Debian :: Unable To Serf Https Sites
Oct 2, 2010just found that iceweasel is unable to serf any https sites, thou can serf http sites.
View 7 Replies
ADVERTISEMENT
Ubuntu Networking :: The Phone Can Access The Internet Through The Computer Unable To Get Access To Https Sites, Like Webmails
Dec 31, 2010I managed to configure my W890i phone to get access to internet through an ubuntu-based computer. It's very easy to use the phone to give internet access to the computer, but the opposite is quite more tricky. For that I've done the following
----On the phone---
-Set the USB network option to "through computer", so that the phone uses the computer's internet connection and not the opposite.
-Decide and set "Shared Network" parameters: user, pasword and workgroup.
-In "conectivity-> internet connection" set "allow local network" to "yes"
----On Ubuntu 10.04---
-Install samba, samba-client, smbfs, smbclient, firestarter and dhcp3-server
-Configure Samba (System-> Administration-> Shared folders): same workgroup as in the phone, add new user (the phone), passwd this new user. In my case the user was called "w890i" and the password given was the same.
-Once the phone is connected to the computer through USB (then select "phone mode"), a new connection appears in NetworkManager: usb0.The aim is to create a shared network that gives internet access to this device. Edit the IPv4 parameters of this new connection, set them to Manual and give an IP adress (192.168.0.1) and a subnet mask (255.255.255.0); the rest of the fields are left empty.Connect this network.
-Set firestarter to use dhcp3: sudo ln -sf /etc/init.d/dhcp3-server /etc/init.d/dhcpd
-Launch firestarter and follow the wizard. Set "allow internet shared connection", choose the device for the primary internet access, and then the device for the shared network (usb0). Then change the settings for firestarter: activate DHCP for local network, set IP to the one we gave before (192.168.0.1).
-Open dhcp3-server config file sudo gedit /etc/default/dhcp3-server And set INTERFACES="usb0"
-Set the policies of firestarter: in incoming connections, allow connections from the IP adress given to the phone (192.168.0.1). Then add rules for the ports that need to be open for this connection. I opened HTTP, HTTPS, SMB, SMTP, POP3, IMAP, IMAPS, DHCP for all the connections in the local network.
-Apply policies and start the firewall.
------------
After all this, the phone can access the internet through the computer. Two problems appeared:
1. I couldn't get access to https sites, like webmails. The phone gave a "communication error". But then I tried with Opera instead of the browser built in the phone's firmware, and I could finally get to https sites.
2. I couldn't retrieve mail, neither POP nor IMAP nor IMAPS. I thought it was a firmware problem again, and I tried out several mobile phone email clients written in java, but none of them worked.
So this is at the moment the problem. If I connect from the phone to the internet directly through 3G, the email clients work for all my accounts. I don't think it's a firewall problem, because the ports are opened for this connection
Ubuntu Security :: How To Block The HTTPS Sites
Jun 17, 2011I want block https sites if suppose block the http it will opening in https.
View 9 Replies View RelatedUbuntu :: HTTPS Sites Not Accessible On 11.04 With Solution?
Aug 9, 2011i hav the problem ...n i am having solution for it. ...i searched a lot on forum .but didnt find any proper solution for my problem. problem : " Cannot access some sites on Ubuntu 11.04 specially HTTPS sites. loading of certain sites was really slow" Solution : well. i found no one who could gave me solution that worked. so i studied some linux n here is solution ..ON terminal : sudo pppoeconfthen just follow instructions ...set to default every thing. it will configure all ur net settings on its own.restart ur pc. no need to dial anything. the net will auto dial itself without any problem..just make sure...u do it correctly ..read instructions..
View 5 Replies View RelatedRed Hat / Fedora :: Install Squid3.1.x To Block Https Sites?
Jul 15, 2011how to install squid3.1.x to block https sites?
View 1 Replies View RelatedUbuntu Networking :: HTTPS Sites Like FB And Hotmail Not Loading Properly ?
Jun 22, 2011I am using Lenovo G550 laptop wid Intel Dual Core 2GHz, 2GB RAM, 250GB HDD, etc. Earlier I had 2 partitions 187GB (Windows 7) and other 33GB of Lenovo drivers. I split 187GB to 143GB (Windows 7) while remaining 44GB for Ubuntu 10.10!
Everything's been working fine except for internet. I am unable to load many https sites like fb, hotmail, etc. Gmail is working absolutely fine.
I did some research on this forum and disabled ipv6! I also checked for firewall and it was disabled. Then I also configured Open DNS and checked if it is working fine. But nothing has helped.
When I connect to these sites without 's' in https (i.e. only http) these sites load fast. I enter my username n password and then I am redirected to a compulsory https site which then takes me to a page like this (shown in thumbnails)! I have tried Chrome n Firefox 3.6 (which have SSL and TLS checked in preferences)! All these sites are working fine on Windows 7. But I don't want to use Windows 7 every now and then because it has become too slow and boring! Please help me with this.
I connect to internet using DSL wired (BSNL Broadband 256Kbps)
Ubuntu Networking :: Slow Loading / Access Of Sites Using Https?
Jul 8, 2011I'm on Ubuntu 11.04 and have wired internet connection.
Some sites (particularly https) take very long time to load . Sometimes I get "Page is taking a long time to load . Reload the page later" message.
Now , this is happening for some http webpages also.
This is not a problem with browser.
I have firefox , chrome , chromium and konqueror installed.
Also I can access all these sites properly from windows so it is not problem with my internet connection either.
Slackware :: Midori From Slackbuilds Ssl Handshake Failure When Visiting Https Sites?
May 19, 2011Everytime I try to visit a secure site I get ssl handshake failure with Midori from slackbuilds and xxxterm compiled from source.
View 6 Replies View RelatedFedora :: Unable To Open Https Websites On 10 & 11
Jul 24, 2009I have installed Fedora 10 and centos 5.3 on 30 system in my home office. everything works fine except accessing https websites. the problem persists in both centos and fedora even after changing firefox versions. what's worse is the problem is not resolved after changing other browsers. so the problem is not browser-centric. i think it has something to do deeper in fedora and centos. also note that i have disabled firewall and selinux but in vain. the problem is still there across all the systems. it's really a show-stopper for me.
View 7 Replies View RelatedServer :: Unable To Access Repo With SVN+HTTPS?
Jul 7, 2011I am running Ubuntu 10.4 with Apache2, SVN and SSL. Both HTTP and HTTPS are working correctly with my website. Although the SVN setup I have is not working. This configuration gives me a 403 error.
Code:
<Location /svn>
DAV svn
SVNParentPath /srv/svn/repos
SVNListParentPath On
[Code]...
This issue is driving me up the walls. If there is any additional information, I will be more than happy to provide it.
Ubuntu Servers :: HTTPS Forced Non Https:// Protocols?
May 22, 2011I have set up certain portions of my web site to be forced https:// How do I force, non https:// protocols. I know this sounds confusing, so let me give you an example.
[Code]...
Fedora Networking :: Unable To Open Some Sites In 14
Jun 16, 2011I am using Fedora 14 and i am unable to open a few sites e.g
[URL]
I read in the forums that this could be bcoz of ipv6 and i have disabled it(or so I believe )
but still i'm unable to open the site.. the page loads half and gets stuck ...
Ubuntu :: Firefox Unable To Get To Non Authenticated Sites?
Feb 24, 2010I'm using Firefox 3.5.8 on Ubuntu 9.10. It seems it has gone crazy when visiting a site with a broken authentication.
Previously I could see a message warning that there were problems and asking if I wanted to continue understading the risk. Now it seems that this page is broken: I get an XML error saying
Code:
Errore interpretazione XML: entit� non definita
Indirizzo: jar:file:///usr/lib/firefox-3.5.8/chrome/browser.jar!/content/browser/certerror/aboutCertError.xhtml
[Code].....
Applications :: Unable To Open Some Of The Sites In Firefox ?
Feb 7, 2011i hv installed firefox 3.6 in fedora 14. From 2 days i m not be able to open some of the sites in firefox like warez-bb, addon.firefox, etc.
View 1 Replies View RelatedUbuntu Security :: Some Sites Blocked - Accessing Some Sites - Amazon Paypal And Bigstockphoto Really Slow
Feb 9, 2011In the past week or so I've noticed some weird network behaviour. I find accessing some sites such as Amazon, Paypal, and Bigstockphoto really slow. Sometimes the page will not load at all. Other sites are fine. The problem sites are not a problem for others on my LAN at home. When I try to open the problem sites, I can see in Firestarter blocked connections coming from 2.1(8/9).xxx.xxx on various ports such as 36007. This only happens for the problem sites. I attached a typical output from firestarter.
This happens with Firfeox or Chrome. Using Ubuntu 10.10
Ubuntu Networking :: Unable To Use Facebook Chat And Several Other Sites
Jun 18, 2011i have a dual boot PC with Linux and windows 7. I have observed that facebook chat doesn't work properly when i use linux. and some sites dont open quickly or dont open at all.But there is no such problem in windows. What to do?
View 9 Replies View RelatedUbuntu Networking :: In VMWare - Unable To Connect To External Sites
Apr 12, 2010Have just installed Ubuntu 9.10 in Vmware workstation 6.5.1 and unable to connect to external sites, or servers (using NAT). I can ping on host name and IP but can't resolve either host or IP in browser (Receive message the connection has timed out). I can't ping the host (Windows 7 Professional) IP from the guest and vice versa. I use a mobile wireless network card, and my Windows operating systems work successfully in vmware. Currently in my VMNet8 properties I just have Obtain IP address and DNS Automatically (same as host).
View 3 Replies View RelatedUbuntu Networking :: Unable To Access Some Sites Via Ethernet Connection
Sep 13, 2010Unable to access our site via eth0. Can access the same site, via same ISP on wireless laptop, or via eth0, but using ip annonymizer service. Have a feel that it could be something obvious, but after digging through Modems firmware I am running out of ideas
View 3 Replies View RelatedUbuntu :: Unable To Find Bits And Pieces Of Info On Different Sites
Oct 18, 2010I was wondering if there's any resource that explains how to use w3m. I checked the man page but this just lists the startup options. I also did some google searches but couldn't find anything useful. I was able to find bits and pieces of info on different sites (e.g. how to enter a URL, how to go back a page, etc.) but there was no site that had all this sort of information in one place.
View 1 Replies View RelatedDebian :: Apt-get Error HTTPS In Line Commands
Jun 29, 2015I have installed debian 8 on acer aspire one, all run well but when i do the Command's VT320, i have errors with HTTPS protocol ! Since the browser Iceweasel, the connexion of web sites HTTPS work well ! This is the sample of "apt-get" with google Chrome :
Code: Select allroot@sta-krups:/home/phipo# apt-get install chromium
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Paquets suggérés :
chromium-l10n chromium-inspector
[Code] ....
I have checked if the problem is with Openssl, the server is installed, and work well.
Debian :: Provide Encryption Over HTTPS Without A Certificate?
Jul 17, 2011Is it possible to provide encryption over HTTPS without a certificate?
I can't afford a certificate from a CA, but I do want to provide encryption with my website... without a self-signed certificate because I hate that screen popping up on the clients computer on first visits.
Debian :: Forwarding TCP Packets - Redirect Also The Port 443 (HTTPS)
Mar 16, 2011This is where it starts: I have 2 networks. The first: 192.168.1.0/24 composed by the router which has access to the internet with the IP 192.168.1 and the server (who is a gateway) with the IP 192.168.1.42 The other network: 192.168.2.0/24 composed by the gateway with the IP 192.168.2.1 and the clients (on the 192.168.2.0/24 subnet). To sum up, the gateway has 2 IPs (192.168.1.4(eth0) and 192.168.2.1(eth1)). On this gateway, I have squid installed (and listening on port 3128). I also made a redirection to redirect some computers who want to access to the web (port 80) to squid (port 3128) with this command: /sbin/iptables -t nat -A PREROUTING -m mac --mac-source CLIENT_MAC -p tcp -m tcp --dport 80 -j REDIRECT --to-port 3128
At this stage, everything works fine. The clients can access the web by the proxy without "knowing". What I wanted to do, is redirect also the port 443 (HTTPS). Actually, when a client wants to access to, for example, [URL]. He cannot. So I would want to be able to redirect people (without passing by any proxy) directly to google. Like a NAT. But the problem is that I can't. The thing would be to, in the gateway, take all the packets with port 443 in destination and handle them to the router 192.168.1.1. Then, when the router sends the packet back, the gateway takes the packet and handles it to the client. I tried putting ip_forward to 1, but the problem is that all IPs and ALL PORTS are forwarded. And I just want port 443 to be forwarded.
Debian Configuration :: Squid Transparent Proxy Https 443 Port?
Apr 26, 2011I'm trying to get https/443 traffic go through squid.
View 3 Replies View RelatedDebian :: Strange Link Gets Me To Different Sites?
Apr 19, 2010Trying again here.. no-one on reddit seems to respond..It initially happened here (it was deleted, you can try the lower links.) Sometimes one, sometimes both of these links gets me to 'attack sites', it starts with both, then to one, and then neither does it. I am on Debian Lenny, Both Iceweasel 3.0.6-3(firefox), epiphany2.22.3-9, elinks0.11.4-3 and firefox 3.6.3 sometimes do this for me. It doesn't seem to happen if you enter it into the adress bar, but it does when you follow it by clicking.[URL]..Someone else reported it too, from XP w/ Firefox. The adress bar tells me it is subreddits.org the but the screen doesn't. (Worry my computer is compromised..)
Links it send me too, something on 89.248.174.24, orcug.com, thindx46td.xorg.pl and a whole range of varying other sites. http://i.imgur.com/d7ZGv.png So can you reproduce/any idea what this could be? I do worry about having some malware on firefox and such, also besides this, but as i said, it happens with other browsers. I have add-on flashblock, noscript, redditreveal, socialite, trackmenot, had tree style tab until i found it wasn't usefull enough. I also noticed that control+k gets me to bol.com (wtf is up with that??), and there was the random site you get to when you misclick.(Which i was able to disable.) I am gradually getting more and more pissed off and suspicious about firefox. (as on my computer.)
Firefox also seems start reading/writing from disk suddenly. (I use iotop when i think it shouldn't be writing sometimes.) Perhaps i should try set something up to record what writes to disk.
Debian Configuration :: Both HTTP And HTTPS On Same Server? (Apache Virtual Hosts)
Oct 30, 2015How to best manage both http and https pages on the same apache-server without conflicts. For example, if i have both 000-default.conf and 000-default-ssl.conf pointing to mydomain.com, and don't want users who visit mydomain.com without specifically type the https-prefix to be redirected to the https-page - how to handle users using browserplugins such as https-everywhere etc?
Another option would be to create a subdomain ssl.mudomain.com and have users who want to reach the ssl site to have to type ssl. I have tested several things with https everywhere enabled in my own browser, and it seems really hard to make this working the way i want, in one way or another i always end up getting redirected to the ssl-site automatically.
The reason i need this to work is because i run one site that i don't care much about SSL, that is the "official" part of that site, and i also host some things for friends and family on the SSL-part. This would not have been a problem if it wasn't that i use self-signed certificates for my ssl-site and the major user become afraid when a certificate-warning pops up in their browser and therefor leave the site.
Ubuntu Installation :: "unable To Resolve Host" / Method Driver /usr/lib/apt/methods/https Could Not Be Found?
Jan 2, 2010I'm trying to use a flash drive to try to repair the Intrepid installation on my netbook.
when I drop to a terminal and try "sudo apt-get update" i get
Code:
sudo: unable to resolve host ubuntu
E: The method driver /usr/lib/apt/methods/https could not be found
E: The method driver /usr/lib/apt/methods/https could not be found
Debian :: Iceweasel Crashes In Some Flashplayer Sites
Dec 20, 2015in terminal, here is some different outputs after crashes:
Custom widget with id loop-button does not return a valid node
[NPAPI 8829] ###!!! ABORT: Aborting on channel error.: file /tmp/buildd/iceweasel-38.5.0esr/ipc/glue/MessageChannel.cpp, line 1584
[NPAPI 8829] ###!!! ABORT: Aborting on channel error.: file /tmp/buildd/iceweasel-38.5.0esr/ipc/glue/MessageChannel.cpp, line 1584
Falha de segmentação
[Code].....
Debian :: No Longer Connect To Many Sites - DNS Fails?
Oct 16, 2010I'm running squeeze/testing. Two or three days ago I became unable to get my mail from pop.gmx.net. A bit of investigation and I found that the error message I was getting was: "could not resolve pop.gmx.net: Name or service not known". Now the funny thing is that I can ping, traceroute, or nslookup the site successfully. Telnet, rlogin and ssh give the same: "could not resolve pop.gmx.net: Name or service not known" error message.
I have tried using the IP address instead of the pop.gmx.net and everything works fine. There is no issue with connecting to pop.gmail.com on the same port. Obviously there is some cache somewhere with a messed up pop.gmx.net. Any idea as to how I can track this down?
Server :: Manage Files And Sites With Debian System
Feb 1, 2011I have a linux server with debian system. I want to put in my debian server a site. I installed apache php mysql and phpmyadmim. I really thought that was more difficult for me to put my site database. But now i can load on server my database with phpmyadmin after a very simply installation. I could not believe. I'm studying how make ftp work (apt-get site-ftp?) and waiting from my host directadmin installed. But i try to manage linux console and was very exciting for a newbiest like me!
Now I can write text on my site server with echo etc,etc, I have a database, but I have not site files. While I was studying tutorial to make apache work, I frequently read the directory /var/www and my debian console confirm that is an existing directory. How can use this directory?
Any listing debian linux server commands to:
copy, delete, paste from my pc desktop a file TO folder /var/www ?
It is possible without ftp? Another question. Which bad errors can make a newbie like me configuring apache with linux? I ask this because I read all where that I could not manage a server system if I'm not a sysadmin, but I have only to put in a site... what the real risk?
Fedora Networking :: Connected To Router - Can't Load Sites - Can Load Sites In XP ?
Jan 14, 2011I dual boot XP and FC14 and have 2 routers. I can connect and ping one of these routers when I'm in FC and I have an IP address I just can't load any websites. When I connect to the other router (my main router) it works fine. When I boot into XP and connect to the problem router I can load pages fine. It's only when I'm on FC14 and connect to the problem router that I can't load pages even though I have an IP and can ping around.
View 1 Replies View Related