Debian :: Define A Card As The First One, Into ALSAMIXER?
May 18, 2010
Alsamixer is better now since one can press F6 to select the card and tune it. but well, ok, when one has several cards, if you have a mic, alsamixer is not bright and select it as first card, so one resutls into no sounds.OK, alsamixer is nice, but man, how to select a specific card and select it as defautl. Then at reboot, I wish to have sound. Is that possible with Linux or shall we wait a stable version of Debian whcih works, simply ?
I have two network card in my computer. 1. eth0 is set to automatic obtain IP from provider (DHCP) 2. wifi0 is set to static IP (local) 192.168.1.1
My ifcfg-wifi0 is configure in /etc/sysconfig/network-scripts/ifcfg-wifi0 as below # Atheros Communications, Inc. AR5212 802.11abg NIC DEVICE=wifi0 ONBOOT=yes BOOTPROTO=static IPADDR=192.168.1.1 NETMASK=255.255.255.0 HWADDR=00:17:9A:75:48:37
my /etc/sysconfig/network NETWORKING=yes HOSTNAME=pc1.homeserver.in
eth0 IP is connected to broadBand internet service provider device WiMax and IP change time to time from internet service provider. How can I get IP for gateway in /etc/sysconfig/network. I am using Redhat enterprise Linux 4.
I have a Creative SoundBlaster live SB0490 USB sound card. Alsamixer only shows a mic channel for this card although it has a line in. Is this because it is not supported or how it is meant to be? I have problems with no audio out on a program which directly accesses the card as hw:1 although it is actually using it and wonder if this is all related. Strangely I can play sound through the card using rythmbox.
Code:
uname -a Linux gvj-laptop 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 i686 GNU/Linux gvj@gvj-laptop:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
i don't know what this os want from me one moment everything is fine the next it's not first of all it started asking me to choose resolution on startup it said undefined b31 and i have to press enter then 366 for 1024x1280 32 bit how can i fix this problem how can i define 366 resoultion as default and how can i update the screen card driver for 10.1 i have ati hd 3650 agp card. and by the way what are the cool things i can do with graphics here except the rottaing windows.
My usb sound card has been identified by alsamixer, however it won't make any sound when i put headphones in it. The volume is up, I know the sound card works.
My probelem is with alsamixer. I can't record anything; nothing I play back hasany sound. I have alsamixer capture set on mix. I know I recordedin the past with this setting, so I don't know what is happening. I amrecording from the internet.When I adjust the volume on playback in either alsamixer or kmix thevolume settings change on the other as well. when I adjust thevolume setting in capture it doesn't affect each other.If I have Kmix > inpur > capture enabled I can record, but the playbackdoesn't sound good. I would like to figure what is wrong with alsamixer.
I can't believe I'm still struggling with this sound problem. But I haven't given up and have no reason to do so. So I been playing around with alsamixer and noticed that everything had a option except the PCM section. See here for pic... So if anyone has any solutions to add to my hunt to fix this.
I'm using Debian Wheezy last version with OpenBox (without Gnome) and i would like to start alsamixer to change the volume but, look what happens in my terminal, I'm using terminator:
I've got a Toshiba L650, Debian testing/unstable, KDE4.4.5. The sound worked when I first installed everything (played a movie in dragon player, etc), but shortly thereafter it stopped working. It seems like the hardware is okay (all hardware is recognized, all relevant modules loaded, volume in alsamixer at 100%, the system beep -- set in the BIOS -- works), but I still can't get sound to play. Once or twice, right before KDE shutdown, I could hear the exit sound, but that's it. Last night I exited KDE (without hearing a sound), shutdown kdm, then:
mv $HOME $HOME.backup mkdir $HOME and restarted kdm and kde...still no sound! I created another user, and still no sound!
I've created a package and added package conflicts entry in it's control file(in my case, all the lib-mesa packages). Now each package that depends on lib-mesa cannot be installed. How can i define my package as alternative to lib-mesa, so i can install those packages ? Is there a way i can add my package as an alternative in the package dependencies(the ones that depends on lib-mesa)?
I'm trying to define the partition table type (I want to set it to msdos) for an automatic installation using preseeding file. (Why? I want to setup a software RAID 1 with two 2TB disks, by default the installer uses gpt partition tabless on those disks, where it's tricky to install grub(2), as there is no mbr, and the root partition is on a md device) During manual installtion it is possible to set the partition table type (by setting debconf priority to low).
[Code]...
Does anyone know what I have to put in my config file so that a msdos partition table will be created Also any other solution is welcome. I just want to have my root partition on a raid 1 and have grub installed, so that it boots up (No other OS is installed on the boxes. Debian squeeze is used)
I just bought a new graphics card and installed it. it works perfectly although my sound worked perfectly this morning and I think the graphics card is overriding my built in sound card. I need help fixing the sound. The graphics card I bought is an ATI Radeon Cedar HD 5450 The sound I want to use is HDA VIA VT82xx when I run alsamixer I get Card:
I have an on mobo sound 'card' with an ordinary stereo jack that I use, but one of my graphics cards (Raedon) also has sound built into it. I don't use that, because the connector is some new thingie that I don't need or want.
Anyway, every other distro sees the two sound devices and automaticaly picks the right one and uses it with no trouble. (One distro, can't remember if it was fedora ... asked me to pick the device I wanted, but there was no trouble after that). It seems that with Slack, alsaconf, tho it lets me pick the right card, doesn't send that choice to alsamixer, so that the latter tries to unmute the wrong card.
'alsamixer -c 1'
fixes everything. This looks like a bug to me, but it also looks like it would be very easy to fix by just telling alsaconf to tell alsamixer which card to unmute, as seems to be done in other distros.
Each time I boot into Ubuntu I have to mute the External Speaker within Alsamixer GUI in order to get sound.I have made several attempts to save this setting but without success Also read numerous threads and google search tips but no matter what I try it still results in having to open Alsamixer and manually mute the setting each time I launch Ubuntu.
This is pretty simple. I want to know if there is a way to save my settings in alsamixer. I hate having to have to access alsamixer everytime I boot my computer.
I was finally able to make the internal mic of my Vaio w12 work properly both sound recorder and in skype...I added this line in alsa-base.conf
Code: options snd-hda-intel model=auto The problem is that everytime i restart the netbook the "Input so" switch automatically to "Front mic" instead to keep the setting "Int mic".
I tried to use sudo alsa ctl store but nothing change...Maybe there is another way for to set "input so" to "Int mic" by default.Im using Ubuntu 9.10 desktop 32 bit.
I use a Toshiba L300 Laptop and an Acer Aspire Netbook. After recent upgrades to Lucid I have to use the terminal to access alsamixer and turn up the sound on both when I boot-up. I have to do this every-time I boot up as it doesn't remember the change.
I'm running fedora 12 on my Asus Z92VA laptop. Everything is running fine, except for the fact that I have no audio on my headphone. When I use the command "alsamixer -c0", there is no listing for the headphone.
When I use the command "cat /proc/asound/card0/codec#* | grep Codec" I get the following output:
I am not getting any sound with rythembox. My sound levels are mute with some of the bars in alsamixer. I do not know how to adjust the bars to unmute, or to raise the sound once unmuted.
At this time I have an ASUS VH242H 1920x1080 monitor connected to an MSIGeForce GT440 via HDMI 1.4a. The operating sytem is Fedora 15 with allavailable updates installed. Video operates beuatifully, sound is non-existent.I have spent a good morning reading over all manner of references to thisseemingly common problem and I am now mentally dizzy.Here is the output of aplay -L:
I was having trouble with using my T500's internal microphone, and I figured out that if I run alsamixer in terminal, and if I increase the level of "internal mic," then it works fine. Now the problem is that it seems periodically the setting reverts and I lose the mic volume and I have to re run alsamixer and do the setting again.
Is there any way I can set this setting in KDE, and preserve the setting once it is done?
since updating my laptop to 10.04, I can't get any sound out of my headphones. If I plug the jack in, the sound from the loudspeakers turns off, but the headphones stay quiet.
I have run alsamixer and in fact the volume for the headphones is stuck to zero, and it's not possible to increase it.
My hardware config is posted here: [URL]
What I find funny, is that amixer reports that I don't have the capability of regulating the headphone volume:
Simple mixer control 'Headphone',0 Capabilities: pswitch penum Playback channels: Front Left - Front Right Mono: Front Left: Playback [on] Front Right: Playback [on]
I have also used the AlsaUpgrade script to get the latest version of alsa, but it still doesn't work.
