I am trying to connect a Sansa Clip Zip with rockbox firmware. Debian does not recognise/automount the drives (4gb of internal mem and 32gb sdhc card) whereas Mint 17 had no problem with them.
Are there additional libraries needed? I believe the filesystem is FAT32 rather than anything more exotic so not sure why it doesn't recognise the drives. The clip zip charges but doesn't mount.
Last week when I was still running Lucid I could get Banshee to read and write to my Sansa Clip Plus fine, but now that I have upgraded to Maverick Banshee can no longer see it.
I have it set in MSC mode with an .is_audio_player file (that worked back in Lucid) and Rhythmbox can see it and read and write to it fine. Has anyone else encountered this problem or does anyone else know what might be causing it? Banshee's version is 1.7.6 and the contents of my .is_audio_file are posted below:
Code:
audio_folders=MUSIC/,PODCASTS/,AUDIOBOOKS/
output_formats=application/ogg,audio/mpeg,audio/flac,audio/x-ms-wma,audio/aac,audio/mp4,audio/audible
input_formats=application/ogg,audio/mpeg,audio/flac,audio/x-ms-wma,audio/aac,audio/mp4,audio/audible
folder_depth=1
playlist_path=PLAYLISTS/%File
playlist_format=audio/x-iriver-pla
I've been using a Sansa Clip as my portable music player, since it can play ogg files, and with 64 bit F12 I've been able to transfer music back and forth fromthe Clip to my computer via usb port. There seems to be an issue with F13 not recognizing when the clip has been plugged into the usb port.
View 10 Replies View RelatedI just upgraded from 9.10 x64 to 10.04 x64 on my desktop. My Sansa Clip+ (USB mass storage mp3 player with SD card slot) stopped auto mounting. It worked fine in 9.10.
dmesg:
Code:
[ 56.290051] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 56.360222] hub 1-0:1.0: unable to enumerate USB device on port 5
[code]...
I can not get my desktop running Ubuntu 9.10 to recognize my SANSA clip music player. When I plug it in (nothing), No icon on desktop, nothing in Nautilus. I've verified the USB ports are working by plugging in thumb drives and my I-pod.
When I hook the SANSA to my wife's laptop running Ubuntu 8.04 it works great no problems. I must have a setting wrong on my computer, but have NO idea how to fix it.
I've always had trouble with Banshee recognizing media devices. Right now I have a Sansa Clip+ which I'd really like banshee to recognize. Unfortunately it wont at all.
View 1 Replies View Relatedmy Lucid lynx doesn't mount my mp3 player,its already setup in USB-MODE as MSC , but it doesn't show it in desktop, or media folder, or mnt folder or under file system my usb is detected
this is my lsusb output:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]...
I was going to get a player that would be compatible with rockbox, but instead I wound up with a coby 707 mp3 player. It's nice enough but dragging and dropping is all I can do to get music on it. I was wondering if there is a way to manually create a playlist and pop it in with the music files?
View 1 Replies View RelatedI used to use iPodLinux, but I just did it for fun as it didn't support my iPod at that time. Now I decided to install Rockbox, and I'm having problems. I downloaded the utility for Linux, but I can't run the file. I really don't know what to do. I tried './', 'sh', and some other things I don't remember.
[Code]...
I have an 8gb Sansa Fuze, filled with mp3s only. Although it appears in rhythmbox, the songs don't. Plus I can't even access it as a hard drive I've been using it with Winamp when I was still using XP, if that matters.
EDIT: seems like it was in MTP mode by default when 'Auto Detect' was set. I switched to MSC and I can now access it but the music still does not appear, whether in Rhythmbox or in the folder 'MUSIC'.
I can't load any music from my Sansa MP3 to rhythmbox. Is there a better music program to download? Also, cannot play DVDs
View 1 Replies View RelatedI just upgraded to 10.04 and now my Sansa Fuze does not get mounted. The Fuze screen says connected and then writing, but then locks up.\ I have to disconnect it and do a reset before I can use it. I did get an error message on from Ubuntu. As I recall it looked like this:
DBus error org.gtk.Private.Remove Volume Monitor.Failed: An operation is already pending Anybody else tried to use their Fuze with 10.04?
I have a numbe of music files in the ogg format, and they work fine on my Sansa Fuze.However, I recently used soundconverter to convert some flacs to ogg. These files are not showing up in the Sansa's menu once they are copied over.One thing I notice is that the file properties display as Type 'Ogg Multimedia File' for the ones that work, whereas the ones from Soundconverter display the Type 'Ogg Audio'
View 1 Replies View RelatedHardware: Sandisk Sansa m260
Software: 2.2.5A
When I copy files over ( from a PC running Ubuntu 10.10 ) to my Sansa m260 each track is listed multiple times. When I look at the contents with my file explorer on my PC I see only one copy of each track.
I tried deleting all files and starting over again on a fresh battery.
Ubuntu 10.04 won't recognise my Sandisk Sansa Clip+ as installed on comp. It sees memory sticks and memory cards. Are there drivers that I need to install?? Anything in Synaptic Package Manager that needs to be installed?
View 4 Replies View RelatedI need to save some clips from a DVD as either a DV-AVI or DV-MOV format. What program can I use to do this?
View 4 Replies View RelatedFirst some background info:The Sansa Fuze seems to have rather spotty USB performance for Linux users based on what I've been able to find on the internet. I got one brand new a few weeks ago, and it half worked for me. By "half-worked"ean it would show up eventually (maybe after a few seconds delay, or after running lsusb multiple times), and sometimes it would suddenly disconnect (tons of bad block messages in dmesg) and come back a minute or two. In any case it was definitely not the nice reliable behavior one sees from normal USB flash drives, which is what MSC is supposed to be. This went on until I decided to rockbox it.
The installation went well using the RockboxUtility, but the USB recognition seemed (by my impressions, not hard data) to become even more spotty, so I decided to remove Rockbox (using the same utility), and did a manual firmware upgrade to the latest version (by copying the extracted fuzpa.bin to the root of the Fuze filesystem) to get rid of the Rockbox bootloader. Ever since then, the Fuze has stopped being recognized anywhere, although it retains its ability to charge from USB ports. Windows 7 is completely unaware when I plug in the Fuze. In Debian, sometimes I can coax the Fuze itself to show the Connected screen, but the system doesn't realize it and the most I ever see in dmesg are lines about new Sandisk device followed immediately by a line about USB device disconnect.
At this point I don't really know what to do so I am asking for suggestions of any kind.
One idea I had is to redo the firmware upgrade, but the catch is upgrading the firmware requires USB access. Is there a way (maybe using mknod or some kludge) to manually create a /dev/sd? device for me to mount the filesystem? If it matters I use thunar's volume manager handle usb devices. On the Fuze I've always used MSC mode
EDIT: an update
I started a watch 'dmesg | tail' going and then plugged my Fuze in and got the following:
(Note the time delay between the first disconnect line and the unable to enumerate
[code]...
It worked fine with the base install of 10.4 but somewhere along the way it stopped working and became read only.Autodetect and MTP modes cause only the Fuze to show up in Rhythmbox. However the track numbers are all wrong and some things are garbled. MSC mode, which I used in the past, shows the Fuze and card both in Rhythmbox and on the desktop. However it's in read only mode.
View 8 Replies View RelatedI'm using OpenSUSE-11.4+KDE and have not been able to access my Sansa Express drive. I can pull it up part way, but it acts as read only. I'm not sure what settings I may need to make in the Partitioner to fix this.If I boot into a LiveCD of LinuxMint10-KDE and plug it in it is instantly identified as a "Media Device," and I have access into the MTP section of it I believe.
I prefer using Banshee, but will use Dolphin to manual drop files it I can get the Sansa drive to operate as with Read+Write. I've seen this device listed here at "plug and play" [URL]../HCL:Gadgets#Media_Players
I'm on kubuntu 10.10 and kdenlive 0.7.8 and since the upgrade to 10.10 Kdenlive crashes whenever I import a clip with a segfault.
Here's the dump from console:
File given: true
Color mode changed to 0
File given: true
QWidget::insertAction: Attempt to insert null action
QWidget::insertAction: Attempt to insert null action
Bus:pen: Can not get ibus-daemon's address.
IBusInputContext::createInputContext: no connection to ibus-daemon
[dv @ 0x3219fa0]Estimating duration from bitrate, this may be inaccurate
[dv @ 0x31564d0]Estimating duration from bitrate, this may be inaccurate
[dv @ 0x3204600]Estimating duration from bitrate, this may be inaccurate
[dv @ 0x3219fa0]Estimating duration from bitrate, this may be inaccurate
[dv @ 0x31564d0]Estimating duration from bitrate, this may be inaccurate
[dv @ 0x3204600]Estimating duration from bitrate, this may be inaccurate
Diverting av_*_packet function calls to libavcodec. Recompile to improve performance
Last message repeated 1 times
swScaler: pal8 is not supported as output pixel format
KCrash: Application 'kdenlive' crashing...
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi from kdeinit
sock_file=/home/jason/.kde/socket-denpc/kdeinit4__0
QSocketNotifier: Invalid socket 11 and type 'Read', disabling...
[1]+ Stopped kdenlive
somebody gave me a dvd of my little music group, and i used a ubuntu application to edit out two clips (i think i used avidimux--it was about a year ago). it produced a clip in avi format, which is not accepted by anything. i'd like to upload it to my facebook or even videos, but need to convert it. i've tried about everything, but have had no success. i just downloaded winff and tried that. the conversion window produce a lot of information ending with "unknown encoder 'libx264'," whatever that means.
does anyone know how i would convert a clip from avi to mpeg4? it's driving me nuts.
Rhythmbox can see my Sansa Clip+ but not music on it. When you have a look at the Sync options the Music, Podcast etc are all empty but it also shows Other !.2 gb which must be my mp3 files.
How can I get them into the Music file and to show up in Rhythmbox.
I am rather a new user of ubuntu.. I tried playing songs and it played properly after it installed the necessary softwares.. But when I tried playing videos, the video clip opened and then closed again.
View 1 Replies View RelatedI just installed 10.04 Ubuntu and allow the Manager Updates.
Movie Player and PitVi apps seems to disappear when I load a clip and enlarge the window.
Movie Player will allow a smaller window and the clip to be played but once I stretch the window, it disappear Nope, its not as though I "floored" that window. It's gone.completely.
PiitVi, when loading a clip, once its full loaded, it disappears.
I did try installing and re-installing but same results.
When I try to connect to the internet wirelessly with Fedora 14 it tells that the wirless firmware is missing. Is there anywayI can fix this or find the firmware for a Dell Wireless 1379 Wlan mini-chip? The Chipset is BCM4315Also my computer is a Dell Inspiron 1545
View 3 Replies View RelatedI installed Rockbox and i just can't get it to work on my mp3 player. I have a sansa clip + mp3 player.I dragged two files to the player's folder. they were supposed to work on my sansa clip +. One of the files was a boot file i think it was mb..
View 1 Replies View RelatedI tried to implement the solution given at: [URL] on a Dell Inspiron 1525 laptop, running Ubuntu 11.04. However, I still can't connect to wifi.
I can see that the files were extracted inside /lib/firmware/ (I see a b43 and a b43 legacy folder).
The lspci -vnn | grep 14e4 returns:
Code:
0b:00.0 Network controller [0280]: Broadcom Corporation BCM4312 802.11b/g LP-PHY [14e4:4315] (rev 01)
I have two seperated video clips, that captured same event from two cameras. i would like to create one clip, that will show one on the left side, the second on the right side, and play together.
View 8 Replies View RelatedI just now down loaded firmware-brcm80211, I want to put it on a usb stick, so that when I am installing debian, and it asks to insert the "medium" that has the driver, I have it on a usb stick.
My question, do I just copy the package to the device(usb stick), or do I need to extract it onto the stick ?
I have just installed 505 on an old laptop, and it's running sweet, I'm trying to get the builtin wireless lan to work and have downloaded the atmel_at76c506.bin driver but I'm not sure what to do with it at this stage, have installed network-manager too,
View 3 Replies View Related