Debian Multimedia :: Alsa Just Returns With Device Or Resource Busy

Mar 31, 2015

Using debian testing.

Pulseaudio got installed by default here during installtion. Since I don't want it I first ran "systemctl disable pulseaudio", "pulseaudio --kill", then without rebooting I use mpd with alsa alone and it worked fine.

But then i rebooted, and now all applications, mpd, mpv, chromium etc just says that alsa returns with "Device or resource busy", tried rebooting again with no effect.

The soundcard appears as card 1 according to the output of "aplay -l", and defined that card 1is suposed to be default with this in "/etc/asound.conf":

Code: Select allpcm.!default {
    type hw
    card 1
}

ctl.!default {
    type hw
    card 1
}

It occurred to me that there might be an issue with permissions to the soundcard so I ran "ls -l /dev/snd"

Code: Select alldrwxr-xr-x  2 root root       80 Mar 31 03:27 by-path
crw-rw----+ 1 root audio 116,  8 Mar 31 03:27 controlC0
crw-rw----+ 1 root audio 116,  2 Mar 31 03:27 controlC1
crw-rw----+ 1 root audio 116, 12 Mar 31 03:27 hwC0D0
crw-rw----+ 1 root audio 116,  7 Mar 31 03:27 hwC1D0

[Code] ....

My user is a part of the audio group:

Code: Select alluid=1000(roberth) gid=1000(roberth) groups=1000(roberth),24(cdrom),25(floppy),29(audio),30(dip),44(video),46(plugdev),108(netdev),111(scanner)

As far as I can tell, that looks fine unless I am missing something?

View 1 Replies


ADVERTISEMENT

Ubuntu Multimedia :: Unable To Open Device /dev/dsp - Device Or Resource Busy

Apr 13, 2010

All my music editing software programs say, "unable to open device /dev/dsp.Device or resource busy." How can I fix this?

View 3 Replies View Related

Debian Installation :: Mount Root Filesystem Failed: Device Or Resource Busy

Jun 16, 2010

I've upgraded my squeeze box to linux kernel 2.6.32-5. But it shows mounting "here is the uuid of / " on /root failed: Device or resource busy while booting.Here is the menuentry of linux kernel 2.6.32-5.

[code]....

View 9 Replies View Related

Ubuntu :: Mdadm: Cannot Open Device /dev/sdb1: Device Or Resource Busy

Jun 11, 2011

I rebooted my server and out of nowhere the RAID5 array won't assemble. I've tried everything I could think of to reassemble the thing. I fear that the array is ruined, but I can't imagine how. Here are various bits of information: The simplest failure (with and without partition numbers, which have not been needed in the past):

Code:

richard@nas:~$ sudo mdadm --assemble --verbose /dev/md0 /dev/sd[bcd]
mdadm: looking for devices for /dev/md0
mdadm: cannot open device /dev/sdb: Device or resource busy

[code]...

View 5 Replies View Related

Hardware :: Device Or Resource Busy ?

Jan 16, 2010

I am trying to set up a mdadm raid in a new machine that I am building as a home theatre PC. the machine boot just fine from /dev/sdc running ubuntu 9.10 However in gparted /dev/sda and dev/sdb show to be part of /devmapper/sil_ajbicfacbaej

Both dev/sda and /dev/sdb were drives that used to be part of a sil hardware raid on a previous machine. I would like to use them as a new mdadm raid on this new machine the old hardware card was really quite slow. the drives are now pluged into the MB and should be much faster there.

fdisk -l shows this

It produces no errors but does not remove it.

View 1 Replies View Related

Debian :: Debian 5 Mdadm "device Or Resource Busy" Raid?

Dec 26, 2010

I installed mdadm fine and all and proceeded to run:mdadm --create --verbose /dev/md0 --level=stripe --raid-devices=2 /dev/sda /dev/sdbWith sda being my primary hard drive, and sdb being the secondary.I get this error message upon running the command"mdadm: chunk size defaults to 64Kmdadm: Cannot open /dev/sda: Device or resource busymdadm: create aborted"I don't know what's wrong!

mdstat says:
"Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath] [faulty]
unused devices: <none>"

View 1 Replies View Related

Ubuntu :: Fsck On Busy Device Or Resource

Apr 4, 2011

I am dual-booting my Gateway laptop with Windows XP Media center Ed. and Ubuntu Notebook 10.10. Several weeks ago I was in the midst of downloading a program from the software center and my system starts running slow (this is in the Ubuntu kernel, not the Windows OS). So I decided to cold-boot the laptop in mid-download. When it boots back up, I get dropped to a grub-rescue menu that states the following:

Code:

Now, the only way I can even remotely use my laptop at the moment is to use my Live USB with the corresponding version of Ubuntu Netbook 10.10 or the Live CD I made with Ubuntu 10.04 on it (I'll explain why I made this below).

I read somewhere that I need to run fsck on my device to try to fix the partition, which btw my Ubuntu partition on my device is /dev/sda5, and before someone suggests it, I even tried using GParted and it doesn't work.

The reason I made a 10.04 CD is because I read somewhere that using the fsck from 10.04 might be more effective (for whatever reason) than the 10.10 fsck version.

I'd also like to add that I'm incapable of booting onto my Windows OS at all, yet I can access the partition from my Live CD/USB. the Ubuntu partition however, I can neither access or mount.

I tried running fsck on the entire device partition table, and I get the following:

Code:

This is me running fsck from the 10.04 version, I get a similar msg from the 10.10 Live USB but replace fsck.ext2 with fsck.ext4 in the message.

View 9 Replies View Related

Fedora :: XFS Mount Failed - Device Or Resource Busy

Sep 8, 2011

After upgrading to fedora 15, I have problems mounting XFS filesystem.

The short tale:
Code:
08:01:38 localhost root>mount -t xfs -vv /dev/sdb1 /data/disks/old
mount: /dev/sdb1 already mounted or /data/disks/old busy
08:01:39 localhost root>fuser /data/disks/old
08:01:41 localhost root>lsof /data/disks/old
08:01:44 localhost root>xfs_repair -t 1 /dev/sdb1
xfs_repair: cannot open /dev/sdb1: Device or resource busy
08:01:48 localhost root>fuser -mu /dev/sdb1
08:02:08 localhost root>dmesg | tail -n 5
[1655779.759764] SGI XFS Quota Management subsystem
[1659275.905756] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[1659275.908745] SGI XFS Quota Management subsystem
[1659389.154986] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[1659389.156519] SGI XFS Quota Management subsystem

Device is not mounted, and directory is not in use, it has just been created. There is nothing in log files that could remotely point the cause. After removing device (echo 1 > /sys/block/sdb/device/delete) and reattaching it, disk started working.

View 2 Replies View Related

Ubuntu :: E2fsck Fails Device Or Resource Busy

Mar 3, 2011

My son's netbook with 10.10 netbook remix failed to boot. Using the Live install CD and Gparted I couldn't repair the EXT4 filesytem. The error reported was:

e2fsck : Device or resource busy while trying to open ...

After trying many solutions and web searching I decided to try a different live CD and tried Knoppix 6.4.4

Using the command interface I typed e2fsck -v -f -y /dev/xxxx (xxxx = your device). This worked first time and the machine rebooted without hesitation.

View 1 Replies View Related

Ubuntu Installation :: Cannot Create Partition: Device Or Resource Busy

May 11, 2010

When installing I am selecting the manual partitioning scheme( I have arch on another partition). After I have selected my custom partitions and their mount points it starts the installation but almost immediately it gives the error message that it cannot create a partition on the specified one, as it is used by the OS. I have also tried to create partitions through gparted in the live session but to no avail. I am sure that no partitions are mounted or in use by the system, I have checked this using the mount and fuser commands. I also tried the oem installation but the result the same.

View 3 Replies View Related

CentOS 5 :: Mdadm: Cannot Open /dev/sda2: Device Or Resource Busy

Dec 5, 2010

Trying to complete a RAID 1 mirror on a running system and have run into a wall at the last part. I can't add the active physical disk to the mirror. This is on a Centos 5.6 x86_64 system. Anybody know where to go from here? I've tried adding the nodmraid line to the kernel boot line with no luck. Tried removing the logical volumes from LVM, but it won't let me. Not a Linux newbie, but haven't set up a RAID in a long time.

[root@blackbox-0-2-e3-23-72-c5 ~]# mdadm /dev/md1 --add /dev/sda2
mdadm: Cannot open /dev/sda2: Device or resource busy

Here's output from fdisk -l:

[root@blackbox-0-2-e3-23-72-c5 ~]# fdisk -l
Disk /dev/sda: 320.0 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders

[code]....

Here's mdadm.conf:

[root@blackbox-0-2-e3-23-72-c5 ~]# cat /etc/mdadm.conf
ARRAY /dev/md0 level=raid1 num-devices=2 UUID=3c6f7354:b9bfc86a:aa9d0dfb:cdd51bd8
ARRAY /dev/md1 level=raid1 num-devices=2 UUID=31ee55ba:be3b3606:974ac87d:627435a9

View 9 Replies View Related

Fedora Installation :: Error Creating Partition - Device Or Resource Busy

Jul 19, 2011

So I cant seem to be able to install fedora 15. I think it is the disk. I have windows 7 already installed (and would like to keep it) It was installed on the end of the hard drive leaving a 100 GB chunk in the center of the drive open and unformatted (this may be the problem). Anyway I used the live cd and tried to format the unformatted partition to exf but it gives me this error

Code:
Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sda, start=105906176, size=104752742400, type=EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
Entering MS-DOS parser (offset=0, size=500107862016)
MSDOS_MAGIC found
found partition type 0xee => protective MBR for GPT
Exiting MS-DOS parser
Entering EFI GPT parser
GPT magic found
partition_entry_lba=2
num_entries=128
size_of_entry=128
Leaving EFI GPT parser
EFI GPT partition table detected
containing partition table scheme = 3
got it
got disk
new partition
added partition start=105905664 size=512
committed to disk
Error doing BLKPG ioctl with BLKPG_ADD_PARTITION for partition 2 of size 105905664 at offset 512 on /dev/sda: Device or resource busy

Do I have to reinstall windows for this to work or is there something I can try to do.

View 2 Replies View Related

Ubuntu Servers :: RAID5 Failed - MDADM (Device Or Resource Busy)

Feb 2, 2010

Something weird happened last night and my raid5 failed. I am trying to re activate it and see if my data is dead or what. When I run mdadm -Asv /dev/md0 I get

Code:
mdadm: looking for devices for /dev/md0
mdadm: cannot open device /dev/dm-1: Device or resource busy
mdadm: /dev/dm-1 has wrong uuid.
mdadm: cannot open device /dev/dm-0: Device or resource busy
mdadm: /dev/dm-0 has wrong uuid.
mdadm: cannot open device /dev/sde2: Device or resource busy
mdadm: /dev/sde2 has wrong uuid.
mdadm: cannot open device /dev/sde1: Device or resource busy
mdadm: /dev/sde1 has wrong uuid.
mdadm: cannot open device /dev/sde: Device or resource busy
mdadm: /dev/sde has wrong uuid.
mdadm: cannot open device /dev/sdd: Device or resource busy
mdadm: /dev/sdd has wrong uuid.
mdadm: cannot open device /dev/sdc: Device or resource busy
mdadm: /dev/sdc has wrong uuid.
mdadm: cannot open device /dev/sdb: Device or resource busy
mdadm: /dev/sdb has wrong uuid.
mdadm: cannot open device /dev/sda: Device or resource busy
mdadm: /dev/sda has wrong uuid.

View 4 Replies View Related

Ubuntu :: Mdadm Device Or Resource Busy Using Drives From Old Hardware Raid?

Jan 16, 2010

I am trying to set up a mdadm raid in a new PC that I am building for home theatre. the machine boot just fine from /dev/sdc running ubuntu 9.10 However in gparted /dev/sda and dev/sdb show to be part of /devmapper/sil_ajbicfacbaej Both dev/sda and /dev/sdb were drives that used to be part of a sil hardware raid on a previous machine. I would like to use them as a new mdadm raid on this new machine the old hardware card was really quite slow. the drives are now pluged into the MB and should bw much faster there.

fdisk -l shows this
*********************************************** ~$ sudo fdisk -l
Disk /dev/sda: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders

[code]....

View 6 Replies View Related

Ubuntu :: Fatsort - Sort_fs: Device Or Resource Busy - Cannot Read Boot Sector Or Headers

Feb 14, 2011

I have an audio recorder that doubles as a music player. It can play WAV files. So I put in some WAV files and they are out of order, even if they are named numerically. Read somewhere about a little CLI software called fatsort so I installed. The device is located at /dev/sdc. So naturally I write fatsort /dev/sdc, it says something about permission. So sudo fatsort /dev/sdc. Thing is, it says:

Code: sort_fs: Device or resource busy! If I "eject" it (unmount) then it says something about cannot read boot sector or headers. On Windows there is FAT Sorter. It does not work in WINE. So every time I put something in, I have to get to a Windows computer to sort it. It seems like fatsort is the only program that sorts FAT systems in Ubuntu/Linux.

View 1 Replies View Related

OpenSUSE Hardware :: Mounting Encrypted Fs Error : Remove Ioctl Failed: Device Or Resource Busy

Dec 5, 2010

The error message I keep getting during mounting is:-

device-mapper: remove ioctl failed: Device or resource busy

This is from ane external USB HDD I use as a backup device. I've tried formatting it as ext4 ane encrypting it from the command line

# mkfs.ext4 /dev/sdc1
# cryptestup luksFormat /dev/sdc1

which run without errors but an attempt to mount throws up the above error as well as saying - you must specify the file type (tried that) - and fails to mount. I've tried using YaST to format and encrypt it which throws up the same error when I run mount but actually does actually mount the filesystem Googling around has brought up info saying that it's probably a race condition brought on by invalid udev rules. I've got a (mostly) working system and the udev rules documentation leaves more confused than when I started.

View 8 Replies View Related

Ubuntu :: Claim Interfaced Failed: Could Not Claim Interface 0: Device Or Resource Busy

Apr 10, 2011

I'm currently running Ubuntu Maverick - 2.6.32-30-generic. I recently bought a Garmin eTrex Vista H, which connects via usb (from my reading, it looks like older versions connected over serial). Well, like so many before me, I can't seem to write to or read from the device via gpsbabel.Originally tried to read anything from the device (I have one waypoint in there) via:

Code:

gpsbabel -i garmin -f usb:

It returned "Found no Garmin USB devices." I then tried turning on the eTrex. Doing the same while locating satellites just does nothing - I have to escape from the command in terminal. Trying again produces the error:

Quote:

Claim interfaced failed: could not claim interface 0: Device or resource busy

After doing some research, I unblacklisted and then reblacklisted garmin_gps. I also went into

Code:

/etc/udev/rules.d/51-garmin.rules

to verify that the contents were:

Quote:

SYSFS{idVendor}=="091e", SYSFS{idProduct}=="0003", MODE="666"

as directed in this . Everything seemed to be correct.I then followed some other advice found here and created the policy under /etc/hal/... Still no luck!

View 5 Replies View Related

Fedora :: Error "Device Or Resource Busy" When Trying To Suspend RAM

Mar 1, 2010

When I try to suspend to RAM my Fedora 12 system (2.6.31.12-174.2.22.fc12.x86_64), Screen goes blank for about 15 seconds, and then comes back as if nothing happened. I see the following error in /var/log/pm-suspend.log

[Code]....

View 2 Replies View Related

Server :: CIFS Mounted Multiple Times / Error "Device Or Resource Busy"?

Feb 10, 2011

I have a little problem with my RHEL5.5 IA64. I mounted a Windows directory with 'mount -t cifs'. After a little while someone else mounted the same windows directory in the same mountpoint. The output from 'mount -v' shows me that the same directory is mounted twice in the same mountpoints. I cannot unmount it, not even with the force option. The error is "Device or resource busy". There are no open files in the shared directory and no one using the directory or subdirectories.

View 6 Replies View Related

Debian Multimedia :: Change The Default ALSA Device?

Aug 24, 2010

I recently bought a logitech headset which is working very nice, the thing is that I cannot make it my default device when I plug it in. I edited /etc/modprobe.d/alsa-base.conf to make snd-usb-audio the default card but it only works when the computer is turned on with the headset plugged in. A workaround is to plug it and then "alsa force-reload" but I find it very ugly plus it kills all apps using audio and leaves the volume indicator unstable.

View 1 Replies View Related

Ubuntu Multimedia :: ALSA Mixer Returns To Default Settings On Restart

Dec 24, 2010

I notice that each time I boot my computer, under the playback section of the ALSA Mixer the 'Speaker' volume control is turned all the way down. Even when I return it to the proper level, and then restart my computer later, the slider for 'Speaker' seems to default back to the previous state mentioned above. Is there a way to set the default for the ALSA mixer in a .conf file of some sort so that the default setting for 'Speaker' is always at max?

View 4 Replies View Related

Ubuntu Multimedia :: ALSA Device Has A Broken Timer

Jun 4, 2011

I have a Lubuntu installed Netbook (Toshiba NB200). When I try to watch a video and listen to music smoothly. So I started the program Audacious on the terminal and I get the following Warning Message:

Code:

** WARNING **
Audacious has detected that your ALSA device has a broken timer. A workaround
is being used to prevent CPU overload. report this problem to your
Linux distributor or to the ALSA developers.
ALSA lib pcm.c:7316:(snd_pcm_recover) underrun occurred

[code]....

View 2 Replies View Related

Debian Hardware :: Monitoring A Second ALSA Device?

Jun 10, 2010

I'm trying to monitor (listen to) a second ALSA device on the default first card (#0). The device seems properly configured - for example, Audacity can select the device and record from it just fine; and when I select "Start Monitoring" in the volume level menu (the small triangle..), the volume level reacts to the captured stream. The only thing missing is the actual sound.

Before going any further, here are my specs; up-to-date Debian Squeeze on amd64 (x86_64), kernel 2.6.33.2.
Output of aplay -l:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: VT1828S Analog [VT1828S Analog]
Subdevices: 1/2

[Code]...

p.s. In case you feel inclined to tell me the command above should be just fine for me and not to waste my time with looking for an easier way; that only works when no other application has the default device (or the second device!) in its claws.
p.s.#2 : You probably noticed that the device is actually the third ALSA device. The real second device has no playback. I'm assuming this is no problem, since the same problem applies to that card.

View 4 Replies View Related

Ubuntu Multimedia :: Sound Device Missing After Oss Uninstall And Alsa Reinstall?

May 19, 2010

I was having issues with the mic or line in on my onboard sound card, while trying to get my tvtuner patched in, later I gave OSS a try, I could not get it to work and decided to go back to Alsa, now my soundcard is not functioning.I have followed quite a few different guides, one of which is the sticky, please forgive me for not remembering which guides. I'm going nuts over this.As you can see below it looks like it is still using the oss driver.

uname -a
Linux freekbox 2.6.31-21-generic #59-Ubuntu SMP Wed Mar 24 07:28:56 UTC 2010 i686 GNU/Linux

aplay -l
aplay: device_list:223: no soundcards found...[code].........

View 1 Replies View Related

Debian Multimedia :: Movie Player Cannot Read From Resource

May 22, 2011

I can not watch a DVD video using Movie Player. It gives the message: An Error Ocurred Can not read from resource. What does it want me to do ? Buy a new DVD player ? I have no trouble with this drive in another distribution on the same computer, or playing audio CDs in this very Debian OS. So I don't think there is anything wrong with the DVD drive. VLC won't do anything either.

View 4 Replies View Related

Debian Multimedia :: KDE Jessie 32bit - Thunderbird Spinner On Taskbar Is Busy

May 24, 2015

This is a minor bug but the Thunderbird spinner is spinning on the taskbar until I open another program.

I can open firefox, dolphin or another program and the spinner stops spinning.

I'm using linux.

I don't think this happened in a previous version.

View 11 Replies View Related

Fedora :: Cannot Unmount Because Device Is Busy

Feb 26, 2011

Code:
HP 210 Mini
Fedora 14 xfce
2.6.35.11-83.fc14.x86_64

I have inserted my handy drive. However, when I right click and select unmount I get the following message:

Code:
An application is preventing the volume "New Volume" from being unmounted

So I try from the command line:

Code:
umount /dev/sdb1
And I get the following message:

Code:
umount: /media/New Volume: device is busy. All I have done is copied some files to my handy drive. So I am not sure what process is keeping my handy drive busy.

Is there any command that I can use to see what process of anything else is using the handy drive?

View 3 Replies View Related

Ubuntu :: Device Is Busy - Can't Format

Feb 17, 2011

I have a 250gb External HD and wanted to format it using the disk utility but every time I try Ubuntu tells me that the drive is busy.

How is it busy? I have nothing opened and haven't used it in anyway other than plugging it in. It doesn't even tell me what's using it.

View 4 Replies View Related

Debian Multimedia :: Libao2 Or Libao4 Returns Dpkg Error

Apr 6, 2010

I ran into this:[url]

I tried to ignore it (yesterday it made me remove xmms2-plugin-all, i could have lived with that for a few days), but it is getting worse: gnomebaker, mpg123, vorbis-tools, cdrdao, etc.

So i remove beloved apps , run aptitude install -f and what not. The result is that either libao2 or libao4 give me trouble (depending which version is installed at that moment).

After the upgrades are available again it's big fun over here. Is it just me or are others running in a lot of "dpkg returned an error message" too? The first time ever i got to use aptitude to get problems solved. Gnome terminal gives me segmentation fault but no error messages. And so on.

View 3 Replies View Related

General :: Named Stops / Device Is Busy On Restart

Mar 21, 2011

Named has been working fine for months on Fedora core 14 with updates current.a few days ago it stopped working. I tried a service named restart and received the error message: stopping named: umount:/var/named/ chroot/var/named: device is busy.I tried using kill process, which did not work. However if I use kill 9 <named process>, followed by service named stop, I can then restart the service and it works for a number of hours (less than a day), then stops again and produces the error message above when I try to restart it.I can get it working again using the procedure above, but only temporarily.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved