Debian Multimedia :: (Solved) Evolution Crashes In Squeeze After Recent Update?
May 19, 2010
After recent update (yesterday) Evolution became almost unusable: if I am going to create a new e-mail or just select a person from Contacts or reply to someone it simply crashes. The update also didn't go very smooth - 15 updates were not applied because of a broken dependency - evolution-exchange, which depended on evolution prior to 2.30.0 but 2.30.1.2-2 was to be installed. Is there a way to make Evolution to work or upgrade solving dependencies?
View 1 Replies
ADVERTISEMENT
Jul 24, 2010
After recent update (yesterday) Evolution became almost unusable: if I am going to create a new e-mail or just select a person from Contacts or reply to someone it simply crashes. The update also didn't go very smooth - 15 updates were not applied because of a broken dependency - evolution-exchange, which depended on evolution prior to 2.30.0 but 2.30.1.2-2 was to be installed. Is there a way to make Evolution to work or upgrade solving dependencies?
View 3 Replies
View Related
Apr 16, 2011
I run the 2.6.32-5-686 kernel on Squeeze and the bad nvidia drivers. A recent update, and pardon for not noting which, broke 3d games on my box. From a terminal neverputt yields the following error:
ignatius@lapbox 14:56 [ ~ ]:$ neverputt
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 137 (NV-GLX)
[code]....
I can mv xorg.conf to xorg.conf-pre and nexuiz will fire-up. Without 3d of course. I spent an hour or so last week going over my xorg.conf but it just ain't broke! Someone else saw it, too, and reported it but his post remains alone in the thread as of 10 minutes ago.
View 5 Replies
View Related
Jan 8, 2011
So far I have just used the CLI to upgrade KDE, and I get notified of upgrades once a day, where a popup shows when new upgrades are available. However, when I push the "install upgrades" button, nothing happens. In Gnome, all I had to do was click the update notifier and click install. I am pretty confident the same is posible in KDE4. I have searched the web trying to find a solution, but I can't find anything. I am probably missing some packages. Can someone help me configure:
1. Update intervals for the KDE update manager, and
2. GUI updates for the KDE4 desktop.
View 2 Replies
View Related
Mar 14, 2011
Just installed 64 bit Squeeze on a new build system Athlon quad core 3 GHz and 4 GB of ddr3 in a Gygabyte GA-870A-UD3 rev 2.1 mobo and I can't mount the floppy disk. The onboard controller is an ITE IT8720 chip. The floppy is a generic internal drive - Sony I think.I know the hardware is ok as various versions of Puppy linux mount and unmount it ok and.When I saved I got the message "Unable to mount floppy dev/fd0 is not a valid block device" editing back and saving got "Unable to mount floppy0 dev/fd0 is not a valid block device".Can anyone point me in the right direction?
View 4 Replies
View Related
Mar 30, 2011
Recent update is causing problems with the top and bottom panels not to show when I restart and or start my acer aspire one netbook. It takes several retries to try to get it to show. I don't know what the possible problem is my guess is the gdm3 is the one causing the problems.
View 1 Replies
View Related
Aug 17, 2010
Can anyone actually create an account with Evolution in Squeeze? The "Evolution Setup Assistant" won't take me past the "Importing files" dialog. When I press the Forward button, nothing happens. This is what I get when I press the forward button (running from a terminal): (evolution:9945): Gtk-CRITICAL **: Page flow is broken, you may want to end it with a page of type GTK_ASSISTANT_PAGE_CONFIRM or GTK_ASSISTANT_PAGE_SUMMARY
View 1 Replies
View Related
May 13, 2011
I've just installed Squeeze 6.01a from the xfce iso image on an old PIII which has been running Lenny with xfce without any problems. It's a fresh install after a reformat.
Sounds and multimedia apps like gxine and mplayer all worked fine on Lenny and other older versions. Now they don't - not gxine, not mplayer not even VLC. Run from the menu they all abort - and if run in an xterm they all crash with the following message -
Assertion 'pthread_mutex_unlock(&m->mutex) == 0' failed at pulsecore/mutex-posix.c:108, function pa_mutex_unlock(). Aborting.
View 3 Replies
View Related
Aug 10, 2011
since lamaresh is not being updated anymore and the wine packages from the official Debian repository are quite old there isn't really much choice for getting a recent version of wine anymore. Since I don't want to use the carbon project or the Mempis repository, as stated here, (at least yet) I have decided to build the package myself. Unfortunately I would like to have a 32bit version but am running a 64bit version of Debian Squeeze. When I run ./configure I get the following message at the end.
[Code]...
View 1 Replies
View Related
Feb 1, 2010
i try to install a recent squeeze of this January on a new laptop, HP dv6-2044el. The installation get blocked on the "Detect network hardware" step. The network interface is a "Realtek RTL8168d/8111D Family PCI-E GBE NIC controller".
View 1 Replies
View Related
Jun 1, 2010
I have been having problems with Squeeze last day or so, but thought would do all system updates available in hope this would stop the system crashes only to find that upon reboot my dock of choice, Cairo-Dock, which is set to auto start puts a message on screen saying it has no plugins available and that it will not run as a result. And it just won`t run. The update included updates for Cairo Dock and it`s plugins, which it seems have all updated correctly and package manager says every available plugin IS installed as it was before, what I can do to correct this annoying issue?
[Code]....
View 4 Replies
View Related
Jun 14, 2010
I've been using the testing branch for quite some time with no major issues. However, yesterday's upgrade (I run dist-upgrade roughly every day or two) I've been experiencing some very low FPS rate - about 150-250 according to glxgears. My gfx card is a bit old - Radeon Xpress 1100 (200M).
Xorg.log and syslog are both fine. I've tried forcing the "radeon" video driver in xorg.conf as well as the automatic "ati" value without any effect.
It could be a bug, or it could be something resulting from the upgrade of any of the packages.
View 2 Replies
View Related
Jan 30, 2010
After a system update a couple of days back - which as far as I can remember included some xorg packages - neither of the policy files I have written for my keyboard, synaptics touchpad and mouse work.Below are the files and the Xorg log file.
99-x11-keyboard.fdi
<?xml version="1.0" encoding="UTF-8"?>
<deviceinfo version="0.2">
[code]...
View 4 Replies
View Related
Oct 21, 2010
It was no surprise that I needed to reinstall the nvidia driver after a 2.6.32-5-686 kernel update a couple days ago, but I was surprised that it didn't work. I've had to drop back to a kernel I compiled a few weeks ago, which is basically the stock 2.6.32-5-686 from that time, with a timer frequency of 1000 and desktop preemption.
Vid card is GeForce PCX 5750
Using NVIDIA-Linux-x86-173.14.22-pkg1.run
This is the command I used:
env CC=/usr/bin/gcc-4.3 sh NVIDIA-Linux-x86-173.14.22-pkg1.run
(After it didn't work, I ran it with --uninstall and tried installing again. No luck with that.)
Here's the nvidia installer log (sorry about the encoding. I don't know what happened with that): [URL]
rivafb, nvidiafb and rivatv are not loaded.
I don't see it in this one, but on a previous attempt, I saw an error message that said no nvidia graphics card was found. I've been suspicious that the card is slowly dying, based on problems like gray blocks on the screen or (in an older lenny install) persistence of the contents of a window appearing inside a terminal, when I switch desktops from the one where the browser is open to the one where the terminal is open. Scrolling the artifact off-screen and back, or window-shading the terminal and then un-shading it causes it to re-draw correctly.
View 2 Replies
View Related
May 26, 2011
I need to install a Linux distribution at work and I'd like to give Debian a try (I've been using Gentoo for years at home). But as it's a Windows environment, I'm currently trying to see how Debian could cope with that, meaning how to register to LDAP (I found this: http://www.ccs.neu.edu/home/battista/do ... index.html), get mails from MS Exchange, I saw that for other distributions, they were talking about evolution-mapi to achieve the mail retrieval from MS Exchange, but I saw that the package is not part of Debian Squeeze.Did I see correctly (sorry, Debian noob here )?Is there an alternative?
View 4 Replies
View Related
Aug 20, 2010
Today, I installed the recent kernel security update (i.e. 2.6.32-24-generic #41-Ubuntu SMP). After a reboot, the sound is gone.
From my user account:
mpc@awd:~$ alsamixer
cannot open mixer: No such file or directory
Same problem with "aumix".
However, the commands "sudo alsamixer" and "sudo aumix" seem to work (but still no sound).
"lsmod | grep snd" will give
snd_hda_codec_atihdmi 2367 1
snd_hda_codec_realtek 203310 1
snd_hda_intel 21941 0
[Code]....
View 6 Replies
View Related
Aug 8, 2011
After recent upgrade which contained the newer kernel ( 2.6.35-30-generic). I've started to experience problems with sound and video in programs - deadbeef and totem. Both of them dont play any sounds and video in totem is skipping every 3-4 seconds (the same applies to flash videos in browser).
As I run deadbeef from the command line I dont get any significant information. I run ubuntu 10.10 amd 64. I tried to reinstal gstreamer my programs and codecs with no luck.
View 4 Replies
View Related
Aug 19, 2011
I have been dsitro skipping around. Reinstalling the new versions every six months, only to find more major drawbacks recently with ubuntu. I fixed a major problem with adobe flash being majorly slow on my hardware by following the debian flash guide, what a life saver. I now love my linux system, flash was always a pain, made me appreciate windows. I thought I might try a rolling release distro (PCLinuxos is pretty good but I couldn't install office in wine). I heard about the speed of debian - the mother of all distros. But when I tried debian stable, I had hard crashes so I decided to try Wheezy instead.
Now I seem to be sitting pretty. With one exception, the latest 0.41 update of the AWN window manager breaks the awn applets. I have locked the version at 0.4 by going back to the stable branch that worked. But I would rather not have to check to see if the next updates is going to break them again. There were some more updates recently to awn-applets not sure if they fixed this problem. Why was this update released in the first place, when it breaks down awn almost completely ? without the applets it's almost useless. It's probably something simple like changing the directory but still annoying.
View 2 Replies
View Related
Feb 1, 2011
I've recently noticed that my IEC958 digital audio output has stopped working. The short version of why I didn't notice this immediately is that I have two simultaneous audio outputs from my system to my speakers and I hadn't realized the IEC958 output wasn't in use.After messing around with a few settings to no avail, I remembered that I'd recently run update manager (this had to be within the last two weeks) and thought this might be the cause.I have just booted to a 10.10 install disc and verified the IEC958 output works fine there.
Unfortunately I'm not sure which of the recent updates could have caused this problem. Before I submit a bug report on launchpad I was hoping anyone here might have a suggestion as to where to look to figure this out.I'd recently seen this thread and this thread which lead me to believe it may have been a recent kernel update.What's my best course of action to determine the problematic update?[edit]In case anyone needs the info, I'm running Ubuntu 10.10 64 bit on a system with an Intel DH57JG motherboard. Using the HDMI output to a TV, with a separate optical audio cable to my speakers.Also, I've attempted using all of the available digital audio output options in the sound preferences panel and I've also installed gnome-alsamixer and tried enabling/disabling every digital output listed there as well. None of these got the optical output working again.
View 4 Replies
View Related
May 18, 2010
Using the howto at http://wiki.debian.org/skype I installed Skype 2.1 beta 2. It launches OK using either skype or linux32 skype and brings up the login screen. It already has my username but when I enter my password skype crashes before logging me in. I get the error:
Inconsistency detected by ld.so: dl-open.c: 643: _dl_open: Assertion `_dl_debug_initialize (0, args.nsid)->r_state == RT_CONSISTENT' failed!
I know this is a long shot since skype isn't open source, but does anyone have a workaround?
View 1 Replies
View Related
Oct 30, 2010
Anyone else notice that the recent updates have trashed Swiftfox? Here's the error message: Quote: MozPlugger: Error: Too many types (32) for handler 22 (application/vnd.sun.xml.writer:sxw:OpenOffice Writer 6.0 documents)
Opera, Seamonkey and Firefox all work fine and if I open Firefox and then open Swiftfox, it's working just fine, so apparently FF handles the OpenOffice, etc., issues for it. It still fails if you have opened Seamonkey or Opera first.
View 2 Replies
View Related
Apr 10, 2011
I have a feeling this is going to be something no one cares about enough to have bothered with, however, just in case someone else got frustrated enough to figure this out I thought I would ask.I have an associate I send and receive a lot of email with. They have one email they use rarely (once a month) and another they use all the time. The problem is that evolution always shows the one they use rarely first.
That is, when I partially type in their name in the "to" field those two email addresses will list in a drop down. I would like to either remove the rarely used email address from the list or have evolution list from most recently used (like "The Bat!" does, a Windows email client I use) instead of however it does it now, presumably it's just in alphabetical order.Right now about 20% of my emails go to this other email address because I'm busy, in a hurry, tired or whatever and just forget that it defaults to the wrong one all the time and it's caused the occasional problem.
View 7 Replies
View Related
Oct 1, 2010
I've a ATI HD 4290 video-card and I installed the closed drivers of ATI/AMD. Everything worked fine until I updated Ubuntu. Yesterday, I received an automatic update from the Ubuntu-servers and I accepted this update.
But after I updated everything and restart my computer, X.org won't work. When I start my computer, I get this. (Translated: Your monitor, video card and your input devices couldn't be detected correctly. You have to choose manually the correct settings.)
View 9 Replies
View Related
Aug 31, 2010
I recently did an update squeeze and the next day after I restarted there was only a blank screen.The laptop started, the system installed, the wifi connected but no gdm.I started in recovery mode and tried;
# invoke-rc.d gdm start, and got the response that it was an invalid command or words similar to that.
# startx, gives me a blank screen with an unblinking cursor.
# apt-get install gnome, tells me that the latest version is already installed.
If it has any bearing on the issue, I dual boot with Ubuntu and that works fine.Is there anything to be done to fix the problem?
View 14 Replies
View Related
Mar 23, 2011
I have an offline machine and the full 8 DVD repository set and have added them to the system and they work fine to install packages. I used jigdo to download the update 6.0.1 DVD and the "packages" file and the one inside of "packages.gz" are empty files. This prevents the disk from working at all. I'm not sure who to report this to.
View 4 Replies
View Related
Jul 20, 2011
I had/have an old program which works on XP called PaperPort. It allows me to edit and fill in blank forms. I have been searching for something like that for Linux, and to date found nothing, Chances are that I am looking in the wrong places.
View 2 Replies
View Related
May 5, 2011
How do you mark a thread as solved?
View 5 Replies
View Related
Jul 8, 2011
I cannot update my system either with Update Manager nor with Synaptic. The system tries to download the updates, and then generates an error message that I have broken packages. So, I click on Fix Broken Packages, etc., and when running get the following error message:
E: /var/cache/apt/archives/libavcodec52_5%3a0.6.3-0.0_i386.deb: short read on buffer copy for backend dpkg-deb during `./usr/lib/i686/cmov/libavcodec.so.52.72.2'
This appears to me to be a system bug. I'm running the 32-bit version of Squeeze. Re-install, or ?
View 4 Replies
View Related
Feb 12, 2010
I just did an update of my Debian system from lenny to squeeze as described here. I got some errors during the install, saying that glibc couldn't be updated. I did an apt-get -f install, which gives me the following warning: WARNING: this version of the GNU libc requires kernel version 2.6.18 or later. Please upgrade your kernel before installing glibc.
The installation of a 2.6 kernel could ask you to install a new libc first, this is NOT a bug, and should NOT be reported. In that case, please add lenny sources to your /etc/apt/sources.list and run: apt-get install -t lenny linux-image-2.6 Then reboot into this new kernel, and proceed with your upgrade dpkg: error processing /var/cache/apt/archives/libc6_2.10.2-2_i386.deb (--unpack): subprocess new pre-installation script returned error exit status 1 Errors were encountered while processing:
[Code]...
View 2 Replies
View Related
Apr 13, 2011
While on the 32 bit version i haven't problem. I use different profile for the stable and the nigthly versions. Note: I use the binary taken directly from mozilla and update regulary it directly from the browser. On the attachment you can see what should be appear after the update.
View 2 Replies
View Related
