Debian Configuration :: Wicd And Wpa_supplicant - "failed To Authentize"
Sep 20, 2010
I'm trying to configure my new school wireless network (eduroam). Though it *should* work in wicd just fine, it doesn't, it fails with an error saying "failed to authentize". However it works with plain wpa_supplicant. Here's the working wpa_supplicant.conf:
[code].....
I don't see any option in the GUI configuration of wicd that is specified in wpa_supplicant.conf and not in the GUI, so it should generate a proper wpa_supplicant.conf.
Are there some more detailed wicd logs? Is there a way to give wicd the wpa_supplicant.conf part for this single essid and let it use the GUI generated one for the others? Where can I see the wpa_supplicant.conf it has generated for a connection?
View 1 Replies
ADVERTISEMENT
May 11, 2010
I am trying to use CentOS 5.4 to set up a secure laptop, largely because of it's SELinux functionality. Unfortunately I couldn't get wireless to work properly using the default NetworkManager so I installed wicd. Initially it buggered up my whole installation but after relabelling files using SEL I can now use my system again. but.. I can't use it with SELinux enabled, as it denies the required accesses for wicd to work. I also get similar SELinux denials for wpa_supplicant. A couple of snippets from /var/log/audit/audit.log -
[Code]....
View 4 Replies
View Related
Jan 25, 2011
I have a "bad password" reply using wicd 1.7.0 with WPA and a preshared key within Ubuntu 10.10, i.e., I am unable to make automatic/repeatable wireless connections using wicd without a workaround.
I believe this may be a problem interaction between wicd and the way wpa_supllicant is passing the (preshared) key to the network authority (the router). In my case, I use a Linksys WRT54GL running DD-WRT v24-sp2 (10/10/09) std - build 13064 OpenSource firmware, configured as an Access Point in Mixed mode (b/g).
I have no problem authenticating WPA Personal TKIP or AES from Windows or Mac OS X clients with a variety of wireless adapters (Linksys, D-Link, Lucent, Airport (Mac)) (No intervention is required to produce the secure connections).
With wicd 1.7.0 and wpasupplicant 0.6.10-2 (wext as wpa_supplicant driver selected in wicd by default) on Linux 2.6.35.-24-generic (Ubuntu "Maverick Meerkat") and a Lucent Orinoco Gold 802.11b wireless adapter I am able to connect to the network initialy (one time) without the "bad password" error.
After the initial successful connection, reconnection is not possible (the "bad password" error) ***unless the wireless security settings on the router are re-applied. Once reapplied/resaved, a subsequent attempt to create a wireless connection from the Linux client will succeed without any changes having been made on the client side.
The psk data being sent to the router (with respect to the Wireless security settings) is being cached in such a way the connection is initially possible but defeats subsequent attempts at connection. Perhaps the passkey is cached/stored on the client side (after it is used to make the first connection) in such a way that it will be sent incorrectly upon subequent attempts at connection? Of course, I'm simply guessing, here ... it is by luck that I found the workaround to establish this wireless connection.
**********
BTW, FYI, I was unable to use the Gnome Network-Manager to establish any wireless connections at all. Thus, Network-Manager was uninstalled (sudo apt-get purge network-manager) during the installation of wicd (Ubuntu Software centre). wpa_supplicant was re-installed (Synaptic) after wicd was installed.
View 7 Replies
View Related
Sep 1, 2010
I decided to try wireless so I bought a TP-Link pci adapter TL-WN851N and installed it. I installed Wcid and firmware-atheros. I set /etc/network/interfaces to read auto lo iface lo inet loopbackAll Wicd does is tell me "No wireless networks found."
View 14 Replies
View Related
Jan 2, 2011
I'm running Debian Squeeze now, just did an upgrade yesterday. I had wl for my wireless and it was all working fine in Lenny. Now that I'm upgraded, wicd can't find anything at all.
[Code]....
View 1 Replies
View Related
Jun 7, 2011
The laptop runs Debian Squeeze XFCE installed from the Live iso (uname -a gives 2.6.32-5-686 as the kernel) and has Wicd 1.7.0 for network management and uses the ipw2100 wifi firmware/drivers. It connects fine using WEP encryption at home and to unencrypted connections found in a couple of public areas. I have had one problem with a WEP encrypted connection in a cafe (got through encryption, but could not get an IP address. There are workarounds which I will try next time I have coffee there When changing my router to use WPA2, I get 'bad password' errors. There is quite a literature on 'bad password errors' and Wicd and kernel 2.6.32, however a lot of the pages are contradictory. The Wicd log showed this...
2011/06/07 17:25:59 :: WPA_CLI RESULT IS ASSOCIATING
2011/06/07 17:26:00 :: wpa_supplicant authentication may have failed.
2011/06/07 17:26:00 :: connect result is Failed
[code]...
I'm fine using WEP at home, but I need to connect out and about as well and meet WPA2 connections in some locations
View 3 Replies
View Related
Aug 13, 2011
My university has a secure wireless network that has the following specs: WPA2, 1st Authentication TTLS, 2nd Authentication PAP, Encryption CCMP or AES, Thawte_Premium_Server_CA certificate and username and password.
I have never gotten this to work with wicd. First of all, wicd does not have a default template for this configuration. This led me in the past to quickly install Network-Manager (on top of XFCE...). While this has worked for me just fine. Recently I found out that this functionality is possible in wicd by creating your own template. So I did and here it is!
name = WPA2 Enterprise TTLS
author = Andres Cimmarusti
version = 1
[code]....
I did everything outlined here: [URL] (that is I saved the file as wpa2-ttls and then added this entry to the active file in /etc/wicd/encryption/templates/).
Sadly wicd's gui does not load my template!, the logs show no errors!...it simply refuses to take it. I cannot see any mistake in the above... do you?Is this some debian bug perhaps?This is the most important issue for me, before accepting to use wicd instead of NM.
View 1 Replies
View Related
Feb 1, 2010
I've been using wicd (1.6.2.1 was the latest version on my desktop computer, maybe it got updated) without any problems for a long time. This morning after switching the thing on to read the morning news with a nice hot cup of coffee I got a number of funny Gui system messages: Wicd needs to access your computer's network cards. Password
View 12 Replies
View Related
Apr 5, 2009
I'm using wpa_supplicant to get wireless working on my HP nc6320.Following that article how-to-install-intel-pro-wireless-3945-on-centos-linux) I was able to use wirelesssince 5.1 but when I've upgraded from 5.2 to 5.3 there some problem came with wpa_gui:[root@localhost]# service wpa_supplicant startStarting wpa_supplicant: /etc/wpa_supplicant/wpa_supplicant.conf -ieth1 -Dwext Device eth1 kernel driver name: ipw3945 [ OK ]
[root@localhost]# ll /var/run/wpa_supplicant/
total 4
srwxrwx--- 1 root wheel 0 Apr 5 20:50 eth1
[code]....
View 1 Replies
View Related
Mar 30, 2010
I'm trying to manually connect my wireless adapter to my router using WPA. I'm using Madwifi drivers for my D-Link DWL-G630. I keep getting the same error " Association request to the driver failed". I can connect to my router using wep through the GUI. I can not connect using the terminal. I created my /etc/wpa_supplicant.conf file
ap_scan=1
ctrl_interface=/var/run/wpa_supplicant
network={
ssid="NYNET"
scan_ssid=0
[code]....
I run these two commands
sudo ifconfig wlan3 down
sudo dhclient -r wlan3
the I run
sudo wpa_supplicant -Dwext -iwlan3 -c/etc/wpa_supplicant.conf -dd
jmorales@jmorales-laptop:~$ sudo ifconfig wlan3 up
jmorales@jmorales-laptop:~$ sudo dhclient -r wlan3
Internet Systems Consortium DHCP Client V3.1.2
[code].....
View 2 Replies
View Related
Dec 25, 2010
yesterday i update my ubuntu 10.04 lts, and began the problens. i am using 2.6.32-24-generic, in a HP DV6 2145es do we know?
syslog saidme: wpa_supplicant[1093]: Association request to the driver failed search in google i founded that the problem is possible that it is in wpa_supplicant.conf. my fiel is in : /etc/dbus-1/system.d/wpa_supplicant.conf and i think that is necesary be in /etc . it is truh? when i check my fiel, i founded this:
<!DOCTYPE busconfig PUBLIC
"-//freedesktop//DTD D-BUS Bus Configuration 1.0//EN"
"http://www.freedesktop.org/standards/dbus/1.0/busconfig.dtd">
<busconfig>
[code]....
View 7 Replies
View Related
Aug 23, 2011
I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
[Code]..
View 14 Replies
View Related
Feb 17, 2011
Does anyone here have experience with using the Debian Live Builder from HERE? Every time I attempt a build, it fails. I thought it strange that it didn't let me select 'amd64' under 'LB_ARCHITECTURE', 'testing' under 'LB_DISTRIBUTION', or multiple options under 'LB_LINUX_FLAVOURS'. Does anyone see what I might have done wrong?
# Standard options
LB_BINARY_IMAGES="iso-hybrid"
LB_DISTRIBUTION="sid"
LB_PACKAGES_LISTS="minimal"
LB_TASKS=""
LB_PACKAGES="dpkg aptitude wget wvdial ppp sudo"
[Code]...
View 3 Replies
View Related
Aug 22, 2009
Debian doesn't seem to handle the association between wpa_supplicant.conf records, and /etc/network/interfaces. This is in wpa_supplicant.conf:
Code:
network={
ssid="MYSSID"
key_mgmt=WPA-PSK
psk="stuff"
[code]....
What's happening is there are two gray circles as the wifi attempts to connect. The first one turns green, but it never completes the next step. The syslog shows that it's waiting for the (nonexistent) DHCP server to respond. If I turn on DHCP, the connection completes, but the routing is messed up (because at that point it actually tries to use the static IP from /etc/network/interfaces). So it seems to associate eventually, but it's way too late. I need it to associate soon enough to know not to attempt DHCPDISCOVER.
View 6 Replies
View Related
Feb 29, 2016
My Debian Jessie system started to bug after a separate /usr partition being full. After redimensioning and various packages reinstalls I fall on this:
systemctl --user status Failed to get D-Bus connection: Erreur inconnue -1
View 1 Replies
View Related
Feb 7, 2016
I was compiled a new kernel version 4.4 of debain 8.2 amd64, i've issue > tsc: Fast TSC calibration failed, and I'm stay on busybox. Fortunately, I've backup and i can to boot on 4.3 version, it's a choise on startup OS !
I thinking that i compile a new kernel with 4.3 version, i do it, and now have got a same issue (tsc: Fast TSC calibration failed) !
I think that there are adding a new modules while compilation of 4.4 version. I've saw to google if this issue are listing, the answer is yes ! but now i have only 3.6 version for booting ...
View 14 Replies
View Related
Oct 4, 2010
Suspend worked before I completely reinstalled Testing from scratch. Now it seems to suspend OK, but when it tries to wake up it fails. Details here: [URL]
View 6 Replies
View Related
Aug 17, 2015
After upgrading to Debian 8, I'm having a bit of trouble with systemd, since I'm not used to it (seeing as it was all init when I started). I tried to use a tutorial to create a new service and one step in it was to run
Code: Select allsystemctl enable xxx.service
Unfortunately, every time I run systemctl - even without parameters - I get this error:
Code: Select allFailed to get D-Bus connection: Operation not permitted
View 5 Replies
View Related
Mar 14, 2011
New install of Mint LMDE (Debian Testing)
I installed Blueman & paired my headset successfully but I get this error message when I connect my headset, "Failed to initialize pulseaudio bluetooth module. Bluetooth audio over pulseaudio will not work". When I go to Pulse Audio Volume Control, it's not showing in my hardware list.
View 1 Replies
View Related
Jun 15, 2011
I run a mailserver and this is bothering me quite abit. Being going on for about a month now. Running exim4 and dovecot with exim4u. This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
dsghjytyt@yahoo.com
retry time not reached for any host after a long failure period
This is a copy of the message, including all the headers.
Return-path: <andreas@servar.net>
Received: from ip-81-210-201-120.unitymediagroup.de ([81.210.201.120] helo=holly5)
by gwdebian.net with esmtpa (Exim 4.72)
(envelope-from <andreas@servar.net>)
id 1QWpUO-0000yy-ML
for dsghjytyt@yahoo.com; Wed, 15 Jun 2011 14:46:32 +0200
MIME-Version: 1.0
Date: Wed, 15 Jun 2011 14:44:16 +0200
X-Priority: 3 (Normal)
Content-Type: text/plain;
charset="iso-8859-1"
Subject: =?iso-8859-1?Q?lizzie_VIAGRA_=C2=AE_-61%_discount?=
Content-Transfer-Encoding: quoted-printable
From: andreas@servar.net
Reply-To: "RE: Your Recent Job" <Posting>
To: dsghjytyt@yahoo.com
X-Mailer: Microsoft Outlook Express 6.00.2900.2180
Message-ID: <CHILKAT-MID-3b7cf1d5-b3e7-3d78-5c1d-713c0e381cb9@holly5>
X-Antivirus: avast! (VPS 110615-0, 15.06.2011), Outbound message
X-Antivirus-Status: Clean
X-Scanned-By: unscanned primary on gwdebian.net (109.108.198.243); Wed, 15 Jun 2011 14:46:32 +0200
Then alot of random text
I run OSX on my everyday computer so this is not me sending out stuff since the above mail says Microsoft Outlook express has sent it (?) Running a Debian Squeeze server. And I really dont get any other spam due to exim4u setup and spamassasin.
View 14 Replies
View Related
Aug 15, 2011
upon boot I see Starting Clustered TB : ctdb failed! Starting system message bus: dbus Could not connect to database Starting MTA: exim4 startpar: service(s) returned failure: ctdb ... failed!
View 1 Replies
View Related
Mar 22, 2010
i'm using WICD as my wireless network manager. wicd 1.6.2.1 on slackware 13. I need to configure dynamic WEP with authentication, user name and password like shown on the pic. i couldnt find that option in wicd properties or configuration,
View 3 Replies
View Related
Jan 11, 2016
I ran my daily update of Debian Stretch using Synaptic, and when done had an un-installed update for ifupdown remaining marked in the list. By right clicking I was able to get Synaptic to say it would install the update, along with quite a few other updates. In the process of doing this, my screen went dark and stayed dark. On reboot, I get the Grub menu to select which Linux system I want to boot, but whichever one I choose, including older ones, I get to a command line, not the Gnome GUI.
I tried to complete the update of ifupdown using apt-get, only to discover that my machine no longer has any network connection, let alone Internet.
How do I begin to troubleshoot this?
View 14 Replies
View Related
Feb 1, 2010
I recently installed two PC with debian lenny (kernel 2.6.26). One is called serveur-debian1 and the second one serveur-debian2. I have installed gnome,samba, mysql5, apache2, php5, and Virtualbox,bridge-tools on them. On serveur-debian2, i installed an other virtual debian lenny with apache2,mysql5,php5,nagios and centreon on it to view my network. I remember having installed a soft to access nntp on serveur-debian2 in order to test nagios.
Since a few days, i have problem to access to my servers. rom my windows 7 client, i try to ping serveur-debian1. Response is OK but not for all resquets Always from the same computer, i try to ping serveur-debian2. Response is OK but not for all again.
When i launch a ping on serveur-debian1 and serveur debian2 at the same time i have:
ping 1 to 10: serveur-debian1: response OK
serveur-debian2: no response
ping 11to 14: serveur-debian1: no response
serveur-debian2: response OK
ping 15 to 25: serveur-debian1: respone OK
serveur-debian2: @ip serveur-debian1 network unreachable (there's no error, it shows me the ip of serveur-debian1)
If i switch on the debian virtual server on the serveur-debian2, and i ping it at the same time, the response is OK for all resquests. The problem is very strange. I can't have a correct connection and when i launch a request from a software which access the mysql server, the requests failed ...
View 4 Replies
View Related
May 13, 2010
I`m unable to mount my second hard drive I use to store my music and pics and wonder if it is to do with the error "failed to initialise HAL!" which I get every time I start Debian Lenny (AMD64 architecture). I have had this since doing an install (fresh) a few hours ago.
The drive is an ntfs one but when I click its icon in the computer section it says it cannot mount it and gparted says it cannot read the file system.If so how would I get the error box to stop appearing and how do I mount the ntfs drive?
View 2 Replies
View Related
Mar 2, 2011
OS:Debian Linux 2.6.32-5-amd64 Should i need to worry about these error messages? If 'Yes', how to check and fix? When it boot,
/var/log/syslog
Mar 2 23:29:03 ipb167 kernel: [ 1.465629] PM: Error -22 checking image file
Mar 2 23:29:03 ipb167 kernel: [ 4.110123] amd64_edac: probe of 0000:00:18.2 failed
[code]....
View 2 Replies
View Related
May 11, 2011
I'm using Squeeze amd64, installed latest kernel 2.6.38 from backport yesterday. Just now try to check for any update but failed, these messages show.
View 2 Replies
View Related
Jul 14, 2015
I installed linux-image-4.1.0-trunk, when I boot into the kernel there's no wireless available. Dmesg indicates seems like the firmware is loaded, although firmware-iwlwifi is installed:
...
[ 11.047031] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-7265D-13.ucode (-2)
[ 11.047039] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7265D-13.ucode failed with error -2
View 5 Replies
View Related
Aug 27, 2015
Built a machine w/ i5-4440 & gtx 960. I installed xserver-xorg-video-intel & xserver-xorg-video-nouveau. Xorg -configure fails, so I added xorg.conf I found online, makes no difference. xrandr can't open display. startx of course fails.
Backstory: My plan was to dual boot sid + stable as fallback with shared partition. First installed stable and whether connected to mobo or gfx card, I couldn't get login on tty, it would just hang on errors. So I installed sid (this time using lvm to hopefully make partitioning easier) and while I get the "failed to load nouveau" errors on mobo, gfx card gives me a login screen.
uname -a
Code: Select allLinux 4.1.0-2-amd64 #1 SMP Debian 4.1.6-1 (2015-08-23) x86_64 GNU/Linux
lspci | grep VGA
Code: Select all00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation GM206 [GeForce GTX 960] (rev a1)
[Code] .....
View 1 Replies
View Related
Mar 25, 2016
I'm getting BSOD when I'm booting my main system (debian 8 fully updated). I get a BSOD with a _ sign. URL...because I can't access to failed boots files. Besides having the files
Code: Select allfelipe@debian ~ % ls /var/log/journal Â
362d07f9e18b45f8aec4575c347f181d 92e8a448f7a348719da129184a7e6821
Code: Select allfelipe@debian ~ % journalctl --list-boots
 0 0c51ae5b67f144059c5470dbe345d621 vie 2016-03-25 09:05:29 ART—vie 2016-03-25 09:11:58 ART
View 3 Replies
View Related
