Debian Hardware :: BCM5700 Not Working For Netinstall
Apr 14, 2015
I figured I'd rather do a netinstall for Debian, but it cannot find my network card. This has been the issue for Ubuntu as well. I did find this, but I haven't installed Debian yet: [URL] .... Not to mention it's 5 years old, and the links are obviously dead. I'm somewhat inexperienced with Linux in general, and I've searched for incorporating driver modules into the install but couldn't figure it out.
Where can I find the driver, and how can I incorporate it into the install? I wanted to do the netinstall to have Debian as minimal as possible.
I downloaded and installed the debian 8 ppc netinstall on my powerbook G4. upon the option of which desktop environment I wanted, I de-selected debian desktop environment (I only selected printer and utilities.) After finishing the install I am prompted with terminal. I logged in and did the following:
Code: Select allnano /etc/apt/sources.list
to include
Code: Select alldeb http://ftp.us.debian.org/debian jessie main contrib non-free deb-src http://ftp.us.debian.org/debian jessie main contrib non-free deb http://security.debian.org/ jessie/updates main contrib non-free deb-src http://security.debian.org/ jessie/updates main contrib non-free
I'm not sure of what is going on here, I might be missing something obvious, but anyway my fresh netinstall of Testing doesn't boot without the USB stick that I installed from plugged in. When USB plugged in it boots without problems.
Every single theme has at least one or more broken UI element. In Arc, I'm missing highlighting in the context menu, and in Numix, some application's backgrounds are just completely black. All of these themes don't give me a urlbar. I'm also missing a lot of boxes. There is no box around the word "submit" in reddit, and neither around "cancel". If you go into the search bar, I'm missing the checkbox for "limit my search to /r/...". I know these themes work, because I had them working in my last install of Debian. Except, last time I used the XFCE iso instead of the netinst. Even default themes, like Raleigh, are not working correctly. I installed all the necessary packages like the gtk2 murrine engine, but if the default themes aren't working then something is definitely missing.
I would really like to try and do a Netinstall on my laptop with it. I know I could just download the CD's/a DVD, but I would rather customize it for my laptop, and I've heard that's the fastest way. The problem is that I have to compile the drivers for both my wireless and my wired internet. I have guides to compile both the wireless [URL] and wired [URL] internet. I was wondering if there was a way to compile these drivers in a Netinstall (preferably the wireless, but wired if necessary)?
I am trying to install Squeeze on a HP mini netbook. I have been trying to make a USB to netinstall Squeeze and cannot get it right. I cannot get past the message SYSLINUX 4.02 debian-2010.............. on booting.
I have tried to make the netinstall usb from this [URL] dInstaller I am also trying to understand this [URL] I have also tried using Unetbootin. Nothing works so far. Some simple steps to make a workable USB.
I have internet connection - you need to open a browser & in the login screen enter your user name & password to get connected. The connection is via a ethernet cable. I have the netinstall cd for debian testing. How to connect to internet & get debian testing installed.
When I netinstall debian squeeze an asus netbook using using Unetbootin usb stick, at the end I am asked if I want to install grub on MBR. I agree, yes, but on booting I find that the netbook has not grub. I go back to usb stick that stole my grub and I use it to boot. I go to sunaptic and install grub, still nothing, the netbook won't boot without the usb stick.
I'm hoping to install XFCE 4.8 after a fresh install of Debian via the netinstall. Do I just change the source.list file to point to testing and then install xfce4?
I installed Squeeze on a server today, and struggled a bit because the network card needed non-free firmware (Broadcom something). The server had no floppy, so I had to go and get a pen drive and put firmware from non-free on it to get it to work.
I agree on the political issues on this, but sometimes it's non-free or nothing.
So I was wondering if someone know of a patched netinstall, or know how to make one? Then I could give the pen drive away to something more useful that keeping non-free firmware. Warnings and questions about the non-free would also be nice.
I just kickstarted this box - I used eth0 and had no issues. After booting - eth0 is not available/present. This was not an issue in 5.2. This is a dell 4600 - both the 100mb intel and gig broadcom are onboard. I am about to try a different kernel. This is not a show stopper - it's plugged into 100m switch and I can just use eth1 - but I am curious as to what is different and why this no longer works.
I tried to do Debian netinstall from minimum iso image in my brother's pc. My Network Interface card is Intel 82578DC GIGABYTE Network Connection. The installer gives a list of drivers to install but I don't know what to do. Should I download and install from first CD/DVD? Will it have appropriate drivers then?
I installed the Squeeze with CD-ROM netinstall. My /home is in /dev/hda6, reiserfs format, and I want to preserve it, I didn't make backup, and there is not the reiserfs option in the partition editor of the netinstall, so that it would be formated the home, otherwise it is not used as home, and I can not even mount it. I try to edit /etc/fstab with the UUID of the device hda6 as home. I have just found reiserfs in http://packages.deb.at/squeeze/i386/rei ... i/download.
i'm trying to intall an old etch debian release using the netinstall netinstall debian-40r9-i386-netinst.iso. But i've got an issue while configuring the miror. Here where i'm blocked (it seems my archive miror is not right but why ?): in the previous screen, i entered the right path (i think): and as you can see in my screen cap of the broswer, the website of the archive is right, so where am i go wrong ?:
It seems as though every time that I want to grab a multi-arch, netinstall ISO from the site (not very often) I have an insane amount of trouble navigating the site and finding what I want. I mean there's no freaking "downloads" section that is split into testing and stable with links to the mirrors and such. I want to grab a multi-arch netinstall of both Lenny 5.0.5 and the latest, frozen Squeeze. I cannot find either. In other words, I'd have to burn six CDs instead of two. Not happening. Can somebody point me to the images that I am seeking?
I am trying to install 5.3 using net install disc, where it hangs for over 30 minutes trying to retrieve stage2.img. Second time. After first time and waiting over 25 minutes, I tried Debian net install on another box, and it's done with installation long ago, while this one is still hanging (and from the looks of it I doubt it will continue).
1. Network is good, the box pings, network parameters are good, Debian worked flawlessly with same parameters
2. It did pull all it needed before stage2.img
3. Plenty of RAM in the box, over 3 GB
4. The box needs no additional drivers (except newer version of kernel as vanilla still doesn't have a complete support for Intel DP43TF board), distro has them all
will it be possible to upgrade F11 to F12 using the netinstall iso? I saw some people got problems when trying to upgrade from F10 to F11 with the netinstall iso: [URL]
What is the difference between "bin" and "netinstall" ISO files for Linux?I need a full OS, not just a Live CD. On the mirrors there are two kind of files.Which one is the full OS?
I have been trying to perform a netinstall (of Debian). Will the WPA encryption on my wireless network prevent (or at least make difficult) the netinstall? Will I need to have the WPA password handy or even to temporarily remove the encryption?I haven't actually run into this problem yet; what I was dealing with on the last attempt, before I decided to finish the netinstall later and went back to my working Linux system (I got impatient with being stuck outside it), was that the netinstall couldn't detect my network by DHCP, and wanted me to enter an IP address. I don't suppose that would be any more difficult than going to the host computer and writing down its IP address, but thinking ahead, I wondered whether the WPA encryption would pose another problem.I didn't really think about these issues when deciuding to try a netinstall: whether my internet connection would work. I mean, if it doesn't, trying to netinstall is a waste of time.
I want to install a OpenSuSE 11.2 in a no optical drive station. Obviously I have done a pendrive installation (following the steps in Live USB stick - openSUSE). Using Live images it works very well. But with the net install image, when I boot the station, nothing happen and it passes directly to the second boot device
I am trying to install openSUSE 11.3 on a Dell Dimension XPS D233. When the system loads the install after the second of six pieces it always locks up and the Caps Lock and Scroll Lock start flashing. This in my experience as a IT Specialist means a kernel panic has occurred. Does anyone know of the way to correct and/or bypass this issue?
What is the difference between the boot.iso and netinstall.iso images? I've looked at the wiki and done some Googling, but haven't found a good answer yet. I know it is probably going to be something obvious, but in the context of installing a Xen fully virtualised guest there doesn't seem to be much difference. After booting both ask for the location of the install tree and proceed happily.
My ISP has a bad habit of killing nearly all sustained FTP transfers (reset packet to my router and the remote host) and I need to install CentOS 5.5 on an older pc that doesn't have a DVD drive. My solution would be to (temporarily) turn on IIS on my laptop and extract the contents of the DVD to the ftp dir, but do I simply just drop everything in there with the same directory structure as the DVD or is there a particular way I should set up the directories?
I have finally decided to bite the bullet and upgrade my current Linux system from Fedora Core 2 to Fedora 15. When checking the download page and from reading another thread there is apparently no isos' available for an set of install CDs. An iso is only available for DVD. Since my machine does not have a DVD drive that is obviously not an option. In the past I have only installed from a set CDs and I'm not sure which install method is the best to use. I do have a DSL internet connection and will probably need to increase my partitions sizes. Which install method do you recommend and why?
I like Arch so far. The first time I installed Arch, everything went fine. I had a good openbox/SLIM configuration, but for some reason I just got a black screen w/ a mouse that didn't move whenever I tried to use the radeon driver (which works with my card). Anyways, I uninstalled Arch and reinstalled Fedora, but after my second attempt to install Arch (I have nothing better to do), arch suddenly wouldn't boot at all after a netinstall. Doing a core install went fine, but when I tried to update it and reboot, the same thing happened as the netinstall: The screen goes on standby and the CPU is spiked at %100 (I know this because my fan goes to full speed when the CPU jumps up too high - long story).
Not even doing that Skinny Elephants trick worked, so I'm guessing it was a complete kernel panic. I don't exactly know how to check for logs when the system is unbootable, but in retrospect I coulda just booted into a livecd. I just looked in /var/log of a recent Arch install on this computer, and there doesn't seem to be anything there. A file called 'lastlog', but I'm not sure it's anything. I can't open it with gedit or cat, so I'm assuming it's a garbage file. Adding 'nomodprobe' into menu.lst in Arch allowed it to boot, but I could only use the vesa driver with Xorg (using radeon caused a black screen showing only a cursor), which isn't ideal.
Using UNetBootin on Windows, I flashed a USB keydrive with the Ubuntu 10.04 Minimal CD and proceeded to boot up a brand new PC.
Problem is, after choosing Install, language/keyboard, and then a repository from which to download files, the installer just stops there. I tried two different repositories, to no avail. The network hardware is correctly detected and set through DHCP.
Has someone seen this? Should I use an other option?
After many hours trying to install Ubuntu(netinstall-64bit) i can not find any solution to get it working. I set-up via KVM and virtual device. Installation gives me error "No disk drive detected" when trying to detect discs/hardware. Someone told me i have to load megasr-source_13.13.1021.2009-1_all.deb by virtual-usb. It should include drivers for the controller not delivered by ubuntu-setup. After that I got to next setup-step partitioning, but it only shows me an IPMI-device which is either the virtual usb or cd i suppose.
System is one week old and I got it with pre-installed debian64bit which is working fine. So i dont think its hardware causing this.
