Debian :: Apt-get Error HTTPS In Line Commands
Jun 29, 2015
I have installed debian 8 on acer aspire one, all run well but when i do the Command's VT320, i have errors with HTTPS protocol ! Since the browser Iceweasel, the connexion of web sites HTTPS work well ! This is the sample of "apt-get" with google Chrome :
Code: Select allroot@sta-krups:/home/phipo# apt-get install chromium
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Paquets suggérés :
chromium-l10n chromium-inspector
[Code] ....
I have checked if the problem is with Openssl, the server is installed, and work well.
View 4 Replies
ADVERTISEMENT
May 21, 2011
I am trying to get 2 things to operate on the same line, for example echo Current Version: [cat /file/ver.txt] is there a way to do this?
View 1 Replies
View Related
Jul 29, 2010
I have a few questions to ask, so please pardon me
1) How to check for https in commands config file for Nagios? I only know how to check for http, not sure for https.
2) The log file in Nagios, is it possible to extend Nagios's plugins (or are there already have plugins existed) so that we could actually make use of the log file to check for status of each and every services in different hosts, instead of looking through the log file manually which can be very time-consuming if the list is very long.
View 10 Replies
View Related
May 22, 2011
I have set up certain portions of my web site to be forced https:// How do I force, non https:// protocols. I know this sounds confusing, so let me give you an example.
[Code]...
View 7 Replies
View Related
Apr 18, 2011
I have issue with lwp. A https get request returns 400 error. How ever I am able to get 200 response using a browser. I am not using any proxy.
View 1 Replies
View Related
Jul 13, 2010
I am using the curl version 7.21.0. When I try the curl command from command like, things works fine for the http sites. But when I try https I get certificate error. I have source compiled curl with latest OpenSSL. I have also tried downloading the latest certificate bundle. With the same version of curl, same version of openssl with same certificate file I can get it work on the linux. But in the QNX OS I get this error.
./curl --cacert /mnt/temp/curl-ca-bundle.crt -v https://www.paypal.com
* About to connect() to proxy 172.16.2.17 port 8080 (#0)
* Trying 172.16.2.17... connected
[code]...
View 1 Replies
View Related
Sep 8, 2010
I am trying to configure test site with https mod_ssl for a few days with no success.
Now I got this message:
And this is second day I can't move on. I try to config https site on my localhost in order to test functionality and etc.
I get this as output in curl
Code:
View 7 Replies
View Related
Aug 22, 2011
I'm developing in java.
I want to create a GUI interface for some command line commands (drush - drupal).
How can I interact with the command line commands with java? or any other languege?
View 6 Replies
View Related
Sep 3, 2010
I'm running Suse 11.3 with KDE4.I have an icon in my Kickoff Application Launcher for xterm. WhenI click on the icon, it apparently executes the command /usr/bin/xterm which generates a large window with a large font.I would like to get a smaller window with a smaller font. I knowhow to do that on a command line but to execute the commandI need to _already_ have a window open so I can run the command.So how do I (a) add a new icon to the KDE launcher which generates the command I want or (b) change the existing iconso that it executes MY command and not the basic /usr/bin/xterm?
View 2 Replies
View Related
Sep 27, 2010
I'm getting this error when restarting clamav-daemon:clamd libClamAV Error: cli_dbgets: Line too long for provided bufferThis happened on two systems today after I upgraded via apt. Versions used: Debian Lenny w/ clamav-daemon 0.96.3+dfsg-1~volatile1Has anyone seen this and know what to do? clamd seems to be running, and the
View 1 Replies
View Related
Aug 1, 2010
I am trying to build an Net-SSLay package for my Slackware, it is required by webmin to support https.
When I start the Slackbuild script I get this error:
Quote:
What can be done to make this work? Or is there any better way to make webmin working with https?
My OS is Slackware 13_64 and webmin is 1.510 (the latest version).
View 4 Replies
View Related
Jun 23, 2010
I just want to know that how can I execute my scripts (example.sh) files like other normal commands from command-line. Please describe the full method
View 5 Replies
View Related
Jul 17, 2011
Is it possible to provide encryption over HTTPS without a certificate?
I can't afford a certificate from a CA, but I do want to provide encryption with my website... without a self-signed certificate because I hate that screen popping up on the clients computer on first visits.
View 4 Replies
View Related
Oct 2, 2010
just found that iceweasel is unable to serf any https sites, thou can serf http sites.
View 7 Replies
View Related
Jul 4, 2010
For some reason I was trialing a SUSE 11.1 SP1 version for a while and somehow I have NO clue it attempted to change itself to a OpenSUSE 11.1 System. I have no clue what I did, please don't ask Now though I have been successful in turning into an OpenSUSE 11.2 system by changing the repositories to OpenSUSE 11.2, doing a "zypper refresh", "Zypper in Zypper", "Zypper dup -d", "Zypper dup". I also did a repair and refreshed the base packages with an OpenSUSE 11.2 DVD and that seemed to help also. The only thing it seems I can get right is that yast/yast2 give me this error: Download failed: Failed to download ./repo/repoindex.xml from https://nu.novell.com/?cookies=0&cre...NCCcredentials
[Code]...
View 9 Replies
View Related
Jan 5, 2011
I am trying to create a RS232 C program that executes a series of commands down the line to a robot. Everything seems to work fine, except any sequential write to the serial port. At first I thought it was the UART's buffer being filled too fast, but even with a 50 uS delay it still throws the error.
Here is my code:
Code:
#include <termios.h>
#include <stdio.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/signal.h>
#include <sys/types.h>
[Code]...
View 1 Replies
View Related
Apr 29, 2011
...../etc/init.d/before.local...System Console Stolen at line: 266 This line of red warning consistently appears immediately after something that ended with /etc/init.d/before.localThis is during the boot.Have anyone see it before ?It appears both in kernel versions:2.6.37.6-0.5-desktop2.6.37.1-1.2-desktop
View 3 Replies
View Related
Mar 16, 2011
This is where it starts: I have 2 networks. The first: 192.168.1.0/24 composed by the router which has access to the internet with the IP 192.168.1 and the server (who is a gateway) with the IP 192.168.1.42 The other network: 192.168.2.0/24 composed by the gateway with the IP 192.168.2.1 and the clients (on the 192.168.2.0/24 subnet). To sum up, the gateway has 2 IPs (192.168.1.4(eth0) and 192.168.2.1(eth1)). On this gateway, I have squid installed (and listening on port 3128). I also made a redirection to redirect some computers who want to access to the web (port 80) to squid (port 3128) with this command: /sbin/iptables -t nat -A PREROUTING -m mac --mac-source CLIENT_MAC -p tcp -m tcp --dport 80 -j REDIRECT --to-port 3128
At this stage, everything works fine. The clients can access the web by the proxy without "knowing". What I wanted to do, is redirect also the port 443 (HTTPS). Actually, when a client wants to access to, for example, [URL]. He cannot. So I would want to be able to redirect people (without passing by any proxy) directly to google. Like a NAT. But the problem is that I can't. The thing would be to, in the gateway, take all the packets with port 443 in destination and handle them to the router 192.168.1.1. Then, when the router sends the packet back, the gateway takes the packet and handles it to the client. I tried putting ip_forward to 1, but the problem is that all IPs and ALL PORTS are forwarded. And I just want port 443 to be forwarded.
View 4 Replies
View Related
Jun 24, 2011
I'd like to measure network latency for SNMP GET request. There is a free command line tool time which can be used to find timing statistics for various commands. For example it can be used with snmpget in the following way:$ time snmpget -v 2c -c public 192.168.1.3 .1.3.6.1.2.1.2.2.1.10.2IF-MIB::ifInOctets.2 = Counter32: 112857973real 0m0.162suser 0m0.069ssys 0m0.005sAccording to the manual, statistics conists of:
the elapsed real time between
invocation and termination,
the user CPU time (the sum of the
[code]....
View 3 Replies
View Related
Mar 6, 2010
I have a code over there. It reads a line from file and converts contents of it to double.
Code:
/*
* fileRead.c
[code]...
View 2 Replies
View Related
Apr 26, 2011
I'm trying to get https/443 traffic go through squid.
View 3 Replies
View Related
Oct 30, 2015
How to best manage both http and https pages on the same apache-server without conflicts. For example, if i have both 000-default.conf and 000-default-ssl.conf pointing to mydomain.com, and don't want users who visit mydomain.com without specifically type the https-prefix to be redirected to the https-page - how to handle users using browserplugins such as https-everywhere etc?
Another option would be to create a subdomain ssl.mudomain.com and have users who want to reach the ssl site to have to type ssl. I have tested several things with https everywhere enabled in my own browser, and it seems really hard to make this working the way i want, in one way or another i always end up getting redirected to the ssl-site automatically.
The reason i need this to work is because i run one site that i don't care much about SSL, that is the "official" part of that site, and i also host some things for friends and family on the SSL-part. This would not have been a problem if it wasn't that i use self-signed certificates for my ssl-site and the major user become afraid when a certificate-warning pops up in their browser and therefor leave the site.
View 2 Replies
View Related
Mar 10, 2011
Is it possible to carry out mysql commands directly from the ubuntu cli rather than open mysql?eg to create a database I would normally type
Code:
user@localhost:~$ mysql -u root -p
then INSIDE the mysql CLI I would type
[code]....
View 3 Replies
View Related
Feb 1, 2010
I am trying a release of Ubuntu has have run into a problem that does not make much sense. I am receiving the following error: Syntax error on line 20 of /etc/apache2/sites-enabled/portal: Invalid command 'ProxyHTMLEnable', perhaps misspelled or defined by a module not included in the server configuration
fail! I believe the modules required for this is apt-get install libapache2-mod-proxy-html and it shows under the available modules and it was enabled with a2enmod proxy-html.
The line from the config is ProxyHTMLEnable On. The release is the latest download with updates from, 32bit.
View 4 Replies
View Related
May 1, 2010
simple scan error as follows: Failed to save file ImageMagick returned error code 11 Command line: convert -adjoin /tmp/simple-scan-DA9MBV.jpg /tmp/simple-scan-XCK4BV.jpg /tmp/simple-scan-NZVYBV.pdf Stdout: Stderr: using karmic note: I have apparmor extra profiles installed but didn't notice one that related to simple scan or imagemagick. Red herring or not?
View 6 Replies
View Related
Nov 3, 2010
I am getting Illegal instruction error commands like yum:
I have centos 5.3
View 3 Replies
View Related
Feb 1, 2011
I'm trying to make some pages. For this I try to host them locally. However, when I have an error in my PHP code, the server shows an internal error 500 page and doesn't show on what line and what compile error it encountered. There is no such information in the error log either. What should I do about it, it's not really nice to comment all the lines and then try to uncomment them one by one. I've been googling for a while, but didn't find anything.. I forgot to mention, I;m using Fedora :P, the apache that came with it and mysql and php from the repository...
View 3 Replies
View Related
May 22, 2011
The panel plugin from xfce4-mixer has a bug:s icon doesn't update as the volume is changed. This bug has already been reported.One curious thing about it is that, if you right click on the volume icon on the panel, go to 'Settings' (or 'Properties', I don't know, mine is in Portuguese) and then close the window that pops on the screen, the icon is updated.Is it possible to open and close the settings window automatically with a bash script? Like this, I could associate this script with the volume keys of my keyboard, so that the icon is updated as the the volume is changed.
View 2 Replies
View Related
May 30, 2011
How can one have commands in cron? I do not know much but do know that there is something called cron. I read the manpage[quote=Cron Debian Man page]cron - daemon to execute scheduled commands (Vixie Cron)[/quote] and it says to make files in /var/spool/cron/crontabsWhile I went to /var/spool/cron/crontabs I did not find anything there. I just want to tell cron that it runs $sudo aptitude autoclean at some time in the background. Is this possible? If yes, then how ?
View 5 Replies
View Related
Mar 9, 2016
I'm messing around with a new install of Debian 8, trying to get a sandbox of Oracle DB 12c up and running in an ESXi environment.
open-vm-tools was giving me troubles (resizing the window didn't make the resolution change), and Oracle DB was fighting me with environmental variables.
Well, while I was troubleshooting the Oracle issue, I needed to reboot. When it came back up, I couldn't log in. When I attempt to log in using known working credentials, the screen goes black like it should, and then loads the login screen again.
I SSH into the box and try to run commands, but every single command I run returns "Command not found" including "ls" "su" "cd".
I'm able to boot into recovery mode, where the commands work under root, but I'm not sure what to fix....
View 6 Replies
View Related
