Debian Multimedia :: ALSA Not Memorizing User Settings
Feb 24, 2015
This is probably one of those situations easy to solve but I haven't had any success as I've been messing around with the sound handling in my system.
I found it had running ALSA, OSS and PulseAudio and ended up purging everything in the system except for ALSA. Pulse Audio, for some reason, would shut down the sound-card when I muted sound though keyboard shortcut; after that, I had to manually open the sound table and enable a master control that would always remained closed.
Now, after purging the system of the excess baggage, ALSA will not retain the settings of the user; system will always reboot with PCM sound control fully closed.
View 0 Replies
ADVERTISEMENT
Dec 3, 2010
I've recently encountered a sound issue and I recently installed the nvidia gt220 in my box and was thrilled at how well it worked with hdmi until I tried to use the audio. I updated my alsa and went into the alsamixer and it does detect my gt220. I unmuted all spdif and tested the sound and with success the sound test works. I know the card and device numbers that work with the audio but now sure where to make changes so it will default to that device instead of the onboard audio that it seems to try to use now. I am running lucid 10.04.
View 4 Replies
View Related
Dec 25, 2010
how to save my settings in Gnome-Alsa mixer. Everytime I restart I have to go in and set everything Is there a save I'm missing?
View 7 Replies
View Related
May 20, 2010
I have a Logitech clearchat pro usb headset and it works really well. However every time I plug it in I have to turn up its volume in alsa mixer. Also so that the right volume slider is controlled (by the volume keys) I have to change the output in pavucontrol. Does anyone know of a way that I can make this happen on its own? I guessed writing a udev rule might work (not that I have ever done one), but I don't know the commands that are equivalent to what I do.
View 1 Replies
View Related
Nov 25, 2009
I have 5.1-speaker set, confed succesfully with alsa. alsamixer -c 0 -command shows volume of all the speakers I want to set up. My problem is, when I have alsamixer open and change main volume from gnome-panel (it's called pavucontrol for me, pulseaudio?) it "resets" all speakers to max (100%). Only master volume changes like planned. For example, if I have front speakers set to 50%, center to 75%, surround to 100%, subwoofer to 40%, when changing volume from gnome's panel it only changes master volume, and puts every other speaker to max. How to prevent this? Do you have any clue? I had not any problems with this in openSUSE 11.1. Alt+F2 not working with Emerald decorator Screens go black after 10 minutes or so in openSUSE 11.2
View 5 Replies
View Related
Dec 24, 2010
I notice that each time I boot my computer, under the playback section of the ALSA Mixer the 'Speaker' volume control is turned all the way down. Even when I return it to the proper level, and then restart my computer later, the slider for 'Speaker' seems to default back to the previous state mentioned above. Is there a way to set the default for the ALSA mixer in a .conf file of some sort so that the default setting for 'Speaker' is always at max?
View 4 Replies
View Related
Jan 27, 2011
I've been having some issues with my sound card since I cannot play a sound with my current user. As a root user I can play sounds with "aplay" but as my regular user, I can't play anything
# aplay file.wav
ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ALSA lib conf.c:4154:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:4633:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2211:(snd_pcm_open_noupdate) Unknown PCM default
aplay: main:564: audio open error: No such file or directory
# sudo aplay file.wav
Playing WAVE 'file.wav' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
I have add my user to the audio group with no success
usermod -a -G audio myuser
View 2 Replies
View Related
Nov 19, 2010
I have recently been forced to do a hardware upgrade (my previous mobo died). Now, sounds works ok with,amarok because kde has recognized the new hardware and switched to it.
..... does not work, likely because flash uses alsa-oss which is probably not configured automatically. I have tried uninstalling and reinstalling both alsa-oss and flash, but it didn't solve the problem.
View 1 Replies
View Related
Mar 6, 2011
I'm having some trouble getting ALSA working on my system. I had been using OSS for awhile but decided to move to ALSA after a kernel upgrade. ALSA worked fine except for the tedious chore of having to run alsaconf everytime I booted up. I was getting errors message for OSS during boot up telling me OSS modules weren't loading properly and linux-headers needed to be installed to get it to work properly again. I ended up installing the linux-headers later due to some nvidia driver fiddling. My system has now reverted back to OSS and I can't seem to get ALSA to work at all. I have libasound2, alsa-base, alsa-utils and alsa-oss installed and alsaconf says no ALSA modules are loaded. I've been searching around and haven't found how to get rid of OSS to install ALSA properly.
Distro: Debian Lenny
Kernel: 2.6.26-2-686
Sound Card: Creative Labs SB Audigy
OSSv4.1
ALSAv-current packages according to synaptic
View 9 Replies
View Related
Aug 27, 2010
How to copy a user with all personal settings like desktops icons, desktop background etc. under Lenny?
I'd like to create a new user with all settings from the existing user.
View 4 Replies
View Related
Apr 23, 2016
VLC says: "main input error: ES_OUT_SET_(GROUP_)PCR is called too late" when I am playing back most Bluray discs I have tried.
See this bug post for what I am talking about: [URL].... It has to do with playing back h264 video with ALSA.
Possible fixes:
1. Obtain VLC 2.2.2 - see below
2. Fix by Modax here: https://trac.videolan.org/vlc/ticket/10422 - not currently using dmix and not sure how this will relate to HDMI sound
3. Use Pulseaudio - this does not work for me to get HDMI sound and I do not use Pulseaudio as a rule
I have just tried to compile VLC 2.2.2 and the configure script finished properly but early in the build it fails.
With make the error is:
Code: Select alljason@MEDIA:~/vlc-2.2.2$ make -j4
make all-recursive
make[1]: Entering directory '/home/jason/vlc-2.2.2'
Making all in compat
make[2]: Entering directory '/home/jason/vlc-2.2.2/compat'
GEN dummy.c
make all-am
[Code] ....
And with compile the error is:
Code: Select allMAKE : compat
MAKE : doc
MAKE : po
MAKE : share
for f in vlc.desktop.in skins2/default/theme.xml skins2/default/subX/about.png skins2/default/subX/eq.png skins2/default/subX/font.otf skins2/default/subX/main.png skins2/default/subX/playtreeglyphs.png skins2/default/subX/pl.png skins2/default/subX/sysbuttons.png skins2/default/subX/vol_anim.png skins2/default/subX/vol_slider.png
[Code] ....
I have tried installing 3 different versions of libua-dev, 5.1, 5.2 and 5.3. What could be the problem?
With the bugged audio drivers I'm going to replace the computer but it would still be nice to be able to know the solution to compiling VLC 2.2.2.
View 2 Replies
View Related
Mar 19, 2010
I'm using Debian squeezy amd64-based with KDE4.3 from the repo. I've installed kde-minimal package with some additional packages from KDE. Also I have GNOME installed on my system.
So the problem is that when I'm in KDE alsa is not shares between applications. It means that when I'm listening Amarok, for example, I can't play any other sounds in the system, not in browser or KPlayer. And if I stop Amarok playback, I can start listening some other application or watch a movie with a sound.
It looks like I'm using good old OSS again. Back to the 90's =)
In gnome meanwhile all works fine. I suggest that I'm missing some configuration or a package, or something else. I've also tried to install kde-full package, but nothing changed.
View 2 Replies
View Related
Jun 18, 2010
I am using a couple of Debian Distro (Sid and Lenny) add some Ubuntu into the mix. I made the switch because I was amazed and satisfied with Debian --> once installed, everything works. For me that's okay for o so many years now. I don't question a lot because it just works and I do my job on it satisfactorily. Namely programming the LAMP style programming. Lately I have been using Debian to communicate over the internet -- using Skype and Pidgin and other such things, not to mention listening to music, watching movies, just using the default applications when I originally install Debian.
Along the way, I need to configure something -- that is desktop related -- like the screen resolution of a new LCD monitor replacing the old one and such. Now about my sound -- I'm not touching it because it is working. But that is not the case always. Now I have a constant error -- it is irritating. Rhythmbox don't make a sound always when I have open a web browser (iceweasel, chrome, epiphany) and a site with multimedia object on it -- like a video or something. So how do I correct this? How do I know, too what I am using -- ALSA or Pulseaudio?
View 1 Replies
View Related
May 17, 2010
Is there any repository providing latest ALSA packages for Debian?
View 4 Replies
View Related
Aug 24, 2010
I recently bought a logitech headset which is working very nice, the thing is that I cannot make it my default device when I plug it in. I edited /etc/modprobe.d/alsa-base.conf to make snd-usb-audio the default card but it only works when the computer is turned on with the headset plugged in. A workaround is to plug it and then "alsa force-reload" but I find it very ugly plus it kills all apps using audio and leaves the volume indicator unstable.
View 1 Replies
View Related
Dec 17, 2010
In the process of trying to get the softmodem working, I finally attached speakers to this laptop and tried to play some sounds. Nothing but silence. Both the KDE system sounds and a stand-alone player (noatun) produce nothing. No error messages that I can find, either. (That might explain why the softmodem is dead, too...) I've run alsaconf several times, and even uninstalled and reinstalled ALSA. It thinks it is working, but is not. What sorts of things do I need to check to find where it isn't working?
Info: The motherboard is a FIC 3500W with the VIA P4M800 integrated chipset. This includes the VIA 8237 sound system, which is what ALSA detects and tries to use. The machine also has a Realtek ALC655 but I don't see any drivers for that in the lsmod output, so this is a possible source of the trouble.
View 11 Replies
View Related
Feb 25, 2011
The sysytem I use is Debian Squeeze. what's wrong but jackd2 from debian official repositories does not work with alsa (I have alsa-base, alsa-tools, libaudio-dev, libaudiofile-dev and libasound2-dev installed). Now I downloaded fresh jackd2 source from sourceforge and when I try to "./waf -configure" it it says that there is no alsa package or it's too old in the system and configures itself without alsa support.
View 2 Replies
View Related
Mar 20, 2011
I have a E-MU 0202 USB soundcard that I want to use as a input for my Debian Squeeze 6.0.1. Stock squeeze (kernel 2.6.32-5-686, version 2.6.32-31) has alsa-driver 1.0.21 as kernel modules and alsa-utils 1.0.23. The E-MU needs 1.0.23+ alsa driver, with 1.0.21 it loads in alsa but is not functional (no input) So I tried to install the 1.0.23 modules with module assistant: m-a update && m-a prepare m-a a-i alsa I left all conf-files (like /etc/modprobe.d/alsa-base.conf) standard. When I now connect the E-MU device, my whole system becomes unresponsive (to keyboard/mouse), and I get the following messages in my console: BUG: soft lockup - CPU#0 stuck for 61s! [modprobe:1292] Also, when I start top before connecting, I can see modprobe process taking 100% for a few minutes before system freezes completely. It did generate an oops once: [URL].... Does anybody here have any ideas how to get this working?
View 3 Replies
View Related
May 29, 2011
I decided to break free from the horrible life of a windows vista user. I like my new debian (Wheezy) installation and everything worked fine so far. Now I stumbled upon a huge problem. When I want startup and login into my gnome installation the first application I open gets to play sound and others after that just don't work. I looked endlessly on google but in my understanding the problem is within the ALSA driver.
Some specs :
OS version : Debian 7 (Wheezy)
Laptop brand : Packerd Bell Easynote LJ-65
Kernel installed : 2.6.38-2-686 (Standard one in wheezy)
View 4 Replies
View Related
Mar 31, 2015
Using debian testing.
Pulseaudio got installed by default here during installtion. Since I don't want it I first ran "systemctl disable pulseaudio", "pulseaudio --kill", then without rebooting I use mpd with alsa alone and it worked fine.
But then i rebooted, and now all applications, mpd, mpv, chromium etc just says that alsa returns with "Device or resource busy", tried rebooting again with no effect.
The soundcard appears as card 1 according to the output of "aplay -l", and defined that card 1is suposed to be default with this in "/etc/asound.conf":
Code: Select allpcm.!default {
type hw
card 1
}
ctl.!default {
type hw
card 1
}
It occurred to me that there might be an issue with permissions to the soundcard so I ran "ls -l /dev/snd"
Code: Select alldrwxr-xr-x 2 root root 80 Mar 31 03:27 by-path
crw-rw----+ 1 root audio 116, 8 Mar 31 03:27 controlC0
crw-rw----+ 1 root audio 116, 2 Mar 31 03:27 controlC1
crw-rw----+ 1 root audio 116, 12 Mar 31 03:27 hwC0D0
crw-rw----+ 1 root audio 116, 7 Mar 31 03:27 hwC1D0
[Code] ....
My user is a part of the audio group:
Code: Select alluid=1000(roberth) gid=1000(roberth) groups=1000(roberth),24(cdrom),25(floppy),29(audio),30(dip),44(video),46(plugdev),108(netdev),111(scanner)
As far as I can tell, that looks fine unless I am missing something?
View 1 Replies
View Related
Feb 18, 2011
I want to remove pulse and install alsa instead but I can't seem to be able to do it. I tried to search for all packages with "pulse" in their names and purging them but it didn't work because aptitude wanted to remove all of the packages that used pulse with along with pulse.
View 2 Replies
View Related
Nov 13, 2015
I'm having a problem all the sudden with amixer. set Master 5% used to control the pulse audio master volume. Suddenly, it will only raise and lower the headphone volume. Pulseaudio works, but I no longer have a master volume at all.
View 3 Replies
View Related
May 24, 2010
I'm at the tail end of my upgrade from Lenny to Squeeze and I think this sound issue is the last one I have.
As usual I've tried hunting for some answers but it gets very confusing when people are using KDE or PulseAudio or Ubuntu or slightly different configuration to what I have.
My config:
Debian Squeeze 2.6.32
Alsa (just because I was using that in Lenny and it was working, no other reason)
Gnome
Rhythmbox
Skype
Skype is pretty good - it has the sound configuration built in, so I say ring the speakers and it does. I say talk to the headset and it does. Rhythmbox is my music player (again just because I was using it under Lenny) however it only wants to play through the headset. I can't seem to get it to play to the speakers attached to the rear port.
Summary of some settings (transposed manually)
# aplay -l
*** List of PLAYBACK hardware devices ***
card 0: Headset (Logitech) device 0: usb audio
subdevice 0/1
card 1: Intel HDA device 0: ALC883 Analog
[Code].....
View 9 Replies
View Related
Apr 29, 2011
I have recently acquired a Lenovo Q150 machine and attempting to use it as a HTPC. I've been reading that with this platform a newer kernel is required to make wireless, sound and a few other tweaks work correctly--so I bumped up to testing repositories to upgrade to the 2.6.38 kernel.[URL]...
The audio on this device has been more than a pain. I'm currently using XBMC to play media on this device and after setting the outputs to custom: plughw:1,9 sound is played correctly. I found this out by using alsamixer, selecting the sound card with the F6 key (Nvidia 1) unmutting all outputs, quiting, and running speaker-test -D plughw:1,X where X is the sub-device from the output of aplay -l until sound could be heard from the receiver.
Now my problem is that applications like mplayer, and iceweasel won't output any sound. I'd prefer not to use the optical out on the device and would like to send sound over HDMI. Has anyone had any luck getting it to work as it should?
I've also installed pulseaudio, not too sure if this is really needed. I've also used module assistant before upgrading to compile alsa from source, it worked but i just decided to upgrade the kernel instead of dealing with m-a every time an update comes through. Linux floppy 2.6.38-2-amd64 #1 SMP Thu Apr 7 04:28:07 UTC 2011 x86_64 GNU/Linux
apt-cache policy alsa-base
alsa-base:
Installed: 1.0.23+dfsg-2
Candidate: 1.0.23+dfsg-3
[Code]...
View 1 Replies
View Related
Aug 23, 2015
I'm having some issues with audio crackling/buzzing when turning up the volume, or on songs that have overclipped / overdriven parts, which doesn't happen on Windows (on it those sections are just "dampened"). Is there some certain settings in ALSA that are used to deal with this? Or is it something specific to the driver for the hardware? Speaking of which I'm using some integrated audio which goes by the name of Intel ICH7, and the chip itself is Analog Devices AD1981B.
I'm only using ALSA, without PulseAudio, and I've made sure the volumes both in the media players and under alsamixer aren't turned too high (PCM is at 47% and "Headphones" -- what is "Master" on Windows and on other soundcards under Linux -- is on 22%), so it isn't an issue with the software mixer being turned up too high. Also I'm using a pair of quality headphones (Sony MDRV55) so it's not an issue with the analog audio output either. I've also tried multiple other headphones and the result is the same.
View 4 Replies
View Related
Sep 1, 2011
I'm looking for the easiest or cleanest way to copy a user's settings to a new user's settings. I don't need to copy any files from the original user, but setting up a home directory would be great.
If it's done at the command line, that would be just fine. I'm very familiar with working at the command line.
View 9 Replies
View Related
Oct 24, 2015
I want to forbid a user to make changes to preferences of iceweasel, specifically to modify proxy settings of the browser. Although user should still be able to use the browser.
I assume these settings are stored in some file on a harddrive? If so, what is this file and can i simply make it read-only for users? Or any other solution?
View 4 Replies
View Related
Jan 10, 2010
I have 2 users and I would like to copy all the files and folders in one home dir to another.... sounds simple, til i got started. Ive tried
Code:
sudo cp -nRv /home/user1/* /home/user2
but that didnt copy the .* folders. Im after the firefox and thunderbird folders mainly, but all of them is OK too.
im talking about the .adobe, .amsn ..........
How can I copy the .* folders from one user home folder to another and then give the correct permissions to the new user.
View 4 Replies
View Related
Mar 17, 2011
I'm trying to update ALSA, following the instructions here: SDB:Alsa-update - openSUSE.I'm not sure how to proceed at STEP THREE. There are two sets of instructions, based on whether or not the kernel has been updated. I'm not sure if it has been. How can I make sure?
View 2 Replies
View Related
Jul 9, 2010
My terminal text is unreadable. Where as the default output would usually fill half the screen it probably fills around 1/20th now. Basically it looks like the text is 1px in size. I was about to install a graphics driver (nvidia) but doh I can't see what I'm typing... I can't start gdm even after memorising the process of logging in and starting gdm (I think gdm is failing to start anyway) I'm using the default xorg.conf provided with the LiveCD;
[Code]....
View 2 Replies
View Related
