I want to back up my data on my MacBook Air using time machine. I have a desktop with Debian gnome installed where I want to store my back up data. But I can't manage to find a hard drive to start time machine on.
I have four hard drives installed in my Debian computer and I also want to share them over my home network. I am very new to Debian ...
it was possible to back up time machine back ups from a mac in ubuntu.
I use a mac at work and use time machine to back up to an external hard drive which i take home each day. I wish to back up the time machine back ups off the external hard drive each day to my computer at home just to be safe is this possible?
I have managed to open the hard drive and have enabled view hidden files so i can see all the files but i am unable to copy them due to permission errors
I used Back In Time (BIT) to back up my data to an external USB drive on Ubuntu 12.04. After problems with Ubuntu I made a fresh install of Debian 8.3. In Debian I have installed BIT and can see the USB drive. However, BIT cannot see the old snapshots. I had thought I would be able to restore on the new install.
View 2 Replies View RelatedFor like windows you can resore your os to a state of peace kind of. If you messed up your vital files you could go back in time and restore you computer to a selected time. I was wondering if you could do that for ubuntu
View 4 Replies View RelatedSo I am trying to learn a little about Cygwin and rsync. I'd like to rsync some data from a Windows machine to a Linux machine. I've got Cygwin installed but I can't figure out how to tell Cygwin were rsync will be pulling the data from; basically, how to set the directories that I want to be rsnyc'd. I've googled and googled but I can't seem to find the answer to this exact question.
View 4 Replies View RelatedI was trying to free some memory as my /var was about to fill.I went to Add /remove software and ried to remove some of the unwanted software and it asked for dependency and i clicked ok.After a while i saw some of my aplication like Evolution,Empathy blackening and i killed the Uninstallation. I was sure by time that something wrong has happened and i did not switch off my monitor so that i can retain my application.I tried lot to increase teh /var so that i can update my yum and install some lost application but allin vain i tried Gparted which can only decrease the size .
I had 40 GB unallocated space so i tried to boot from Live Fedora 12 DVD and was able to see my all the files and filesystem.
All my data in /home was intact.I tried to go to grub and went to boot hte kernel and Initrd and was able to go to #root but again was not able to update the system as network was missing.The SYSTEM was Not booting and stuck in between.
Tried to change the /var to var1 copied /var content to /var1 and made changes in teh /etc/fstab still did not work ,so finally went to repair with Live cd but could not get "Linux rescue" anywhere not even to upgrade option so finally installed the New linux without touching / and /home partition rest were deleted and formatted for new instalation.Now i could not see my data in /home directory although i could see data in /root(old) and all ..i am now lost ..my data is nowhere ..please help me.I can only see /home(old) but it says empty and shows 6 GB unused and 3.3 GB used when seen in Gparted .
Okay so I made a mistake and I have to reinstall Linux (see: http://ubuntuforums.org/showthread.php?t=1602329)
Since I can no longer boot to my existing installation (the graphical version OR the text version), I am having trouble saving off what I don't want to lose.
Can I boot from the CD and get to my stuff through there? I am in the CD version of Mint right now (posting this) and I cannot navigate to /home/myusername/ (obviously). So where would I find those files?
Do I have to mount that partition or something? It looks like a lot of my stuff is mounted already in this CD version... which worries me.
An alternative is that I still have Windows 7 installed that I can boot to if needed. If thats a way to extract my files I am all for it.
I recently upgraded from 9.04 to 9.10 and have been pulling my hair out because of it. I can't get samba 3 back on the machine. It has samba4 and it wont understand my smb.conf. All i want is samba3 back but thats not working.
View 1 Replies View RelatedI am trying to build a media server for my home and still in the process of evaluating my OS options (Ubuntu Server, Fedora Core, or Win Server). I am planning to use four 1TB drives initially for the RAID5 array. Once it fill up i will add more 1TB drives.
My question is can Fedora Core create a RAID5 array and grow latter without having to back up data to external hard drive and re-create the array? I am looking for something that is easy to use and manage. If Fedora Core doesnt have this option, can you recommend other distributions that can do this?
I am trying to build a media server for my home and still in the process of evaluating my OS options (Ubuntu Server, Fedora Core, or Win Server). I am planning to use four 1TB drives initially for the RAID5 array. Once it fill up i will add more 1TB drives.
My question is can Fedora Core create a RAID5 array and grow latter without having to back up data to external hard drive and re-create the array? I am looking for something that is easy to use and manage. If Fedora Core doesnt have this option, can you recommend other distributions that can do this?
I can ssh from my local machine (Ubuntu 10.4 64bit) to a remote Linux server. When I try to copy a file back to my machine (or just ssh to my machine) I get the following error - "port 22: No route to host".ifconfig on my local machine gives one ip address for "lo Link encap:Local Loopback" and one for "wlan0 Link encap:Ethernet"; I tried ssh both.I work on a laptop with a wireless router (which is also the modem)
View 6 Replies View Relatedi want to know whether there is any module to restore my linux machine before 5 days as like in windows
View 1 Replies View Relatedinstalling my APC Back-UPS ES 350. I am using CentOS 5 KDE setup as a DNS Resolving Caching Name Server, I wanted increase speeds and privacy since I got a letter and didn't like that not one bit, a tv show but whatever. It is very secure now, using peerblock with Iblock List subscribed to for the one year and it is so secure that I have to disable peerblock if I want to use online banking and what not.
setup the APC unit, haven't experienced APC and CentOS is new to me, I didn't want to buy a windows server, so I used BIND instead and well I love CentOS, can't wait to really understand it a lot better, also logging into root is so nice and easy vs Ubuntu, very cool.
I also do not have a DD-WRT supported router nor a Docsis 3 modem, docsis 2, I believe this should give me a lot more speed. currently I just get 11-17Mbps, I am hoping this will bump me back up to 35-37Mbps which I get off and on but unstable.
So I am working on a clients PC, and after I saved their data on an external hard drive I left it plugged in while I reinstalled Windows for them.....I HATE Windows. Stupid OS doesnt know any better than to just go deleting everything. Ubuntu would have known better than to delete multiple hard drives like that.
Anyway, please tell me I can salvage this data for my client? It was probably just reformatted. The data should still be there right?
I have a problem I don't know how to solve. Today I bought a netbook and while waiting for the new Ubuntu Unity release to come out, I thought of trying out Crunchbang instead of Windows that came with it. Browsing on my Ubuntu desktop machine, I found a guide for making Crunchbang live USB stick, and i followed the procedure. However, I made a very stupid mistake. The guide said I should enter the command:
sudo dd if=/path/to/iso/crunchbang-10-alpha-01-openbox-i686.iso of=/dev/sdX bs=4M;sync
where "of=...." part should be replaced with the name of the HDD. I forgot that I have an external HDD mounted and mistakenly copied the data to it.
After this, I cannot see the content of my external HDD anymore. Instead, i have this 620mb large Crunchbang-install device.
I know what I did was stupid, but is there a way to get the content of my HDD back? I have some valuable data on it.
A directory /test/test1 is created & under /test1 there are some files & subdirectories with data in it. I had copied the files (text & script files) with command as,
cp -irv /test/test1/.* /test as per the requirement but what i see in destinarion i.e, /test that no files or directory has been copied in /test & the files/directories is also removed from source i.e, /test/test1
so my query is how can i get the files/directories back with data?
So I needed to remove linux from a dual boot, single drive setup I had going. Without thinking I was in Windows XP and formatted the linux partition I had created. After trying to reboot the computer I receive a Grub 1.5 Error 17 rightfully so.
I am having a hard time finding a solution... All I need to do is get the machine back to being able to boot into Windows without any prompts.
How many of you guys use Back In Time as your backup utility? I tried using it, and it doesn't copy all of the folder contents to the backup drive in one pass. For example, it will copy 26 out of 80-ish gigs of data. To further complete the backup, I have to hit the "Take a snapshot" button to do another pass to add more data to the snapshots. I have to do this a couple times to get all the data.Does anyone else have this issue?
[UPDATE] It appears to copy all of the files at once, so long as you only select one backup location at a time. I was backing up an entire multimedia drive, my home directory, and my usb drive. When I had it set to only do the multimedia drive, it copied all of the files, whereas it wouldn't if I had set it up to back up all 3 locations at the same time. I guess the lesson here is to backup one location, then add another, get another snapshot, and repeat.
I have my system and software and data on my computer on an internal drive. On that system I have Back in Time backup software. I use Back in Time, to backup my data to an external drive.
Question: If my computer dies or my internal drive fails, I have to completely re-install everything including my system and Back in Time. If I want to restore my data from the good external drive, how can I do that with Back in Time? Doesn't it keep the Snapshots info or preferences on my dead drive? Or do I need to point my freshly re-installed Back in Time just to the data drive and it will recognize the snapshots etc. automatically?
I've been using Back in Time on Maverick (originally on Karmic) for some time but in the last couple of weeks I haven't been able to make new backups. Here's my output:
Code:
[REDACTED: ~]$ backintime -b
Back In Time
[code]...
below is the default for a week using the program backintime@weekly nice -n 19 /usr/bin/backintime --backup-job >/dev/null 2>&1Did I edit the crontab right for once a week on friday at 12am?0 0 * * 5 nice -n 19 /usr/bin/backintime --backup-job >/dev/null 2>&1
View 1 Replies View RelatedI stupidly unplugget my USB-cable, which was connected to my Nokia music phone, just as if I were in Windows. What do I do? I've lost my music on the phone, or, it seems it may be there (the correct mass of data), but my phone now tells me there is no music... Can I recover this? And - what is the correct way to unplug a USB unit in Ubuntu? To make it work, and find the phone/drive - I just typed "sudo lsusb" in the terminal, and it found and opened the memory automatically... How should you unmount the USB, and maybe even how do I get my data back?
View 7 Replies View RelatedI believe that the attacker somehow got in through the ssh daemon(OpenSSH 5.3p1) on June 12. From here, a user account named "crond" was created(can anyone confirm weather this is normal?) and according to the log, this account was accessed several times between Jun 12 and Jun 18 from the same ip address. Also on Jun 12, the MOTD on the ssh server was messed up and remained that way until it was reinstalled. The default ssh client(OpenSSH 5.3p1) was made completely non-functional.
I became alerted to the problem when my ISP advised me to run a virus scan on the machines on my network. Not knowing of any linux based anti-virus software, I decided to check for suspicious files on my hard drive. I found one, in the /tmp directory was a subdirectory called ".popscan". Inside was a script and a list of about 40 very default sounding usernames and passwords. There was also a file called "back.txt" in the root of my filesystem. Which is a pearl script that aparently spawns a shell.
At this point I disconnected the server from the internet and mirrored the drive. I found a suspicious home directory for "crond" I'm hesitating on setting up the server again for fear that it might just get rooted again. I would also like to find out how he got in so it can be prevented for other people aswell.
I want to know which backup tool is used in Linux to back up data from windows machine to linux machine, is amenda? Please guide me.
Also tell me where to download it from?
I'm trying to connect to the VPN of my employer; after fix various minor issues I reach this point in which the DNS entries and the default gateway of the VPN are overwritten with the values of the eth0 device that appears by default. Therefore the vpn is not useful.
View 1 Replies View RelatedI installed Ubuntu 10.04 LTS onto a blank hard drive with the prospective goal of running WoW on it. I installed Wine and all my security updates and restarted; everything worked fine, but I noticed that the system was suggesting that I get some "proprietary" drivers for my HD Radeon 4550 card. I proceeded to install them and was told that the the OS needed to restart to make the changes. I clicked the close button, restarted from the menu in the top-right hand corner, and when my machine started back up -bam!- frozen on the ubuntu splash screen.
I'm reinstalling now (after trying everything I could think of) and I just want to know how the hell this happened, and how I can avoid it in the future. I'm trying to make the switch from Linux to Windows, but this isn't making it any easier. Also: is there any way I can set up ubuntu to look and interface like a windows clone.
i am using window and linux in a single laptop.i want to access the files in present in linux os ,into the window machine.
View 5 Replies View RelatedI am looking for a way to see if it is possible to copy the system state of a system to another system.Is it possible to simply move the folder structure over to another machine, and have it work? Do I need any special partitions for /var, /home, etc?My machine is dying slowly, and I really want the quickest way to migrate the system over to the new system.
View 7 Replies View RelatedMy time keeps getting thrown off by about 15 minutes. It corrects itself randomly but then goes back! Not sure yet if it's decrementing slowly or if it takes 15 off all at once.ntpdate ntp.ubuntu.com puts it back, output is:Code:15 Jul 08:09:29 ntpdate[6157]: step time server 91.189.94.4 offset 1056.199059 secCurious what the "offset" means. Is there a way to ensure it keeps constant time without having to do it manually?
View 5 Replies View RelatedI have installed ubuntu 10.10 for a short time, now I meet a problem:I always leave for lunch and leave my computer without turning off. When I get back, it shows a window. after I input my password, I enter my system.Then It halts, the only thing what I can do is moving mouse. After halting for nearly one minute, it resumes to normal.I hope someone can tell me what happens.
View 2 Replies View Related