I have been unable to burn CD's / DVD's while logged into FC12 with a full GDM session or with just the Gnome Greeter running. If I drop to single user mode and use wodim I can burn w/o issue.
GDM 2.28.2
KERNEL 2.6.32.9-70.fc12.x86_64
I have an issue with kernel-2.6.31.9-174.fc12.x86_64. I ran the updates on Christmas Eve and it updated from kernel-2.6.31.6-166.fc12.x86_64 to kernel-2.6.31.9-174.fc12.x86_64. When I rebooted, I no longer received the Fedora Bubble boot screen. It comes up with the Fedora boot bar (across the bottom). Also, I receive failures during boot with the following:
[Code]...
I have configured the Adobe repos and when I try to install Adobe Reader, yum gives me the following error:
Code:
Transaction Check Error: package nss-softokn-freebl-3.12.4-19.fc12.x86_64 (which is newer than nss-softokn-freebl-3.12.4-17.fc13.i686) is already installed I tried --skipbroken as a longshot to no avail. Obviously if I try to remove nss-softokn-freebl it tries to remove all of Fedora , looked in Koji but there is nothing in there either.
I am trying to set up k3b. It complains about a missing mp3 decoder. Following this solution, I set up yum to use the livna repository and then found I actually needed the rpmfusion repo, so set that up as well. Now when I run "yum install k3b-extras-nonfree", I end up with a transaction error: Transaction Check Error: file /usr/lib64/libfaad.so.2.0.0 from install of faad2-libs-1:2.7-1.fc11.x86_64 conflicts with file from package libfaad2-1:2.7-16.fc12.x86_64
Any idea why the repo is trying to install faad2-libs x86_64 1:2.7-1.fc11 rpmfusion-free when all the other objects are correctly shown as fc12 and how do I get around this without breaking something which is already installed?
When attempting to install FC12 x86_64 on a Dell Optiplex 760, my USB devices stop working after initial boot. I see anaconda, but am unable to change anything since my keyboard, mouse and any other USB devices are not powering up after kernel boot.
View 13 Replies View RelatedToday's update failed with this line tagged to every package:
Error: Unresolvable requirement /sbin/ldconfig for pixman-0.16.2-1.fc12.x86_64 (installed)
Error: Unresolvable requirement /sbin/ldconfig for libXrandr-1.3.0-3.fc12.x86_64 (installed)
Error: Unresolvable requirement /sbin/ldconfig for libedit-2.11-4.20080712cvs.fc12.x86_64 (installed)
[code]....
Just got the latest kernel update 2.6.31.6-162 for fedora 12 64bit and it won't boot on my PC. I just get a black screen with some text that doesn't mean anything to me. Computer is a s775 E7200 with nvidia 730i/9300 integrated graphics. I am NOT using hardware graphics drivers at the moment, having decided to stick with Nouveau drivers for a time. What system log tools do I need to identify the problem?
View 2 Replies View RelatedI have a tricky problem which I could soIve with a c program. I wrote one and found I didnt have gcc so I tried to install it. I was told I needed to install packages. I acknowledged and an error was generated gcc-4.4.2-7.fc12.i686 requires libgomp = 4.4.2-7.fc12 I try to install libgomp and go round again.
View 2 Replies View RelatedAttempting to compile an application that is not located in any of the repos yet for 11.3 64 bit. I have downloaded the appropriate src and untarred it. However, when I attempt to run the ./configure command here is the error I receive. checking build system type... Invalid configuration `x86_64-unknown-linux-': machine `x86_64-unknown-linux' not recognized configure: error: /bin/sh ./config.sub x86_64-unknown-linux- failed
I have made sure that I have all kernel-headers packages installed and am unsure as how to proceed. I tried using the command "./configure --build=x86_64" and then receive an error stating that the "SYSTEM IS NOT SUPPORTED" and continued errors stating that gcc is not installed, eve though it is.
I was wondering if there is automatic boot-ability for when you burn a custom over sized cd iso onto a dvd using Brasero? Or does this obtaining this functionality require more effort on my part?
View 1 Replies View RelatedI don't have support for burning MP3's in K3b on Fedora 13. K3b is, for me the one and only best burn in tool and I use it exclusively for backuups to CD's, DVD's, saving music, etc. Various blogs say to go to Livna and install k3b-extras-nonfree but when I tried that, k3b-extras-nonfree was not found.
View 3 Replies View RelatedI want to upgrade from Fedora Core 5 to Fedora 11 without burning a CD. I have a 1.5 Mbps Internet connection. Is this possible?
View 6 Replies View Relatedwhen ever i try to install updates i get shown an error & the updates stop the error i get says "librpmio.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates) librpm.so.0 is needed by package abrt-1.0.3-1.fc12.i686 (updates)"
View 12 Replies View RelatedI was burning a disc with K3b and it was from an ISO; Burn and verify. Everything went successful, but when I put in my 2nd DVD to burn, K3b doesn't recognize it. On top of that when I right click on the icon of a Blank DVD on my desktop, it doesn't have the Eject Volume option there anymore. Does anybody know what could be going on here? why would my Fedora (11) stop burning and ejecting discs all of a sudden?
also, I tried this with multiple DVDs/drives to see if they were bad DVDs/drives and it's all the same result. Also, since I didn't have the eject option on my desktop I had to eject it with K3b from within the program. There's still a problem though.
edit: Some reason K3b is recognising discs again and is burning again. I guess the restart did it and I don't know why it was acting funny.
Just switched from a pata dvd burner to a brand new sata dvd burner. I cannot believe how slow it is! My write speeds in any program I use tops out at .9 and slows dramatically down to .3 alot.
New dvd drive specs:
Quote:
Also:
Quote:
My idea pata drive was quite fast. Is there something about the sata drivers causing this? Check bios, Checked drive, Checked software. Cannot really figure this one out.
I'm trying to burn an ISO file with Brasero. It always fails when finalizing.The ISO checksum is ok. The same ISO file is successfully burned in WinXP with CDBurnerXP on the same hardware. So the problem is neither the ISO file nor the hardware.What is wrong with my setup?
View 14 Replies View RelatedI'M using F14 x86_64 and my problem is suspending. When I closed my laptop lid its going black screen and my hdd led is lighting I think my hdd is working hard and I think my cpu is working hard too so fan is working fast and my notebok is going hot.Any key is working on black screen. I must shut down hard .y computer has i5 and ati 5650. WHen I was using Mint 10, it has going sleep well
View 3 Replies View Relatedi'm getting this error in K3B during burning VCD from previously created mpeg files(VCD pal),
View 2 Replies View RelatedI downloaded Fedora Core 12 x86_64 DVD ISO image.I need to check the integrity before burning in to DVD. I found the page which instructs meow to do that but I didn't understand what it says.please tell me how to check the integrity ? and I'm also curious to know the details present in it so can any one please simplify it and tell me what it says
View 7 Replies View RelatedI saw that AMZ recently updated the rpm for Fedora to be compatible with FC 11, however the install is still broken on FC12 (obviously since it's built for 11).
My main question is has anyone found a decent workaround, that won't completely hose your system? Should I just wait until they build an rpm for FC12?
Not wanting to speculate why, in the repositories, Fedora doesn't *also* provide a on-KVM enabled kernel counterpart to the default KVM enabled kernel that *is* supplied, I must say I'm frustrated that they haven't done this simple thing.
Considering that everyone who upgrades to KVM enabled FC12 from a previous non-KVM release of Fedora (like FC10) ... considering that these people will be guaranteed to no
longer be able to run VirtualBox or VMWare Workstation after upgrading, is a disappointing oversight by / or intent of Fedora (one that manifests in *lost productivity*).
And try though you may to install the kernel source RPM and compile it after running "make xconfig" to disable KVM support, you usually can't! Fedora kernel compile attempts often die very early in the "make" process, indicating something like ...
"Kernel compile error: No rule to make target `missing-syscalls'
or some other silliness. And when you successfully compile a "kernel.org" kernel, and try to boot it, you get all kinds of missing library errors (etc).
Given that it would be simple to provide both a KVM enabled kernel (as they do), and also a non-KVM enabled kernel (which they don't) so the rest of us can seamlessly continue to run VirtualBox and/or VMWare Workstation after an upgrade - and avoid getting entangled with deciding whether use KVM or XEN for guest O/S's... it's a frustrating misstep to not have done this basic thing (i.e. include a non-KVM kernel). It was a rude awakening when we tried to launch VirtualBox only to have it fail after the upgrade.
Anyway, has anyone successfully compiled their own kernel for FC12 and not get errors after boot? If so, which sources did you use; and what kernel version? In the meantime I'll try out other kernels and compile options.
Has anyone managed to install retroshare on fedora? Where can i find a howto?
View 4 Replies View RelatedI was trying to make a copy of a DVD recently. I started with Brasero, and when that didn't work, I installed k3b. Both came back w/similar symptoms. Neither burned the DVD and seemed to hang up. When either program stopped/hung, I checked on the file that was being captured from the original DVD and discovered that both programs produced a max file of 1.5 GB (source was 6+ GB). I checked the size of the partition where the file was being temporarilty stored and there is 18 GB of space.
View 4 Replies View RelatedI have windows 7 installed in my system. I have downloaded fedora 14 iso image to my computer. Is there a way to install fedora from the iso directly without burning dvd, like directly from pen drive?
View 7 Replies View RelatedFedora-15-i386-DVD.iso file, sha256sum is correct. Burning by k3b on a fedora14 system fails again and again at 98.4% of the burning. I downloaded again to another partition and the same happens again. The k3b-debug output:
[Code]...
how to install fedora 14 dvd iso from hard disk without burning a dvd. On internet i found 2 articles which are mostly copy pasted on all sites. Dont know whether the same is valid for now. I have currently windows xp running on my 1st hdd on which i intend to install fedora 14 on a logical partition. i have ubuntu 10.04 running on my second hdd.
View 3 Replies View RelatedAny one knows a software like itunes where I could burn cds in fedora 11.
View 5 Replies View RelatedI recently upgraded my CPU (just before the release of FC12), to a 64-bit compatible Intel Core 2 E7600. Upon the release of FC12 I moved to the 64 bit version (via a clean install).
I noticed that NVIDIA does not work (as many topics on this forum confirm). So I reinstalled and used the FC12 default drivers (I think they are called Nouveau-drivers). This seemed to work, so I ran "yum update", and now all X-windows fail.
KDE complaints: "kstartup4 does not exist or fails" and GNOME also complains (sorry forgot the exact error message)
I'd be happy to send logs, but if these are required, which log you want and where I can find it.
how to get or KDE or GNOME running ? (preferably KDE)
System:
Intel Core 2 Duo E7600 (3.1 GHz)
3 GB Memory (800MHz)
Nvidia Geforce 9600 GT
Mobo: Foxconn P35A01
Trying to start Tomcat6, I get the following in catalina.out
dl failure on line 696Error: failed /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0/jre/lib/i386/client/libjvm.so, because /usr/lib/jvm/java-1.6.0-openjdk-1.6.0.0/jre/lib/i386/client/libjvm.so: cannot enable executable stack as shared object requires: Permission denied
Every time I open empathy, I am seeing that message. The messenger itself doesn't have a problem (as far as I can see), but that message really bothers me.
View 4 Replies View Related
