I am running the testing version and am fully up to date. When I try to run evolution, I get the following errors in a terminal. When I launch it normally, I don't see any messages, it just never loads.
$ evolution code...
What can I do to debug this and get it working again?
Evolution keeps crashing everytime I send mail. I am also constantly asked for my keyring or email passwords. I checked the log and found this error message.
"CRITICAL **: mail_session_refresh_cb: assertion 'service != NULL' failed"
This message was in a bug report from 2013 that seems to be closed.: https://bugs.debian.org/cgi-bin/bugrepo ... bug=730256
My system : Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u2 (2015-07-17)
synaptic package manager says my evolution and keyring are the latest.
I usually run Xfce if that means anything.
Running it from a terminal, every few minutes this happens:(evolution:25607): libsoup-CRITICAL **: set_ current_request: assertion `priv->cur_req == NULL' failed Segmentation fault..Found lots of cases that mention Gentoo (and Evolution 2.4) and this bug, but nothing with Debian. Bug is apparently due to the version of libsoup that Evolution is compiled against.Install is relatively fresh; about a day old. Packages are the latest updates.
View 1 Replies View RelatedAfter updating recently VLC does not play audio or video, and it does not complain about not being able to do so, even when running from terminal.
The version is VLC media player 1.0.6 Goldeneye.
I have tried resetting the preferences.
I don't know how to troubleshoot any further..
Because I am unable to get "report-bug" to run without crashing, I would like to report a bug in "lxterminal" on Debian 6.0 (Squeeze) running the 486 kernel.When the lxterminal Preferences are changed, they are not saved afterwards (once the application is exited.) I have to change the font size each time, as the default lxterminal screen opens up too small to read.
View 8 Replies View RelatedDebian Jessie
Iceweasel 38.2.0
Icedove 31.8.0
Iceweasel and Icedove spontaneously crash, sometimes individually, sometimes together. Upon restart they will both run, but the amount of time they run before crashing again decreases with each crash. The way to extend use of these programs is to reboot Debian. (I typically run my computer 24/7 to run community service programs.)
How do I get these programs to run without spontaneously crashing?
I got a problem with gstreamer programs and pulseaudio. I am running Debian Squeeze and needed to install pulseaudio to get better bluetooth-headset support. After installing everything every application except gstreamer applications could access the sound server the right way. Even flash and sdl are running via ALSA routing to pulse.
If I start programs running with gstreamer they crash with a segmantation fault. Totem does not start anyway. If I run it in the terminal it crashes immediately with a segmantation error. The debug mode prints out $ totem --debug
(totem:3450): Totem-DEBUG: Received SaveYourself(SmSaveLocal, !Shutdown, SmInteractStyleNone, !Fast) in state idle
(totem:3450): Totem-DEBUG: Setting initial properties
[Code]....
I have installed the gstreamer plugin for pulseaudio and the gstreamer-plugins-good and bad. I started gstreamer-properties and choosed the right output driver. When testing the peep comes out of the right output.
Via google I founded some bugs, that were similiar to mine. But they had made the mistake not to install the plugins. I also can not choose ALSA in gstreamer and do the routing way. The programs using gstreamer simply crashing. I tried exaile. It also crashes the same way like rhythmbox. Is it a real bug? Or can I do something against that. VLC and kaffeine running very well. But I would be sad about not being able to use rhythmbox. I like that fast program. Or is there a way to get rhythmbox tto not using gstreamer?
I use Debian 8 with gnome-shell 64 bit and install chromium and run it in terminal with this command
Code: Select allchromium &
and I see these error
Code: Select allmostafa@mfaridi:~$ chromium &
[1] 1756
mostafa@mfaridi:~$ [1756:1756:0504/111239:ERROR:url_pattern_set.cc(240)] Invalid url pattern: chrome://print/*
[64:64:0504/113111:ERROR:ppapi_thread.cc(278)] Failed to load Pepper module from /usr/lib/pepperflashplugin-nonfree/libpepflashplayer.so (error: /usr/lib/pepperflashplugin-nonfree/libpepflashplayer.so: cannot open shared object file: Operation not permitted)
[57:57:0504/113111:ERROR:webplugin_delegate_proxy.cc(314)] Plug-in crashed on start
[Code] ....
I recently switched over to Debian 8 "Jessie" (64-bit Cinnamon flavor) on my Desktop.
250GB SSD
16 GB DDR3 RAM
i7 4790 Processor
AMD Radeon R9 280X
I have been able to play multiple games on Steam without any issues, however I have downloaded Ark: Survival Evolved and am unable to actually play that game in particular. I can log in and get to a point of choosing a server, but after it actually loads to the game(where it starts rendering graphics), the game crashes to the desktop. Below is the readout of the crash from when I loaded Steam via Terminal.
Code: Select all
Signal 11 caught.
ERROR: ld.so: object '/home/lukasz/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/lukasz/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
[Code] ....
I have noticed that the above (zenity:13343): Gtk-WARNING line in terminal is the point at which the game crashes. It would appear that the steam gameoverlayrenderer.so is a separate issue and may be a common occurence in the background that you just don't see.(?)
Things that I have done thus far:
-Verified that the video card is good
-Tried Open-source graphics drivers
-Currently using the AMD 15.9 Proprietary Drivers directly from AMD with Catalyst Control Center.
-Reinstalled "zenity" to ensure that it was not corrupted.
-Verified which Gtk+ versions that I have installed(see below)
Code: Select all
lukasz@Lukasz-Desktop:~$ pkg-config --modversion gtk+-2.0 gtk+-3.0
2.24.25
3.14.5
Is there a "default" gtk+ version that I have to alter for it to recognize that I have Gtk+ 3.0 installed, or did I miss something somewhere?
My hypothesis:
-It has something to do with 32-bit/64-bit conflictions(Maybe the game? My steam is 64-bit)
-My graphics card may not be supported by Ark: Survival Evolved yet.
-I am missing some libraries each time I have attempted different video drivers.
-Something with steam did not get installed correctly(I have not attempted to uninstall and reinstall it, however other games function correctly)
Iceweasel, Konqueror, makes no difference. Embedded flash videos make them crash every time. I had to install Flash Control on Iceweasel just to make it usable.
[pid 9417] --- SIGALRM {si_signo=SIGALRM, si_code=SI_KERNEL, si_value={int=1851877730, ptr=0x6e616962}} ---
[pid 9520] <... close resumed> ) = ? <unavailable>
[pid 9446] +++ killed by SIGALRM +++
[pid 9444] +++ killed by SIGALRM +++
[pid 9520] +++ killed by SIGALRM +++
[pid 9447] +++ killed by SIGALRM +++
+++ killed by SIGALRM +++
The kicker is I can't recall ever installing flash support in the first place.
I'm bitterly regretting the upgrade to 8.2. It's just one damn thing after another.
evolution crashing - memory error - openSUSE 11.3 / Evolution 2.30.1.2
openSUSE 11.3 / kernel 2.6.34.7-0.7 / Gnome 2.30.0 / Evolution 2.30.1.2
Evolution keeps crashing, began quite recently but I can't pin down exactly when...
Running from a terminal, crash messages are:
** (evolution:5624): CRITICAL **: file gkr-operation.c: line 350 (gkr_operation_request): should not be reached
** (evolution:5624): CRITICAL **: file gkr-operation.c: line 350 (gkr_operation_request): should not be reached
***MEMORY-ERROR***: evolution[5624]: GSlice: assertion failed: sinfo->n_allocated > 0
Aborted
I use Evolution as my calendar(which syncs with google calendar). It was alerting just fine up until a couple of weeks ago and just realized today that I'm not getting any sort of popup for appointments anymore.
View 2 Replies View RelatedI have been using Debian for about 2 years now, I have decided to use my email through Evolution (actually both my live and Gmail accounts). Right now my problem lies with Gmail so I will just mention that...
Evolution simply does not accept my gmail password when I log in. I have gone through the whole "Evolution Setup assistance" many times, and whenever the setup is done, and I proceed to open up the program and actually log in to my email> I enter my password and click "ok", and then the same login screen simply flashes and asks me to enter my password again! This is the entire problem. I cannot go beyond the login screen, and evolution simply asks me to enter my password again, and again, while never logging me in. And yes, the password is correct as I use the very same one to log into gmail's web interface several times a day. Imap is also enabled in my gmail account.
I have used Gmail's imap and smtp configuration information from [URL]..... and it simply does not work, even though I put all the information into Evolution Correctly.
Is there anyway to get evolution to not automatically print email attachments?
View 2 Replies View RelatedI am behind a university http proxy (squid) server and all of my internet connections have to go through it. I haven't been able to find any setting in Evolution that allows me to specify my proxy settings.
Searching on Google, it suggested that evolution can't work behind proxies and works only with direct connections to the internet.
I wanted to know if there is any way round this problem. I tried posting the same question on gnome list and gnome hacking list and no reply has come so far.
Evolution Mail 2.22.3.1 - Debian Lenny 5.0.4I configured Evolution in my gmail account. I can send successfully emails to users but I cannot receive any emails
View 4 Replies View RelatedI'm running Gnome on my desktop and going to keep it for now. I've read that Evolution is integrated into Gnome and I cannot remove it without deleterious effects. So, possible to disable it without negative effects? If so how to do that? The only problems I've had relating to Gnome have been Evolution. I'll just copy email links and paste them in Gmail.
View 14 Replies View RelatedCan anyone actually create an account with Evolution in Squeeze? The "Evolution Setup Assistant" won't take me past the "Importing files" dialog. When I press the Forward button, nothing happens. This is what I get when I press the forward button (running from a terminal): (evolution:9945): Gtk-CRITICAL **: Page flow is broken, you may want to end it with a page of type GTK_ASSISTANT_PAGE_CONFIRM or GTK_ASSISTANT_PAGE_SUMMARY
View 1 Replies View RelatedI opened a thread about this issue over two months ago, I opened thread at the Gnome board for the same issue but that board is dead. I never received a reply of any sort. Well Evolution used to work for me but after some updates it stopped working. A few weeks after that another update fixed it then another update came along and of course screwed it all up. Since then I am hoping some new update will fix it but no can do.Since my trouble started Evolution was even updated to a new version 2.30.2. Evolution does not connect to my mail POP server, as a matter of fact "send & receive" and the little icon bottom left on the status bar are grayed out. I have removed gnome and evolution and reinstalled with no results.
I switched to Icedove but when I forward emails Icedove gives me a header that is 10 times longer than the contain of the email itself. I could live with that if I only send emails to family and friends but I also send professional emails. I ended up installing a copy of MS Outlook for now but I really don't like it.
After installing Epiphany and Evolution, I am unable to paste any text into Evolution compose box and gnome-terminal. Neither Ctrl+V nor Rightclick>>Paste work. However, middle-mouse button click pastes text.
I am on Debian Squeeze.
PS: I am sure Ctrl+V doesn't work in gnome-terminal, but rightclick>>paste should work. And in evolution compose box both Ctrl+V and rightclick>>paste should work.
i updated to Sid and installed gnome minimal (gnome-core). But, there are 2-3 days ago, Totem and Evolution became gnome-core's dependancies. Actually on Sid, i use VLC and Icedove and when i want to uninstall Totem and Evolution, "aptitude" wants to remove gnome-core too. I would like to know if it's possible to remove these applications without uninstall gnome-core completly?
View 4 Replies View RelatedPreviously I was running Ubuntu 10.10. I have since migrated both of my machines to Debian 6.0.1. Before migrating I backed up my previous Evolution configuration, and after installing Debian I restored it from that file. Everything worked great except that backup included my UbuntuOne CouchDB address book, which I never used. When I right click it and click "Delete", nothing happens. I'm guessing the files in .evolution that contain this information are binary because I've done a locate ubuntu and couldn't find anything in there. It's not a deal breaker, but I'd like to get rid of this unused address book from a different OS.
View 2 Replies View RelatedI am having trouble getting evolution to work properly with my imap server. It won't show any messages. Icedove works fine, though. I'd rather use evolution because of the calendar. I'm not sure what I am doing wrong. The IMAP server is hosted by network solutions. I have screenshots of both clients. I've blacked out a few things for privacy.
Here are screenshots of evolution as configured:
Here are screenshots of icedove's configuration:
After recent update (yesterday) Evolution became almost unusable: if I am going to create a new e-mail or just select a person from Contacts or reply to someone it simply crashes. The update also didn't go very smooth - 15 updates were not applied because of a broken dependency - evolution-exchange, which depended on evolution prior to 2.30.0 but 2.30.1.2-2 was to be installed. Is there a way to make Evolution to work or upgrade solving dependencies?
View 3 Replies View RelatedAfter recent update (yesterday) Evolution became almost unusable: if I am going to create a new e-mail or just select a person from Contacts or reply to someone it simply crashes. The update also didn't go very smooth - 15 updates were not applied because of a broken dependency - evolution-exchange, which depended on evolution prior to 2.30.0 but 2.30.1.2-2 was to be installed. Is there a way to make Evolution to work or upgrade solving dependencies?
View 1 Replies View RelatedI'm a Linux noob. I'm using Karmic on a laptop with 1.5GB RAM and same as swap partition. Generally I'm happy with the mem usage. I have MySQL, SVN, Apache/PHP/xdebug, firefox w/ dev addons, Eclipse PDT and, of course, my music :) running at the same time, generally ok. I have the System Monitor's mem display on the top bar (dunno proper name) and can watch usage increase. Also the swap file's often only 100 - 300 megs.
However... from time to time I notice that as the programs' mem use gets close to 100% in the little sys monitor display the HD thrashes for 5 - 10 mins, after which some progs have silently crashed. AFAIR it always involves Eclipse (so maybe I should post on their boards), but not only. This last time I lost VLC and therefore my music. Obviously losing your music's far more important than losing some coding, so that's why I'm trying to resolve it now:)
I'm running Munin on my system (tho not because of this issue) and took a look at mem usage immediately before it happened. Here's the pic - you can see the sudden drop as the two progs (only AFAIK) closed on the very right side of the image. I'm not a guru here and am not sure if there's much to infer. I know some recommend 2xRAM for swap, but max committed was only 2.29 compared to potential 3, so that shouldn't be a problem? In fact the swap file never got large at all AFAICT. (Btw swappiness = default = 60.)
This comes at some point after installing GNS3 and Dynamips, which require administrator access as GUI's. Although, the first couple times I tried to run GNS3 as administrator, it worked fine. I do still receive the password prompt, whether running from the command line or the context menu. Note that GNS3 is the first application for which I've needed to run gksudo, so this may have been an issue before the above were installed, although I've always been able to run "Open as Administrator" in Nautilus and "Synaptic Package Manager," which now will not run either.
Running Ubuntu 10.10.
I tried installing Ubuntu 9.10 using both Ubuntu Desktop CD and the Netbook Remix on a EEEPC 1005HA with an external CD drive.
In both cases I don't get any graphical interface during the installation. The CD is apparently installing everything silently, without letting me change anything on the way, and then it gets stuck.
The only screen I get is the first one, with the options to "try Ubuntu" or "install Ubuntu".
What's going on?
I am working on a bash script which among its operations creates directories using the mkdir command. However, when the directory already exists mkdir mentions that in the command line output.
Is there any way I can make mkdir silently overwrite any existent directory? (no messages in the output). For the same price, could it be done with other commands such as cp or mv?
Using sendmail, I am trying to setup a catchall address to silently discard spam mail sent to undefined users. I don't want to bounce a reply for "no user" as this often goes back to munged or innocent addresses.
I have a number of domains, so my virtuser table currently looks rather like this:
Code:
The last line is the "catchall" which is intended to ensure that any undefined users from either my_domain.com or my_domain.co.uk is forwarded to the non-existent "catchall" user account. Note that all mail sent to my_domain.com is passed across to my_domain.co.uk at the very start so all the following rules should apply to messages received at both domains. (Both of these domains appear in the
Being non-existent, I setup the following rules in the access data table:
Code:
This way, if I send an email to 'user1@my_domain.com' it is received and delivered to user1@my_domain.co.uk, but if I send an email to 'rubbish@my_domain.com' it *should* be received and silently discarded.
Unfortunately what actually happens is the server responds with:
Now, (just for testing), I made "catchall" an alias for the "postmaster" account and the mail was then received and delivered into the postmaster mailbox. So I know the virtuser rule is working. The account "catchall", however, is not being silently dropped as desired in either configuration.