I am trying to configure test site with https mod_ssl for a few days with no success.
Now I got this message:
And this is second day I can't move on. I try to config https site on my localhost in order to test functionality and etc.
I get this as output in curl
Code:
I am getting this error message in Cinelerra when I try to load up any footage - virtual int FileMOV::read_frame(VFrame*): quicktime_read_frame/quicktime_decode_video failed, result:
Have previously run Cinelerra happily on other Ubuntu installations. I am using 10.04. Am I missing some dependency?
I would like to download and show a source of an webpage in stdout, but this is a https page with authentication form, which requires logging in. I tried like this:
Code:
wget -q --no-check-certificate --http-user=USERNAME --http-password=PASSWORD https://webpage.domain.com -O - However, it still downloaded only this login page, not the real webpage. Using the Firefox I can authenticate just fine. Any ideas?
My SSL is not working, I get the error I just moved my site off GoDaddy, and on to my own server. I now get this error message. "SSL received a record that exceeded the maximum permissible length. (Error code: ssl_error_rx_record_too_long)"
I'm not sure what that means, or how to fix it. I used these same Security Certificates om my other server, and they worked just fine.
I want to load grub2 from grub4dos.I want to load directly the grub2 core. I know how to load first 512 bytes from some patition by chainloader and load grub2, but what I need is to load directly grub2 core without passing by bootstriping code (first 512 bytes).So, my first boot manager is grub4dos, then I can load grub2 and later I load Ubuntu. But I think I have to edit --set-root
What I dont know is how.
In hdd 0,7 (sda8) I have Ubuntu 10.10 and /boot/grub/core.img is in sda8 (hd0.7)
I tried this way:
Code:
title grub2
find --set-root /boot/grub/core.img
kernel /boot/grub/core.img
We could not access our web site page on firefox or chrome or ie:
Firefox give us these error:
We also try on linux with wget to access it:
Here is the result:
Recently I got a very rare database issue, it says: Error: Couldn't read status information for table clients_copy () mysqldump: Couldn't execute 'show create table `clients_copy`': Table 'adm_retail.clients_copy' doesn't exist (1146) Error: Couldn't read status information for table dt_mx_emp ()
[Code]...
I have set up certain portions of my web site to be forced https:// How do I force, non https:// protocols. I know this sounds confusing, so let me give you an example.
[Code]...
I have issue with lwp. A https get request returns 400 error. How ever I am able to get 200 response using a browser. I am not using any proxy.
View 1 Replies View RelatedI am using the curl version 7.21.0. When I try the curl command from command like, things works fine for the http sites. But when I try https I get certificate error. I have source compiled curl with latest OpenSSL. I have also tried downloading the latest certificate bundle. With the same version of curl, same version of openssl with same certificate file I can get it work on the linux. But in the QNX OS I get this error.
./curl --cacert /mnt/temp/curl-ca-bundle.crt -v https://www.paypal.com
* About to connect() to proxy 172.16.2.17 port 8080 (#0)
* Trying 172.16.2.17... connected
[code]...
I have a debian box running Apache2 and PHP5.2.6 lenny.
When a request is made via https, php displays the content fine. If the request is made over HTTP the file is offered for download, rather than displaying it.
I know its probably something trivial but I've never seen this issue.
The plot thickens, I can display PHP over HTTP in some directories but not others (which offer the file for download)?
I have installed debian 8 on acer aspire one, all run well but when i do the Command's VT320, i have errors with HTTPS protocol ! Since the browser Iceweasel, the connexion of web sites HTTPS work well ! This is the sample of "apt-get" with google Chrome :
Code: Select allroot@sta-krups:/home/phipo# apt-get install chromium
Lecture des listes de paquets... Fait
Construction de l'arbre des dépendances
Lecture des informations d'état... Fait
Paquets suggérés :
chromium-l10n chromium-inspector
[Code] ....
I have checked if the problem is with Openssl, the server is installed, and work well.
If I have a hard-disk with Ubuntu fully installed on it and I want to - all of a sudden - use Windows XP, is it mandatory that I firstly format the hard-disk first? So far, I have used two versions of Windows XP; one of them is from a few years before the other. Both copies of Windows XP when in start-up from booting from CD are causing errors. One of them is a BSOD error (0x0000007B) and the next Windows CD is stopping and giving me an error with setupdd.sys (error code 4). Is it required that the hard-disk is formatted before you even put a Windows boot CD in?
View 2 Replies View RelatedWikipedia won't load! It keeps returning code 200 (ok) along with 0 bytes of source...
View 2 Replies View RelatedWe have a apache server which have a ssl certificate like www.abc.com. We hosting a website is a online giving shop which need ssl cetificate in https. website of this is www.123.com, it will redirect tow this website owner don't want to show What can I do to achieve this ? Can I use rewrite function in apache to achieve this? How? or we need to buy any other ssl certificate for www.123.com? How can I install multiple sslcertificate in one apache server?
View 4 Replies View RelatedI have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,
$ /etc/init.d/httpd start
then this
$ /etc/init.d/httpd graceful
[code]....
How to start https on FC10?[root@smartgateway conf]# openssl versionOpenSSL 0.9.8g 19 Oct 2007
View 1 Replies View RelatedI want to ENABLE SSL on a PORT 2222 :
Now this works fine. But I also want the HTTP URL to work and redirect it to HTTPS.
When I visit http://IP:2222 I get :
Quote:
Bad Request
Your browser sent a request that this server could not understand.
Reason: You're speaking plain HTTP to an SSL-enabled server port.
Instead use the HTTPS scheme to access this URL, please.
Hint: [url]
How should I make this request of [url] CT to [url]
I'm using a box running CentOS 5.5 powered with Apache2. In this machine I hosted several domains and sub domains, managed by Apache's virtual host.
Due to security issue, one sub domain needs to be able to be accessed either using http or https.
My question is: Is it possible to set a sub domain to be able to be reached using both http and https? If it's possible, how to make it happens?
Is it possible to pickup the whole https URI with a sniffer?
IE. [url]
For example, Is there a way to get the sniffer to pick up id=39238?
I have been testing with wireshark, and it only seems to be picking up domain.com.
I'm installing Liferay as a WAR on Tomcat 6 on a new Ubuntu server.I want my portal accessible only via HTTPS, that's why I've enabled it via Apache.My config :Apache 2 (/etc/apache2/sites-enabled/001-https)
Code:
<VirtualHost my.domain.com:443>
ServerAdmin admin@domain.com
[code]....
I have a centos server (5.3). I installed WebMin to assist with some of the administration details. In any event, I got it installed but I cannot access it (it requires a secure connection).
I checked out the server and it does not respond to a HTTPS:// request. When I telnet into port 80, it responds but it does not respond on port 443. MOD_SSL is installed and there is an ssl.conf (unmodified).
I am trying to build an Net-SSLay package for my Slackware, it is required by webmin to support https.
When I start the Slackbuild script I get this error:
Quote:
What can be done to make this work? Or is there any better way to make webmin working with https?
My OS is Slackware 13_64 and webmin is 1.510 (the latest version).
i'm attemping to re-route incoming traffic of https to one of my servers. (a windows xp with subversion on it)
problem is if i do that ALL https traffic from other pc's is stopped. meaning i can't get any reply from any url with https;
I am trying to configure local https server but I get this message: "ssl_error_handshake_failure_alert"
I configured my apache and make cert and key files from this article, following section 1B: [url]
I try to add server.crt and ca.crt files in firefox, but it didn't help. I googled and didn't find any information. I try also with 1024bit key.
I am running Ubuntu 10.4 with Apache2, SVN and SSL. Both HTTP and HTTPS are working correctly with my website. Although the SVN setup I have is not working. This configuration gives me a 403 error.
Code:
<Location /svn>
DAV svn
SVNParentPath /srv/svn/repos
SVNListParentPath On
[Code]...
This issue is driving me up the walls. If there is any additional information, I will be more than happy to provide it.
For some reason I was trialing a SUSE 11.1 SP1 version for a while and somehow I have NO clue it attempted to change itself to a OpenSUSE 11.1 System. I have no clue what I did, please don't ask Now though I have been successful in turning into an OpenSUSE 11.2 system by changing the repositories to OpenSUSE 11.2, doing a "zypper refresh", "Zypper in Zypper", "Zypper dup -d", "Zypper dup". I also did a repair and refreshed the base packages with an OpenSUSE 11.2 DVD and that seemed to help also. The only thing it seems I can get right is that yast/yast2 give me this error: Download failed: Failed to download ./repo/repoindex.xml from https://nu.novell.com/?cookies=0&cre...NCCcredentials
[Code]...
A while back, I put a site up under a LAMP setup, and followed a guide from ubuntuforums that I googled to set up SSL encryption for the site.
That site works great, but since then, I've added some other sites to the same LAMP server. They load fine as well, but if I type in https:// before going to the latter sites, the browser attempts to redirect to the first, and warns that it is a fraudulent certificate, and that I'm at risk by going to the site.
Obviously, it isn't an attack site, the certificate is just set up for only one domain. How do I prevent my non-SSL sites from redirecting to the SSL-encrypted site?
My Problem is: I want to stop gmail access without blocking https. Yes in my squid proxy normal [URL].. is not accessible. But gmail recently started https service by which user can still get access to gmail. I DONT WANT TO STOP https CAUSE ITS BEING USING BY OTHER PROGRAMS.
View 1 Replies View RelatedWe have 2 HTTP Load balancer with HAproxy and heartbeat. There are 4 nodes in this cluster. It's doing round robin load balancing. The HTTP cluster working fine. We are having problem with our portal because it uses SSO. We need sticky connection support in our HAproxy. Also we need load balancing for HTTPS traffic. Here's our HAproxy conf file.
[Code]....