Ubuntu :: Constant Error On DVD-DL Burn?

Sep 3, 2010

I'm on 10.04. 64bit (but dont think this is 64bit related)

I have been getting this very annoying error while trying to burn DVD-DL media from an iso using growisofs. Here is the command I used (to burn a backup copy of an xbox360 game)

Code:
growisofs -use-the-force-luke=dao -use-the-force-luke=break:1913760 -dvd-compat -speed=2.4 -Z /dev/scd0=nameofmyiso.iso
Now, every single time, usually around 50%, I get this error:

:-[ WRITE@LBA=aacf0h failed with SK=3h/WRITE ERROR]: Input/output error
write failed: Input/output error

I've been searching around and found threads with people complaining about this error since 2005, but not a single one of them presented any solution (some hint to a kernel issue, which I'd have no idea how to fix. I'm a noob at linux).

I also tried burning it using imgburn under wine, same error, also at 50%.

This is very frustrating, Ive burned around 6 coasters so far and DVD-DL are expensive to keep on this trial and error.

p.s It's not faulty media before anyone asks. I tried it on Mac and it worked fine. Also, this drive worked well before, before I migrated this machine.

View 1 Replies


ADVERTISEMENT

Ubuntu :: Constant Error Message Regarding Kernel

Aug 11, 2011

I have installed Ubuntu 10.04 LTS on a flash drive and everytime I try to do an update I get the following error message:

Code:
Setting up linux-image-2.6.32-33-generic (2.6.32-33.72) ...
Running depmod.
update-initramfs: Generating /boot/initrd.img-2.6.32-33-generic
lzma: Encoder error: -2147467259
Failed to create initrd image.

[Code]...

also, I would like to know if I want to make clones of the flash drive, would a copy and paste suffice or do i need to use some cloning software? I have followed the instructions on ubuntu wiki to make my casper-rw larger than 4GB by making it an ext4 partition.

View 3 Replies View Related

Ubuntu :: Computer No Longer Boots Constant Error

Dec 14, 2010

I have tried to keep away from posting this seeing how many have had the same problem but this is getting to the point of me just selling my computer out of shear frustration. Ive got Windows XP and Ubuntu 10.04lts. For a while they all ran fine together till my Windows drive gave out and ever since I tried to remove the drive GRUB recovery has been popping up. I even tried to put the drive back in and the computer still wont boot anything. Ive got 4 different live boots and neither one works, Ive tried to boot with my internal dvd drive and a usb one, there is always a Grub error. When I put in the ls command and find my only non"unknown filesystem" it still says "bad filename". I guess where im getting at is grub wont even let me reformat my computer or boot from anything without saying "no such device: 32d98-e0b3-451b-809b-ae6562ccb701"

View 3 Replies View Related

Debian :: SSH2 Constant Collide Error

Jul 19, 2015

Install SSH2, but he constantly collide error. It is that [pecl install -f ssh2] but unfortunately writes error and can not be installed. Now it is up to the SSH2 provides but unfortunately cancel running.

Here is the php info : [URL] .....

System : Debian 8.1 Jessie

Debian 7.8 : The installation fails without error but that is not enough fresh modules.

View 0 Replies View Related

Debian Configuration :: Constant Error When Running Apt-Get

Mar 9, 2010

Nothing serious (I think), but everytime I run apt-get to remove programs and doing upgrades... I get a strange message.

This is the output of apt-get upgrade:
Inspiron1525:/home/hernan# apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages will be REMOVED:
iamerican ibritish
0 upgraded, 0 newly installed, 2 to remove and 0 not upgraded.
17 not fully installed or removed.
After this operation, 4030kB disk space will be freed .....

And this is the output I get when removing a program (I removed amor so I can show the output):
Inspiron1525:/home/hernan# apt-get remove amor
Reading package lists... Done
Building dependency tree
Reading state information... Done

The following packages will be REMOVED:
amor iamerican ibritish
0 upgraded, 0 newly installed, 3 to remove and 0 not upgraded.
17 not fully installed or removed.
After this operation, 6185kB disk space will be freed.
Do you want to continue [Y/n]? y
(Reading database ... 89741 files and directories currently installed.)
Removing iamerican ...
/var/lib/dpkg/info/iamerican.postrm: line 6: /usr/sbin/remove-default-ispell: No such file or directory
dpkg: error processing iamerican (--remove):
subprocess post-removal script returned error exit status 1 .....
E: Sub-process /usr/bin/dpkg returned an error code (1)

When I run update, I don't get the error though.

View 4 Replies View Related

Programming :: POSIX__Philosophers At Dinner: Error: Initializer Element Is Not Constant

Jun 23, 2010

I changed my post because I found that solution, and didn't want to bother for that. But, since I didnt find a way to delete the post, I thought of updating it: I am beginning to write the code for the philosophers problem. As you know, they can eat, think or wait for forks. When they have 2 forks, one by each side, they eat. Then they set the 2 forks as available, and think.

Each philosopher is a thread. My problem is that it gives segmentation fault, somehow, when I try to initialize. The thing I really don't understand, is why it sometimes gives segmentation fault on initialization #0!!! (But generally on initialization #1) I have set 5 initializations in total, defined by N, that is also the number of threads I'm working on.

PHP Code: #include<stdio.h>
#include<stdlib.h>
#include<unistd.h>
#include<pthread.h>
#include<errno.h>
#include <time.h>
#define N 5
[Code]....

View 1 Replies View Related

Ubuntu :: Can't Burn CD Without Error?

Jul 21, 2010

Running Ubuntu 10.04 now, and still I can't burn a disc without errors. I had a different computer the last time I was able to burn a CD in Ubuntu. ECS K5S5A Motherboard died, and I acquired another computer, running another brand, similar AMD Athlon motherboard. 1.0 GHz processor instead of the 1.05 GHz Athlon processor , but the is laid out very similar.

Installed 9.04 from a disc burnt on the old computer. Trouble with errors in Brasero, and I upgraded through the Update Manager to 9.10 then to 10.04. I replaced the burner with the one out of my dead computer, that burnt successfully before it died, and I still have errors.

My Log:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1741)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_set_output_size_for_current_track
BraseroBurnURI stopping

[Code]...

View 3 Replies View Related

Ubuntu :: Can't Burn ISO Image, Error After 3%?

Jul 21, 2011

I created a ISO under DeVeeDee and went to burn it with Brasero (also tried with K3B) and they both came up with error messages.k3b comes up with "Internal error. Short read! Please report" and stops at around 3% and 3-4 minutes into burning. The same error happens under Brasero, it'll stop after a few minutes.

View 1 Replies View Related

Ubuntu :: Can't Burn CDs - An Unknown Error Occurred

Apr 10, 2010

I can play CDs and DVDs but when I try to burn a music CD I get:

error while burning

an unknown error occurred

when the CD is finalising. As data has been written to the CD, but not finalised, each time I try I use another CD.

I've used Brasero and whatever the default burner in 9.10 is with the same result. If I boot in Win7 I can burn CDs.

View 9 Replies View Related

Ubuntu Multimedia :: Burn Mpg To Dvd - Disc Error

Apr 25, 2011

I've been trying all week to get mpg to dvd, my dad has a video that is supposed to be aired on television soon and the deadline to have it in is tomorrow. right now i have it as an mpg file and i cannot get it to burn to dvd. I've tried using devede and Gnomebaker, but everytime i put it in the dvd player it says disc error.

View 9 Replies View Related

Fedora :: Error Trying To Burn DVD

Jun 21, 2009

i have a file that i'm trying to burn and for some reason when the burn process completes i get the following error message: Error while burning.You do not have the required permissions to use this drive.i'm not sure why this is happening- is there something i have to set/enable to be able to use my DVD drive? i am using brasero to burn my dvd, and it appears that the failure occurs during the verification process.

View 3 Replies View Related

Ubuntu Multimedia :: Brasero � Error Message When Trying To Burn Audio CD?

Aug 20, 2010

This happens every time I try to burn an audio CD burning data CD seems to work fine.I open Brasero, click Audio project, drag a couple of FLAC files into it and try to burn, or in this particular case, create an image.A dialogue pops up where I am supposed to tell it where to put the image. I click Desktop but I don't change the file name (something like brasero.cue or whatever).Then it starts doing things but after a short while I get an error message and I am asked to save the log file, which I did and here it is:

Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1741)
BraseroNormalize called brasero_job_get_action

[code]....

View 9 Replies View Related

Ubuntu :: Session Error : Unknown (brasero_burn_record Brasero-burn.c:2769)

Jan 4, 2010

well i tried burning puppy linux through brasero k3b and gnomebaker and this is what i got with brasero as a unknown error

Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1799)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action

[code]....

View 3 Replies View Related

Ubuntu Multimedia :: Session Error : Unknown (brasero_burn_record Brasero-burn.c:2842)

Jul 21, 2010

I recently switched distributions, I let a guy talk me into switching from Ubuntu 8.04 to Mint 9. Since the switch, I have had a lot of issues that I have mainly worked out myself. I have posted all of it on the Mint forum, but there hasn't been much help available there. I have been told that Mint 9 is based on the newest release of Ubuntu (Lucid Lynx), so I thought I would post over here to see if anyone could help me. The only thing that's still giving me fits are the 3 software programs above. Using k9copy and trying to burn directly to disc, I am getting the error that I took the screenshot of. I then burned it as an iso image and saved it, then tried to use k3b and brasero to burn it that way and got errors with both of those programs.

From k3b:

Devices:

LITE-ON DVDRW LH-20A1S 9L08 (/dev/sr1, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW,

[code]....

View 7 Replies View Related

Fedora :: F12 K3b Error - Can't Burn Any Kind Of Disc Using Internal Sata Burner (sr0)

Mar 3, 2010

It seems I can't burn any kind of disc (cd/dvd, audio/video/data) usgin my internal sata burner (sr0). I treied googling around and reinstalling everything from dvd+rw-tools up but the error is still there. the burner works fine with windows on the very same pc (dual boot). I tried different media and different speeds. when using an usb burner everything's fine...

[Code]....

View 5 Replies View Related

Ubuntu :: Burn A Mp3 Cd But Brasero Can't Burn Mp3 Cd

Dec 25, 2010

I want to burn a mp3 cd but brasero can't burn mp3 cd. How can I do this. If any further software need burn mp3 cd

View 3 Replies View Related

Fedora Installation :: Livecd Cant Burn Correctly / Buffer I/O Error On Device Sr0 Logical Block 352328?

Oct 3, 2009

i've just burned a livecd (fedora 11), but it doesn't work correctly.it says after i hit boot:

BUFFER I/O error on device sr0 logical block 352328

and then something else, which is similar so i didn't write it down.i read on bugzilla, that is should try to append the boot command with pci=nomsi, but it doesn't work for me

View 3 Replies View Related

Fedora :: F11 - Burn A Cd Or Dvd At The End Get "Error While Burning. You Do Not Have The Required Permissions To Use This Drive"

Jun 29, 2009

Every time i tried to burn a cd or dvd at the end i get the message "Error while burning. You do not have the required permissions to use this drive"

[Code]...

View 2 Replies View Related

Ubuntu :: Constant Load Of 1-2

Mar 3, 2010

My laptop running ubuntu 9.10 load NEVER drops below 1, and generally hovers between 1 and 2. This does not happen on any other of my ubuntu machines.

Any ideas of what to check? I've turned off indexing and watched system monitor. I always sit at 0% cpu usage, no active apps, but always a high load.

Attached is a screenshot showing top (with the load).

In my system monitors up top you can see the middle one in red, which is load. Constantly 1-2. The left one is cpu (almost no usage at all) right right one is disk IO.

View 4 Replies View Related

Ubuntu :: Constant HD Activity Bogging Down?

Nov 5, 2010

I'm using Lucid on a laptop, (details in sig). Often after I've been running Ubuntu for a while, like a few hours, my HD activity light will come on and not stop, causing my machine to become laggy. (A link might open 3-5 seconds I click on it, typing appears a second after I press the key, a window or dropdown menu might take 5-10 seconds to be drawn.) I currently have Firefox with one tab and a Nautilus window open. Conky says the CPU is running at 10-20%, RAM is almost all used, (I assume Firefox's cache is filling up, since I've been surfing for a while), and swap is around 25% full. I just turned Compiz & Emerald off, but the HD is still spinning away. At this point, I usually log out and in again, or reboot. I though slowing performance with usage, resource-hogging background processes and constant rebooting were Windoze traits! What gives?Apparently, this is caused by Update Manager. Unbeknownst to me, Update Manager was waiting for me to give it the go-ahead, but while it's open, instead of patiently waiting, it renders my computer unusably slow, even though it's not supposed to be doing anything.

View 2 Replies View Related

Ubuntu :: Constant Screen Crashes In 11.04?

May 1, 2011

here's the videos video of the error in action

i just upgraded from 10.10 to 11.04 and am using the "classic" gnome 2 interface. i have an ati card, currently powered by the standard fglrx drivers. something must be wrong with compositing, because when i mouse over avant window navigator, indicators, menus, drag files, etc, there is a good (but still random) chance of it breaking my display.

just for the record, i have tried this with the newest catalyst drivers from the official website, the fglrx drivers from the repository and without any fglrx drivers at all. i am running a patched version of emerald that works with the included compiz, but i still get the same crashes with metacity's window decorator and without avant window navigator. indicator menus will just crash the screen from gnome-panel.

i had also gotten this same problem in a previous natty install using unity.

edit: hmm, disabling compiz seems to keep the crashes at bay, so i think this is a (major) compiz bug. does anyone know which logs i should include in my bug report?

View 9 Replies View Related

General :: Ubuntu 9.10 Constant Restarts

May 17, 2010

My dads' hard drive went up a while back. So we got him a new one and installed Ubuntu 9.10 instead of windows. All was going well until About two weeks ago. The system restarts randomly. Not when anyone is doing anything in particular. Sometimes when we are using firefox, sometimes just sitting on the desktop, and never after any certain amount of time.Some times its after five minutes, some times after several hours. It's not a full out crash, the window for shutdown/switch user/restart comes up out of nowhere. When we close the window, it shows back up pretty quickly, but then the computer will just crash. While restarting, half of the time the computer won't make it past the bios screen before restarting again,and will continue the bios restarting cycle until the computer is unplugged. By the way, the system is a dell dimension E310 from 2005 with all of the original hardware minus hard drive inside, so if it is a hardware issue that wouldn't surprise me. Also, just one time after the restart I received the message "fsck from util-linux-ng 2.16" , if that helps at all.

View 6 Replies View Related

Ubuntu / Apple :: Constant Crashes / Stop It To Do So?

Jun 21, 2010

I'm on a MacBook Pro 2,2 with Ubuntu 10.04. Multiple times Ubuntu freezes up and then crashes. I'm not entirely sure what is causing these crashes, but they happen mostly when I'm running anything graphics related, especially games. Although the crashes haven't been isolated to those instances. Any ideas on what could be causing this?

View 1 Replies View Related

Ubuntu :: Constant Screen Flashing On Boot Up?

Jul 5, 2010

I recently wiped and partitioned my hard drive on my Sony Vaio Z series laptop. I set up the NTFS partition for windows, the Ext-4 partition for Ubuntu 10.04 Netbook Remix, and a large NTFS partition for my all my media. I installed the netbook remix off of a flash drive, and I couldn't have asked for a smoother install. Everything went fine, and I proceeding to install google chrome and all the other little goodies. After that, I configured all my settings and ran the update manager to get everything just fine. After a reboot, I became frustrated and prevented maximus from running on start up because I did not want every windows I opened to be maximized. After a reboot, the screen would flash very brightly more than once per second. I could see the top bar with the processes and such as well as the correct background, but I cannot do anything because the screen will not stop flashing. I figured out I could stop it from flashing by pressing ctrl+alt+F7, but the screen just freezes where it is at and is still unusable. Desperate to start enjoying my Ubuntu Netbook Remix, I wiped the Ubuntu partition and reinstalled and did everything EXACTLY the same except instead of preventing maximus from opening, I used gconf-editor to change the setting to not maximize everything by default. Reboot, exact same problem.

I've searched everywhere for a solution, but I only find people with vague similarities or explanations. Could it possibly be a graphics problem? My laptop has 2 graphics cards in it - an Intel integrated one and an nVidia one. The nVidia one has a hardware issue so I just use the Intel one for now. It is also worth noting that I have installed Ubuntu 10.04 (desktop) on my machine before and I never had any such problem.

Also, I tried booting up in the "safe mode" equivalent, but I eventually encounter a black screen and I am forced to hold down the power button to shut it down.

(also, if it's worth anything, I know how to use windows well if there's any way I can change something in Ubuntu from my windows installation)

View 2 Replies View Related

Ubuntu :: Eliminate Constant Password Logins?

Feb 19, 2011

Very often I have to leave my computer for a few minutes while in the process of downloading files, or just to get a cup of coffee, and when I come back, I have to re-enter my password to continue. This level of security is unnecessary since I am the only one here, and there is no danger of anyone ever messing with my PC. How can I eliminate these annoying login requests? One reason I am trying to get away form Windows is to have the computer do what I want, and not what other people think I want. I have been experimenting with various Linux OSs and several versions of Ubuntu, and this is an annoyance in every one I try.

View 6 Replies View Related

OpenSUSE :: 11.3 Kde Constant Lock Ups?

Jul 18, 2010

Doesn't matter what application I am using this thing locks up tighter than a prison cell. I can't seem to do anything but reboot at that point. 11.2 never had this problem on this computer. I'm running a nvidia gt 220 card without the nvidia driver. Could this be the problem? I really don't know what to do about it. I was running the default kernel, but switched to the pae kernel as I have 4 gig of memory. Still locks up.

Probably should have stuck with 11.2 for a while longer, but at this point I would like to get 11.3 working. If not I will just go back to 11.2.

View 9 Replies View Related

Ubuntu :: Download - UNR 9.10 (constant Freeze Crashing) In Desktop 9.10?

Feb 11, 2010

unfortunately it looks like UNR 9.10 is as unusable as desktop 9.10 was (constant freeze crashing). Is there anywhere I can download 9.04 UNR? Ubuntu.com only seems to let you download the latest version.

View 3 Replies View Related

Ubuntu :: Laptop High Heat And Constant Running?

May 2, 2010

Just put a fresh clean copy of Lucid on the laptop. I have noticed this for a while on the otherr versions and distros also, and finally started looking at. My laptop runs, contantly.The fan seems to be always running. I don't have more the a couple of applications at time, I don't use it for work, so nothing extensive. Web browsing, music, email, photos. End user stuff. So I added a heat application in the panel just to see what was happening. I can get the temp down to around 150F-ish if I am not even looking at the laptop. But, open anything and start workingand I am sitting arround 183F-185F. Is this normal? I am just getting toired of having such a hot laptop on my lap, I even have a pad under it so the air can circulate witht the fan, but, a constant running fan is what I have and the heat can be felt through the pad if I am sitting for a couple of hours.

View 9 Replies View Related

Ubuntu Installation :: 10.04 Boot - Constant Screen Flickering

May 18, 2010

When attempting to boot into Ubuntu 10.04, the screen constantly flickers. It'll stay off for about 2-3 seconds, then come back on for <1 second. This constantly occurs. When reaching the main screen (I think), I attempt to move into a TTY terminal, but the flicker continues. I have attempted to reset the X Server, stop the X server, etc., issue remains. The monitor does not turn off during this flickering. I am able to type, obviously.

Here are my system specs:
AMD Athlon 64 X2 Dual (6000+)
2.00 GB RAM
ATI Radeon HD2600 XT (x2, Crossfire)
HP w2207h 22" Monitor, connected via HDMI

I also have VGA inputs on the back of the monitor and can attempt to switch the input, but that requires me to dig through a box looking for a cable, so I figured I'd post this issue first.

View 1 Replies View Related

Ubuntu Servers :: 10.04 LTS Constant Security Updates And Restarts

Nov 18, 2010

is it normal having several security updates week after week in a 10.04 ubuntu lts server distro? Some of them even need a system restart, which I consider truly bad for a web server...

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved