Debian Multimedia :: Couldn't Find Any Of Network Drivers
Aug 14, 2010
After about 2-3 months using Linux i found the right OS for me which is Debian Stable i386 LXDE + OpenBox.When i finally was totally sure about my choice then it was time to buy a new PC. I bought an Acer Aspire 5541.
Well...When i was going to install Debian stable it couldn't find any of my network drivers..so i installed exactly the same but with Testing in the hope of getting every hardware to work with the right drivers. Well.. here is what i have done.Wireless did not work but i fixed it.Sound did not work bit i fixed it.nd to fix my window borders and workplaces (i am not using compiz but for some reason in my last reboot themes , the number of workplaces set to 1 and window borders lost...)
View 10 Replies
ADVERTISEMENT
May 30, 2010
I'm looking for drivers for a some ethernet cards: 02:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec: 8139] (rev 10) Macronix, Inc. [MXIC] MX987x5 [10d9:0531] (rev 25) and Dlink dfe-538tx
I found some drivers at: Realtek These are for the Realtek card. They are: UnixWare 7.1.x and SCO Unix 5.0.X Which one would I use for Debian Lenny? I couldn't find any for the Macronix I found this site for dlink: ftp://ftp.dlink.com/NIC/dfe538tx/Driver/Linux/
[Code]...
I'm not sure what to do with the dlink. I'm not familiar with Linux drivers. I don't know if this is the right way to go or if there are drivers for linux already.
View 3 Replies
View Related
Apr 29, 2010
I seem to have a problem with my Firefox upgrade. I am getting the following error: could not find compatible GRE between version 1.9.2.3 and 1.9.2.3.
View 9 Replies
View Related
May 25, 2010
Couldn't find anything like nictstat(solaris) on Debian systems.
View 3 Replies
View Related
Apr 7, 2011
I cant get openSuse to find my wifi adapter or it does not have the driver installed.
My wifi adapter is the Realtek RTL8191SE 902.11b/g/n
I found a linux driver on the internet, but it asked me to run make in the console and when I did so it said that it couldn't find make.
how to install make from openSuse without the internet (I'm using my windows partition).
View 7 Replies
View Related
Nov 30, 2010
I have a Debian Sid x86_64 installation on my laptop. I used to use skype a lot when I was on ArchLinux in chrooted 32bit environment. Nowdays, I tried running skype straight on the 64bit environment, when I finally got it running, I couldn't get into sound settings, it froze right when I clicked the Sound options... So I decided to make the 32 bit environment, so I used debootstrap and schroot and now I have fully functional 32bit chrooted system. It does the same thing all over again! it drives me crazy... I should probably tell you, I use pulseaudio. This makes it a little hard to like the distro for me... I used to be an ArchLinux user for quite few years, but I didn't want to solve so many things every day, so I went with debian
View 1 Replies
View Related
Feb 19, 2011
I am not sure if this is the correct forum but I trust the Administrators can move it if need be. I recently "Frankensteined" a computer together putting Ubuntu 10.10 as the OS. I have a ScanExpress S40 scanner and cannot find drivers for it nor does anything occur when I plug it into the computer. where I can find a generic driver that work.
View 4 Replies
View Related
May 5, 2011
I have debian squeeze (and a bit of sid, actually). I wanted to install the newest pidgin, so I added at sources.list the sid repository, and tried to install pidgin, but it needed the newest perl-base 5.12.3-6 (from 5.10.1-17). So I let it upgrade. after that I realized that my mysql server isn't running, and actually this is my problem. So I tried reinstalling it, home:/home/amalia# apt-get install mysql-server-5.1. Reading package lists. Done Building dependency tree Reading state information. Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies:
[code]...
View 2 Replies
View Related
May 1, 2010
Just installed Ubuntu Netbook Remix 10.04 on my Acer ao532h netbook.I did a clean install, but I had been running UNR 9.10 for some time without a hitch. The new version fixed a slight bug that had made it necessary to tinker with the wifi adapter in the old version, and also seems to boot faster as advertised. However, there is one slight problem with the new version: when I attempt to engage visual effects in the appearance control panel (something which worked in the old version), the options are grayed out, as if the video driver is not installed. When I go to the hardware drivers panel, it doesn't detect any drivers to install. As far as I can remember, I didn't have to install any drivers for the GMA 3150 graphics card in the old version of UNR.
View 4 Replies
View Related
Apr 15, 2010
I just got an 8 Gb Sandisk Sansa mp3 player and i can't seem to find any drivers from the Synaptic package manager. I did searches on mp3, mp3 player, Sansa and Sandisk and could seem to find anything that looked like what I need. I was able to find a driver for it on my fedora 12 laptop by searching on "Sansa" but am stuck on my Ubuntu Desktop.
View 3 Replies
View Related
Aug 13, 2011
I've installed the Ubuntu 10.04 Server onto a PPC G4 Mac just for the experience of setting up a server. During the installation process Ubuntu couldn't auto-configure my DHCP Network. I'm using the airport card on a wireless network. How can I manually configure the network once Ubuntu is installed.
View 6 Replies
View Related
Jul 4, 2010
I've just installed openSUSE 11.2, one problem is suse didn't find an internet connection when suse performed the ..."automatic system configuration. This routine attempts to configure your network and Internet access and sets up your hardware"... Where can I manually configure the network. I'm in the network folder now no luck. I've been using every documentation I could find Novell Documentation and DVD installation/11.2 - openSUSE Network Status: Unknown network status
View 9 Replies
View Related
Jul 22, 2011
I am having issues with 3d I am trying to start up a game called auteria but it displays this error "Could not find a compatible opengl display resolution. Please check your driver configuration. (Error: Couldn't find a matching GLX visual)" I am on ubuntu 10.10 could anybody give me a solution on how to fix this issue?
View 5 Replies
View Related
Oct 13, 2010
I'm planning on running DirectAdmin on OpenSUSE 11.3 but I couldn't find anything about it. So my question is if anyone actually has done it before.. with good results preferably.
View 5 Replies
View Related
Jun 27, 2010
When I type this command ;sudo apt-get install build essentialI got this ;
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]...
View 2 Replies
View Related
Jul 29, 2010
I had installed Ubuntu server 10.04 and i am trying to install Webmin for GUI.
When i start with "sudo apt-get install update" the following gets displayed...
Reading package list... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package updates
I had configured correct IP address and i am connected with internet. After googling for some time i figured out that missing repository could cause such problem, which i am not sure.
View 9 Replies
View Related
Sep 8, 2010
I'm newbie in ubuntu and trying to install ffmpeg but there's an error which i couldn't figure out.E: Couldn't find package libmp3lame-devi'm trying somethings according to this article;[URl]
View 7 Replies
View Related
Oct 25, 2010
I'm new to linux, have been somewhat of a computer geek my whole life and thought it about time that I delved into the world of linux. So I installed ubuntu 10.04 on my computer. I love it. However, I can't get my wireless to work. In my dorms there are no ethernet hookups, so I have to use the wireless. I typed "sudo lshw -class network" into the root terminal. The important things that I figured out was the bus info: pci@0000:4:06.0 and the pysical id: 6 (not sure if the physical id is important but it sounds like it is). I then did a lspci and found that at bus 04:06.0 it is a RaLink Device 3060. I downloaded the .tar file for the driver. I could not find instructions for it online so I followed the ones for the rt2860 driver : [URL].... I could not get it to work, It built ok and installed ok, but when I do the modprobe I get an error saying the device or resource is busy. Either that or that it cannot be found. One thing that I found weird was that I couldn't get it to build a 3060 driver, it would only build a 3562 one.
View 3 Replies
View Related
Apr 26, 2011
I have ubuntu intrepid installed in one of the amazon servers , when i try to install any software using apt-get i used to get the following error.Code: E: Couldn't find package E: Some index files failed to download, they have been ignored, or old ones used instead.
View 5 Replies
View Related
Jul 3, 2010
When i install libdrm, i get the following error:checking for clock_gettime... no.checking for clock_gettime in -lrt... no.configure: error: Couldn't find clock_gettime
It seems that it cannt find clock_gettime function, but i find it as follow:
$ grep clock_gettime /usr/include/time.h
extern int clock_gettime (clockid_t __clock_id, struct timespec *__tp) __THROW;
View 6 Replies
View Related
May 13, 2010
#uuname -a Linux 2.6.18-194.3.1.el5 #1 SMP Sun May 2 04:17:42 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
# apt-get update
Reading Package Lists... Done
Building Dependency Tree... Done
# apt-get upgrade
Reading Package Lists... Done
Building Dependency Tree... Done
0 upgraded, 0 newly installed, 0 removed and 0 not upgraded. # apt-get install sun-java6-jdk Reading Package Lists. Building Dependency Tree. E: Couldn't find package sun-java6-jdk
# apt-get install aptitude
Reading Package Lists... Done
Building Dependency Tree... Done
E: Couldn't find package aptitude
View 5 Replies
View Related
Nov 11, 2010
Firefox 4.0b7 is out. I am compiling it now. First though, I had to update cairo and pixman. Cairo was easy enough modifying the slackbuild, but pixman was a peta. I couldn't find a slackbuild, so I had to really modify one. It worked, though, building pixman first,then cairo. The FF build has been going for about 10 minutes, so I know it has a way to go.
View 13 Replies
View Related
Mar 16, 2011
I couldn't find the kernel docs that go with 13.1. These docs would be the result of running this in the top-level kernel source dir.
make pdfdocs
make htmldocs
etc.
Are these not packaged? Are these built ever as part of a release or test cycle? Do any other slackers ever build these? I am seeing lots of errors from make pdfdocs "how much attention is given to DocBook on slackware?".
View 2 Replies
View Related
Jul 14, 2009
I have centos 5.3.I couldn't find git package in any of the yum repositories. Is there a package location, version you would recommend.
View 1 Replies
View Related
Jun 4, 2010
Ok.. when it comes to drivers and kernels...I have a rented server - so I do not have local access to it, and I do not have a KVM or remote console to it.
This is the current kernel that came with it:
Linux version 2.6.26-2-686 (Debian 2.6.26-22lenny1) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed May 12 21:56:10 UTC 2010 the network card module according to support is r8169 (when i do lsmod i see r8169 listed), lspci lists it as: Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03).
So.. where everything went bad is after I installed grsecurity kernel via apt-get install linux-image-grsec. It installed and rebooted successfully, but without the right network card module. The datacentre support had to reboot it to the original kernel for me.
So - i don't know how to update the network card drivers of the grsecurity kernel? It has to be perfect (I can't do trial and error) because each attempt that fails, I have to engage the datacentre support to reboot the system back into the original kernel. Apparently the new kernel detected it as a gigabit fibre card.
View 2 Replies
View Related
Jan 29, 2010
Code:
$ uname -a
Linux MyBox 2.6.28-17-generic #58-Ubuntu SMP Tue Dec 1 21:27:25 UTC 2009 x86_64 GNU/Linux
[code]...
View 3 Replies
View Related
Mar 6, 2010
I did a full install of 9.10 on my Dell Inspirion 1200 laptop & use a Dell 1350 card, after several posts and replies I went to [URL]and followed the instructions for Ubuntu/Debian. This is the result I get....
mike@mike-laptop:~$ sudo apt-get install b43-fwcutter
[sudo] password for mike:
Reading package lists... Done
Building dependency tree
[code]....
I followed this procedure before installation (live CD) and it successfully found and installed the firmware. Apparently it was saved in live CD. What do I need to do?
View 2 Replies
View Related
Feb 20, 2011
Linux noob, and I'm trying to install a little program on my rootserver, but it requires libboost and libboost-dev. Unfortunately ubuntu can't seem to find the packages and google does not help either. The only info I found was telling me to install "gnuradio" or something, which takes up 138 mb. So, how can I install these packages now?also: I cancelled the installation of gnuradio via "CTRL+C", will this cause any problems? Are there some trash files left on the system now?
View 1 Replies
View Related
Aug 4, 2011
When I try to play some OpenGL games, I get this error.How can I fix this? My graphics card is Nvidia, and I use the nvidia-current driver.Here's what it says under OpenGL/GLX Information. I don't know if this is the info you need, but oh well.
GLX_EXT_visual_info
GLX_EXT_visual_rating
GLX_SGIX_fbconfig
GLX_SGIX_pbuffer
[code]....
View 3 Replies
View Related
Jun 26, 2010
I'm trying to install Semantik 0.7.3 on OpenSUSE 11.2 and having difficulties with the dependencies. Here's the last message my terminal spit out on my attempt to start building:
--A whole bunch of stuff the forum apparently won't let me post because it thinks it's URLs and I'm too new--
error: could not open /usr/share/kde4/apps/cmake/modules/KDELibsDependencies.cmake
--End
I'd had some problems with dependencies on the way to this message and installed gcc and g++ successfully to solve them. But now it's telling me can't find KDELibsDependencies.cmake. I've checked it out - it's not in the directory. After installing cmake, I'm kind of at the end of my wits - I just don't know where to look further.
Another hint that seems to be connected with it: As I was trying to install rkward 0.5.3 (also today) it had problems with cmake too:
CMake Error at /usr/share/cmake/Modules/FindKDE4.cmake:84 (MESSAGE):
ERROR: cmake/modules/FindKDE4Internal.cmake not found in
/home/erget/.kde4/share/apps;/usr/share/kde4/apps;/etc/kde4/share/apps
Call Stack (most recent call first):
[Code]....
View 7 Replies
View Related
