is that when i go into windows and my external is plugged in windows wont read it and i have very valuable data on it. I go into disk management and it shows up but windows says that its empty. which is obviously not true because Fedora starts to boot. I really just want Fedora off my external and for windows to read my external with all the files still on it. Is there a way to get by that blank screen?
Been using Ubuntu to extend the life of my hard drive. I'm not very familiar with the inner workings of Linux, but I know computers well.
My System: - Ubuntu 10.04, gnome environment. Dual boot XP.
Problem: - my external drive, WD essentials 2.2 TB, stopped working recently, about 6 months after installation of dual boot.
Facts: - still detected, though SMART does not detect it. - XP still detects it - cant access files though. * - Ubuntu now detects a floppy drive, which I do not have. - power still working. - have tried a few different USB cables. - happened around the time of several software updates. Maybe paranoia. - had trouble with music playback.
Hypothesis: - Drive is dying, cuz XP wont allow me in. * - Something happened and it rolled back the drivers on the External HD. - Somehow losing Voltage, though I dont know how. **
Have attempted: - Disabling Floppy from bios. - In Windows: disabling XP service pack 3, disabling Firewire 1394. - Different USB cables. ** - Disconnecting all USB devices, except External HD. **
When I boot, the device I'm looking for shows up but it isn't detected inthe file system. I have two drives, a 500g and a 1Tb in a dual usb case.When I do sudo fdisk -l, I get:
Disk /dev/sda: 200.0 GB, 200049647616 bytes 255 heads, 63 sectors/track, 24321 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
