Software :: TV Tuner Card Connected To CCTV Camera - Segfaults?
Dec 4, 2010
I have a tv tuner card connected to a cctv camera for streaming, all works good in tvtime, cheese used to work but then I changed the resolution to a lower one and now it segfaults, purged reinstalled same issue, also I tried with mplayer, mencoder, mythtv (coludn't find any signal on the input) and camorama.
Code:
mplayer tv:// -tv driver=v4l2:input=1:channel=1:width=768:height=768:device=/dev/video0
And it displays lines through everything but I can see the messed up image, I believe this is due to the current input format being YVU420, I was able in another program to verify this by changing the input codec to yvuv i think it was, how do I change the in mplayer, mencoder, camorama has this bug too, how to change this setting ut codec in mplayer and mencoder, also canorama has this issue, but I can actually see everything, b/w and with lines through it. I am just trying to record video to AVI.
View 3 Replies
ADVERTISEMENT
Nov 11, 2010
8.04 permissions. I have had ubuntu 8.04 running Zoneminder 1.22.3 for over 2 years with a capture card and cctv cameras. I just bought a Trendnet IP512p camera. My zoneminder box will not connect to it. The main error I get is, [Restarting capture daemon for ipcam, shared memory not valid], I am wasting time with shared memory settings. I just booted a live cd of 9.10 with Zoneminder 1.22.3 that I remastered from another system and the IP camera works fine. (It ran all night in the live environment.) From that test I have concluded I have a permission problem in my 8.04 install that is not letting www-data (the ZM process) access what it needs to grab the stream. From the same box I can stream the camera to firefox while using vnc to connect to it.
View 4 Replies
View Related
Aug 21, 2010
I need to get software for viewing my shop cameras from my laptop with wwan card. I have an ADT 8 camera DVR and a Motorola Netopia 3347-02 router from AT&T. My shop computer is running Windows 7 with RASPlus for viewing locally. I have a Dell Lattitude D520 laptop with Knoppix 6.2 and a WWAN card. What software do I need to view the cameras from the road? What do I need to do to get past my router? I hear that Zoneminder is not good enough to handle the 8 cameras.
View 6 Replies
View Related
Dec 13, 2010
Has anyone gotten a DVR card to work with Zoneminder? I have a chinese DVR card in a Windows Box running 8 Cameras on software called SuperDVR. It seems all of these camera cards are the same, some made by Avermedia, or QSee. My card actually came with SuperDVR software that didn't work properly, the documentation was obviously bad chinese translation and I had a really tough time getting it to work on the Windows box initially. Finally I found that it just won't work with Windows 7 or 64 bit, so I reinstaled WinXP 32 bit onto the box and found an upgraded SuperDVR software on the QSee camera driver website. I've started using Ubuntu exclusively and would love to make the switch to Ubuntu for my Camera box. I'm wondering if Ubuntu will recognize the camera card. It's basically a TV tuner card, has 2 plugs that allow BNC pigtails to be input.
I was even thinking maybe running Virtual Box ontop of Ubuntu and run the DVR in Virtual XP. I'd really like to take advantage of the 64 bit hardware, so I was thinking about running Ubuntu Server 10.10 64 bit on this machine, is that a bad idea?
View 9 Replies
View Related
Sep 20, 2010
Ubuntu 10.04. In order to get my photo application (digikam 1.2) to download photos off my digital camera/SD card I have had to configure Ubuntu not to 'mount' the usb connected camera when it is plugged into the pc. I can use digikam to download pictures off the camera/SD card into the pc. I'm having a problem when it comes to deleting the original pictures off the sd card/camera. Googling this problem it seems the issue is around Ubuntu only having read access to the SD card. It appears in windows world when an sd card is presented one has read/write access so things tend to 'work out of the box'.
In Linux/Ubuntu world I'm reading that digital cameras/SD cards do not (always?) work out of the box because you only have read access. If I close down digikam and launch nautilus I can see the camera/SD card but cannot write to it - I'm told I only have read access. I have also convinced my father-in-law to switch to Ubuntu but at the moment although he can download photos and view them I see no way of (ideally through digikam) of deleting the pictures off his camera/SD card.
View 9 Replies
View Related
Feb 27, 2011
I am trying to resolve an ongoing fight involving /dev/video node assignment between 2 TV Tuner cards and a USB video camera.
Each time I reboot the three devices seem to shuffle their /dev/video assignment. i.e. what was /dev/video0 (USB camera) after a reboot magically becomes /dev/video1.
This causes all kinds of grief between my MythBackend and ZoneMinder who expect the devices to have static assignments.
how to best solve this? I did a brief search and one solution appears to be to statically assign the devices.
View 3 Replies
View Related
Jun 21, 2011
I'm giving windows 7 a break and have a fresh, updated install of opensuse 11.4. The problem I have is that when I plug my samsung galaxy S2 in I can't view the pictures I've taken with the camera.I get the popup box saying camera and giving me the option to view with gwenview, digikam and filemanager. Now i can see the folders including the DCIM folder that the images are stored in but it's empty?
View 6 Replies
View Related
Jun 27, 2010
I got a vaio vgn-ar21s laptop that under yast reports to have a tv card: saa7131/saa7133/saa7135 Video Broadcast Decoder
However if I try to choose a tuner (bottom on the right bottom of the yast window for Manual TV card selection, I get "No tuner is available for the selected card".Can this be set up somehow under opensuse 11.2 ? I am running kernel 2.6.31.12-0.2-desktop x86_64
The card works under windows (I can see most digital tv channels [I am in the UK]), but I would prefer to use it under opensuse, of course.
View 2 Replies
View Related
Apr 1, 2011
I haven't had one for years, so i am not even really sure what options to look for. So i need to be able to stream media, record media, record cable box, play cable box, listen to local FM radio would be really nice.
View 1 Replies
View Related
Dec 13, 2008
I am needing a tv tuner card that is compatible with linux. My tv went out so i need to be able to hook up my directv receiver to the card.
View 10 Replies
View Related
Mar 11, 2010
If my webcam is plugged in when I start up my computer, it ends up being the only thing I can use -- I can't switch off of it in tvtime. If I leave it unplugged and restart my computer, I can then use my TV tuner card.
View 1 Replies
View Related
Nov 17, 2010
A while ago I reinstalled Ubuntu on my PC when I felt that Windows was about to give up. I'm glad I did. A lot of the applications I had on my Mac had equivalents on Linux, I was delighted and I haven't been needing Windows at all.
Up until recently everything was working fine, but now I think Linux is mixing up my Sound Card with my TV Tuner. When I call someone using Skype, it ends up airing white noise, however, if I've watched TV prior to that, it ends up airing the sound from whatever channel I was watching last. If I turn on the video calling function (despite the fact that I haven't got any webcam plugged in) it ends up airing video from that same channel.
It just started doing this randomly, and as I did some experiments, I discovered that it does this with all audio-input applications. (Sound Recorder etc,)
So I installed Pulseaudio device manager, and I discovered that my soundcard isn't listed under output devices.
View 2 Replies
View Related
Nov 19, 2010
A few nights ago, I was trying to set up a tv tuner card and I somehow ruined my OS. When I log into Ubuntu, all I get is errors and a blank screen. Since it was an older version, I decided to upgrade to the latest version, 10.10. So I figure that I get a live cd, transfer all my wanted files to an external drive, then install the new OS. I got the live cd and when I boot it, I get some picture at the bottom of my screen with some stick figure and what looks like a piece of film, then my monitor resets and says "Out of range" What can I do to fix this problem? I am currently on a Knoppix 2.6 live cd.
View 4 Replies
View Related
Feb 20, 2011
I have 2 tv cards that I have successfully configured to work in linux.But this 3rd one I bought recently seems to have a problem. The card is not autodetcted (that's really not the problem) but when I try to load saa7134 with:sudo modprobe saa7134 card=xx tuner=xx, it loads whatever card I indicate but the tuner never changes. This is part of the output of dmesg:
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.15 loaded
saa7134 0000:02:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[code]....
View 3 Replies
View Related
Feb 22, 2011
Way back in the day when I was running Windows I used a Compro Tv Tuner Card which had nice, easy to use drivers for XP. Now that I'm using Ubuntu, I wouldn't mind getting another Card myself (old one died on me) and was wondering what brand was the most linux friendly so to speak?
View 3 Replies
View Related
Jun 2, 2011
I have a pinnacle 800i that i just setup and video to work which was a pain but now i cant get audio to work.
View 3 Replies
View Related
Sep 1, 2011
I have a sabrent tv tuner card (tv-pcirc). I want to use it in vlc but don't know how to change from the composite source to the tuner source and from there don't know how to change channels (is there a program that generates channels.conf for analog channels?) It would also like to know how to record a certain channel for a certain period via the telnet interface. Another thing I would like to know is how to set up the remote with it, because the audio is very soft and I would like to raise the voume.
My card is using card=42 tuner=43.
View 3 Replies
View Related
Jul 15, 2010
I am using Fedora 13, kernel 2.6.33.3-85. I have a TV tuner card and lspci shows this:
01:0a.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
Which software should I use to view TV on my PC? Also, how should I check that the drivers/modules for my TV tuner has been loaded or not ?
View 5 Replies
View Related
May 19, 2011
Is there anyway I can connect my desktop to a satellite tv decoder and watch the stations from my desktop? I only know tbs 6981 dual tuner card.
View 1 Replies
View Related
May 31, 2011
I'm looking for an HDMI-capable TV Tuner card (that preferably works with linux).
View 9 Replies
View Related
Mar 13, 2010
Has anyone had any success with installing the HVR-950Q TV Tuner card? I am trying it after giving up on the hvr-1500c (15 months trying!).
View 9 Replies
View Related
Jan 31, 2010
How do i install a intex TV tuner card
I am very new to ubuntu and only know to use a little of it.
I have a intex tv tuner card with FM.
how do i add this as my hardware
i wa earlier using windows XP and i also have drivers for XP and inter video Win DVR application for viewing TV on XP.
But on ubuntu how do i see TV and how do i install the card.
View 9 Replies
View Related
Feb 5, 2010
How do i install intex tv tuner card (PCI ver 2.1) on ubuntu 9.01 I have installed myth tv my problem is which card do i select i selected Analog card and MJPG as well but when i go to scan for channels says FAILED TO OPEN CARD.
View 1 Replies
View Related
Dec 24, 2010
I have INTEX TV tuner card. i'm trying to configure in ubuntu for tvtime. The card has the saa7130 or saa7134 philipse chipset.
lspci | grep -i saa713
output:
Code:
00:0a.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
after the installation, the card was detected and /dev/video0 was created but dmesg indicated that the card is not among the ones listed as supported and since card did not have EEPROM, the card was not up and running right away.i have edited /etc/modprobe.d/tvcard.conf and added options saa7134 card=3 tuner=14
Code:
$sudo nano /etc/modprobe.d/tvcard.conf
added:
Code:
options saa7134 card=3 tuner=14
Then CTRL+X to exit
still it did not work. tvtime would always say no signal and tvtime-scanner never picked up any channels. then i followed instruction given by rsramkee [URL]. edited saa7134-cards.c and deployed new kernel linux-2.6.36.2 with changes.i rebooted machine to windows selected one channel in tv tuner software of windows, again rebooted machine to ubuntu (i have dual boot windows XP and ubuntu 2.6.35.23). tvtime able display video of channel that is selected in windows OS (No sound), but not be able to tune any other stations.In mplayer able display video of channel that is selected in windows OS with sound.
command:
Code:
mplayer tv:// -tv driver=v4l2:chanlist=us-cable:alsa:adevice=hw.0,1:amode=1:audiorate=48000:forceaudio:volume=100:immediatemode=0:norm=PAL
i followed instruction given by http://linuxtv.org/wiki/index.php/Saa7134-alsa to set up sound. loading the loopback module with the command:
$ pactl load-module module-loopback
Now tvtime able display video of channel that is selected in windows OS with sound, but not be able to tune any other stations. Not be able to tune any stations.dmesg output:
Code:
[ 1320.568603] saa7130/34: v4l2 driver version 0.2.16 loaded
[ 1320.568697] saa7130[0]: found at 0000:00:0a.0, rev: 1, irq: 18, latency: 32, mmio: 0xdffff800
[ 1320.568737] saa7130[0]: subsystem: 1131:0000, board: LifeView FlyVIDEO3000 [card=2,insmod option]
[code]...
i'm not be able to tune any stations using tvtime and xawtv. if channel is not selected in windows OS for more then 1 hour then tvtime displays message no signal, same message in tvtime-scaner (No sound).
View 1 Replies
View Related
Mar 29, 2011
I have a Phillips SAA7130 TV Tunner card and seems to have installed correctly. I have Xaw TV program on Ubuntu 10.10. I am unable to get the Video. I tried 3 players and in none I am able to see the video. The source in all programs says 'Default' and am unable to choose the card as source. I am also ok to allow remote login to check.
View 7 Replies
View Related
Mar 27, 2011
I have a TV Tuner Card (AverTV Super 009 from AverMedia). I am not able to work with it. My dmesg output is here. [URL]
It says my card number is 180 and tuner 1-42. I have tried all the 42 numbers in the tuner option in the modprobe command (modprobe saa7134 card=180 tuner=1 to modprobe saa7134 card=180 tuner=42). But result is not good. The file CARDLIST.saa7134 in kernel.org displays my device [URL]?
[Code].....
View 1 Replies
View Related
Feb 10, 2010
Ever since installing a 2nd tuner card Kaffeine has become unstable and now it won't run at all. It hangs a few seconds after starting up. If I run it from the command line I get the following (see below).
I'm runing Mandriva 2008.0 Kde 3.5.7, Kaffeine 0.8.5.
------------------error:
$ kaffeine
0
kaffeine: Found DVB device.
/dev/dvb/adapter0/frontend0 : opened ( Conexant CX22702 DVB-T )
/dev/dvb/0/frontend1 : : No such file or directory
[Code].....
View 1 Replies
View Related
Jan 18, 2010
I've been trying to configure this generic remote that came with a TV tuner card (saa7134) a while ago but I haven't been able to do so. The thing is that the remote works, in fact some buttons are recognized properly... but some are not. I'm not using lirc!, from I have been reading there is support for generic remotes in the 2.6.31 kernel, besides, i can't configure lirc, it doesn't let me load the kernel modules to start up the daemon for the ir. is there a config file for the button mapping of the native remote support in kernel 2.6.31?. Been searching it but couldn't find it.
View 5 Replies
View Related
May 18, 2010
Gateway desktop running Ubuntu LL 10.04(64 bit) with Asus/ViXS Combo-210E NTSC/ATSC TV Tuner card: link to card... [URL] Ubuntu lists the card when I do lshw in a terminal but it shows as 'unclaimed'. Is that important? Also what software is neccessary to watch tv? The card works fine in Windows7
View 6 Replies
View Related
Jul 27, 2010
I have an almost noname tv tuner card: Vivanco PCI EASY BG/DK. Lspci says it is Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01). Dmesg detected it as a LifeView FlyVIDEO3000. I tried to configure it making the file at /etc/modprobe.d with the options card=2 tuner=5 (I found that also in dmesg). Still TvTime can't find any channels. I also tried using xawtv and scantv, but only managed to find two channels using ntsc somehow, but I have PAL BG/DK. (the card itself works on Windows, but it took me a while to configure the channels properly)
View 4 Replies
View Related
