OpenSUSE Hardware :: Canon Digital Camera Not Showing Anymore
Jan 1, 2011
I have a Canon S95 digital camera that used to work just fine. I plugged it in, the device notifier showed a couple of actions for it, I chose digiKam and downloaded the photos. Now I tried to get new photos out of the device, but it's not showing in the device notifier any more. DigiKam shows "Canon Inc. Canon Digital Camera (auto-detected)" but doesn't do anything when selecting it.
In dmesg I see:
[ 988.197025] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 988.313730] usb 1-3: New USB device found, idVendor=04a9, idProduct=3212
[ 988.313734] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 988.313738] usb 1-3: Product: Canon Digital Camera
[ 988.313741] usb 1-3: Manufacturer: Canon Inc.
[ 988.313743] usb 1-3: SerialNumber: [number]
So it works but KDE doesn't seem to be able to notice it. I'm using openSuse 11.3 with KDE 4.6 RC1, and it might be that 4.6 betas/rc broke the functionality though I'm not sure.
From time to time I do a bit of astrophotography and time lapse using a canon 350d. To do it properly I have to use a remote capture program on the laptop. This was never a problem on windows or the mac. Does anyone know of a way to control my camera on ubuntu 10.04 netbook edition?
I have installed gphoto2 and this allows a command line method but I dont like command lines for this kind of stuff, plus id like to see the image straight away. I have tried a couple of GUIs for gphoto but the only one which seems to have a capture option is digikam.... but the button is shaded out so I cant use it.
I'm using Kubuntu, but installed Nautilus so I could use Dropbox. Yesterday I plugged my camera and it popped up a window asking what to do, but it didn't list any application, and the only option available was Cancel. Then I couldn't find it anywhere on the system, neither where it was mounted. Today I've turned on an USB hard disk and Nautilus popped up (why? shouldn't be dolphin...?), then afterwards plugged in the camera, and there it was on Nautilus.
But in it's interface I also couldn't find the mount point... I've seen I can add an entry on Dolphin's "Places", but I need the mount point. Is there a way to make Dolphin add the entry automatically? Device Actions under System Settings is a bit confusing... And Digital Camera (also under System Settings) gives "Unable to initialize camera, check your port settings and camera connectivity and try again. Could not lock the device", and indeed, I can't unmount it on Nautilus....
I'm using Samsung ES55 digital camera. As you can see in the above , Kingston flash memory is assigned with /dev/sdb disk (system disk is offcourse sda). My openSUSE 11.2 see's the camera , but the device can't be assigned to it. With opensuse 11.0 I did not have this problem, and camera was mounted normally as any other external device via USB.
I'm trying to get photos off my Canon PowerShot SD1100 IS but while Device Notifier pops up telling me I've attached a canon, and I can see it when I run lsusb, It's not actually being mounted anywhere, or creating a device for itself to be mounted with..I plug the camera in to the computer while it's still off, and I turn it off again before disconnecting (As I've heard this is the proper way to do this.) but I am still not getting a device. I've also tried the following advice (Although I'm obviously on openSUSE not Ubuntu).Ubuntu Forums - View Single Post - Unable to mount camera or import digital pictures.
After installing openSUSE 11.2 everything worked well (instead of wlan working not continuously, but that's not the topic). Now my computer stopped registering the camera (it's a Canon Power Shot A540). I already tried to add it with gphoto in digiKam - the automatic search did not find it - after a manual registration gphoto could not connect to it (although it was plugged and switched on). The order lshal dumped 103 devices from the global Device List The order lshal -m started monitoring device list, but comes to no end
fdisk -l shows me my hard drive with all particions plus a mobile hard drive (connected via USB) but no camera (it's still plugged and turned on) after many hours and reading of many forum threads I don't know any further - can anybody help me find the solution for my prob?
I have a canon pixma mp640. Under opensuse 11.2 64 bit the printer worked (printing and scanning via wifi). I recently reinstalled my system with 11.3 64 bit, and after installing the canon rpms and creating the printer I get the following error in /var/log/cups/error_log:
Code:
Backend returned status 1 (failed) printer-state-message="Illegal backend: Success"
In opensuse 11.2 I needed to create some links:
Code:
cd /usr/lib64/cups/filter ln -s ../../../lib/cups/filter/pstocanonij cd /usr/lib64/cups/backend
I've got a strange issue. I used without problem my Olmypus camera with oS 11.2 and older but sinds 11.3 and the new KDE, nothing happens anymore when I plug my camera: nothing appears in the device notifier, nor in Dolphin. It did in the past, with oS 11.2 and KDE 4.3.x. But, in IceWM, with Dolphin and Digikam it does work (it appears like a USB stick). Not in KDE with the same applications.What I wrote in the bug report:
Steps to Reproduce: 1.Plug your digital photo camera in a USB port 2.Optional: open Dolphin Actual Results: Nothing happens
We've got one of those fancy, modern digital cameras and it's great for taking pictures, but I'd love to back those pictures up, too. When I connect the camera via its USB cable to my computer, the OS just doesn't "see" the camera/connection. Nothing shows up in fdisk -l. However, when I connect my mobile phone or USB HD via the same port, they show up in fdisk and can be mounted without any problem. The scary thing is that on my partner's laptop, running gNewSense (with Gnome), it (auto)mounts without any problems. The camera is a NIkon Coolpix L20 with an SD card.
I have a Samsung Digimax S600 camera that I'd like to use to download pictures to my ubuntu v 8.04 LTS with all the latest updates.
However, there doesn't seem to be an application that will work with my camera. I've tried Camera, gtcam and Digital Camera that gets loaded while installing the version. gtcam and Digital Camera have an option for a Samsun Digimax 800 but none for my camera.
Does anyone know of an application that has my camera as an option.
I'm having some problems with Ubuntu 10.04 64bit finding my digital camera (Nikon CoolPix S4000). For whatever reason, when I plug in the camera via USB connection, Ubuntu will not detect it. The odd thing is that on my old Ubuntu 9.04 32bit install my camera was detected fine (it appeared as an icon on the desktop, akin to a flashdrive or any other mounted drive).
When I plug in my digital camera, it mounts it as a gvfs-mount. I have a few problems with this:
- It takes 2 times: I have to plug it in, wait, unplug it, plug it back in before it shows on the desktop - Don't have command line access: Nothing in ~/gvfs after mount and I cant do anything with gphoto2://[usb....] - Cant access it from another desktop instance: gvfs-mount -l lists it when I'm on a terminal on the desktop, but not when I'm ssh'ed into the system.
Really I just want to mount, rsync photos for backup, unmount and be done with it (all this in 3 lines of a shell script that I'll add to udev so its fired when ever the camera is plugged in)
dmesg: usb 1-5: new high speed USB device using ehci_hd and address 8. Configuration #1 chosen from 1 choice lsusb: Bus 001 Device 008: ID 04a9:3176 Canon, Inc. PowerShot A590
How can I mount it as a normal mount (perhaps something that automatically shows up in /media or something).
Previously I could plug my EOS 20D into the USB and f-spot would pop up and let me import photos. This was on 9.10. The camera is fine, it still does exactly what it did on the machine next to me which is still running 9 (or 8, I forget).
connect your player to Ubuntu and with some magic Ubuntu changes it to a camera But now my 1 gig Philips Shoqbox can not play any music anymore.If i connect it in Xp it is also changed in a digital camera and i am not able to put any music file on it.In Ubuntu i can but the player doesnt see any of the songs.In Xp i cant format the player and can i do it in Ubuntu or Mandriva?Tomorrow i go install a new distro and is it a option to connect the device before i start the installation and format it then?And do i need to format it to fat32?Or is there a simple way to do it in a terminal?
For whatever reason, XBMC refuses to play the audio. Xine plays the audio but with a distressing static noise. MPlayer and Kaffeine play the files fine. The bottom line is XBMC and Xine seem to dislike pcm_u8 audio, or the way the audio is streamed with the video.I also cannot fast-forward the movies with some players, such as MPlayer or SMPlayer.
I haven't found whether I can select a different format with the camera, but to avoid player problems I'd like to convert the videos. My primary focus is playing in XBMC and Xine because I have both apps configured to be controlled with a remote control. What is the most compatible format to convert? This is with 12.2 or 13.0. I have ffmpeg, mplayer, and mencoder installed and probably all or most codecs I could use.
I have a digital camera which does not seem to have a drive, yet can hold around 15 photos. The windows software included with it allows Windows to access the photos, but I want to access them with Ubuntu. It has a USB port.
I have digital camera (Canon EOS 550d) which I connect to my computer using a USB cable. I can see that the camera file system is mounted under "~/.gvfs/gphoto2-XYZ" where XYZ seems to be a dynamic device dependent string that changes every time I connect the camera.The thing is: I need the mount position ALWAYS to stay the same, so my photo management program (Bibble) knows where to download the images from.I am not sure how to do this, but I guess there must be a way to configure GVFS/FUSE or whatever is responsible for mounting the camera to use a fixed mount point (like /media/camera or something).
I bought a cheap digital camera and I am trying to download the pics on it but I must first download the software from cd to be able to view the pics. How do I install the software that is made for windows or is that possible?
On Ubuntu Maverick I wish to choose which application starts when I attach my Canon digital Camera. I seem to remember this choice appearing a long time ago and I chose Picasa. How can I change it to another application? It is not available under "Preferred Applications" as could be expected
When I plug in my digital camera (Canon Elph) it shows up in Nautilus, however I'm trying to write a script that will work from the command line. I don't see the camera in the /media folder, nor do I see it in /mnt. When I browse to it through nautilus it shows up as "gphoto2://[usb:001,008]/" with the "008" changing each time. how do I see my files through bash?
I have overlooked some very important tools that would give me the information I'm looking for. What I'm trying to do is -
Plug in a USB camera find /dev/camera-pseudonym mount /dev/camera-pseudonym /camera cp * ~/pictures umount /dev/camera-pseudonym
and then work on adding this camera to /etc/fstab so that it will automatically mount to the usual place. I don't know how to find the pseudonym. I can, lsusb and see Bus 004 Device 009: ID 040a:05c1 Kodak Co. Digital Camera I can fdisk -l and not see any new partitions (which, with most USB devices with storage, I can usually see the partition listed in fdisk -l) After these two commands related to search FOR the pseudonym, I draw a blank and resort to manually searching /dev for things that may be useful.
This is difficult, though, because there are dozens of files named usb-something, and they're all very similar to one another, and not related to typical pseudonyms I'm used to (like /dev/usb[0-9], /dev/sd[a-z], etc) I would like to be able to find the /dev entry based on the ID 040a:05c1 because every USB devices I've tried has been listed by lsusb, and is accompanied by an ID number.How do I find the pseudonym in /dev for any usb device?
I have sony handycam DCR-HC30E camera. I am interested in connecting it to my Gentoo computer via firewire cable. I`ve connected camera to computer with Firewire cable and turned camera on in VCR mode. What do I need to do for identification camera in linux?
I got this camera today. My PC can't see it. Using USB cable Camera is setup in PC (PTP) mode. Has PC and printer USB modes. I have tried all modes Digikam has generic USB camera profile. Linux dose not see camera even as external device. When I plug camera into PC watching the camera the connection times out. My PC can't see the camera at all.
I have a Canon Powershot A470 digital camera and can't get to transfer the pictures from it on Ubuntu 10.04. When I had Ubuntu 9.04 I imported pictures from the same camera without any problems. I considered that the problem could be the camera itself or the USB cable, but I have just accessed my pictures from that camera using Windows Vista.
Basically, what I have tried is 1) connecting the USB cable to the camera and the computer; 2) set the command button to the playback position; 3) turn on the camera. Using Windows Vista, this series of procedures opens the camera folder (as a flash drive) on Windows Explorer and this is what used to happen when I was using Ubuntu 9.04. I expected this to happen using the Lucid Lynx, but I didn't get even close. I even opened the Home Folder to see if something new showed up there when I hooked up the camera and turned it on.
Since I'm new with Ubuntu (especially the Lucid Lynx), I don't know what I'm doing wrong. I have read that sometimes we have to mount devices in order to get them to communicate with the computer. Is this one of those cases? If so, how do I do it? Does anyone else have the same model of digital camera? How do you guys transfer the pictures to your Ubuntu-based system?
I have a Linux-based PC, running Fedora 13, and am attempting to upload photos from my Soncy Cyber-Shot DSC-W310 digital camera. When I insert the CD that came with my camera, I get the following error message:
Archive: /media/SONYPMB/Install.exe [/media/SONYPMB/Install.exe] End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. zipinfo: cannot find zipfile directory in one of /media/SONYPMB/Install.exe or /media/SONYPMB/Install.exe.zip, and cannot find /media/SONYPMB/Install.exe.ZIP, period.
I spoke with your tech support person, and he indicated that I could press menu, and go to setting and select PictBridge on the USB option, but that does not work either.
I have a Nikon Cool Pix 990 camera which I could access under Fedora 11 (and previous) using digikam and/or gphoto2. However under F12 and F13 it no longer works. When plugged in I get a Nikon Camera icon that the system thinks is a usbfs. However the camera is too old for that interface. If I unmount the device then it shows under usb-devices as having Driver=(none). How can I get it to be recognised as a non-usbfs device ?
I am a Ubuntu newbie (installed Ubuntu 10.04 LTS last week) with a camera problem. My Canon SD300 won't automount when I attach it by usb cable. It is visible to F-Spot and I can import pictures, it just doesn't automount. I saw other posts where no usb automounts were occurring. Not my problem. Memory sticks and external hard drives automount just fine. Only the camera is a problem child.
