Debian Configuration :: Wicd: Custom Template Does NOT Load
Aug 13, 2011
My university has a secure wireless network that has the following specs: WPA2, 1st Authentication TTLS, 2nd Authentication PAP, Encryption CCMP or AES, Thawte_Premium_Server_CA certificate and username and password.
I have never gotten this to work with wicd. First of all, wicd does not have a default template for this configuration. This led me in the past to quickly install Network-Manager (on top of XFCE...). While this has worked for me just fine. Recently I found out that this functionality is possible in wicd by creating your own template. So I did and here it is!
name = WPA2 Enterprise TTLS
author = Andres Cimmarusti
version = 1
[code]....
I did everything outlined here: [URL] (that is I saved the file as wpa2-ttls and then added this entry to the active file in /etc/wicd/encryption/templates/).
Sadly wicd's gui does not load my template!, the logs show no errors!...it simply refuses to take it. I cannot see any mistake in the above... do you?Is this some debian bug perhaps?This is the most important issue for me, before accepting to use wicd instead of NM.
View 1 Replies
ADVERTISEMENT
Mar 20, 2016
I have some old linux based games and applications that require old libraries to run.But in the mists of time, I've lost the scripts on how to set up a sandbox environment to run them. Any template for that type of fiddle? I should be able to resource libraries contemporary to the games from my collection of old distros, but my web fu on this matter(jargon) is cracked. It would have to be easier that continually trying to fiddle the MS OS version to run under Wine/PlayOnLinux. I've got Myst II, Civilisation CTP and Railway Tycoon II, although I think the last app I ran was Word Perfect 8.
View 3 Replies
View Related
Jul 2, 2011
When I right click on a free area of the desktop or within an open folder, I read "Create Document" -> "no templates installed" and "Empty File". How to install the templates in there so I could open a file of my choice?
View 3 Replies
View Related
Sep 1, 2010
I decided to try wireless so I bought a TP-Link pci adapter TL-WN851N and installed it. I installed Wcid and firmware-atheros. I set /etc/network/interfaces to read auto lo iface lo inet loopbackAll Wicd does is tell me "No wireless networks found."
View 14 Replies
View Related
Jan 2, 2011
I'm running Debian Squeeze now, just did an upgrade yesterday. I had wl for my wireless and it was all working fine in Lenny. Now that I'm upgraded, wicd can't find anything at all.
[Code]....
View 1 Replies
View Related
Jun 7, 2011
The laptop runs Debian Squeeze XFCE installed from the Live iso (uname -a gives 2.6.32-5-686 as the kernel) and has Wicd 1.7.0 for network management and uses the ipw2100 wifi firmware/drivers. It connects fine using WEP encryption at home and to unencrypted connections found in a couple of public areas. I have had one problem with a WEP encrypted connection in a cafe (got through encryption, but could not get an IP address. There are workarounds which I will try next time I have coffee there When changing my router to use WPA2, I get 'bad password' errors. There is quite a literature on 'bad password errors' and Wicd and kernel 2.6.32, however a lot of the pages are contradictory. The Wicd log showed this...
2011/06/07 17:25:59 :: WPA_CLI RESULT IS ASSOCIATING
2011/06/07 17:26:00 :: wpa_supplicant authentication may have failed.
2011/06/07 17:26:00 :: connect result is Failed
[code]...
I'm fine using WEP at home, but I need to connect out and about as well and meet WPA2 connections in some locations
View 3 Replies
View Related
Feb 1, 2010
I've been using wicd (1.6.2.1 was the latest version on my desktop computer, maybe it got updated) without any problems for a long time. This morning after switching the thing on to read the morning news with a nice hot cup of coffee I got a number of funny Gui system messages: Wicd needs to access your computer's network cards. Password
View 12 Replies
View Related
Mar 11, 2010
I compiled a 2 custom kernels so far (many custom kernels just 2 that I have used) however, both of the kernels display an error message about EXT3-Fs and unable to load custom options even though all my partitions are ext4.
I have looked around and the only reason I find for those are that the file systems are corrupt beyond repair,However the problems always ments EXT3-fs is a ext3 file system problem and EXT4-fs is a ext4 file system poblem. Why is mine saying EXT3 and some times EXT2 when im using EXT4?
Custom Kernels
Debian 2.6.26.Something with RT patch
Debian 2.6.33 with Rt patch
View 5 Replies
View Related
Aug 4, 2015
On macbook air 6.2, i've installed a Debian jessie mate DE, dual boot using refind. I'm currently fine-tuning it. I've made a script following powertop advice:
Code: Select all[newb@debian /etc/systemd/system]$ cat mba_kb_sp.sh
#!/bin/sh
echo 'auto' > '/sys/bus/usb/devices/1-3.1/power/control';
echo 'auto' > '/sys/bus/usb/devices/1-3.2/power/control';
echo 'auto' > '/sys/bus/usb/devices/1-5/power/control';
exit 0
[Code] ....
All seems to work fine, however when i check the sys file it didn't change. But I can start manually the systemd service and, this time, it works.
View 2 Replies
View Related
Feb 24, 2016
I'd like to create my own custom Debian live CD — the idea being to have my own rescue CD with my favorite Debian tools installed. I read about bootcd and was going to give that a try, after creating the ideal system in a qemu virtual machine.
How much exactly can you install on a system so that bootcd can still fit it on a CD? I'm presuming there is some kind of compression involved. When I tried to create my VM, I coudln't get Jessie + LXDE to install onto a 2GB virtual drive (net install) so naturally I'm wondering what I'm going to be able to put on a 700MB CD.
View 7 Replies
View Related
Mar 11, 2016
I've a problem running jessie on a XEN supervisor; my running kernel and the installed kernel image differ, because the host system forces the kernel at boot time. Current loaded kernel is
Code:
Select all$ uname -r
3.18.12
But I'm not able to install this version from the standard repository.
Code:
Select all# apt-cache search linux-image
linux-headers-3.16.0-4-amd64 - Header-Dateien für Linux 3.16.0-4-amd64
linux-image-3.16.0-4-amd64 - Linux 3.16 für 64-Bit-PCs
linux-image-3.16.0-4-amd64-dbg - Debugging symbols for Linux 3.16.0-4-amd64
linux-image-amd64 - Linux for 64-bit PCs (meta-package)
linux-image-amd64-dbg - Debugging symbols for Linux amd64 configuration (meta-package)
nvidia-kernel-3.16.0-4-amd64 - NVIDIA binary kernel module for Linux 3.16.0-4-amd64
linux-image-2.6.32-5-xen-amd64 - Linux 2.6.32 for 64-bit PCs, Xen dom0 support
Now I'm facing issues loading kernel modules for iptables, because the module path does not exist. Is there an easy way to install a proper kernel image from the standard repositories?
View 5 Replies
View Related
Sep 26, 2010
I've setup my own repository which I want to use SSH as the protocol. I managed to get everything working with an SSH key using port 22. Now, I would like to change the SSH port. I've already changed it on the SSH/repo server. Now I can't figure out how to change apt to use a custom port on the client computer.
My sources.list file line which worked over port 22: deb ssh://user@1.1.1.1/home/user/repo lenny main contrib non-free I've tried: deb ssh://user@1.1.1.1:12345/home/user/repo lenny main contrib non-free and it fails and actually says "failed connecting to port 22"
Can this be done? I've searched google for hours and I getting nothing but unrelated data. I've read the man pages. The man page for apt.conf specified that you can set the port this way for HTTP, but doesn't mention anything about ssh ports.
View 1 Replies
View Related
Apr 21, 2011
I would like to compile a custom xen dom0 kernel. I installed a Debian Squeeze with precompiled xen kernel, and it works fine, but i would like to compile a custom dom0 kernel from source. I tried install kernel source apt-get source linux-2.6 how can I patch this kernel source with xen? but i alway see only the domU kernel params.
View 3 Replies
View Related
May 19, 2011
I have squeeze and I've created my own custum kernel. Howto configure grub 2 to boot with this custom kernel automaticaly?
View 5 Replies
View Related
Jul 2, 2011
I want to build my own binary package that replaces several from the repositories.But then whenever I install something that depends on libffado2, aptitude wants to uninstall mypkg and install libffado2. Why doesn't Provides work here?
View 3 Replies
View Related
Nov 9, 2015
I want to customise an amnesic Debian environment (like Kali Live CD) with everything (Users, background, icons, etc.) set up to work the way I need. This OS should be inside a memory stick, and, most important, it has to have an encrypted partition I can mount and unmount whenever I want to save persistent data.
View 5 Replies
View Related
Aug 3, 2010
I've compiled 2.6.35 for my eeepc, but I have noticed that resulting .deb file is 30mb large. After investigating i saw that modules (and maybe kernel) are compiled with debugging symbols enabled.I've checked my lenny router and modules there are without debugging symbols.So stock 2.6.26 from lenny comes without debugging symbols and linux-image .deb file is around 20mb.Stock 2.6.32-5-686 from squeeze comes with debugging symbols enabled - linux-image .deb here is 26mb. (I have used 2.6.32's .config file to build my kernel, then i did make oldconfig.)I guess this is what increase my kernel size, but how to disable it?Or maybe enable stripping of debugging symbols.
View 3 Replies
View Related
Aug 16, 2010
I want to build a custom system and I need your opinions. I have an old laptop which I want to configure as a system for troubleshooting purpose, my idea is to have multi-boot system with multiple root file systems, e.g. one root file system has only BIND to work as DNS server, another root file system has only Samba, etc., and I can choose which system to boot into from grub, or a custom menu after booting grub.
I thought of setting multiple partitions and install a full system on each one, but I thought that there might be a better way to do this, I'd like to hear your opinions.
View 2 Replies
View Related
Aug 17, 2011
I used make-kpkg to build the 3.0.0 source debian wheezy on a dual 3.4GHz Xeon/L1-16k/L2-1mb/800Mhz bus with 4GB PC2-3200 ECC ram and Ultra 320 SCSI, using CONCURRENCY_LEVEL=4 (2 hyperthreading cpus=4 cores). The build was slower than molasses in January! Top reported cpu usage total between 10% and 25%. Why won't the build use the amount of machine it has available. One footnote: I wasn't using swap space. It literally took over an hour to build the deb kernel package.
My notebook from 2003 is at least three times faster building the 3.0.0 debian kernel source. Is it possible that this might cause improvement: make -j4 KDEB_PKGVERSION=version deb-pkg
over
CONCURRENCY_LEVEL=4 make-kpkg --initrd --revision=123x kernel_image?
Could amd64 vs. i386 have some influence? Could the small processor caches on the XEON cpus have an effect. The 64-bit machine absolutely flies doing everything else. I'm miffed! I've used debian since woody, although I am not an expert, but I'm no slouch!
View 1 Replies
View Related
Sep 20, 2010
I'm trying to configure my new school wireless network (eduroam). Though it *should* work in wicd just fine, it doesn't, it fails with an error saying "failed to authentize". However it works with plain wpa_supplicant. Here's the working wpa_supplicant.conf:
[code].....
I don't see any option in the GUI configuration of wicd that is specified in wpa_supplicant.conf and not in the GUI, so it should generate a proper wpa_supplicant.conf.
Are there some more detailed wicd logs? Is there a way to give wicd the wpa_supplicant.conf part for this single essid and let it use the GUI generated one for the others? Where can I see the wpa_supplicant.conf it has generated for a connection?
View 1 Replies
View Related
May 3, 2011
When I only change a driver file manually, for example /newkernel/linux-source-.6.32/drivers/gpu/drm/i915_drv.h, do I need to run "make config" or similar like "make menuconfig" or can I just skip? I mean these steps:
1.) apt-get install linux-source-2.6.32
2.) mkdir ~/newkernel/
3.) cp /usr/src/linux-source-2.6.32.tar.bz2 ~/newkernel/
4.) cd /newkernel/
5.) tar xjf linux-source-2.6.32.tar.bz2
6.) cd linux-source-2.6.32
7.) cp /boot/config-$(uname -r) ./.config yes "" | make oldconfig
8.) change the driver file /newkernel/linux-source-2.6.32/drivers/gpu/drm/i915_drv.h manually
8.) make-kpkg clean
9.) make-kpkg --rootcmd fakeroot --initrd --revision=custom.001 kernel_image kernel_headers
10.) dpkg -i *.deb
Is this way OK or do I miss something?
View 14 Replies
View Related
May 21, 2011
I' d like to apply this patch into my squeeze: [URL] Can someone pls explain howto apply driver diff patch into a custom kernel?
View 9 Replies
View Related
Oct 12, 2010
When I upgraded to the latest Wicd, it wouldn't load automatically in the startup as it did before.
So I removed the startup entry and am currently having to enter the following commands to get Wicd loaded and get online.
In short, what is the correct procedure to get Wicd loading in the startup?
View 6 Replies
View Related
Oct 16, 2015
I'm trying to set load balancing over 2 ISP link on a router / firewall running Debian Jessie.
There are iptables rules for balancing and forwarding:
Code: Select alliptables -t mangle -A PREROUTING -j CONNMARK --restore-mark
iptables -t mangle -A PREROUTING -m mark ! --mark 0 -j ACCEPT
iptables -t mangle -A PREROUTING -j MARK --set-mark 10
iptables -t mangle -A PREROUTING -m statistic --mode random --probability 0.5 -j MARK --set-mark 20
iptables -t mangle -A PREROUTING -i $wan1 -j MARK --set-mark 10
[Code] .....
There are iproute2 rules:
Code: Select allip route add 172.20.0.0/24 dev eth0 src 172.20.0.150 table WAN1
ip route add default via 172.20.0.254 table WAN1
ip route add 192.168.0.0/24 dev eth1 src 192.168.0.150 table WAN2
ip route add default via 192.168.0.254 table WAN2
[Code] ....
The packets marked as 20, theoretically routed via table WAN2 via 192.168.0.254, are lost.
The WAN2 gateway is working if I set as default without balancing.
I disabled the rp_filter module on all interfaces and I installed xtables-addons-dkms.
I also try this but I had trouble with forwarded connexions.
View 0 Replies
View Related
Dec 28, 2015
I would like my CPU to be overclocked, while retaining frequency scaling capabilities. The CPU is a Core2 Quad Q6700, with a stock speed of 2.67 GHz. In my BIOS, I can manually increase the FSB, but if SpeedStep (EIST) is enabled, the increased FSB is ignored by Linux, and the max speed remains 2.67 GHz. If I disable SpeedStep, then the CPU successfully runs at the higher speed I would expect, but does not scale down when under low load. As it is now, I am only running it at 2.8 GHz.Does CPUFreq *require* SpeedStep to be enabled in the BIOS?
View 13 Replies
View Related
Sep 21, 2015
I have PCI-device and driver for it - tmk1553b.ko
The problem is to make this device work i have to open terminal after system starts and write
Code: Select allcd /path/to/driver
sudo insmod ./tmk1553b.ko d0=1 t0="TAI" misc=1
But idea is that this PC will work without operator so driver must be loaded automatically. As i realized the solution is to make script but when i try google it shows me how and where to put this script but not how to make it. Also i've tried to put tmk1553b.ko to /lib/modules/2.6.32-5-686/kernel/drivers/misc but it doesn't work.
Debian 6.0.10 (squeeze)
Kernel 2.6.32-5-686
View 5 Replies
View Related
Dec 16, 2015
I have recently rented a VPS server so I can run a VPN. Unfortunately, I did not get far in this [URL] ....., I have encountered this error:
Code: Select allxaver@xaver:/$ sudo modprobe tun
ERROR: could not insert 'tun': Unknown symbol in module, or unknown parameter (see dmesg)
So I googled this error and found this: [URL] ....., however response of mine VPS was:
Code: Select allxaver@xaver:/$ ls /lib/modules/uname -r /kernel/drivers/net/tun.*
ls: cannot access /lib/modules/uname: No such file or directory
ls: cannot access /kernel/drivers/net/tun.*: No such file or directory
Code: Select allxaver@xaver:/$ lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 7.9 (wheezy)
Release: 7.9
Codename: wheezy
xaver@xaver:/$ uname -a
Linux xaver 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3+deb7u1 x86_64 GNU/Linux
View 2 Replies
View Related
Mar 8, 2011
I have happily been booting debian through grub2 by chain loading it with efi (rEFIt), until today, and now get to begin another learning experience I've been using linux for a while, and kept seeing the guides for splitting up /, /var, /tmp, /usr, and /home, into different partitions, so I did just that when I switched from Ubuntu to Debian (I've realized that this was a little bit pointless because I formated them all as ext4, but at least it acts as a safety for mission critical drives when I overfill /home. I unfortunately didn't give /tmp enough space, and it kept crashing SimpleScan so I decided to use gparted to resize it.
The operation went alright as far as I can tell, and was straight forward because there was some free space behind it so I only had to append the partition. I synced the master boot record through rEFIt as usual, but when I booted the linux partition grub did load, and only a blank screen is presented. I eventually figured out I could use the gparted live cd to boot back into debian, and have been screwing around for a while with grub commands trying to figure out how to allow rEFIt to successfully boot GRUB on its own again. I ran grug-mkconfig to replace my /boot/grub/grub.cfg file and have rebooted but that did not help.
I tried reinstalling grub and grub-common with apt-get, but I didn't purge configuration settings for fear of losing something important. My current focus is on the command grub-install. I think i just need to run this command with the /boot device, like su - root; grub-install /dev/sda1 or some thing like that. wipe out the MBR on /dev/sda1, or screw up what good configuration is left in grub, so I want to make sure that I'm using the right /dev. Currently the gparted output looks like this:
/dev/sda1: fat32 - GPT (gpt from fdisk, gparted shows EFI with the boot flag)
/dev/sda2: hfs+ - MacOSx
/dev/sda3: ext4 - /root
[code]...
how the gnome live gparted disk would have been able to boot. I have access to a hard drive so I'll probably end up making backup images of as many of the partitions as I can, and then try more drastic bashing around, but if anyone has any suggestions/wisdom they could offer while I'm researching solutions I'd appreciate it. I eventually want to try to axe my osx partition and boot directly from GRUB2-EFI so I figure it is worth the investment in time to get to know grub a little bit more intimately.
View 3 Replies
View Related
Jul 7, 2015
After a hiatus I found my machine to be down, but upon turning it on I get significant errors and dropped into emergency mode (see below). This machine wasn't very up-to-date to begin with, so I'm having difficulty determining the order in which to proceed. A couple naive checks and updates on my part are not working. The file system appears to be intact enough to "cd" around and "ls" to see that my files are all (seemingly) there. But the kernel modules aren't loading which is, you know, a problem.
The state I find it in is that it will begin booting to Linux 3.2 (which I know is no longer supported in testing, see below where I tried to update to 3.16), but fails quickly and puts me into emergency mode
Loading, please wait...
megasas: INIT adapter done
systemd[1]: Failed to insert module 'autofs4'
systemd[1]: Failed to open /dev/autofs: No such file or directory
systemd[1]: Failed to initialize automounter: No such file or directory
systemd[1]: Failed to set up automount Arbitrary Executable File Formats File System Automount Point.
...Then several drives show up as clean....
Running "journalctl -xb" shows that it can't mount the module even though it's there on the disk:
... systemd-modules-load[259]: could not open moddep file '/lib/modules/3.2.0-4-amd64/modules.dep.bin'
... systemd-modules-load[259]: Failed to lookup alias 'firewire-sbp2': Function not implemented
... systemd-modules-load[259]: could not open modeep file '/lib/modules/3.2.0-4-amd64/modules.dep.bin'
... systemd-modules-load[259]: Failed to lookup alias 'loop': Function not implemented
And yet, if I 'ls' that modules.dep.bin file, it's right where it's supposed to be, for the appropriate architecture and everything.
After that (in the journalctl output), it shows several things start up, but systemd-modules-load.service fails:
.. systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
.. systemd[1]: systemd-modules-load.service: Failed to start Load Kernel Modules
...and lots of things fail from systemd-udevd: failed to execute '/lib/udev/socket:@/org/freedesktop/hal/udev_ev_event': No such file directory.
"uname -a" shows
Linux <my hostname> 3.2.0-4-amd64 #1 SMP Debian 3.2.32-1 x86_64 GNU/Linux
I tried updating via apt to the Linux 3.16.0 kernel, but grub wasn't finding it in a way that effects the boot process, and no appropriate "vmlinuz-" file appears with the others on the boot partition. So, I tried switching to grub2 but the update-grub command produces many errors.... For now, grub2 still (attempts to) load the old kernel (3.2) with the same results as I was getting with the old grub-legacy.
Regarding the module-loading features, running "lsmod" shows about 30 lines:
Module
ext3
mbcache
jbd
dm_mod
usbhid
hid
[Code] ....
...I'm at the limit of what I know to check and/or try.
View 1 Replies
View Related
Mar 14, 2016
I built a kernel-module for a new usb wifi-card. This worked well and resulted in a 8821au.ko-file. But now I'm trying to load this kernel module since half an hour and it doesn't work. I copied the ko-file into /lib/modules/3.16.0-4-amd64/kernel/drivers/edimax. If I just type
Code: Select allsudo modprobe 8821au
I get a
Code: Select allmodprobe: FATAL: Module 8821au not found..
But if I enter the full path inside the /lib/modules/3.16.0-4-amd64-folder:
Code: Select allsudo modprobe -v ./kernel/drivers/edimax/8821au.ko
it seems to work:
Code: Select allbuiltin ./kernel/drivers/edimax/8821au.ko.
But lsmod doesn't show me the module after that.
I also added
Code: Select all./kernel/drivers/edimax/8821au.ko
to /etc/modules but this also doesn't seem to work. When booting I get an error-message, but it's too fast to read it and I can't find the right log-file, where the booting-part with the "[ OK ]"-messages is reported.
So my driver is ready, the onliest thing which I can't get working is loading it as a kernel-module.
View 3 Replies
View Related
