I've been using a Sansa Clip as my portable music player, since it can play ogg files, and with 64 bit F12 I've been able to transfer music back and forth fromthe Clip to my computer via usb port. There seems to be an issue with F13 not recognizing when the clip has been plugged into the usb port.
View 10 RepliesI just upgraded from 9.10 x64 to 10.04 x64 on my desktop. My Sansa Clip+ (USB mass storage mp3 player with SD card slot) stopped auto mounting. It worked fine in 9.10.
dmesg:
Code:
[ 56.290051] usb 1-5: new high speed USB device using ehci_hcd and address 4
[ 56.360222] hub 1-0:1.0: unable to enumerate USB device on port 5
[code]...
I can not get my desktop running Ubuntu 9.10 to recognize my SANSA clip music player. When I plug it in (nothing), No icon on desktop, nothing in Nautilus. I've verified the USB ports are working by plugging in thumb drives and my I-pod.
When I hook the SANSA to my wife's laptop running Ubuntu 8.04 it works great no problems. I must have a setting wrong on my computer, but have NO idea how to fix it.
I've always had trouble with Banshee recognizing media devices. Right now I have a Sansa Clip+ which I'd really like banshee to recognize. Unfortunately it wont at all.
View 1 Replies View Relatedmy Lucid lynx doesn't mount my mp3 player,its already setup in USB-MODE as MSC , but it doesn't show it in desktop, or media folder, or mnt folder or under file system my usb is detected
this is my lsusb output:
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 046d:c018 Logitech, Inc. Optical Wheel Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]...
I am trying to connect a Sansa Clip Zip with rockbox firmware. Debian does not recognise/automount the drives (4gb of internal mem and 32gb sdhc card) whereas Mint 17 had no problem with them.
Are there additional libraries needed? I believe the filesystem is FAT32 rather than anything more exotic so not sure why it doesn't recognise the drives. The clip zip charges but doesn't mount.
Last week when I was still running Lucid I could get Banshee to read and write to my Sansa Clip Plus fine, but now that I have upgraded to Maverick Banshee can no longer see it.
I have it set in MSC mode with an .is_audio_player file (that worked back in Lucid) and Rhythmbox can see it and read and write to it fine. Has anyone else encountered this problem or does anyone else know what might be causing it? Banshee's version is 1.7.6 and the contents of my .is_audio_file are posted below:
Code:
audio_folders=MUSIC/,PODCASTS/,AUDIOBOOKS/
output_formats=application/ogg,audio/mpeg,audio/flac,audio/x-ms-wma,audio/aac,audio/mp4,audio/audible
input_formats=application/ogg,audio/mpeg,audio/flac,audio/x-ms-wma,audio/aac,audio/mp4,audio/audible
folder_depth=1
playlist_path=PLAYLISTS/%File
playlist_format=audio/x-iriver-pla
First some background info:The Sansa Fuze seems to have rather spotty USB performance for Linux users based on what I've been able to find on the internet. I got one brand new a few weeks ago, and it half worked for me. By "half-worked"ean it would show up eventually (maybe after a few seconds delay, or after running lsusb multiple times), and sometimes it would suddenly disconnect (tons of bad block messages in dmesg) and come back a minute or two. In any case it was definitely not the nice reliable behavior one sees from normal USB flash drives, which is what MSC is supposed to be. This went on until I decided to rockbox it.
The installation went well using the RockboxUtility, but the USB recognition seemed (by my impressions, not hard data) to become even more spotty, so I decided to remove Rockbox (using the same utility), and did a manual firmware upgrade to the latest version (by copying the extracted fuzpa.bin to the root of the Fuze filesystem) to get rid of the Rockbox bootloader. Ever since then, the Fuze has stopped being recognized anywhere, although it retains its ability to charge from USB ports. Windows 7 is completely unaware when I plug in the Fuze. In Debian, sometimes I can coax the Fuze itself to show the Connected screen, but the system doesn't realize it and the most I ever see in dmesg are lines about new Sandisk device followed immediately by a line about USB device disconnect.
At this point I don't really know what to do so I am asking for suggestions of any kind.
One idea I had is to redo the firmware upgrade, but the catch is upgrading the firmware requires USB access. Is there a way (maybe using mknod or some kludge) to manually create a /dev/sd? device for me to mount the filesystem? If it matters I use thunar's volume manager handle usb devices. On the Fuze I've always used MSC mode
EDIT: an update
I started a watch 'dmesg | tail' going and then plugged my Fuze in and got the following:
(Note the time delay between the first disconnect line and the unable to enumerate
[code]...
I have a numbe of music files in the ogg format, and they work fine on my Sansa Fuze.However, I recently used soundconverter to convert some flacs to ogg. These files are not showing up in the Sansa's menu once they are copied over.One thing I notice is that the file properties display as Type 'Ogg Multimedia File' for the ones that work, whereas the ones from Soundconverter display the Type 'Ogg Audio'
View 1 Replies View RelatedI've just completed an upgrade from Fedora 8 to 10 to 11. I'm using a Gigabyte GA-G33M-DS2R/S2 MB with the intel G33/G31 graphics chipset. I've never been able to get a valid xorg.conf file with this card. The monitor is being recognized correctly, but when I go into system-config-display and select intel nothing happens. And when I manually edit xorg.conf, X won't start.
[code]...
I have downloaded and installed ICAClient-11.100-1.i386.rpm from [URL] on my Fedora 14 x86_64
npica.so gets installed in /usr/lib/mozilla/plugins/
After activating "mozilla-plugin-config -i" as root, the Citrix plug-in is not listed in Firefox aboutlugins window.
"mozilla-plugin-config --check" gives nothing
Output of "mozilla-plugin-config -L" :
EXCLUDE_WRAP:
libtotem*
libjavaplugin*
gecko-mediaplayer*
mplayerplug-in*
[Code].....
Fedora 13, 64 bit. I have 9 cell Dell Studio 1555. However, it shows a battery time equivalent to 6 cell one. Works fine with Windows 7. Recebtly upgraded the BIOS as well.. No effect.
View 5 Replies View RelatedI have this Core 2 Quad Q6600, recently upgraded myself to 4 GB DDR3. The OS installed is also 64 bit version, I somehow dont manage to see all of 4 GB as installed RAM on the system.
Anything that needs to be done ?
The same is the problem with the dual booting windows, but that is 32 bit and I expect that to happen anyway. Is there this same problem with Ubuntu too ?
I am trying to install skype on a 64bit Fc14 and the 32bit doesn't work.
View 8 Replies View RelatedDownloaded from here: [URL] then ,it is 32-bit and I need to know what all 32-bit libs are needed as dependency for skype to work. I am on Gnome Fedora and purposefully selected static version of skype to prevent installation of libqt4.
View 2 Replies View RelatedI have the simple fortran codes as:
Code:
integer :: i1=2455121, i2=2455121
real :: s1=0.19123840, s2=0.20749992
real*8 :: a1, a2
a1=i1+s1; a2=i2+s2
[Code]....
When s1 and s2 are stated with 'real*8', the 64bit and 32bit systems get the same results.
I just bought sony vaio laptop(EB16) couple of days before.I had window 7 OS. Two days before i downloaded Fedora-12-x86_64-DVD & installed in my PC.Everything is working fine except when i play any video or audio file such as .avi, .mp3 from any player such as vlc player, movie player ,xine etc , i don't get any sound.I tried to search this problem in internet but still i am not able to resolve this problem.
[Code]...
Im trying to set up my 3G modem to recive and send sms but I had no luck so far
Code:
Bus 002 Device 010: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF636Im I tried with gnokii and wammu and many other things and did not want anything to do
Can anyone get the website below to work correctly with Firefox 3.5 and F11 64bit?[URL]...All I see is the background scrolling slowly and jerkily, none of the buttons at the bottom work. Reboot into Windows 7 and IE8: the same site is fast, smooth, the buttons work and the product details appear correctly in the centre of the screen.
I've tried disabling all adblock /pop up block options, ensured all javascript options are enabled and no change. Could this be a problem with the 64 bit flash player (installed from leigh's sticky thread) or a problem with OpenJDK?
Only asking if there is any official NVIDIA drivers for 64bit of fedora ?
And, What is the best alternatives ?
Also, What is the best graphics card to use with Fedora 64bit so i buy it ?
Edit: now working, thanks very much Leigh and Dangermouse.
Anyone successfully installed AIR and iPlayer on F11?
I've switched to 32 bit Adobe flash, tried Autoten for AIR and Dangermouse's advice for iPlayer: url.html but it's not working, and trying to install AIR from url results in an endless busy downloading graphic .
I assume my problem is a lack of required packages, though I searched the repositories using YUM extender for the packages listed here: url.html and can't see them either as installed or available.
I want to install IBM Lotus Symphony on my 64 bit system, but yum only finds 32 bit version.
View 14 Replies View Relatedi have a asus K8N-DL MB with 2xAMD64 opteron270 and 4G ram3x1TB drives in raid 5 using onboard SIL controllerand 2 SATA drives also on SIL but not raidedhad previously had F10 64 bit loaded whick workedtried to upgrade and failed (destroyed data)tried a fresh install low level formatted the 3x1TB and made them into raidleft other drives as is
takes a long time to boot into the point of trying to find HDthen nothing found
As i just started to write scripts, i'd obviously like automize some actions, therefor i'd like to check the users system if its 64bit. Is there a function to check this?
were's a good start to get into bash scripting, the files i use as template gave pretty much good info, but yet i have no idea what i'm actualy doing
Iam trying to install F15 64bit but I failed my hardware as folow
mb : asus m5a88m
cpu: amd phenom ii x6 1100t
ram: 8 gb 2x4gb Kingston 1333
hdd : wd 1tb sata3
wd 1tb sata2
vga: ati 4250 b/in
installation media: downloaded dvd image burned the image installed correctly inside vmware and work as expected but the media boot to the first screen quistion and when press ok for new installatin the answer is a serious of errors messages (a lot of it). did my hardware not compatible??
I have Intel Pentium Dual Core E2180 / 2 GHz processor. i just upgraded my system with 4 memory sticks i.e. 7GB of RAM due to my requirements. Now the issue that i am facing is that my 32bit fedora system does not showing and suppoting more than 3.XX gigs of RAM when i consult "/proc/meminfo", "free -m" and "top". Now i have done two thing, first i have installed a PAE version of kernel. In result of this my system become two slow with the following error at startup. Error: starting udev: wait timeout. will continue in the background <Failed> Secondly, i installed a 64bit version of Fedora 10 but still it showing not more than 3GB of memory. Also a kernel bug system alerts me of not supporting more than 3gigs of RAM and ask me to send that bug to[URL]
View 14 Replies View RelatedToday I got update notification. I type in terminal yum update, and get this error: Quote: Error: Missing Dependency: libnetfilter_conntrack.so.1()(64bit) is needed by package iptstate-2.2.1-5.fc11.x86_64 (installed) You could try using --skip-broken to work around the problem You could try running: package-cleanup --problems package-cleanup --dupes rpm -Va --nofiles --nodigest
I removed iptstate.x86_64, again run yum update, and than, ibnetfilter_conntrack got installed. I tried to install iptstate.x86_64 again, but i get Quote:
[Code]...
I have an 8gb Sansa Fuze, filled with mp3s only. Although it appears in rhythmbox, the songs don't. Plus I can't even access it as a hard drive I've been using it with Winamp when I was still using XP, if that matters.
EDIT: seems like it was in MTP mode by default when 'Auto Detect' was set. I switched to MSC and I can now access it but the music still does not appear, whether in Rhythmbox or in the folder 'MUSIC'.
I can't load any music from my Sansa MP3 to rhythmbox. Is there a better music program to download? Also, cannot play DVDs
View 1 Replies View RelatedI just upgraded to 10.04 and now my Sansa Fuze does not get mounted. The Fuze screen says connected and then writing, but then locks up.\ I have to disconnect it and do a reset before I can use it. I did get an error message on from Ubuntu. As I recall it looked like this:
DBus error org.gtk.Private.Remove Volume Monitor.Failed: An operation is already pending Anybody else tried to use their Fuze with 10.04?