I finally installed Squeeze on my laptop and found out that the XF86Audio multimedia keys do not work.
When I press them, they're correctly identified by xev but they do not produce the desired effect (raise/lower/mute volume, play/pause/stop/prev/next song in media players like Sonata).
Funnily enough though, they do work in Audacious, which has its own plugin to manage XF86Audio media keys.
So it's like the action of pressing these keys is not intercepted by the system and no event is triggered.
I think this might be due to a missing package or configuration but I have no idea where to look...
I just ran one of my weekly upgrades last night (I'm using sid with the 2.6.32-5-686-bigmem kernel). Now compositing no longer works with kde (4.4.5). When I click "resume compositing," I get a message saying "Compositing has been suspended by another application." I'm using the radeon driver. My middle mouse button also stopped working after the upgrade, i.e., I can't use it to copy and paste; can't open new tabs in any browser using the middle button. (The mouse works perfectly in my other two computers, both of which still have kde 3.5.10 installed.) None of these problems existed before last night's full-upgrade, so the upgrade definitely broke a few things, and I don't know how to fix them.
glxinfo | grep render says direct rendering is working. But when I run glxgears, I only get text output, without the animated gears. The results from 'glxinfo | grep -i opengl' say "OpenGL renderer string: Gallium 0.4 on AMD RS880.", and Im guessing that Gallium is causing my compositing problem. Would this also explain why the middle click on my mouse no longer works? Does anyone know how I can get compositing working again, and my mouse?
I have a Dell 1525 and I just installed Ubuntu on it. The Multimedia keys (previous, stop, play/pause, next) and volume control keys (mute, increase, decrease) buttons aren't working at all. Is there anyway I can get them to work?
And today when I booted it up again I found the desktop didn't work anymore. There's nothing on the desktop but the wallpaper, all icons have disappeared and I can't click or select anything. The top and bottom panels still work though.This is the list of packages I installed and upgraded according to /var/log/apt/history.log are:
I upgraded from wheezy to jessie, but now I just boot to a console. I've gone through and made sure all packages are up to their latest versions, and I've made sure gnome, xorg, and xserver-xorg are reinstalled (during the upgrade they got uninstalled..).
Here's what happens when I run startx manually:
Code: Select allcharlie@asimov:~$ startx X.Org X Server 1.16.4 Release Date: 2014-12-20 X Protocol Version 11, Revision 0 Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[Code] ...
Note also that this whole time, gdm3 has been running:
I have used a quite obscure device called Cideko AK0b [URL] .... for quite some time now and it has worked perfectly for almost 2 years now, both in Wheezy and in Jessie. However since I made an dist-upgrade a while back the mouse has totally stopped working. The system works through wifi - strangely enough - but everything else works. Keyboard and gamepad buttons. The manufacture says the things doesn't work on linux and so far I have proved them wrong.
But now the mouse is just out right dead no matter what I do. Have looked into mouse autosuspend but no avail so far. My suspicion is systemd but that is as good as any guess.
Running 3.14-2-amd64.
This is my dmesg.
Code: Select allroot@cryptserv:/home/dencrypt# dmesg | grep Cideko [ 3.158099] usb 6-3: Manufacturer: Cideko Inc. [ 3.469194] input: Cideko Inc. AK08b Device as /devices/pci0000:00/0000:00:12.1/usb6/6-3/6-3:1.0/0003:20E8:5860.0001/input/input2 [ 3.469329] hid-generic 0003:20E8:5860.0001: input,hidraw0: USB HID v1.10 Keyboard [Cideko Inc. AK08b Device] on usb-0000:00:12.1-3/input0
I have two computers running Debian Squeeze. I'm trying to set up the public keys for them so that I don't need to use passwords to log in. As far as I know, I did the same thing for both, however only one is working.Here is the connection output for eachBroken:
Code: OpenSSH_5.1p1 Debian-5+b1, OpenSSL 0.9.8g 19 Oct 2007 debug1: Reading configuration data /etc/ssh/ssh_config
apt-get suggetsed I should remove some packages I was no longer using. I've read the threads that explain this, but unfortunately I did that just now, not when I actually ran the damn command. I must say, however, that there were lots of things I wasn't actually using, so it was useful in a way. But there is a problem:
I have a Dell Inspiron 1525 and to get my sound keys working (the mute, volume up and volume down keys) I had to go to Settings-->Regional & Accessibility-->Keyboard Layout and there in Keyboard model I chose the option Dell Laptop/Notebook Inspiron 6xxx/8xxx. I know that's not exactly my model, but that made my sound keys work fine. Well, since I did the autoremove thing, that stopped working. I haven't got a clue what library was being used to get the sound keys working.
I have searched the web read every post and still i cant seem to get dual monitors working correctly. I have a notebook and a extra external screen at home. Here is my issues
1) My Desktop background stretches over both screens. 2) My Display seems to think I have dual monitors attached permanently. 3) fn + F4 only blacks out screen for a few second.
get this sorted so that when I plug-in the external monitor it works and when I unplug and reboot it goes back to one screen
I'm having trouble with my keyboard functions on my netbook (eeePC 1005HA running squeeze/sid - specific build being the one available on December 23rd 2009 - hasn't been updated since installation) - specifically, some of the function keys seem to be off - i.e. when pressing Fn+key, only some actually work. The specific ones I'm having trouble with are: Fn+F10 (mute)Fn+F11 (vol. down)Fn+F12 (vol. up)
As far as I can remember, they've never worked; at first I thought it wouldn't be an issue for me, having the volume panel, but the more time goes on, the more annoying it's becoming. Also, as it was a M$ machine at purchase, it has a Windoze key on it, which I'd like to configure to actually do something useful - preferably to open the main menu, if possible - but have so far failed to find any guides on how to do it. (Have Googled on multiple occasions, to no avail.)
I have a Logitech K830 wireless 'Living Room' keyboard for general use under Debian/Gnome. The function keys (F1-F12) operate in conjunction with the FN key. Various multimedia options are alternately available by pressing the function keys (F1-F12) without the FN key.
I want to make the function keys primary (not requiring FN). 'xmodmap -e "keycode 172 = F11"' reassigns F11 as expected, but xev reveals multicode output for some keys that I cannot similarly remap. The (de-tabulated) table shows xev output for press-events. Single F(n) keycodes are followed by the equivalent multimedia keycodes (e.g. F2[+FN] key is also 'Minimize window'[without FN]).
KEY STATEKEYCODE KEYSYM
FN+F1 0x0167 0xffbe, F1 Adjust backlight ---- -- ------, --
After installing Debian 8.2 I tested my multimedia keys and they all are correctly detected by xev and works as expected. Then I start to configure my keyboard. I need to use three keyboard layouts EN, UA and RU. By default I can switch between them using selected keyboard shortcut with following pattern: en→ua→ru→en→ua... But I want to switch layouts independently, using different keys for each layout, for example: qWCapsLock — enable EN layoutShift+CapsLock — enable UA layoutCtrl+CapsLock — enable RU layoutAfter googling and reading different forums I come to following solution (here is documents and discussion in russian). Create files
This works perfectly, but all multimedia keys now not recognized by xev and as result they does not work. I know that I can use xmodmap to map keys, but maybe same result can be achieved by fixing some of the newly created files or setxkbmap+xkbcomp command listed above.
I recently install a Debian 8.0 Jessie on a Laptop Dell latitude E6540 with gnome 3.14+3. But the problem is that it doesn't recongnize my multimedia buttons, I tried some methods but I didn't get results.
$showkey --keycodes volume up -- 115 volume down -- 114 volume mute -- 113
[Code] ....
When I reassinged the keys on Settings>Keyboard>Shortcuts to F7, F8 and F9 it works, but when use the keys volume up, down and mute It doesn't show anything.
The same happens with Fn + Brightness keys, in this case it worked the first time but then stop to work I don't know why..
Yesterday something has happened with power supply, so 2 of 3 PCs has shut down. And now my debian pc doesn't respond to multimedia (volume to be precise) keys, leds also doesn't work. Other keys are fine. Tried xev, but it doesn't respond to multimedia keys either. I have dual boot with Win7 on this machine, and it works fine with multimedia keys.
I believe this is a clue:
Code: Select all[ 22.324109] generic-usb: probe of 0003:04D9:1702.0004 failed with error -110
I'd been trying to get into Linux before I bought it so I figured that I would try to get it onto my new Mac so that I could use it wherever I am. I decided to try Debian Lenny 5.0.3 a whirl after reading about all the different distros available. I've successfully installed it and I can get to it with rEFIt, and I have quite a few things working such as the video drivers and wifi. However, I've had trouble getting it to a level where it'd be usable away from home. Here are the main problems I'm worried about:
1) I installed pommed but I still can't use the brightness keys to change the screen brightness. I'm not sure if there's some other workaround for this?
2) I tried some recommended power management packages (gnome-power-manager) but it doesn't seem to be accessible or functional right now. I don't have any way to control it or get to it that is obvious to me. Is an icon or anything supposed to appear on the task bar when you install or what? Getting some sort of power management on here is important because it gets really lousy battery life otherwise.
3) Being a Macbook, there's no right-click button. Multitouch would be really nice (two-finger scrolling!) but I'd be OK with ANY way to right-click with the touchpad. I have a wireless USB keyboard/mouse combo that works at home at least . . . right out of the box too!
4) I've seen some packages called the Mactel PPA, but they are made for Ubuntu. Since Debian and Ubuntu are so similar, is there any way to make those work on Lenny? I think that if I got those to work, I could fix some of the problems above. Or do I have to install Ubuntu?
5) I just noticed that the sound doesn't seem to work yet either.
I'm using Openbox, and I'm working on some scripts to automatically change several things at once (wallpaper, theme, idesk icons, wbar, etc), and I've started with a simple script for changing the wallpaper. I have three different scripts, each one connected to a different wallpaper. The scripts are in my /usr/bin file, so I just have to type the script name and it goes. Trouble is, I've tried assigning it to a keybinding in Openbox's rc.xml, and I can't seem to get them to work.
It's supposed to make it so I type ctrl+F10 to switch to a steampunk wallpaper I have. I can do the script from the command prompt, but I can't get the keybinding to work. Anybody know why? Will Openbox not allow for scripts to be in the rc.xml file?
I just upgraded from 8.10 to 9.10 and now my sound doesn't work (note: I don't know if sound was working on 9.4, since I only ran that long enough to upgrade again) Sound was working just fine under 8.10, and I just tried booting up with a livecd I had handy, which is 8.04.1 and sound worked right off the bat, no problems.I've checked the volumes on everything, including the master volume which WAS initially set to 0.Sadly, turning that up did nothing.The Pulseaudio Volume Control app seems to think nothing's wrong- it's picking up the sound from various applications just fine, the volumes are all on, etc. (aplay lists my soundcard fine:
**** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: VT1708B Analog [VT1708B Analog] Subdevices: 2/2
After upgrading to Lucid Lynx I can't get Gnomad2 to work with my Creative Zen X-Fi. I used to get it to work by running Gnomad2 as a super user, but now the program quits itself when trying to get the songs from the device claiming a segmentation fault.
Code: Device 0 (VID=041e and PID=4162) is a Creative ZEN X-Fi. Queried Creative ZEN X-Fi Segmentation fault
I updated my ubuntu today from 10.04.1 to 10.10 and my microphone stopped working. There is no connector option in the input tab to choose the microphone. I checked everything in alsamixer and still nothing. I had no problems in 10.04.1.
The problem i'm having is that my microphone stopped working after the upgrade to 10.10. Ubuntu doesn't seen any sort of input device any more, no line-in , no mic ( front as back ).Own on to the specs of my machine:It has a realtek ALC861-VD audio chip.2 mic jacks, 1 line-in , 2 out (front and back) and a coaxial port thing .The os is a upgraded from 10.04 to 10.10 and everything except this and my tv card sound works.I have pulse audio tools and alsa mixer ( although it broke during upgrade ) installed.alsa info is available upon request, so is any other info may you need it.
After running a dist-upgrade (from stable to testing) KDE stopped working, all I get (after login in with lightdm) are the modals you can see in the attachments [1]. I do not think it is an X issue, because I can login using lightdm (and MATE is working fine).
I suspect this is because I had KDE installed before running the upgrade. The things I tried so far are:
- Runing "apt-get remove kdelibs-bin kdelibs5-data" . Then "apt-get autoremove". I did it to remove every KDE related package, after that, I ran "aptitude purge '~c' " to clean all config files. And finally "apt-get install kde-standard" to get KDE again. - Removed .cache, .config and .kde folders. Also removed .lock files in .config folder, as I saw somewhere. - Looked for some log files, but I could not find anything (I don't even know where to look really )
This is almost a fresh debian install so I don't mind breaking things, but I would like to get KDE working.
I am using debian squeeze and did an aptitude upgrade yesterday. Today I've found that VLC won't play any video; the files open and the audio plays, but the video is black. The aptitude log is below.
I note that VLC received a security upgrade a few days ago, but my suspicion is that the source of this problem is more likely to be the upgrade of libavcodec52 from version 4:0.5.2.6 -> 5:0.6.1+svn20101128-0.2. I believe this upgrade came from the debian-multimedia stable repo I have enabled.
Does this sound right, and what could I do to fix my VLC playback? This is new territory for me, and I'm slightly surprised that such an upgrade would come from the stable branch of debian-multimedia (although I know this is not an official source).
I just upgraded to karmic the other week and now my webcam isn't working anymore. here is my dmesg output
[Code]....
the last two lines are added whenever I try to run mplayer or skype on the webcam. We are currently using uname -r: 2.6.31-19-generic (64 bit), but the problem was the same on 2.6.31-17-generic
My internal mic on sony vaio was not working on karmic 64bit. After I followed these instructions [URL] (updated alsa to 1.0.22) I got the microphone working, but now mplayer does not play any sound (although it plays files), as it tries to use pulse by default. However when run with -ao alsa, it works fine.
Other than that, the volume control has not effect on the sound, so every time I need to control it using alsamix.
When I remove pulseaudio, everything seems to be working, except gnome-volume-control and gnome-volume-control-applet do not start, and the keyboard volume controls dont work.
Here are the sound cards I have:
Code: progre55@progre55:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC262 Analog [ALC262 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0
my sound was working fine until i've updated the kernel this morning through update manager. Now my sound doesn't not work, despite the sound card appears to be normal on sound preferences.
Wakeonlan was working just fine with Wheezy on this machine. After upgrade, wakeonlan will resume from suspend but not from shutdown.
I have no problem with other machines (same software setup) after upgrade. None of my other machines have a broadcom NIC.
No BIOS settings were changed during the upgrade. If I enter the BIOS on boot and make sure settings are correct then 'save' and shutdown, without booting to debian, I can then successfully wakeonlan. Then, if I do not boot debian, but shutdown before debian starts, I can wakeonlan successfully again.
If I boot debian and then shutdown, game over: wakeonlan nolonger works.
$ ethtool eth0 | grep -i wake Supports Wake-on: g Wake-on: g
Recently I installed MPlayer with its default gui and its interfaces SMPlayer and GnomeMPlayer. When I'm using GnomeMPlayer it responds to multimedia keys as configured in Gnome shortcuts, even if it's minimized or running in another virtual desktop. But it doesn't happen to the other two gui's mentioned above. I have also noticed that native Gnome applications or with Gnome support like Banshee and Rhythmbox rspond to multimedia keys even when the gui is closed and they are running only in the system tray. But it never occurs in non-Gnome applications like VLC, MPlayer and others. Jetaudio wich responds to these keys in MS Windows running under Wine doesn't even recognize them.
So I came to the conclusion that only native Gnome applications or with Gnome support recognize multimedia keys because, as it seems, they receive the signal from Gnome configurations. Others applications doesn't do so. Here is my question: Is there some way to make all applications recognize the configuration of Gnome multimedia keys shortcuts? (Of course it would not be fine if they recognized ALL Gnome shortcuts because they could conflict with shortcuts from another applications. The idela would be that they recognize ONLY Gnome multimedia shortcuts.)
I just upgraded to 10.4 lts, and compiz stoped working. EDIT: lspci | grep VGA gives me:
Code: 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03) If I try to run it from terminal i get: Code: Xlib: extension "GLX" missing on display ":0.0". Xlib: extension "GLX" missing on display ":0.0".
