Debian :: Wicd Not Getting Ip Address?
Sep 13, 2010
I don't know much about networking... I have Debian Lenny and use wicd to connect to my wireless. Yesterday, I changed my ISP and now I cannot connect to the wireless signal, only to the wired. It had happened before that it took some tries to connect to a new network, but, after a few tries, it would connect. And then it would always connect at once. But now, it always gets stucked on the obtainment of the ip address. The same routher gives me a perfect wired connection... My wife has Ubuntu and she got it working right away, so it's not a password or router problem...
View 11 Replies
ADVERTISEMENT
Mar 12, 2010
I have just installed Ubuntu 9.10 (64 Bit) and I'm trying my best to get this Linksys WMP300N wireless adapter to work.I have searched and gone through a number of threads here with some level of progress but I still can not get this to work.Adapter info is BCM43XG [14e4:4329] rev 01I have installed driver bcmwl5.inf using ndiswrapper and ndisgtk.I had absolutely no success trying to use network manager applet so uninstalled it and went with Wicd instead which at least sees my SSID network with a strong signal.My network is encrypted using WPA and I entered the passphrase which seems to pass authentication but it keeps trying to get an IP address until finally it just tosses a failed message.I feel as though I'm really close but it just won't connect.
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code].....
View 9 Replies
View Related
May 5, 2010
I had no luck with network manager and i was surfing the net and it said wicd was better so i installed that and installed 1.6.1 But it was not obtaining an ip address
So i searched again and ppl said that its a problem with 1.6.1 and they said 1.5.9 was better. So i installed wicd 1.5.9 and its still not obtaining an ip address.
The router is unencrypted no security, ppl suggested trying to set a security on it so i tried WEP and when i do that it gets stuck on trying to authenticate the key phrase.code...
View 9 Replies
View Related
Feb 13, 2010
Running kubuntu karmic, kernel 2.6.31-19, on Asus EEE PC 1000.
WICD 1.7.0. hangs on "wired connection: obtaining ip address...". I have downgraded to 1.6.2 and 1.5.9, but this did not solve the issue.
WICD does work under other circumstances, e.g. wireless connection. (But at home I don't have wireless, but just the modem and ethernet.)
Same wired connection ethernet connection works flawlessly on laptop running Windows XP SP2.
View 1 Replies
View Related
Jan 16, 2011
When trying to connect to a wireless AP, neither wicd or wifi-radar are able to obtain an IP. With wicd, a string of various hex/dec characters flow by, with an eventual error. This happens with both WEP and unencrypted APs (- the hex/dec). With wifi-radar it simply fails, but not every time. NetworkManager connects with zero problems every time; though I prefer to not use NetworkManager, so please spare me of such replies. Someone please tell me why there should be only one wireless manager in Ubuntu that works? I have used wicd since before gutsy gibbon, and it always worked fine until the last two versions, Lucid, and Karmic. What is occurring in Ubuntu which over time breaks these excellent applications? I have tried this with four different wireless cards, and all suffer either identical or similar issues. Those chipsets are Broadcom, two RealTeks, and an Intel.
I really wish to emphasize that this post is not a request for a lecture on why I should use only NetworkManager, or why I should go find another distro. With something like Linux, maybe we could push a little harder, and have maybe say, two, wireless managers that actually work? I would honestly like to see more than two, but one is not enough. It baffles me a bit why new versions of Ubuntu mangle some perfectly good applications, but not others. In IT, surely networking, IP4, WEP, basic wifi technology, etc. has not changed so much that every six months whole new programs should need to be written to connect to a wireless access point. Nor should old ones need much tweaking. What's going on? With such boastings of repositories abundant and brimming with free apps, why does anyone want to make NetworkManager the only app that works?
View 9 Replies
View Related
Jul 1, 2010
I installed Wicd in my F13 but I got problems when starting it When I try to start it I got error message:
Could not connect to wicd's D-Bus interface - Check the wicd log for error messages.
View 11 Replies
View Related
Dec 17, 2010
I'v just installed wicd. I can't get it to sart, I get errors saying that wicd couldn't connect to it's dbus interface and the wicd deamon has shut down. Then there's a report from SELinux saying that it's preventing /usr/bin/python "write" access on /etc/dhcp/manager-settings.conf and that access is denied to wicd. I can get wicd to start if I su to root, but I'd like to not have to do that every time I boot. Is there a fix?
View 1 Replies
View Related
Apr 4, 2011
I am trying to use nm-applet with Arch/Openbox/tint2. I can't use wicd-gtk because wicd won't work with ad-hoc networks. I have tested nm-applet in Ubuntu/Openbox/tint2 and it works fine.
The error message is:
Code:
[esteeven@piccolo ~]$ nm-applet
** Message: applet now removed from the notification area
[Code]...
View 1 Replies
View Related
Nov 20, 2015
I tried to install wicd so I can connect to my wireless internet, but it gives me the following output:
/usr/share/wicd/gtk/gui.py:458: Warning: Source ID 54 was not found when attempting to remove it
gobject.source_remove(self.update_cb)
ERROR:dbus.connection:Exception in handler for D-Bus signal:
Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/dbus/connection.py", line 230, in maybe_handle_message
self._handler(*args, **kwargs)
File "/usr/share/wicd/gtk/gui.py", line 253, in handle_connection_results
error(self.window, language[results], block=False)
KeyError: dbus.String(u'bad_pass')
I have checked that the pasword is correct. I had network-manager installed but it has been uninstalled. I am trying to connect to a WPA2PSK router. I might be a firmware problem, since I get a 'message' on the start screen that there are some problems with my firmware, but I can't figure out how to check if it is broken, or how to configure it so it is correct.
I have the qualcomm atheros ar9485 wireless card. As far as I can tell, the driver for that is either ath3k or ath9k, both are installed. The message I get when I start the computer is: usb 1-1.1: firmware: failed to load ar3k/AthrBT_0x01020200.dfu (-2).
View 14 Replies
View Related
Mar 28, 2010
I would like to backup my wicd profiles. I thought it would be sufficent to copy /opt/wicd/data and /opt/wicd/encryption - however, those path do not exist in lenny (which I am running). So which path / folders / files do I need to backup in order to back up the wicd profiles and configuration?
View 1 Replies
View Related
Jun 13, 2010
I recently purchased a laptop from zareason. Seems great, only I've been struggling with getting the wireless to work. I feel like I'm awfully close.
Note: I'm running Lenny.
I downloaded what I thought was the driver for the card. The card info is:
Intel
Model 533AN_MMW
Intel WiFi Link 5300
MAC 00216A72EE22
TA: E50434804
I've successfully install wicd, but it doesn't detect any wireless network. Other computers seem to register the wireless network in my apartment.
View 11 Replies
View Related
May 2, 2011
I recently installed wicd on a notebook with Squeeze. I can connect to the wireless network at my place. However I cannot connect at my friend's place. It timed out with the message: "Connection failed. Cannot obtain ip address."
It is a Thomson router/modem and the key is a 10 digit 64bit Hex. I did not see 64bit Hex option in wicd. So, I tried all 3 WEP options and none of them worked. We can connect to the same network with another computer with Squeeze and NM and also with Windows. This is the first time I am using wicd.
View 2 Replies
View Related
Sep 1, 2010
I decided to try wireless so I bought a TP-Link pci adapter TL-WN851N and installed it. I installed Wcid and firmware-atheros. I set /etc/network/interfaces to read auto lo iface lo inet loopbackAll Wicd does is tell me "No wireless networks found."
View 14 Replies
View Related
Jan 2, 2011
I'm running Debian Squeeze now, just did an upgrade yesterday. I had wl for my wireless and it was all working fine in Lenny. Now that I'm upgraded, wicd can't find anything at all.
[Code]....
View 1 Replies
View Related
Jun 7, 2011
The laptop runs Debian Squeeze XFCE installed from the Live iso (uname -a gives 2.6.32-5-686 as the kernel) and has Wicd 1.7.0 for network management and uses the ipw2100 wifi firmware/drivers. It connects fine using WEP encryption at home and to unencrypted connections found in a couple of public areas. I have had one problem with a WEP encrypted connection in a cafe (got through encryption, but could not get an IP address. There are workarounds which I will try next time I have coffee there When changing my router to use WPA2, I get 'bad password' errors. There is quite a literature on 'bad password errors' and Wicd and kernel 2.6.32, however a lot of the pages are contradictory. The Wicd log showed this...
2011/06/07 17:25:59 :: WPA_CLI RESULT IS ASSOCIATING
2011/06/07 17:26:00 :: wpa_supplicant authentication may have failed.
2011/06/07 17:26:00 :: connect result is Failed
[code]...
I'm fine using WEP at home, but I need to connect out and about as well and meet WPA2 connections in some locations
View 3 Replies
View Related
Aug 13, 2011
My university has a secure wireless network that has the following specs: WPA2, 1st Authentication TTLS, 2nd Authentication PAP, Encryption CCMP or AES, Thawte_Premium_Server_CA certificate and username and password.
I have never gotten this to work with wicd. First of all, wicd does not have a default template for this configuration. This led me in the past to quickly install Network-Manager (on top of XFCE...). While this has worked for me just fine. Recently I found out that this functionality is possible in wicd by creating your own template. So I did and here it is!
name = WPA2 Enterprise TTLS
author = Andres Cimmarusti
version = 1
[code]....
I did everything outlined here: [URL] (that is I saved the file as wpa2-ttls and then added this entry to the active file in /etc/wicd/encryption/templates/).
Sadly wicd's gui does not load my template!, the logs show no errors!...it simply refuses to take it. I cannot see any mistake in the above... do you?Is this some debian bug perhaps?This is the most important issue for me, before accepting to use wicd instead of NM.
View 1 Replies
View Related
Feb 1, 2010
I've been using wicd (1.6.2.1 was the latest version on my desktop computer, maybe it got updated) without any problems for a long time. This morning after switching the thing on to read the morning news with a nice hot cup of coffee I got a number of funny Gui system messages: Wicd needs to access your computer's network cards. Password
View 12 Replies
View Related
Feb 5, 2015
My wifi does not work in the actual debian testing jessie lxde amd64 with wicd version (fresh install). What I've done:
0. Fresh testing jessie install (offline and ignored the question for adding iwlwifi)
1. Adding following sources:
deb http://ftp.de.debian.org/debian/ jessie main contrib non-free
deb-src http://ftp.de.debian.org/debian/ jessie main contrib non-free
deb http://security.debian.org/ jessie/updates main contrib non-free
deb-src http://security.debian.org/ jessie/updates main contrib non-free
2. apt-get update
3. apt-get install firmware-iwlwifi
4. modprobe -r iwlwifi ; modprobe iwlwifi
So searching the web just brings up the wheezy way solution (backport new kernel and iwlwifi).
But in this case, actual jessie testing kernel is already installed by default and so the actual 43 firmware-iwlwifi
Some information:
Code: Select all# dpkg -l |grep -i iwlwifi
ii firmware-iwlwifi 0.43 all Binary firmware for Intel Wireless cards
Code: Select all# dmesg | grep wifi
[ 7.890216] iwlwifi 0000:02:00.0: irq 107 for MSI/MSI-X
[ 8.478878] iwlwifi 0000:02:00.0: firmware: direct-loading firmware iwlwifi-7260-9.ucode
[ 8.479867] iwlwifi 0000:02:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
[ 8.553105] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
[ 8.553193] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[Code] ....
I must add: lxde Debian uses Wicd, so network-manager is not installed !
Wicd seems to be the problem. After changing to network-manager, everthing is ok.
Next install with the official Jessie release, i will look, why wicd not work out of the box.
View 5 Replies
View Related
Sep 20, 2010
I'm trying to configure my new school wireless network (eduroam). Though it *should* work in wicd just fine, it doesn't, it fails with an error saying "failed to authentize". However it works with plain wpa_supplicant. Here's the working wpa_supplicant.conf:
[code].....
I don't see any option in the GUI configuration of wicd that is specified in wpa_supplicant.conf and not in the GUI, so it should generate a proper wpa_supplicant.conf.
Are there some more detailed wicd logs? Is there a way to give wicd the wpa_supplicant.conf part for this single essid and let it use the GUI generated one for the others? Where can I see the wpa_supplicant.conf it has generated for a connection?
View 1 Replies
View Related
Jan 16, 2011
I have installed WICD on Debian . I can now access a new a Network Manager screen, which did not exist before, but it does not display/detect any wireless networks. It is like dead. Before installing WICD I did at least have a wireless WPE encrypted network, which was detected, although it often disconnected for no known reasons. Now even that Network has gone and I can't go on line. Can anybody help here? How can I configure the WICDNetwork Manager to detect an existing network or create a new one? In the latter case, would I have to reconfigure the Router settings to setup/connect to a network in Debian? May be I have to do this, because Tor/Vidalia changes my IP address and so my Network Adapter ( Linksys) can no longer connect to the router.
Also, when trying to follow troubleshooting leads in this connection, the Terminal screen on Debian ( CMD) would often return a PERMISSIONS DENIED message.
View 4 Replies
View Related
Jan 9, 2011
I installed squeeze on my eeepc 1015ped and downloaded the correct firmware-brcm80211 drivers but every time I scan for my network using iwconfig wlan0 scan or wicd, my computer completely freezes. I previously had a solid install running xmonad, and wicd was working like a charm (using the same broadcom driver) but i tinkered too much with it and decided to do a fresh install. I haven't quite run into a problem like this before.
View 2 Replies
View Related
Apr 11, 2011
I installed squeeze on virtualbox on arch linux.After squeeze is booted up, ifconfig says no ip address is given to eth0.I tried ifdown/up eth0, then an ip address was properly given.Does anyone have the same problem or know how to solve this?The network of virtualbox is set to bridged adapter.The host os has only eth0, no br0 and wiredly connected to a wifi router which has the dhcpd.
View 4 Replies
View Related
Nov 29, 2010
I have a Debian VM on Windows that is not getting an IP address assigned by the DHCP. I tried, ifdown eth0 and then ifup eth0 and still no IP address. my interfaces file looks like this:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
[code]....
View 4 Replies
View Related
Jan 29, 2016
I have just installed a new clean version of debian. an hour later I have used the netstat to check connections and I see this :
The (italic) is me, but the first IP with 104.155. I have searched it on google and it says Google INC. Why is deb connected to it ?
somehost@delldebc2:~$ netstat -actun
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:43182 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN
[Code] .....
View 12 Replies
View Related
Feb 10, 2011
how can i drop my email address from bug report in the debian bug report system?
[URL]
View 1 Replies
View Related
Dec 17, 2015
I am setting up a server on a Intel Nuc PC. I have a problem though. I cannot get it to find a IPV4 address.
View 14 Replies
View Related
Jan 12, 2011
I use Debian Squeeze with Banshee 1.6.1 and I'm having a problem with some commands in Banshee via terminal:
$ banshee --play
$ banshee --stop
$ banshee --next
$ banshee --previous
Instead of changing the playback, these commands open a new Banshee window, and then I get 2 banshee processes running. I tried to get some help in Banshee's forum, and they said it's a problem with Dbus, more specifically, the variable DBUS_SESSION_BUS_ADDRESS is not set. If I run the following command, I get an empty line:
login@host:~$ echo $DBUS_SESSION_BUS_ADDRESS
login@host:~$
I searched in google and I found some solutions that worked for other distros, but in Debian they are not working.
View 2 Replies
View Related
May 29, 2014
I have 2 PCs, each running Oracle VirtualBox with about 30VMs installed and standing on the same table
On shopping router I found TP-Link
TL-WR741ND
150Mbps Wireless N Router
[URL] ....
How can it assign 30 IP address to each PC?
View 0 Replies
View Related
Mar 18, 2011
I've squeeze with xfce desktop installed. Howto Display IP address after startup automatically on the xfce desktop?
View 5 Replies
View Related
Sep 14, 2009
Im an academic (university networks and security lecturer) studying/teaching network and operating system security, and inspired by the work of Hovav Shacham set about testing ASLR on linux. Principley I did this by performing a brute force buffer overflow attack on Fedora 10 and Ubuntu 9. I did this by writting a little concurrent server daemon which accidently on purpose didnt do bounds checking.
I then wrote a client to send it a malicious string brute forcing guessed addresses which caused a return-to-libc to the function usleep with a parameter of 16m causing a delay of 16 seconds as laid out in [URL] Once I hit the delay I new I had found the function and could calculate delta_mmap allowing me to create a standard chained ret-to-libc attack. All of that works fine. However .... To complete my understanding I am trying establish where I can find the standard base address for ubuntu 9 (and other distros) for the following, taken from Shacham:-
Quote:
[code]....
/proc/uid/maps gives me some information but not the base address ldd also gives me the randomised starting address for sections in the user address space but neither gives me the base address. Intrestingly ... when a run ldd with aslr on for over (about) 100 times and checked the start point of libc I determined that the last 3 (least significant) hex digits were always 0's and the fist 4 (most significant) where between 0xB7D7 and 0xB7F9. To me this indicated that bits 22-31 were fixed and bits 12-21 were randomized with bits 11-0 fixed. Although even that doesnt define the boundaries observed correctly.
Note: I am replicating the attack to provide signatures to detect it using IDS, and for teaching purposes. I am NOT a hacker and if needed to could reply from my .ac.uk email address as verification.
View 1 Replies
View Related
